Hi there,
I need to recover certain transactions that I made on the server.
Those transactions were in scripts and I lost the files.
Is there a way to read the transaction log so that I can see what transactions were executed?
TIA
Hi,
I am looking for a way to read a transaction log in an Excel format, does anyone know how I can do this? I have already looked at the dbcc log(mydb), and its not documented, doesnt give enough info. I am more looking for an open source/free tool or a way to do it in SQL Server.
Thanks much.
Hi,
I need to access and read the transaction log and run an update according to the log....is it possible through sqldmo....is there any other methods through which i can do the same
Hi,
I wanted to read the transaction log...is there a way??? I want to know the command executed from the transaction logs.
DBCC TRACEON (3604)
select * from ::fn_dblog(1,null)
DBCC LOG (test,-1)
Anything else apart from these??
Regards,
Asha
Hello,
I have following situation:
1st thread: start transaction, update some values in table (with (rowlock))
2nd thread: starts select for this record.
I have tried some possibilities with SET TRANSACTION ISOLATION LEVEL but noone is suitable for me. I would like during such running transaction to have possibility to read but the OLD values (last commited).
Am I able to reach this behaviour with some setting of locks, transaction level?
How can I read the content of transaction log?
View 2 Replies View RelatedI still have transactions in use mainly to set isolation levels. There are obviously no update/delete statements in them. I'm pretty sure this will still add rows to the transaction log even though there won't be any writes to the db data files. Is it still a critical best practice to use RAID 1/0 instead of RAID 5 for the logs? Looking to re-use some existing storage rather than buy new ones. Thoughts?
View 1 Replies View RelatedDoes anyone know of a utility to read SQL 7 Transaction Log Backups and present them in a meaningful format?
View 2 Replies View RelatedHi!
The purpose is to se history of which user updated, inserted or deleted a row in the database.
Can't seem to find any publications from microsoft on how to parse and interpret the log file.
Any documentation on how the log file is structured?
Is it possible to obtain this information through the system views
I don't want to use triggers.
Thanks
our users believe that we lost some valid data, but no one knows who did it,
I thought I can find it from the transaction dumps I take every hour
so ,Can I read Transaction Dumps (*.TRN) file in SQL server 7.0 or Can I get this information through other means.
Thanks for your help
DP
We have poor performance spikes on a drive containing our log file but this is only for reads and seems to be at a time when we run a re-index job. If this is a likely correlation as to poor performance in reading the log file, and what reads are done from a log file.
View 2 Replies View Related
Hello,
how can i view the content of a archived (backed up) transaction log?
DBCC LOG only works with online logs.
Thx for your answer
Best regards,
Stefan Ridinger
I actually am just looking for some supporting documentation on some facets of SQL Server.As far as I have always known, when anyone does a READ from a SQL Server database (SELCT * from <TABLE>), SQL Server does not create a log record...since there's no data or database structure being modified. A colleague is under the impression READ's are logged operations.
View 5 Replies View RelatedHello, everyone:
I have a local transaction,
BEGIN TRAN
INSERT Z_Test SELECT STATE_CODE FROM View_STATE_CODE
COMMIT
View_STATE_CODE points to remote SQL server named PROD. There is error when I run this query:
Server: Msg 8501, Level 16, State 1, Line 12
MSDTC on server 'PROD' is unavailable.
Server: Msg 7391, Level 16, State 1, Line 12
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d01c].
It looks like remote server is not available inside the local transaction. How to handle that?
Thanks
ZYT
I had a databases running on SQL Server (EVALUATION VERSION).I moved it to another system running:-Windows 2000 Server-IIS 5.0-BlueDragon Server-MSDEI applied all of the latest service packs, security updates, etc...Intalled SQL Server Web Data Administrator and .NET framework.I attached the database using sp_attach_db:[color=blue]>osql –U sa>password>Sp_attach_db ‘whatever',>@filename1 = ‘C:Program FilesMicrosoft SQL[/color]ServerMSSQLDataCollaborationTools.mdf',[color=blue]>@filename2 = ‘C:Program FilesMicrosoft SQL[/color]ServerMSSQLDataCollaborationTools.ldf'[color=blue]>go[/color]I added my datasource using the ODBC Admin Tool...Verified it using the BlueDragon Admin Datasources page....But now I'm getting the error message:'Could not run BEGIN TRANSACTION in database 'whatever' because thedatabase is read-only.'Any help/guidance would be appreciated.Thanks very much.Shaun
View 3 Replies View RelatedHi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
i attached adventure works in sql server 2008 and it showing as read only ,make it read write or remove read only tag from database.
