Hello all.
I was wondering if there was a simple Import statement I could use in SQL to import an Access Table into SQL Server 2005.
I know how to use the SSIS Import/Export Wizard, but that seems excessive to import a single 204 record table
Any help on this would be greatly appreciated.
Hi all,
Hopefully I am posting this question in the correct forum. I am still learning about SQL 2005. Here is my issue. I have an access db that I archive weekly into and SQL server table. I have used the dst wizard to create an import job and initally that worked fine. field I have as the primary key in the access db cannot be the primary key in the sql table since I archive weekly and that primary key field will be imported several time over. I overcame this initally by not having a primary key in the sql table. This table is strictly for reference. However, now I need to setup a unique field for each of the records in the sql table. What I have done so far is create a recordID field in the sql table that is an int and set as yes to Identify (auotnumber). That worked great and created unique id for all existing records. The problem now is on the import. When I try to import the access table i am getting an error because of the extra field in the sql table, and the error is saying cannot import null value into this field. So... my final question is how can I import the access table into the sql table with one extra field which is the autonumber unique field? Thanks a bunch for any asistance.
Bill
Good morning one and all,
I have some queries that were written in access that I need to port into SQL 7, the whole process is boring and mundane. Does any1 know of a translator (i.e. access sql to t-sql) or a reference to the differences between access SQL and t-Sql.
Any and all help appreciated,
Thanx Gurmi
Hi,
I have 2 tables,
MembersTemp and Organisations
I'm trying to extract the organisation Name from the organisations table but am unsure of the sql statement to do this.
Initiallt I only have the ExecID for the MembersTemp table
MembersType table:
ExecID 3013
OrganisationID 4550
Organisation table:
ID 4550 (PK)
Name "Microboff"
Any ideas??
Can anyone please give me the equivalent tsql for sql server 2000 for the following two queries which works fine in sql server 2005
1
-- Full Table Structure
select t.object_id, t.name as 'tablename', c.name as 'columnname', y.name as 'typename', case y.namewhen 'varchar' then convert(varchar, c.max_length)when 'decimal' then convert(varchar, c.precision) + ', ' + convert(varchar, c.scale)else ''end attrib,y.*from sys.tables t, sys.columns c, sys.types ywhere t.object_id = c.object_idand t.name not in ('sysdiagrams')and c.system_type_id = y.system_type_idand c.system_type_id = y.user_type_idorder by t.name, c.column_id
2
-- PK and Index
select t.name as 'tablename', i.name as 'indexname', c.name as 'columnname' , i.is_unique, i.is_primary_key, ic.is_descending_keyfrom sys.indexes i, sys.tables t, sys.index_columns ic, sys.columns cwhere t.object_id = i.object_idand t.object_id = ic.object_idand t.object_id = c.object_idand i.index_id = ic.index_idand c.column_id = ic.column_idand t.name not in ('sysdiagrams')order by t.name, i.index_id, ic.index_column_id
This sql is extracting some sort of the information about the structure of the sql server database[2005]
I need a sql whihc will return the same result for sql server 2000
I have to deal with an environment where the developers create and modify tables at will, and the tool they use does not check if the table created is over the 8060 limit for a table. I have a sql statement below which checks the size for me, but I can't figure out how to put a where clause on it to check for the size being over 8060. I i have over 1000 tables to check and was going to write a cursor routine to check it and print it, but I need te where clause to work.Any help appreciated
select Name=left(c.name,20),
c.prec, scale = ISNULL(c.scale,0),
t.name from syscolumns c inner join systypes
t on c.xtype = t.xtype where id in
(select id from sysobjects where name = 'mh_demographic2_')
order by c.colid COMPUTE sum(c.prec)
I've tried to import a text file into a table using the Import/export wizard.
My problem starts with some columns that should have NULL values (i.e. zero-length string) but the wizard doesn't recognize that it's NULL.
How do I solve the problem?
Thanks,
Mich
Hi guys,
Working on a MS Access database, I have a table named "myTable" which contains several fields.
