Is There A Command That Would Stop A Sql Query At A Certain Point?
Jan 22, 2008
I was wondering if there was a command in SQL that you could enter that would stop the execution of a query at a specified spot.
For instance if you were debugging what a batch of update queries were doing to a table and you wanted to stop it at a specific point. I realize you can select the code you want to run, but I would prefer to enter something at a point that stays whether I am selecting it or not. That way when I am looking at a 1000 lines of code I don't have to remember everytime how much to select .
So are there any commands like that? I was thinking something like 'Stop' in VBA but that doesn't work
View 4 Replies
ADVERTISEMENT
Feb 26, 2008
Hey Guys, I have a question. I know you can put a 'STOP' command in VBA code. Is there something like that for SQL Server Stored Procedures?
View 3 Replies
View Related
Mar 26, 2008
Hello all,
First off, I appreciate the time that those of you reading and responding to this request are offering. My quesiton is a theoretical and hopefully simple one, and yet I have been unable to find an answer to it on other searches or sources.
Here's the situation. I am working with SQL Server 2005 on a Windows Server 2003 machine. I have a series of databases, all of which are in Full recovery mode, using a backup device for the full database backups and a separate device for the log backups. The full backups are run every four days during non-business hours. The log backups are run every half hour.
Last week, one of my coworkers found that some rarely-used data was unavailable, and wanted to restore a database to a point in time where the data was available. He told me that point in time was some time back in November.
To accomplish this, I restored the database (in a separate database, as to not overwrite my production database) using the Point in Time Recovery option. I selected November from the "To a point in time" window (I should note that this window is always grey, never white like most active windows, it seems), and the full database backup and the subsequent logs all became available in the "Select the backup sets to restore" window.
I then tried a bevy of different options from the "Options" screen. However, every restore succeeds (ie: it doesn't error out), but seems to be bringing the database back to a current point in time. It's never actually going back to the point in time I specify.
My questions are as follows:
a) Is it possible to do a point in time recovery to a point in time BEFORE the last full database backup?
b) If so, what options would you recommend I use? (ie: "Overwrite the existing database", restore with recovery, etc etc).
I again appreciate any and all advice I receive, and I look forward to hearing from anyone and everyone on this topic. Thank you.
Ryan
View 4 Replies
View Related
Jan 7, 2007
Greetings everyone!Is there a way to stop query analyzer from processing remaining querystatements? Let's say i have the following query in query analyzer:query statementsif conditionbeginquery statementsstop the queryendquery statementsif conditionbeginquery statementsstop the queryendis there a way to stop the query from executing the statements in thesecond query when the first condition is met?i have searched BOL and google but i couldn't find anything. I hopeanybody out there can help me.BTW, i'm executing this statements directly in QA, not from within myprogram. The query statement and if condition pair is plenty. i guess ican use an else statement but it would be nested too deep. if there isa simpler way to do it please point me to the right direction or to anylink that'll get me going.Thanks in advance.diego
View 3 Replies
View Related
Jul 9, 2007
Hey guys and gals,
I'm having a real problem with this query at the moment...
Basically I have to produce a query which will tell me the total number of people employed by the company at any given date and the total salary for all these people.
We have a people table and a career table.
People(unique_identifier, known_as_and_surname, start_date, termination_date ...)
Career(unique_identifier, parent_identifier, career_date, basic_pay ...)
Relationship people.unique_identifier = career.parent_identifier
Employees can be identified like so
SELECT *
FROM people
WHERE start_date <= DateSelected
AND (termination_date > DateSelected
OR termination_date IS NULL)
Passing the selected date to the query is no trouble at all I am just having problems with the point in time side of this.
All and any help is greatly appreciated :)
~George
P.S. SQL Server 2000 ;)
View 14 Replies
View Related
Feb 12, 2004
I have the following query:
SELECT AVG(respondent_question.answer)
Now, the 'answer' column is an integer. However, I want the query to return a floating point number with one decimal place (i.e., 5.4, 2.3)
Since the column is an integer, the query returns only an integer by rounding to the nearest integer. How can I do this? Thanks!
