I know that several hotfixes need you to turn on trace flag 4199 to activate them. But after reading an article on that trace flag, and the way it was worded, I couldn't tell if you still needed to use the trace flag, once that hotfix was incorporated into a service pack.
View 1 RepliesUsing SQL Server 2000 std. edition, I was bitten by the bug described in KBs 818671 and 289149. Query optimizer using Hash Match Team operators would sometimes fail. I added -T8679 at SQL Server startup.
Now that I'm upgrading to SQL Server 2005, is this trace flag still required?
I see that "this was fixed in SQL 2000, SP1." However, I would like a more precise confirmation that this flag is no longer needed in SQL 2005. Sometimes, no news is not necessarily good news.
The error is intermittent, and at least partially dependent on data conditions not available to me for exhaustive regression testing (or else of course I would do that).
Any info, comments, etc. ... would be welcome.
Thanks ...
Tracy Slack
Hi,
I'm trying to use trace flag 1204 to get some detailed deadlock information
In EM, I add startup parameter -T1204, and then I stop and start the server.
I run two jobs that I have setup to deadlock, and they do. But no information about the deadlock is in my sql error log? anyone know what I am doing wrong? thanks.
In order to use Microsoft Dynamics NAV with the SQL Server 2005, I need to set Trace Flag 4616, and I know it's a setting somwhere, where I can add this flag no. -but I can't remember where? Please help?
View 1 Replies View Related
Hi,
Do i need to restart SQL Database Engine Service once I set trace flag (-T1222).
Regards
Sufian
Hi all
i am using Sql Server 2005 SP2, I am trying to configure Mirroring. The issue is ,After configuring mirroring ,Whem i am starting START MIRRORING button .I am getting the error
Database mirroring is disabled by default. Database mirroring is currently provided for evaluation purposes only and is not to be used in production environments. To enable database mirroring for evaluation purposes, use trace flag 1400 during startup. For more information about trace flags and startup options, see SQL Server Books Online. (Microsoft SQL Server, Error: 1498)
I used BDCC TRACEON (1400) and I altered the Startup parameter in configuration manager of SQL SERVER ;-T1400
But still I am getting the above error which is indicated in red
Please help me to fix the issue
I found trace flag 9520 is in the startup parameters, but I cannot find what the trace flag does from internet.
View 6 Replies View RelatedIs there a dbcc flag that will capture all error messages in the log
e.g. when inserting data into a table, a PK violation occurs throwing, Msg 2627
..similar to trace flag 1222 to capture deadlock info..
After carefully analyzing the situation for almost a month, I pulled the trigger and made an exception at work; we did enable trace flag 2371. We have some tables with billion of rows and outdated statistics causing horrible plans. Tried several methods to update those, but did not solve the problem or was too CPU intensive, causing other issues.
Anyway, one of the side effects I am seeing so far is average vCPU went down by almost 40%. Nothing out of usual (besides the flag) has been enabled or was executed. So my assumption is, CPU hungry plans are now gone or reduced.
I am upgrading my application's SQL Server from 2008 R2 to 2012.
As discussed in the below URL I am able to see the Identity jump after I upgrade and the server is restarted.
Now since I cannot afford this and at this moment I do not have the time to create a sequence with NOCACHE and test it again I have to go ahead and add trace flag 272 in the start up parameter as this is the only solution which I can implement and even rollback without much hassles.
[URL] ....
What I got to know, this flag will disable the new feature of IDENTITY property that has been implemented as part of SQL Server 2012 and will make it work like it was doing in SQL Server 2008 R2.
But I want to know implementing this flag would impact any other feature or performance (except the performance of IDENTITY) of SQL Server.
Here's my predicament. I changed the filter on an article within a subscription, but not in a meaningful way. I just added "database.dbo." before a column name, but now my subscription is flagged for reinitialization, and won't replicate any transactions unless I start over with a new snapshot. I don't want that to happen. How can I reset the article properties somewhere to get it back the way it was and continue replicating transactions.