I just want to retrieve all the fields (columns) in the myTable, without retrieving Col1 and Col2
What should my SQL string be?
SELECT * (not Col1, Col2) FROM myTable
Thanks in advance for any help.
Aldo.
I am using the Bulk Insert command and trying to import a CSV delimited text file into a table and I am having problems with the quote field delimiters ", " The command below works but it takes in all the "" quotes as well and the field delimiter comma , works only if the commas are the separators only. If I have a comma within a address field for example then the data gets imported into the wrong fields. What can I use to identify that the text qualifier is ". I don't see where I can use the bulk insert command to determine this. Is there another command that I can use or am I using this command incorrectly. I thank you in advance for any response or suggestion you may have.
BULK INSERT AdventureWorks.dbo.MbAddress
FROM 'a:mbAddress.txt'
WITH (
DATAFILETYPE = 'char',
FIELDTERMINATOR=',',
ROWTERMINATOR='',
CODEPAGE = '1252',
KEEPIDENTITY,
KEEPNULLS,
FIRSTROW=2)
Here is a sample ascii file I am importing as well you can see that 6330 has a extra comma in the address line.
"AddressAutoID","Memkey","Type","BadAddress","Address1","Address2","Address3","City","State","Zip","Foreign","CarrierRoute","Dpbc","County","CountyNo","ErrorCode","ChangeDate","UserID"
6317,26517,1,0,"1403 W. Kline Ave","","","MILWAUKEE","WI","53221","","",0.00,"MILWAUKEE",79,"",1/25/2006 0:00:00,"admin"
6318,26225,1,0,"501 Dunford Dr","","","BURLINGTON","WI","53105","","",0.00,"RACINE",101,"",1/25/2006 0:00:00,"admin"
6319,20101,1,0,"2115 Cappaert Rd #35","","","MANITOWOC","WI","54220","","",0.00,"MANITOWOC",71,"",1/25/2006 0:00:00,"admin"
6320,23597,1,0,"728 Woodland Park Dr","","","DELAFIELD","WI","53018","","",0.00,"WAUKESHA",133,"",1/25/2006 0:00:00,"admin"
6321,23392,1,0,"7700 S. 51st St","","","FRANKLIN","WI","53132","","",0.00,"MILWAUKEE",79,"",1/25/2006 0:00:00,"admin"
6322,26537,1,0,"W188 S6473 GOLD DRIVE","","","MUSKEGO","WI","53150","","",0.00,"WAUKESHA",133,"",1/26/2006 0:00:00,"admin"
6323,25953,1,0,"3509 N. Downer Ave","","","MILWAUKEE","WI","53211","","",0.00,"MILWAUKEE",79,"",1/26/2006 0:00:00,"admin"
6324,19866,1,0,"10080 E. Mountain View Lake Rd. #145","","","SCOTTSDALE","AZ","85258","","",0.00,"MARICOPA",13,"",1/27/2006 0:00:00,"admin"
6325,25893,1,0,"W129 N6889 Northfield Dr. Apt 114","","","MENOMONEE FALLS","WI","53051-0517","","",0.00,"WAUKESHA",133,"",1/27/2006 0:00:00,"admin"
6326,26569,1,0,"8402 64th Street","","","KENOSHA","WI","53142-7577","","",0.00,"KENOSHA",59,"",1/27/2006 0:00:00,"admin"
6327,24446,4,0,"83 Sweetbriar Br","","","LONGWOOD","FL","32750","","",0.00,"SEMINOLE",117,"",1/30/2006 0:00:00,"admin"
6328,19547,1,0,"4359 MERCHANT AVENUE","","","SPRING HILL","FL","34608","","",0.00,"HERNANDO",53,"",2/8/2006 0:00:00,"admin"
6329,26524,1,0,"264 Lakeridge Drive","","","OCONOMOWOC","WI","53066","","",0.00,"WAUKESHA",133,"",2/10/2006 0:00:00,"admin"
6330,23967,1,0,"3423 HICKORY ST","100 Tangerine Blvd., Brownsville, TX 78521-4368","Texas Phone Number: 956-546-4279","SHEBOYGAN","WI","53081","","",0.00,"SHEBOYGAN",117,"",2/15/2006 0:00:00,"admin"
6331,25318,1,0,"3960 S. Prairie Hill Lane Unit 107","","","Greenfield","WI","53228","","",0.00,"MILWAUKEE",79,"",2/20/2006 0:00:00,"admin"
6332,24446,1,0,"83 Sweetbriar BR","","","LONGWOOD","FL","32750","","",0.00,"SEMINOLE",117,"",2/21/2006 0:00:00,"admin"
6333,26135,1,0,"P.O. Box 8 127 Main Street","","","CASCO","WI","54205","","",0.00,"KEWAUNEE",61,"",2/21/2006 0:00:00,"admin"
I have one column in SQL Server 2005 of data type VARCHAR(4000).