View 1 Replies
View Related
Aug 5, 2014
CREATE TABLE SampleData (
CoID nvarchar(255),
Company varchar(255),
FirstName varchar(255),
LastName varchar(255),
JobLevel varchar(255))
[Code] ....
I am trying to make changes to the above query. This query will select 2 records per Company with top down priority on JobLevel. For example: This query will select 2 records from "123 Inc", where they have 2 Managers and 3 Staff contacts. The return results selects (2) managers and no staff records and FirstName and LastName are not duplicate. Then for "A Small Co.", they have 1 VP, 1 Director, 1 Manager and 3 Staff contacts. the return results chooses 1 VP and 1 Director and no managers or staff level people. And so on and so forth for the remainder of the companies.
What I was trying to accomplish is having this same query point to the database tables instead creating a table each and every time. I have this data residing in our database. I tried to make the change so it would point to the database tables but it kept giving me errors. This is way more complex than I thought.
My failed attempt:
Select *
From CampServ.dbo.SampleFakeCustomerData
//This is where I am getting stuck
WITH Priorities(Priority, JobLevel) AS(
SELECT 1, 'VP' UNION ALL
SELECT 2, 'Director' UNION ALL
[Code] ....
View 2 Replies
View Related
Jan 11, 2008
HI
I have a very simple query that simply does this: select * from badgetemplates where badgeid=39 , the badge template table has four fields, one of them is of type IMAGE, however the data on badge 39 IMAGE field only amounts to about 600kb, it used to run very quickly (a second or so) now it takes over a minute, i have checked this via the SQL profiler. What is strange is if I remove some of the data stored within the IMAGE field and reduce it to much smaller that 600kb it runs very quickly again. 600kb is fairly small and it used to return this very quickly as I say. Other queries are running at normal speed and the server perfomance does not seem to be reduced elsewhere, it only seems to have effected this only table but only with data over a certain size, the table itself only contains 20 or so rows. What could this be?!
Any help would be really appreciated as I have no clue.....
Dave
View 4 Replies
View Related
Oct 29, 2015
This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
[code]....
View 1 Replies
View Related
Oct 29, 2015
This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
DECLARE @stoptime DATETIME = NULL;
[Code] ....
View 8 Replies
View Related
Jun 21, 2006
Apparently the query analyser of sql server does not recognise adatabase with a point in it, likemail.archive.mdfI receive the following error when I use it:Server: Msg 911, Level 16, State 1, Line 1Could not locate entry in sysdatabases for database 'mail'. No entryfound with that name. Make sure that the name is entered correctly.Please help, thanksPrem
View 2 Replies
View Related
Nov 10, 2006
I'm running SQL Server 2005 on a Server 2003 machine serving both our home network as well as a remote site through a point-to-point T1. While file transfer speeds are up to par, the remote site's interaction with SQL Server (Point of sale system) is very slow. After testing I am certain that it has nothing to do with the actual physical machine in place neither is it an issue with the program itself since speeds are as they are supposed to be over the home network lan. It seems that there might be a packet size issue or something of the sort. Has anyone dealt with this before or have any thoughts?
Thanks,
Peter
View 7 Replies
View Related
Sep 20, 2013
I want to get the list of names starting with a particular letter.this letter should be passed as parameter in the query.
I have used the following query,
Select Cust_Code,Cust_Name,Cust_Add1 + Cust_Add2 as Address From Customer Where Cust_Code Like @Cust_Code Order By Cust_Name ASC
I am not sure whether the above query is correct.
View 4 Replies
View Related
May 26, 2007
Has any of you ever had problems with the ROUND command?
I have this operation:
ROUND((FIELD1 / 360 * FIELD5),3) AS FIELD7
(I want the result to be rounded at the third decimal).
