Item Not Linked To Dataset, And Table1 Issue
Sep 20, 2006
Hi--
I have a report project in VS (2003). I have a report in that project that was working properly. I copied objects from that report to a new one and created a new dataset for the new report (under it's Data tab). Though both datasets (for each of the reports) seem healthy, i.e., they produce data when run, I am now experiencing the following problems:
1. In both reports, the datasets seem to be unlinked, somehow. I know this by right clicking on a field of the report, going to expressions, then selecting the Fields node. Instead of listing fields, as used to be the case, it now says "Report item not linked to a dataset."
2. If I attempt to preview either of the reports, I get an error that reads, "The table 'table1' refers to an invalid dataset name 'MedMgmt.' MedMgmt is the dataset name of the first report. I changed it to another name, but I still get the same message.
I have clicked and right-clicked everywhere and have not found a way to re-link the dataset to the report. Why Reporting Services can't figure out that the dataset in the report's Data tab is the dataset to link to is a point of deep annoyance, but whatever... If anyone can please help me solve these problems, I would be very grateful! Thank you!
View 5 Replies
ADVERTISEMENT
Feb 28, 2008
Hi all,
I have some problem about parameter to query data. My parameter is available from dataset but it doen not have blank or null value. So when I want to select this...
SELECT *
FROM mytable
WHERE (@param_person_id IS NULL OR @param_person_id = person_id)
cannot success. This statement means "if @param_person_id has null value, this statement is select every person_id. On the other way, if @param_person_id is not null value, this statement select only specific person_id".
So I want to add blank or null value to my dataset for working with select statement.
How can I do?
Thank you very much
View 1 Replies
View Related
Feb 1, 2008
Hi everybodyI'm a newbie to SQL-Server 2005 so please excuse me for my silly questionsRecently i wrote a simple web-Page in which i select data from a table and then bind them to a GridView on the formevery thing was simple as follows:
SqlConnection Con = new SqlConnection("Data Source=.;Initial Catalog=Test;Integrated Security=True"); Con.Open();
SqlDataAdapter da = new SqlDataAdapter("SELECT [ID], [Name], [Date] FROM [Table1] ORDER BY [Date]", Con); DataSet ds = new DataSet(); da.Fill(ds,"MyTable");
GridView1.DataSource = ds.Tables["MyTable"]; GridView1.DataBind();
But I have a question , when i change the [Table1] to [table1] (With lowercase T) , i receive the following errormessage:
Invalid object name 'table1'.
why is that? could anyone help me? even i tried to test this issue in [Microsoft Management Studio] and i got thesame result . realy what's the reason? before and with sql server 2000 i didn't have these issue.
Thanks in advance.Regards.
View 5 Replies
View Related
Jun 27, 2007
For a table 'table1' in sqlserver 2000,
table1(col1) is clustred index 'Ix1' and table1(col1,col2,col3) is nonclustered index 'ix2'
is not tabel1(col1) 'ix1' a duplicate/redundant index ?
which index should be retained ?
or should both indexes remain on the OLTP table ?
Thanks a lot in advance.
View 1 Replies
View Related
Dec 6, 2013
I have a BOM table with all finished item receipes and semi items recipes. create a query where semi item materials are also listed in finished item recipe.
View 5 Replies
View Related
Mar 6, 2007
Hi,
Here's my problem. I have 2 tasks defined in my Control Flow tab:
EXECUTE SQL--------->EXECUTE DTS 2000 PACKAGE
When I attempt to run it, by right-clicking the EXECUTE SQL task, and selecting "Execute Task", it only runs the EXECUTE SQL part (successfully), and does not "kick off" the EXECUTE DTS 2000 PACKAGE, after it is done running (even though it completes successfully, as shown by the green box).
Yes, they are connected by a dark green arrow, as indicated in my diagram above.
Why is this?? Am I missing something here? Need help.
THANKS
View 3 Replies
View Related
Jul 12, 2007
Hello,Basically, I have a table with 2 fieldsId item#1 33332 33333 22224 22225 22226 33337 33338 3333I would like to only select the last identical Item# which in this case would be the id 6,7 and 8Any idea how could I do that?Thanks
View 1 Replies
View Related
Jan 18, 2007
hi everyone
what the matrix's class name ?
where is the matrix's dll?
Can i create a new class extends the matrix?
I want to override the matrix's onpaint method.
Can i do this ?
why the table not have the column group?
View 9 Replies
View Related
Oct 16, 2014
I am having trouble finishing the last bit of a report. The report shows orders that customers have placed that contain 0 promo items, All promo items (all items in order are promo items), and a mix of promo and non promo (at least 1 promo item and 1 non-promo item). Ive simplified this a bit for ease of understanding but lets assume we have 2 tables: A Promo table that contains the items on promotion and the dates that promotion is valid, and a Sales table, that contains the order number, order date, and sku ordered.
