I'm having an issue where I print a reporting services report through a browser be it IE or Firefox and the report page is being split into two pages for a single page. A report that is 3 pages ends up being six pages when printed. Does anyone know of a fix or workaround for this problem.
Thanks
I am having an issue with report printing. I have used a specific font (Garamond) for all the report elements when creating the report in Bus Int. Dev. Studio. While printing from the preview pane, the report prints with the Garamond font (as intended).
But the issue is that after deployment, printing the report (with browser print control) does not print it with the Garamond font (looks like it is using the Arial or a similar font). This changes the whole look and feel of the report. I have tried printing the report from the reportserver, report manager and through URL access. All the 3 methods are giving similar results that the print output is not using the on-screen font.
Anybody else face similar issues? Is there any workaround for this? TIA.
Hello,
I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
I just installed SQL 2005 Express, and I do not see the SQL browser and the Administration tool anywhere in my computer. Does anyone know what I need to do?
i need to get the browser Time in client side
Regards,
Prabu R
Most of the times I cant see my database tables from the query analyser in the object browser window... There are some times that appear normally...but in mosto of cases they just dont appear at all...I can only see the master database and msdb... I am connecting giving the proper password...
bear in mind that I can write and execute queries to my database although I cant see the tables
Why could this be happened??? Is a matter that i have discussed with my hosting provider or I am missing something here???
Hi!I'm trying to build an app. for my parents' office. They have a smalloffice (5 PCs), and they currently work with a very old program that'sbased on DOS. The program doesn't work well under XP, so they still useWin 98. They had their network upgraded about a year ago. They hadMicrosoft SBS 2000 installed, it includes SQL Server. I've written afew DB's in Access before, and now I'm just learning how to use SQL.Before I start work on their app., I have a question:I know it's possible to create an interface that can be put on theirnetwork and accessed via a browser. How is this done exactly?It would be very beneficial for me, because it would mean that the newapp. would be platform independent, so that they can upgrade to XPeasily. It would also save us the cost of licensing front-end software(e.g. Access) for each machine.Any comments would be appreciated.Noam Nelke, Israel.
View 2 Replies View RelatedGreetings,
I have noticed a change in how the new version Internet Explorer renders.
I have a couple of simple matrix reports with textbox buttons that use a drill through to the same report with the reportdate parameter being incremented or decremented by one day.
The report cells calc font and color based on data, nothing to elaborate. In IE 6 the report was displayed quickly. When I upgraded to IE 7 the same report's performance has degraded greatly. In IE 7 the data is returned in the same time frame as before and the report is rendered quickly then my CPU pegs out to 95% for about 5 seconds making it seem as though the browser has locked up. It doesn€™t matter if I have 5 rows or 500 rows.
This is happening to all my reports with jump to report functionality but only if the report to jump too is the same report with different parameters.
Anyone else having a similar problem?
Hello there,
We have a Windows Server 2003 where SQL Server 2005 is installed. The problem is that SQL Server browser cannot be started. When I try to connect to any instance of SQL Server, the connection fails. I have to try to start SQL Server browser and try to connect again to the particular instance of SQL Server after each attempt to start the browser. I succeed after several such attempts to connect, but SQL Server browser will still not start.
Can anyone tell me what can be wrong with SQL Server browser?
Thanks in advance
Hemant
I think it whould be simpler to explain what I am trying to accomplish.
I wish to pull a query to return multiple records from a SQL 7.0 database.
The query is a customers standing order.
I wish to make edits to multiple records then return those records for update.
The HTML pages that I have seen all seem to display tables on a singular record format.
Is it possible to display records in a 'Table' format and allow it to be updated.
Can any one answer this or direct me to a site with the relevent info.
Thanks Stuart
Indtec@eircom.net
Hey,
Does SQL Server have a session browser similar to Oracle and if so, how can I use it? I am looking to retrieve the SQL being ran when users are running particular reports from a gui tool.
Thanks
Hi,
I have created a sample report called Report1 in SSRS 2005. This currently is running locally on my workstation.