SQL makes mistakes in rounding. It seems to me that
the problem relies in the quantity of decimals taken
into account in any single step of the operation.
Thank you in advance.
Anna - Verona (Italy)
View 5 Replies
View Related
Dec 25, 2006
Hi all,
I have this store procedure as follows:
Create Proc UpdateProblem@ProblemID int,@CompanyName varchar (50),@Firstname varchar (50),@Lastname Varchar (50),@Address varchar (50),@Postcode varchar (50),@City varchar (50),@Phone varchar (50),@Cutype varchar (50),@ProDescript varchar (50),@Sol varchar (50),@Email varchar (50)
as Update Problemset CompanyName = @CompanyName,Firstname = @Firstname,Lastname = @Lastname,Address = @Address,PostCode = @Postcode,City = @City,Phone = @Phone,Cutype = @Cutype,ProDescript = @ProDescript,Sol = @Sol,Email = @Email
where ProblemID = @ProblemID
when I test the querry
exec UpdateProblem10004, 'Toro AS','Mike','Tullas','Togo Street','G34 5TT','New York','06582531','Private','Machine is dead','Replace motherboard','goo@ht.com'
what happen is that when I ran the querry instead of updating the specifc row of 1004 the querry will just update the whole rows in the table with the same data.
Please help. I have set the ProblemID as the Primary key.
View 5 Replies
View Related
Apr 2, 2008
I often run queries in Query analyzer. Today I accidentaly deleted some data from a table. Is their a way to undo the last SQL command executed?I have heard of the rollback command, but I don't know if that is applicable or not?
View 6 Replies
View Related
Jun 7, 2012
how to get the quantity from output of sql query command for example, I could get the container name by below command
select container_name from sysibmadm.snapcontainer
get the container number by
select TBSP_NUM_CONTAINERS from SYSIBMADM.SNAPTBSP_PART
now I want to get the container number by below command output result select container_name from sysibmadm.snapcontainer..so what more command should I add on above command, I mean I want to get the container number by container name from the output of above command, not by 'join'.
View 1 Replies
View Related
Nov 8, 2007
Hi all,
I have a script to bulk copy data from my table into textfile. This bcp script will be executed by xp_cmdshell. When I try to execute the scipt inside query windows it returned an error : Error = [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified. But when I test the bcp script in command prompt it will execute successfully
Is there any misconfiguration ? (I'm using sqlexpress) thanks in advance.
Best regards,
Hery
View 9 Replies
View Related
Nov 9, 2007
sorry if when i had one table result like this ,
select changeprice,usetype from orderchange
changeprice usetype
-------------- ----------
450 a
650 b
650 c
how the sql query command i can use to be select result like this in one column line.
450a 650b 650c
best regard
View 1 Replies
View Related
Apr 16, 2007
Dear Friends,
I have an OLE DB Command inside an ETL. I want to execute a stored procedure that returns 2 fields, for example:
CREATE PROCEDURE sp_Name
AS
SELECT Field1, Field2 FROM Table
How can I continue the dataflow? How can I return the values from the query? Returns only a row...
View 10 Replies
View Related
Dec 3, 2007
Do you know of a way, in the OLE DB Command (Executing a sql command for each record), to specify a lock hint?
Example: in my component, I want to update a table but I want to specify a ROWLOCK or UPDLOCK hint.
When I try using this sql statement in the 'SqlCommand' property:
UPDATE DIM_Accounts WITH (UPDLOCK)
SET COL1 = ''
SSIS gives a syntax error.
Do you know any workarounds?
Thanks!
View 7 Replies
View Related
Sep 23, 2015
How do I execute below scripts using CMD:
Please Note: SQL server 2008r2, default instance with window Authentication.