I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.
now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.
Could you please let me know what is the reason?
I know that memo data type does not supported into the SQl Server 2005.
I am with SQL Server 2005 Standard Edition with SP2.
Please help me to understans this issue correctly?
I have an access database that i upsized a few weeks ago and i need to add another table form that database, however when i use the DTS import wizard to get the particular table i wish i get as far as picking the table but i cant preview or do the import, i get the following error message on it!
Error Source: Microsoft Jet Database, Error Description: record(s) cannot be read; No permission on the table 'InternetBilling', Context: error calling openrowset on the provider.
Ive working on a copy of the access database and given all user groups read persmission and im still getting this, how do i get around it?
With much thanks for any help,
Amit
Guys,
I am new to DTS 2005; having trouble on how to connect to MS Access to pull data? what kind of connection manager should I use (OLE?) and what specific Data Flow Source type? Please respond.
Thanks
I have a database full of different types of leads some for company A some for company B and so on, each doing a different service. However the leads from B can be used for A and leads from A can be used for B, so I want to merge the data.
Example:
Phone Number Name Home Owner Credit Insurance
727-555-1234 Dave Thomas Yes B
727-555-1234 Dave Thomas Gieco
I would like the end result to be one record:
Phone Number Name Home Owner Credit Insurance
727-555-1234 Dave Thomas Yes B Gieco
Since these were imported into SQL they all have a unique ID, here are the current labels
ID,phone_ number,first_ name,last_name,address1, address2, address3,city,state,postal_code,HOME_OWNR,HH_INCOME,CREDIT_RATING,AGE,MATCH,source_id,
title,comments,dnc_flag,provider,vehicle,coverage,alt_phone,email,marital status,dob
why is this the case when importing to sql server 2005?
View 3 Replies View Related
I hope I am giving the right information here to get help with this.
I am trying to get information from two tables that are in an access database over to sql 2005. I did this via dts and saved the import options as a file, but when I run this as a job I get the following error: Date 2/27/2008 11:14:08 AM
Log Job History (CombinationTable1)
Step ID 0
Server D86J0PD1
Job Name CombinationTable1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User BIZCHAIRDarleneMurphy. The last step to run was step 1 (CombinationTable1).
I have also tried to run this in the following way:
USE Combination_Table
CREATE TABLE GG Products
AS
SELECT *
FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'W:MASTER DOCUMENTSDatabasesChannel_Advisor_Feed.mdb';'admin';'', GG Products)
go
Here I get errors regarding nulls and if I pointed to the correct database, which I have.
Any help with this problem and I hope I have given good information in order to get help.
Thank you
Dee
Hello, everyone:
I know it is a simple question. I am writing a query to import a table (MyTable) from an Access Database (MyDatabase.mdb). MyDatabase.mdb is in C: in local. This is the query from BOL.
SELECT a.*
FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'c:MyDatabase.mdb';'admin';'mypwd', MyTable) AS a
By BOL, admin and mypwd should be user_ID and password. But I am doing testing in local, and don't set user_ID and password. How to handle two things.
Thanks
YTZ
Is it possible to import an MS-Access database (or table) into a new SQL Server 2005 Express database? If so, how is it done?