View 11 Replies View RelatedI am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
How to identify whether the files are in read write or read only?
View 1 Replies View RelatedI'm trying to do Sharepoint DR with Log Shipping and every thing configured except one thing which is switch the WSS_Content (Standby /Read-Only) DB to be ready and Write.Â
I tried from
GUI or ALTER DATABASEÂ [WSS_Content]Â SET
READ_WRITEÂ WITHÂ NO_WAIT
but I received the below error:Â
Database WSS_Content is in Warm StandbyÂ
I have two database files, one .mdf and one .ndf. The creator of these files has marked them readonly. I want to "attach" these files to a new database, but cannot do so because they are read-only. I get this message:
Server: Msg 3415, Level 16, State 2, Line 1
Database 'TestSprintLD2' is read-only or has read-only files and must be made writable before it can be upgraded.
What command(s) are needed to make these files read_write?
thanks
OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.
i have a database which get refreshed every day from client's data . and we need to pull heavy data from them every day as reports . so only selects happens on that database.
we do daily population of some table in some other databases from this daily refreshed DB.
will read uncommitted or NOLOCK with select queries to retrieve data faster.
there will be no dirty read as there are NO DML operation in that database so for SELECT which happens concurrently on these tables , will NOLOCK work?
Can a user of db owner role of a database change the databse option to read only and read-write?If not what permission I need to grant to the user?
View 1 Replies View RelatedIs it possible to set READ UNCOMMITTED to a user connecting to an SQL2000 server instance? I understand this can be done via a front endapplication. But what I am looking to do is to assign this to aspecific user when they login to the server via any entry application.Can this be set with a trigger?
View 1 Replies View RelatedOK, I'm using VS2003 and I'm having trouble. The page works perfectly when I created it with WebMatrix but I want to learn more about creating code behind pages and this page doesn't work. I think it has some things to do with Query builder but I can't seem to get change outside "please register". I have the table populated and it is not coming back with "login successful" or "password wrong" when I've entered correct information. Enclosed is what I've done in VS2003. Can you see where my error is? Any help would be greatly appreciated.
Thanks again.
Imports System.data.sqlclient
Imports System.Data
Public Class login2
Inherits System.Web.UI.Page
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.SqlCommand1 = New System.Data.SqlClient.SqlCommand
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "server=LAWORKSTATION;user id=sa;database=test;password=t3st"
'
'SqlCommand1
'
Me.SqlCommand1.CommandText = "SELECT pass FROM Customer WHERE (email = 'txtusername.text')"
Me.SqlCommand1.Connection = Me.SqlConnection1
End Sub
Protected WithEvents lblUsername As System.Web.UI.WebControls.Label
Protected WithEvents lblPassword As System.Web.UI.WebControls.Label
Protected WithEvents txtUsername As System.Web.UI.WebControls.TextBox
Protected WithEvents txtPassword As System.Web.UI.WebControls.TextBox
Protected WithEvents btnSubmit As System.Web.UI.WebControls.Button
Protected WithEvents lblMessage As System.Web.UI.WebControls.Label
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents SqlCommand1 As System.Data.SqlClient.SqlCommand
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
End Sub
Private Sub btnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
SqlConnection1.Open()
Dim dr As SqlDataReader = SqlCommand1.ExecuteReader
If dr.Read() Then
If dr("password").ToString = txtPassword.Text Then
lblMessage.Text = "login successful"
Else
lblMessage.Text = "Wrong password"
End If
Else
lblMessage.Text = "Please register"
End If
dr.Close()
SqlConnection1.Close()
End Sub
End Class
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View Related
I want to list out the pending transaction for transaction replication by publication.
Help needed.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]