(I needed to add "database.dbo" so that another job that looks at the filter info would point to the correct database. Next time maybe I'll just modify the table that stores the filter info)
The reason I don't want to snapshot from the beginning is that I have procedures on the subscribing server that fire triggers from the transactions, so all the jobs "downstream" would get all out of sync.
HELP !
Hello,
Just want to know if anybody else has problems with the hotfix ?
I have a sqlserver 2005 on my desktop.
I installed the sp2 before 5th march.
Recently Microsoft changed the sp2 and released a hotfix for sp2 installed(downloaded) before 5th march.
I installed the hotfix but it failed to update the sqlserver engine.
Very weird.
I uninstalled sqlserver 2005, applied the new sp2 (which was smaller compared with previous one)
Today i still received a critical update in windows update.
I installed it, but i still don't trust these updates.
How can i investigate all went well ?
hi all!
i have columns.
1. Flag : stores only + / - / <NULL>
2. Number : stores float
how would i select this 2 columns to generate -ve and +ve number depend on the flag? eg :
Flag : -
Number : 4 ====> -4 and +4 if flag=+
when i try to just to combine with -(Flag) for -ve, it gave converting type error even i already CAST it..
tq in advance
~~~Focus on problem, not solution ¯(º_o)/¯ ~~~
Can anyone help me to get the hotfix SQL Server 2000 build 8.00.2215 ?
As i do not find any download link.
We would like to apply a hotfix to solve the issue that brought our server down. The hotfix we are trying to apply is in Build 3175. But the latest Cumulative Update 3 Package is Build 3186. Should we apply 3175? Or we can go for the latest build 3186? Which is recommended?
View 6 Replies View RelatedHi,
Is there anyone know where to get the hotfix to put the "Select All" option back on multi-value parameter list after SP1?
The reason why I didn't install SP2 because it requires to install print control on client side. At the moment our company try to avoid it.
Or is there a way to avoid this print control?
I hope to see some responses from MSFT support team.
Cheers,
XL
I have SP1 on most of my servers. My users however do not. They have been developing using "select all" and are now ready to deploy a major project, I am in the process of installing the hotfix so my question is "they do not have SP1 and I have SP1 along with the hotfix" will that work or does this hot fix require that the client tools have SP1 and the hotfix applied as well"? They do not want to change their development environment since they are so close to deployment of their reports. Thank you!!
View 1 Replies View RelatedHi Guys,
Iam at the completion of my project and iam facing a crash from the sql server 2005 .....Microsoft have agreed it to be their bug in the following article
http://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=124525
I have searched for any fix in the site but unable to find that..........So please give me the fix Iam in emergency and also client is on my neck....Please help me out
Thanks in advance,
Phani
Right now my SQL Server 2005 is on build 3054.I am trying to apply patch SQLServer2005-KB934459-x86-ENU.I am getting error like failed to apply hotfix.
Can you please tell me the exact steps so I can troubleshoot and I can upgrade sql server to build 3159.
Guys,
I have following scenario where I need to populate version flag based on the partyid, count and seq columns.
Here is it how it should populate for each new count of a partyid the max(seq) should be versioned as 1
For example
PARTYCOUNT SEQ VERSION
_________________________________________________
10011 1
10111 0
10112 1
10121 0
10122 0
10123 1
10231 1
Is there any way to populate this version flag.
Any sugggestions and inputs would help
Thanks
I have a perl script (uses sql query) that will run if there is anyupdate in the row. Currently, I am a trigger that sets the DateModifiedfield with getdate() Then my perl script looks for certain range ofmodified dates and runs the necessary query.I am trying to come up with a different mechanism where I don't have touse the date field. I am looking into flag bits. But not sure howto use it.Should I create a trigger that will set the flag bit after any update?This way the script will just look for the updated records, regardlessof what time it was updated. Maybe I am misunderstanding flag bits, thenafter another subsequent update how would the perl/sql script know whichrecords were updated? I hope this make sense.thanks.--s
View 3 Replies View Related
Hi there,
I'm working on a program and I want it to check to see if the database it is pointed to has had a backup done against the database in the last 10 days. I will then throw a message box indicating that the database has not been backed up and that they should consider doing so.