I can even browse to it using the http address i.e. http://localhost/Reports
The question is: How can someone else access this report on my machine. They can not browse to my machine by typing http://12.32.2.344/Reports
Do I need to do any configuration in my local IIS?
Thanks
hi!
As a newbie quite confused..
Created mesures in my cube which are not working. When I run MDX select-commands in Management studio they do not show any measure calculations(Total sum), just NULL, but the headers are there, as the Month.
The same in Browser: Headers showing but not Measure calculations. They are empthy. How could I solve this?
We have a 6 node cluster with 4 SQL Server named instances in the cluster. I am noticing a lot of warnings in the event log with the following information:
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance
<instance name> is not valid.
The event occurs for all four instances.
Additional Information:
* OS is Windows 2003 R2 Enterprise x64 Edition w/SP2
* SQL Server 2005 Enterprise Edition w/SP1, hot fix level 2221
* All SQL services runs under the same domain user account
I did some internet searches and found several others who have had this problem. However, I didn't see any solutions. There also seems to be a similar problem with SQL Express but that is not what I am using.
Any thoughts are appreciated.
I am using SQL Server 2005 developer edition and Visual Studio 2005. I am working on local computer and when I define a cube I am using data sources to which I can connect without any problem using "Test connection". However, when I want to perform calculation or browse a cube I get a message of either I am as a user do not have permission to access source database (in reality I do have this permission) or source database does not exist (in reality it exists). I check the SQL Server Browse Service and it is not running and the option of starting it is disabled (Start mode is undefined and only properties option can be used). I already have enabled the TCP/IP and Named Pipes protocols but I still cannot browse cube data.
Any help SUPER welcome.
Elka
I am using sql express w/ advanced services on xp pro with IIS 5.1 installed. On the local machine named 'Tester' i am able to access reportserver using a web browser and the url: http://localhost/reportserver. But when i go to another machine on the same network and domain and try to access the reportserver with url: http://Tester.domain/reportserver or http://<ip address of Tester>/reportserver ie tells me page cannot be found and does not give me any errors. How do I set up network access to reportserver on the machine Tester? Help would be greaty appreciated.
Currently I am being told that for someone to remotely view reports that are stored in RS an individual needs to login to a PC's OS with the correct domain and user name. When they launch the browser it will them allow them access to the reports stored in RS.
This seems to limit the capabilities for a remote access
Can you go to any PC anwhere, type in the URL, and get a prompt for user name and password for access?
Will the user name and password allow restrictions to what you can see?
Is there anwhere where I can see an example of this? Like a dummy site or something?
I really appreaciate the help!
Mark
Phoenix
I installed SQL Server 2008 Express lastnight, and the server is running but I am unable to get Server Broswer, or Server Agent to start, when either is tried I get the following error:WMI Provider error.The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
View 5 Replies View Related
Hi all,
i installed two servers, one instance SERVER05 and second SQL SERVER EXPRESS called SQLEXPRESS.
my SQL Server Browser service is in state "Change Pending" i dont know if it is ok?
I setup SERVER05:
TCP/IP in Conf Manager Enabled, listen all yes, and IPAll TCP Dyn. ports nothing = blank, TCP PORT 2001
i think that SERVER05 is listening on port 2001 now.
i restart SERVER05 and try this command:
SQLCMD -E -S MACHINEASERVER05,2001
connect successful
I want to do this with SQLEXPRESS
i set TCP enabled, Listel all, Dyn port blank, TCP PORT 2002 restart and get error:
Unable to start service MSSQL$SQLEXPRESS on server MACHINEA
Additional information
The MSSQL$SQLEXPRESS service on MACHINEA started and then stopped. (ObjectExplorer)
Can u help where is problem?
Thnx for help.
Jakub.
I have some hyperlinks on different rows of a table in the report. Currently when I click on these, they open the links on the same page. I want the link to open in a new instance of IE.