I've already written code that finds orders that have at least 1 promo item in them, and using that, I can determine what orders have 0 promo items in them. Where I am stuck is taking the orders that have at least 1 promo item in them, and separating them into orders that have only promo items, and those that have both promo and not promo items in them. Also, there are several promos throughout the year (called "Offers") so in my code below, you can see 2 different Offers ("JF" and "MA") with their corresponding dates they are valid. They will never overlap. My results also have to be split out by Offer so management can look at the results of each offer separately. Here is some code:
Code:
create table #Promos (
Offer varchar(2) null,
SKU int null,
StartDt date null,
EndDt date null
[Code] ....
So my results should show OrderNo A1111 in the Promo and No Promo group because of SKU 5 not being promotional during the time that order was placed. OrderNo A2222 should be in the Promo Only group because both SKUs on the order were promotional at the time the order was placed.
View 6 Replies
View Related
May 26, 2015
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters. I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 0 Replies
View Related
Oct 1, 2015
I have a small number of rows in a dataset, Table 1. There is a CLOB on a large dataset, Table 2. They join on a PK. I would like to retrieve this CLOB and add it to the data flow for Table1. In short I want to emulate the following:
Table 1: Small table without CLOB, 10 rows.
Table 2: Large table with CLOB, 10,000,000 rows
select CLOB
from table2
where pk = (select pk from table1)
I want this to return the CLOBs for the small number of rows in Table 1. The PK is indexed obviously so it should be a fast look up.
Table 1 and Table 2 live on different Oracle databases. How do I perform this operation efficiently in SSIS? It seems the Lookup and Merge Join wont do this.
View 2 Replies
View Related
May 27, 2015
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 3 Replies
View Related
May 21, 2007
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
View 2 Replies
View Related
May 5, 2008
Hi,
How do you express neither no in TSQL. I am trying to create a view that gathers work orders that are neither in one table nor in another
I tried the following few appraoches but feel there must be something better. thanks!
1.
Select *
FROM xyz
WHERE Status = Open
AND (Number
NOT IN (SELECT WONumber
FROM dbo.Table1)
OR Number
NOT IN (SELECT WONumber
FROM dbo.Table2))
2.
Select *
FROM xyz
WHERE Status = Open
AND Number
NOT IN (SELECT WONumber
FROM dbo.Table1)
UNION
Select *
FROM xyz
WHERE Status = Open
AND Number
NOT IN (SELECT WONumber
FROM dbo.Table2)
View 1 Replies
View Related
Oct 12, 2007
Is there any way to display this information in the report?
Thanks
View 3 Replies
View Related
May 20, 2005
Is there anyway or a sql statement that can do something like, Select * from table1 where table1 not in table2.which means i get all the rows in table1, as long as they r not in table2
View 2 Replies
View Related
Sep 23, 2005
Hi,
I have a problem I have two tables, table1 my main table and table2 my secondary table.
Table1 has lots of records with a field for a unique transaction number, table2 also has a field for a transaction number.
Table 2 only has a 10 entries in with the same transaction number of
10 of the entries in table1.
My question is how do I get all the records from table1 that DONT have a corrisponding transaction number in table2.
Thanks
Paul
View 2 Replies
View Related
Nov 22, 2007
Hi
I have table1 with tow columns ( col1 and col2)
table2 colums (col1 and col2)
Table1 -- col1--- col2
-----------A ---- dfg
-----------B ---- ght
Table2-- Col1--- col2
-----------A ----- jjk
-----------B ----- lkl
How do I update col2 of Table1 with the data from col2 of Table2 in a Single Query
View 3 Replies
View Related
Jan 22, 2007
Hey ya'll...
I need to create a query that I can run that will allow me to essentially take the first initial and last name and combine them from two columns in one table and update one column with that new data in another table. Example of need:
UPDATE tblLogin.UserName with (first character(tblEmployee.FName)+(tblEmployee.LName)) WHERE tblLogin.EmployeeID = tblEmployee.EmployeeID.
That was TOTALLY pseudo code and I know I'll need a join statement in there somewhere. Both tables reside on the same database, such as this:
dbEMPLOYEE (Database)--> tblLogin (Table)----> UserName (Column)--> tblEmployee (Table)----> FName (Column)----> LName (Column)
Any help would be GREATLY appreciated! Hopefully something soon - this was handed to me a few minutes ago and I have a few minutes to get it done.iSheahan
View 5 Replies
View Related
Mar 9, 2004
i have tow table same structure
how i can copy the data in table1 to table2
in T-SQL statment
thanx
View 1 Replies
View Related
Oct 1, 2004
Hi,
I'm using MSSQL and I have 2 tables with same structure. Can any one tell me the easiest way on how to select a row from table1 and insert it into table2.
Many thanks.