Is there any attibute that I can check to see when the last time the database was backed up?
THanks for your input! - Eric -
I am trying to build a decision tree algorithm with multiple regressors. I am having trouble changing the properties for the input variables to regressors (the only multiple flag choice is "not null"). I created a mining model using the DMX query thinking I could change the code to include multiple regressors, however I get a syntax error when trying to execute the model. Also, I am wondering if you can view the dmx code for a model built using the mining wizard.
My query is as follows:
CREATE MINING MODEL BVRSlotq1052
(Machine Long Key,
[Banksize] LONG CONTINUOUS REGRESSOR ,
[Cabinet] Text Discrete,
[CUID] Long Continuous PREDICT_ONLY,
[Denom] Text Discrete,
[Gametype] Text Discrete,
[Max Coins] Text Discrete,
[Par] Long Continuous,
[Pos] Text Discrete,
[Progressive] Text Discrete,
[Type]Text Discrete)
Using Microsoft_Decision_Trees
If you have a table with columns like Category int, Cost money, EffectiveDate DateTime, SpecialFlag (char Y or N) how would you write a query to get for each category, get the most recent, with a specialFlag of Y if a Y record exists and if not, grab the N record?
I have tried using the exists clause for the flag, but as soon as I mix in the group by to get the latest effectivedate, the max is evaluated first and I am not guaranteed to use the Y records if they exist.
To illustrate:
A 1, $10, 1/1/2007 Y
B 1, $12, 1/1/2007 N
C 2, $5, 6/7/2007 N
D 2, $4, 1/1/2007 N
E 3, $1, 1/1/2007 Y
F 3, $2, 6/7/2007 Y
G 3, $3, 2/1/2008 N
I want records A because it is flagged Y, C because it is the most recent and there is no Y record and F because it is flagged and most recent.
I have two clustered server. (ms sql 2000 server, windows 2003 server) now i need to add one new server to the cluster and take the secondary node off.
I have installed SP4 & hotfix in my SQL Server cluster before.
My question is do I still need to install SP4 & hotfix in my new server?
Thanks in advance
I'm running sql server 2005 servicepack 2 build 3042 (32bit)
has anyone had any problems with this hotfix????
http://support.microsoft.com/kb/934459
I am trying to install sql2005-kb918222-x86-enu.exe, first one in the x86 family. I am getting "This machine does not have a product that matches this installation package".
I have SP1 is installed. Version and patch level are 9.1.2047. on
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1Setup
Any help is appreciated
I am getting the following (MOM) error on 3 of my databases anytime I initiate a backup of the mdf. The database seems to backup as expected. The one thing that has recently changed is I implemented MS Hotfix 2187 on my SQl cluster over the weekend.
Severity: Critical Error
Status: New
Source: MSSQLSERVER
Name: Commit record has already been distributed. Check DBTABLE
Description: Unable to expand message 17055 [-1073724769] 18264 Database backed up: Database: XX03PLUS, creation date(time): 2005/12/06(18:38:50), pages dumped: 23026, first LSN: 18761:44:1, last LSN: 18761:46:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'G: empar03PLUS_fromVCforK1.bak'}).
thanks in advance,
Jerry
I am using this select statement to radomly display a recordSelectCommand="SELECT TOP 1 * FROM [TBL_Example] ORDER BY NEWID()I need to, however, flag this record, to determine if it has already been previously randomly selected, and won't take part in future random selections.I will need to add a where clause to the above, but what I am unsure of is what I should do for the insert statement. I guess I could figure this out on my own as well if I could determine a means to prgramatically store my PK from the above record in session.Any ideas?