1. Select * from Adventurewoks2008.Person.Person where Id = 5
2. Exec usp_getemployee (with parameter Manager_id = 100)
3. I have a folder named 'MyFolder' which contains 3 store procedures (usp_A, usp_B and usp_C).
How do I execute all 3 using CMD against AdventureWorks database.
View 9 Replies
View Related
Nov 18, 2015
How I can get the desired result using query. I don't want any
'@' variable in the result.
DECLARE @ST AS varchar(10)='AA'
DECLARE @desc AS int=8
DECLARE @STID AS int=4
DECLARE @PP AS int=63
DECLARE @SS AS int=22
/* Desired Result */
Update #RT Set ST='AA', desc=8, STID=4 Where PP=63 and SS=22
View 9 Replies
View Related
Jul 17, 2006
I have a dts that works from the command prompt, but hangs in Query Analyzer. Here's the code inside Query Analyzer:exec master..xp_cmdshell 'dtsrun /S BFHSQL4 /N vhl_dts_14144b /E'From the command prompt, it's just:dtsrun /S BFHSQL4 /N vhl_dts_14144b /EAny ideas what's wrong? Thanks for your help!
View 3 Replies
View Related
Jan 31, 2008
When my colleague makes any change to a query containing a derived table, the word 'WITH' followed by a lot of graphical characters appears after the alias, rendering the query unusable. We have tried this with various existing and new, simple queries, all to no avail. We are editing the queries in Visual Studio 2003, and he does not get this effect when using Visual Studio 2005. I can edit the query in 2003 on my laptop with no ill effects.
Help!
Karen
View 17 Replies
View Related
Aug 12, 2015
I would like to be able to view the complete SQL command that is sent from a Microsoft Access query which has linked SQL Server tables through ODBC, and the query also has some VBA functions manipulating and filtering data.I tried using the SQL Profiler to view the sql command send to SQL Server but all I see is the simple query format and some of the fields. I don't see the fields that have a VBA function such as trim(fieldname) etc in the column. And If I use a VBA fucntion in the Criteria then nothing shows up in SQL Profiled under the TextData column.How can I see the complete SQL command sent to SQL Server?
View 2 Replies
View Related
Feb 12, 2008
I need help understaning the first line of code in my sql query below. SELECT @PrimeRate = isnull(max(CredentialValue),0)
I don't have a clue as to what they are trying to do there. Can someone help me out?
SELECT @PrimeRate = isnull(max(CredentialValue),0)FROM Credential, CredentialType, #LocationsWHERE Credential.ResourceId = @PortalIdAND Credential.OfficeId = #Locations.OfficeIdAND Credential.CredentialTypeId = CredentialType.CredentialTypeId
View 1 Replies
View Related
Feb 23, 2007
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies
View Related
Nov 4, 2006
Hi All,
i am using a OLE DB Source in my dataflow component and want to select rows from the source based on the Name I enter during execution time. I have created two variables,
enterName - String packageLevel (will store the name I enter)
myVar - String packageLevel. (to store the query)
I am assigning this query to the myVar variable, "Select * from db.Users where (UsrName = " + @[User::enterName] + " )"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, enterName,. I select that and when I click on OK am getting this error.
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
myVar variable, i have set the ExecuteAsExpression Property to true too.
Please let me know where am going wrong?
Thanks in advance.
View 12 Replies
View Related
Aug 30, 2004
Do somebody know how long (in chars) script(command) can be solved by SQL Command?
Thanks
View 1 Replies
View Related
Sep 19, 2006
Hi. I am writing a program in C# to migrate data from a Foxpro database to an SQL Server 2005 Express database. The package is being created programmatically. I am creating a separate data flow for each Foxpro table. It seems to be doing it ok but I am getting the following error message at the package validation stage:
Description: An OLE DB Error has occured. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object".
.........
Description: "component "OLE DB Destination" (22)" failed validation and returned validation status "VS_ISBROKEN".