I tried using "javascript:void(window.open('http://www.google.com','_blank'))" as the URL, but this will virtually do nothing.
Can somebody help please?
Thanks,
Steven
Hello Developers,
I used the add mining model to mining structure to modify a model so that maximum itemset =2, min prob=.01, min support= 2.
When i select maximum rows to anything higher than 2000 (default) i get duplicate rules.
The maximum rules returns is exactly16000 even though i set it higher than that.
Any ideas on the causes?
Thanks
Davy
I've installed the Developer's edition of SQL05 on my PC at home. I am able to open the reporting services via the Manager Studio and Windows login under my username and password, however I cannot open it in my browser when I enter the
http://computername/reports address. I get a login dialog and enter "computername/myloginID" for the user and my local login password. It will not accept the login and reprompt until I exceed 3 tries.
I also tried logging in with the PC's admin id and password as well as the sa account name and password.
Any ideas on what I missed in the setup or security?
Thanks for any assistance anyone can provide
mike...
Hello,
I use SQL Server 2005 for multi-user access. In the Surface Area Configuration, I changed the protocol from TCP/IP to Named Pipes and restarted the service. Then I went to SQL Server Browser, stopped it and clicked on Start to restart. I am getting a message "An error occurred while performing this operation". I am not able to get the Browser started.
Any help would be greatly appreciated.
Hi,
I have deployed my report to the report server and send a link to the users to view the report on the browser. But when the report is viewed, it shows up as "restore down" instead of "full screen". For example, the report shows up in the browser with all the information below.
SQL Server Reporting Services
Home > school > hwal> test >
Proficient By Ethnic within School and Grade Rdg and Math
How do I set up the report to make it show up as full screen report without all the details above?
Hi,
Does anyone know how to browse a report in a new browser window?
regards
Josh
I tried the instructions in sqlexpress's WebLog to connect to a remote database.
Using SQL Server Configuration Manager I enabled TCP/IP and then tried to start the browser service.
When I right clicked the icon, all the options (Start,Stop,etc) are grayed out.
Can anyone help me with this, please?
Thank you
Hi all, newbie here (to SQL Server and Visual Studio)...
After a few days of configuring and setting things up, I finally got visual studio 2005 to connect to my sql server 2005 express database. I used server management studio to construct a database with 8 linked tables for my first main application. I plugged in some data and, after setting up proper permissions, was able to get visual studio to connect and return data.
I set up a simple gridview on a page with a sql server connection object to test things out. When I set the connection string to return data from a single table, everything works fine. When I test the connnection within visual studio, I get the results I expect. I build the page and load it up in my browser through the localhost, and I get the expected results.
The problem comes when I try to use a view rather than a table. I build the view in server management studio, and from within visual studio, when I test the connection I get the expected results. However, after building the pages (and rebuilding the site), I get a blank grid in my broswer when I test through localhost. I added another gridview to the page set to a table with a different connection string, and that grid appeared in my browser. I modified that connection string in visual studio to the sql server view, and again, nothing appears in my browser.
I'm not sure if, during all of my tinkering with security and setups I may have inadvertantly shut off the abilty to use views, but I'm not receiving an error messages. I just get a blank page.
Any ideas?Brian
I have the following sql that retrieves the file from the database:
SqlConnection connection = new SqlConnection (ConnectionString);
SqlCommand command = new SqlCommand ("get_document", connection);
command.CommandType = CommandType.StoredProcedure;
What do I need to do to actually display this pdf file?
Users,
I am in a need of finding a browser based product that lets my users access SQL Server 7.0 through IE. Does anyone have any recommendations?
Thanks
Pete
Hi ,
I have got an SQL query which gives me some report against some data fed in .How can I set this query to run from a browser window .Meaning there will be some form where we input the data ( say date ) and run that query from the browser windows against that data .and the results are displayed in the browser window .
Thanks for your help
Does anyone know of a vendor who provides a packaged application that allows a user to pass T-SQL commands from a browser, to our IIS web server, to our SQL Server database?
Thanks!!!