View 1 Replies View Relatedgot some MS Access SQL Code that needs converting into TSQL:
SELECT dbo_qryMyServices.FormsServiceID,
dbo_qryMyServices.ServiceName, Sum(IIf(IsNull([CompletionDate]),0,1))
AS Completed,
Count([pkServiceID])-Sum(IIf(IsNull([CompletionDate]),0,1)) AS
Uncompleted, Count(dbo_MyServiceRequests.pkServiceID) AS TotalCount
FROM dbo_qryMyServices LEFT JOIN dbo_MyServiceRequests ON dbo_qryMyServices.FormsServiceID = dbo_MyServiceRequests.PostType
GROUP BY dbo_qryMyServices.FormsServiceID, dbo_qryMyServices.ServiceName
ORDER BY dbo_qryMyServices.ServiceName;
because it's Access and got VBA stuff in it - IIF and ISNULL, I can't figure out how to make it work in proper SQL.
Any help would be most appreciated!
Hi,
I'm about to embark on writing some code in perl or VBscript that automatically synchronises a constantly updated Access database with an MSSQL database.
I know MSSQL has an import tool built into Enterprise manager but I'm wondering if theres a stored procedure that does this?
The way I'm thinking of doing it is to read the all the access tables into separate hash arrays and then INSERTing them into the MSSQL database after checking for any duplicates. This all sounds a bit time consuming (there are a large number of tables) and processor intensive.
If anyones done anything like this before, I'd love to hear their views......!
Thanks!
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
Hello,
I am using the SSIS import/export wizard to import an Access table into a sql server 2005 database. The table has fields in Arabic (name, last name, etc.) and non-Arabic fields (gender, phone number, category, etc.).
The destination table has nvarchar columns.
After the import, I can see the Arabic characters in the destination table, but they appear in inverse order (from left to right). In Access (or Excel), Arabic fields appear as they should (from right to left) and non-Arabic fields are OK as well (from left to right).
If I do a simple copy-and-paste of a "correct" Arabic text into the table, the result is still wrong (inversed letters)...
Please help, I can't see what else to do.
Thank you.
can i import my Access queries into SQL Server, i've tried and all it does is create new tables with the data form the queries
View 2 Replies View RelatedHi all,
I need advice on how to get data from xml file into the preexisting table. Right now I have a process that scrapes data from the website and generates xml file everyday. I need to get this data into sql table every night and I would like to make this automated process. What do I need to use in sql to accomplish this? It would be great if you can point me to a tutorial or give me few pointers.
Thanks!
I have a ms access database on say c:database.mdb
I have a sql server 2000 running too.
I want to use some command line tool , like isql or osql to convert this database into a sql sever database.
How can I achieve this ?
Thanks in advance.
Alok.
We are attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few questions.
1) Some of the Access tables have a single field for combined date time with the Access data type set to Date/Time and no formatting set. When the conversion happens these become text data type in the SQL Server. Is there a way to have these become either the smalldatetime SQL Server data type or datetime SQL Server data type?
2) On some other Access Tables with the data type set again to Date/Time again no formatting is set but some columns are dates with the date in the Short Date format, and some columns are times in the Short Time format. Some of these columns may contain null values. This is causing the following error.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
We thought maybe it was due to the naming of the one field as "Time" so we changed the name of that field but again the same error occurs but with the new field name.
When we click on the transform button to view the data types none of them are listed as timestamp.
Is it possible that the DB Admin saved some tables and then later on tried to add tables to the same database that is causing this error?
Are we better off trying to import the table structure first and then fill the tables later?
Any help is appreciated.