This is the first time I am writing such code and I there must be something I am not doing correct but can't seem to figure it out. Any help will be highly appreciated. My code is as below:
private bool BuildPackage()
{
// Create the package object
oPackage = new Package();
// Create connections for the Foxpro and SQL Server data
Connections oPkgConns = oPackage.Connections;
// Foxpro Connection
ConnectionManager oFoxConn = oPkgConns.Add("OLEDB");
oFoxConn.ConnectionString = sSourceConnString; // Created elsewhere
oFoxConn.Name = "SourceConnectionOLEDB";
oFoxConn.Description = "OLEDB Connection For Foxpro Database";
// SQL Server Connection
ConnectionManager oSQLConn = oPkgConns.Add("OLEDB");
oSQLConn.ConnectionString = sTargetConnString; // Created elsewhere
oSQLConn.Name = "DestinationConnectionOLEDB";
oSQLConn.Description = "OLEDB Connection For SQL Server Database";
// Add Prepare SQL Task
Executable exSQLTask = oPackage.Executables.Add("STOCK:SQLTask");
TaskHost thSQLTask = exSQLTask as TaskHost;
thSQLTask.Properties["Connection"].SetValue(thSQLTask, "oSQLConn");
thSQLTask.Properties["DelayValidation"].SetValue(thSQLTask, true);
thSQLTask.Properties["ResultSetType"].SetValue(thSQLTask, ResultSetType.ResultSetType_None);
thSQLTask.Properties["SqlStatementSource"].SetValue(thSQLTask, @"C:LPFMigrateLPF_Script.sql");
thSQLTask.Properties["SqlStatementSourceType"].SetValue(thSQLTask, SqlStatementSourceType.FileConnection);
thSQLTask.FailPackageOnFailure = true;
// Add Data Flow Tasks. Create a separate task for each table.
// Get a list of tables from the source folder
arFiles = Directory.GetFileSystemEntries(sLPFDataFolder, "*.DBF");
for (iCount = 0; iCount <= arFiles.GetUpperBound(0); iCount++)
{
// Get the name of the file from the array
sDataFile = Path.GetFileName(arFiles[iCount].ToString());
sDataFile = sDataFile.Substring(0, sDataFile.Length - 4);
oDataFlow = ((TaskHost)oPackage.Executables.Add("DTS.Pipeline.1")).InnerObject as MainPipe;
oDataFlow.AutoGenerateIDForNewObjects = true;
// Create the source component
IDTSComponentMetaData90 oSource = oDataFlow.ComponentMetaDataCollection.New();
oSource.Name = (sDataFile + "Src");
oSource.ComponentClassID = "DTSAdapter.OLEDBSource.1";
// Get the design time instance of the component and initialize the component
CManagedComponentWrapper srcDesignTime = oSource.Instantiate();
srcDesignTime.ProvideComponentProperties();
// Add the connection manager
if (oSource.RuntimeConnectionCollection.Count > 0)
{
oSource.RuntimeConnectionCollection[0].ConnectionManagerID = oFoxConn.ID;
oSource.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oFoxConn);
}
// Set Custom Properties
srcDesignTime.SetComponentProperty("AccessMode", 0);
srcDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", true);
srcDesignTime.SetComponentProperty("OpenRowset", sDataFile);
// Re-initialize metadata
srcDesignTime.AcquireConnections(null);
srcDesignTime.ReinitializeMetaData();
srcDesignTime.ReleaseConnections();
// Create Destination component
IDTSComponentMetaData90 oDestination = oDataFlow.ComponentMetaDataCollection.New();
oDestination.Name = (sDataFile + "Dest");
oDestination.ComponentClassID = "DTSAdapter.OLEDBDestination.1";
// Get the design time instance of the component and initialize the component
CManagedComponentWrapper destDesignTime = oDestination.Instantiate();
destDesignTime.ProvideComponentProperties();
// Add the connection manager
if (oDestination.RuntimeConnectionCollection.Count > 0)
{
oDestination.RuntimeConnectionCollection[0].ConnectionManagerID = oSQLConn.ID;
oDestination.RuntimeConnectionCollection[0].ConnectionManager = DtsConvert.ToConnectionManager90(oSQLConn);
}
// Set custom properties
destDesignTime.SetComponentProperty("AccessMode", 2);
destDesignTime.SetComponentProperty("AlwaysUseDefaultCodePage", false);
destDesignTime.SetComponentProperty("OpenRowset", "[dbo].[" + sDataFile + "]");
// Create the path to link the source and destination components of the dataflow
IDTSPath90 dfPath = oDataFlow.PathCollection.New();
dfPath.AttachPathAndPropagateNotifications(oSource.OutputCollection[0], oDestination.InputCollection[0]);
// Iterate through the inputs of the component.