View 1 Replies View RelatedI have a table where when an employee works LEAVE1 and LEAVE2 paycodes on the same day then in the new column called 'FLAG' we need to put a 1 for LEAVE1 and a 2 for LEAVE2, when these paycodes are not there on the same day then flag will be NULL as for other paycodes.
Tried using the CASE statements but it always puts a 1 or 2 for the respective paycodes regardless of the fact whether they were together on the same day or not.
WITH SampleData (PERSON,TRANSACTDATE, STARTDATE, END_DATE, IN_PUNCH,OUT_PUNCH,HOURS, PAYCODE) AS
(
SELECT 1234,'08/03/2015','08/03/2015','08/03/2015', '06:00','09:00','3', 'REG1' UNION ALL
SELECT 1234,'08/03/2015','08/03/2015','08/03/2015', '09:00','13:00','4','REG2' UNION ALL
SELECT 1234,'08/04/2015','08/04/2015','08/04/2015', '09:00','13:00','4','LEAVE1' UNION ALL
SELECT 1234,'08/04/2015','08/04/2015','08/04/2015', '14:00','16:00','2', 'LEAVE2'UNION ALL
SELECT 1234,'08/05/2015','08/05/2015','08/05/2015', '08:00','09:00','1', 'LEAVE1'UNION ALL
SELECT 4553,'08/05/2015','08/05/2015','08/05/2015', '08:00','09:00','1', 'REG1'UNION ALL
SELECT 4553,'08/05/2015','08/05/2015','08/05/2015', '10:00','12:00','2','LEAVE2'
)
[code].....
Current Results
PersonTransactDate STARTDATEEND_DATEIN_PUNCH OUT_PUNCH HOURS PAYCODE
123408/03/2015 08/03/201508/03/201506:00 13:00 3 REG1
123408/03/2015 08/03/201508/03/201506:00 13:00 4 REG2
123408/04/2015 08/04/201508/04/201509:00 16:00 4 LEAVE1
123408/04/2015 08/04/201508/04/201509:00 16:00 2 LEAVE2
123408/05/2015 08/05/201508/05/201508:00 09:00 1 LEAVE1
455308/05/2015 08/05/201508/05/201508:00 12:00 2 LEAVE2
455308/05/2015 08/05/201508/05/201508:00 12:00 1 REG1
Desired Results
PersonTransactDate STARTDATEEND_DATEIN_PUNCH OUT_PUNCH HOURS PAYCODE FLAG
123408/03/2015 08/03/201508/03/201506:00 13:00 3 REG1 NULL
123408/03/2015 08/03/201508/03/201506:00 13:00 4 REG2 NULL
123408/04/2015 08/04/201508/04/201509:00 16:00 4 LEAVE1 1
123408/04/2015 08/04/201508/04/201509:00 16:00 2 LEAVE2 2
123408/05/2015 08/05/201508/05/201508:00 09:00 1 LEAVE1 NULL
455308/05/2015 08/05/201508/05/201508:00 12:00 2 LEAVE2 NULL
455308/05/2015 08/05/201508/05/201508:00 12:00 1 REG1 NULL
i want to make a stored procedure that will update the notification flag in the table.
If the email was succesfully sent the flag will be updated as SENT. And if it is un successful the flag will be NOT SENT in column of the table in SQL. The email will be send using .NET codes and updates of notification flag will use SQL stored procedure. Please help
Table Example:
ID NAME FLAG
1 Bill null
2 Bill null
3 Bill null
4 Bob null
5 Henry null
6 Henry null
I want to keep the flag empty for one record and mark the rest as duplicates so the output would be:
ID NAME FLAG
1 Bill null
2 Bill D
3 Bill D
4 Bob null
5 Henry null
6 Henry D
How can I go about doing this?
i have an hours and a seperate minutes column
e.g.
Hour
10
Minute
15
I now need to flag the last two hours of the day in a new column both datatypes are INT