Miranda
Hi there,I have a situation where an application needs to import data fromnumber of access mdb files on a daily bases. The file names changeevery day. The data import is very straight forward:insert into sql_table select * from acess_tableThere are up to 8 tables in each access file and some access files willhave less. So the process needs to figure out which tables exist inAccess mdb file and import them whole into sql staging tables.Any recommendations are appreciated.Thanks
View 2 Replies View RelatedHello,
This seems like such a simple problem but I am new developer even through I have been on the administration end of things for some time. I will go into more detail about my tables and there relationships below. Anyway, I am trying to create a many-to-many relationship within ms sql server 2005. I have created both of my primary tables and also a junction table per the directions on microsoft's website all per ms's instructions as stated here...
http://msdn2.microsoft.com/en-us/library/ms178043.aspx
At then end of these instruction it states as a NOTE: The creation of a junction table in a database diagram does not insert data from the related tables into the junction table. For information about inserting data into a table, see How to: Create Insert Results Queries (Visual Database Tools).
http://msdn2.microsoft.com/en-us/library/ms189098.aspx
and these directions do not go into detail on how to do an insert on a junction table. And I cant find out how to do this anywhere on the internet... I did create a T-SQL INSERT statement in a trigger as listed below but I end up getting an error AS LISTED BELOW....
Here is how I set everything up...
PetitionSet table consists of:
PetitionSetID int auto-increment primary key
PetitionSetName varchar(50) no nulls
PetitionSetScope varchar(50) no nulls
the Petition table consists of:
PetitionID int auto-increment primary key
PetitionSetID int no nulls
PetitionName varchar(50) no nulls
the SetToPetitionJunction table consists of:
PetitionSetID int
PetitionID int
And, there is a composite key made up of both the PetitionSetID and PetitionID fields.
I have created the foreign key relationships with DEFAULT VALUES from the SetToPetitionJunction table to each column's respective corresponding column in each of the tables: PetitionSet and Petition.
The trigger is on the Petition table and it has the following code:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: Name
-- Create date:
-- Description:
-- =============================================
ALTER TRIGGER .[SetToPetitionJunctionTrigger]
ON .[dbo].[Petition]
AFTER INSERT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
INSERT INTO SetToPetitionJunction
(PetitionID, PetitionSetID)
SELECT Petition.PetitionID, PetitionSet.PetitionSetID
FROM Petition INNER JOIN
PetitionSet ON Petition.PetitionSetID = PetitionSet.PetitionSetID
END
I have created an asp.net 2.0 front end to insert values into the PetitionSet table and the Petition Table. And in the detailsview for the Petition table I manually insert the PetitionSetID field to the number that corresponds to an auto-generated number on the primary key of the PetitionSet table. So I am maintaining referential integrity...
The first time it works and inserts one record in the Junction table containing the PetitionSetID from the PetitionSet table and the PetitionID from the petition table.
Then when I try to add in another petition for the same petition set number just like I did the first time and then I get this error...
Violation of PRIMARY KEY constraint 'PK_SetToPetitionJunction'. Cannot insert duplicate key in object 'dbo.SetToPetitionJunction'.
The statement has been terminated.
David
All Rights Reserved in All Media
hi. this is a beginner question as i am new to databases :)so, I have an access database and I want to take 2 tables from it and copy it to sql server in my ASP.NET application (.MDF file)I have visual studio 2005 installed on my computer and got no sql server 2005 installed on it. what is the way copy 2 tables to the ASP.NET database application?thanks alot guys.
View 2 Replies View Related[Note: originally posted this on microsoft.public.sqlserver.programmingbut had no luck there...sorry if you're seeing this twice]Some facts:1) I have an Access database (.mdb file) sitting on my harddrive.2) I have Visual Studio 2005, Sql Server Express, and Sql ServerManagement Studio Express.3) I do *not* have Microsoft Access.What I'm trying to do:I simply want to import the Access database into Sql Server Express. Inother words, I want to end up with a Sql Server Express database thathas all the same tables, keys, and relationships as the Access databaseas well as all the data from it. I can live without the queries storedin the Access database, but those would be nice too.What I've tried so far:I'm able to connect to the Access database using the "Linked Servers"features in Management Studio Express. From there, I was able to writesome simple Transact-SQL queries to find out what tables are in theAccess database and copy them, one at a time, into a Sql Server Expressdatabase.This is definitely a good start, but it doesn't take care of theprimary keys or foreign keys. There appear to be procedures for thoseas well (sp_primarykeys, sp_foreignkeys), but I keep thinking theremust be an easier way.Which brings me to...Questions:Without having to buy additional software/tools, can I import thisAccess database without a lot of programming? If so, how?Thanks in advance,-Dan
View 1 Replies View RelatedI have a table in MS Access that I would like to copy/import into SQL Server 2005. I would like to automate this process so that it copies the table over on a daily basis. Can someone tell me how this can be done?