foreach (IDTSInput90 input in oDestination.InputCollection)
{
// Get the virtual input column collection
IDTSVirtualInput90 vInput = input.GetVirtualInput();
// Iterate through the column collection
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
// Call the SetUsageType method of the design time instance of the component.
destDesignTime.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READWRITE);
}
//Map external metadata to the inputcolumn
foreach (IDTSInputColumn90 inputColumn in input.InputColumnCollection)
{
IDTSExternalMetadataColumn90 externalColumn = input.ExternalMetadataColumnCollection.New();
externalColumn.Name = inputColumn.Name;
externalColumn.Precision = inputColumn.Precision;
externalColumn.Length = inputColumn.Length;
externalColumn.DataType = inputColumn.DataType;
externalColumn.Scale = inputColumn.Scale;
// Map the external column to the input column.
inputColumn.ExternalMetadataColumnID = externalColumn.ID;
}
}
}
// Add precedence constraints to the package executables
PrecedenceConstraint pcTasks = oPackage.PrecedenceConstraints.Add((Executable)thSQLTask, oPackage.Executables[0]);
pcTasks.Value = DTSExecResult.Success;
for (iCount = 1; iCount <= (oPackage.Executables.Count - 1); iCount++)
{
pcTasks = oPackage.PrecedenceConstraints.Add(oPackage.Executables[iCount - 1], oPackage.Executables[iCount]);
pcTasks.Value = DTSExecResult.Success;
}
// Validate the package
DTSExecResult eResult = oPackage.Validate(oPkgConns, null, null, null);
// Check if the package was successfully executed
if (eResult.Equals(DTSExecResult.Canceled) || eResult.Equals(DTSExecResult.Failure))
{
string sErrorMessage = "";
foreach (DtsError pkgError in oPackage.Errors)
{
sErrorMessage = sErrorMessage + "Description: " + pkgError.Description + "";
sErrorMessage = sErrorMessage + "HelpContext: " + pkgError.HelpContext + "";
sErrorMessage = sErrorMessage + "HelpFile: " + pkgError.HelpFile + "";
sErrorMessage = sErrorMessage + "IDOfInterfaceWithError: " + pkgError.IDOfInterfaceWithError + "";
sErrorMessage = sErrorMessage + "Source: " + pkgError.Source + "";
sErrorMessage = sErrorMessage + "Subcomponent: " + pkgError.SubComponent + "";
sErrorMessage = sErrorMessage + "Timestamp: " + pkgError.TimeStamp + "";
sErrorMessage = sErrorMessage + "ErrorCode: " + pkgError.ErrorCode;
}
MessageBox.Show("The DTS package was not built successfully because of the following error(s):" + sErrorMessage, "Package Builder", MessageBoxButtons.OK, MessageBoxIcon.Information);
return false;
}
// return a successful result
return true;
}
View 2 Replies
View Related
Mar 11, 2002
Hi All,
I'd like to remotly stop an instance of SQL Server
but this command does not seem to work....
net stop mssql$<server name> (eg. net stop mssql$prod)
...any ideas? I'll want to start this sql server again too.
David.
View 1 Replies
View Related