Thank you in advance.
Hi,
I have an Access 2003 front end that contains a number of linked tables on SQL Server 2005 SE. I recreated the application on a second network for testing and was able to use the Linked Table Manager to refresh the database connections. The problem is when I try and add another linked table. I select Link Tables from the menu and then when I select 'ODBC Databases()' from the 'Files of Type' list box, the Link window closes right away.
Any suggestions?
Hi,
I need to import an SQL string from MS Excel 2003 to SQL SERVER 2000.
The string I need to import is composed by 5 different several blocks and looks like:
Code Snippet
CommandLine01 = "USE mydb"
CommandLine02 = "SELECT Block ..."
CommandLine03 = "GO
ALTER TABLE Block...
GO"
CommandLine04 = "UPDATE Block..."
CommandLine05 = "SELECT Block..."
The detail of the SQL string is at:
http://forums.microsoft.com/msdn/showpost.aspx?postid=2093921&siteid=1&sb=0&d=1&at=7&ft=11&tf=0&pageid=1
I am trying to implement OJ's suggestion:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2117223&SiteID=1
to use multi - batch processing to import the string to SQL SERVER, something like:
Code Snippet
Dim SqlCnt, cmd1, cmd2, cmd3
'set the properties and open a connection
cmd1="use my_db"
cmd2="create table mytb"
cmd3="insert into mytb"
SqlCnt.execute cmd1
SqlCnt.Execute cmd2
SqlCnt.Execute cmd3
Below is the code (just partial) I have, and I need help to complete it.
Thanks in advance,
Aldo.
Code Snippet
Function TestConnection()
Dim ConnectionString As New ADODB.Connection
Dim RecordSet As New ADODB.RecordSet
ConnectionString = "Driver={SQL Server};Server=myServer;Database=myDBName;Uid=UserName;Pwd=Password"
ConnectionString.Open
CmdLine01 = " USE " & myDB
CmdLine02 = " SELECT ACCOUNTS.FULLNAME FROM ACCOUNTS" ...
CmdLine03 = "GO
ALTER TABLE Block...
GO"
CmdLine04 = "UPDATE Block..."
CmdLine05 = "SELECT Block..."
RecordSet.Open CmdLine01, ConnectionString
RecordSet.Open CmdLine02, ConnectionString
ConnectionString.Execute CmdLine01
ConnectionString.Execute CmdLine02
'Retrieve Field titles
For ColNr = 1 To RecordSet.Fields.Count
ActiveSheet.Cells(1, ColNr).Value = RecordSet.Fields(ColNr - 1).Name
Next
ActiveSheet.Cells(2, 1).CopyFromRecordset RecordSet
'Close ADO objects
RecordSet.Close
ConnectionString.Close
Set RecordSet = Nothing
Set ConnectionString = Nothing
End Function
I hope this is the right forum for my question.
I'm developing a website for a Prepaid Calling Cards distributor. Each of the cards they sale have a list of the countries the card is good for. I need to import this data into my countries_rates table. The file they are giving me is an excel file that contain 3 colums (fields)
1- Country-Name
2- Rate
3- Card_$_Price
these files contain aproximaly 400 rows so it will be a hasle to have to insert it manually every week.
In my web application I need to create a form where the user will select the card from a dropdownlist and then find the excel file to be imported for that card.
I would like to know how do I do that with Visual Studio 2005, SLQ 2005 and C#
please direct me to some links where I can learn how to do this or please send me some code snips I can see how is done.
Tia
Charles