View 1 Replies
View Related
Jan 13, 2006
Dear all,
My question about SQL statement:
Table1 - Fields: T1PK, T1Field
Records:
1, ABC
2, DEF
3, GHI
Table2 - Fields: T2PK, FK (join T1PK), T2Field
Records:
101, 1, XXX
102, 1, YYY
103, 1, XXX
104, 2, XXX
I want to write a SQL statement that join Table1 and Table2 together, T2Field equal to XXX, and list all records from Table1.
That's the result columns: T1PK, T1Field, T2PK, T2Field
Result records:
1, ABC, 101, XXX
1, ABC, 103, XXX
2, DEF, 104, XXX
3, GHI, NULL, NULL
Is it possible? Please help!!
Joey
View 2 Replies
View Related
Feb 1, 2014
I have two tables with similar two columns as shown below
table1
code | organisation
256 | abc
832 | xyz
893 | tax
921 | abc
951 | abc
table2
code | organisation
951 | abc
832 | xyz
256 | abc
893 | tax
921 | tax
Now, I want to check whether all the codes in table1 existing in table2 and list them, and if both columns from table1 is matching with the both columns in table2. For e.g. 256|abc in table1 is matching with 256|abc in table2
The output should be :
921 | tax
For e.g. 256abc is there or not in table2,
View 5 Replies
View Related
Jun 26, 2014
I have a table table1
ID Date In Out
22 01/01/201410:00 11:00
22 02/01/201410:00 11:00
22 03/01/201410:00 11:00
23 01/01/201410:00 11:00
23 02/01/201410:00 11:00
23 03/01/201410:00 11:00
24 01/01/201410:00 11:00
24 02/01/201410:00 11:00
24 03/01/201410:00 11:00
25 01/01/201410:00 11:00
25 02/01/201410:00 11:00
25 03/01/201410:00 11:00
Table 2
ID Date In Out
22 01/01/201410:00 11:00
22 02/01/201410:00 11:00
22 03/01/201410:00 11:00
23 01/01/201410:00 11:00
23 02/01/201410:00 11:00
23 03/01/201410:00 11:00
24 01/01/201410:00 11:00
24 02/01/201410:00 11:00
24 03/01/201410:00 11:00
I want to insert only those record from table 1 to table 2 which is not there in table 2
View 3 Replies
View Related
Oct 17, 2014
HOW TO SELECT LAST ROW IN GROUP BY CLAUSE AND JOIN LAST ROW WITH ANOTHER TABLE IN ONE QUERY?
INPUT:
custidlivingstatusdate
1single2014-01-01 00:00:00.000
1married2014-01-02 00:00:00.000
1married_kids2014-01-03 00:00:00.000
2married_kids2014-01-04 00:00:00.000
2married2014-01-05 00:00:00.000
2single2014-01-06 00:00:00.000
Query 1 -- select last record
SELECT *
FROM
(SELECT ROW_NUMBER() OVER(PARTITION BY Custid ORDER BY Date DESC) AS Seq,*
FROM Living_Situation
)t
WHERE Seq=1
Output:
Seqcustidlivingstatusdate
11married_kids2014-01-03 00:00:00.000
12single2014-01-06 00:00:00.000
Table Customer:
custidsexesurname
1mjansen
2mpietersen
How to link Query 1 with table Customer in one query?:
Desired output in ONE query:
custidsexesurnamelivingstatus
1mjansen married_kids
2mpietersen single
View 3 Replies
View Related
Feb 2, 2007
I have a report which has subreport in it. the textbox5 has a countrows() function hooked and i want to
=sum(Subreport1.table1.textbox5.value), is it possible.
subreport control is pointing to childreport.rdl
childreport.rdl has - Table1 and textbox5
Thank you very much for the info.
View 1 Replies
View Related
May 7, 2008
Hi,
I have a stored procedure attached below. It returns 2 rows in the SQL Management studio when I execute MyStorProc 0,28. But in my program which uses ADOHelper, it returns a dataset with tables.count=0.
if I comment out the line --If @Status = 0 then it returns the rows. Obviously it does not stop in
if @Status=0 even if I pass @status=0. What am I doing wrong?
Any help is appreciated.
ALTER PROCEDURE [dbo].[MyStorProc]
(
@Status smallint,
@RowCount int = NULL,
@FacilityId numeric(10,0) = NULL,
@QueueID numeric (10,0)= NULL,
@VendorId numeric(10, 0) = NULL
)
AS
SET NOCOUNT ON
SET CONCAT_NULL_YIELDS_NULL OFF
If @Status = 0
BEGIN
SELECT ......
END
If @Status = 1
BEGIN
SELECT......
END
View 4 Replies
View Related
Feb 15, 2006
I am afraid that just after @statusOfEmployee is retrieved from table1, but before table2 is updated, someone else (a second user) calls this same stored procedure and changes the @statusOfEmployee value. This would create an inconsistent update of table2 by first user, since the update of table2 'might' not have gone ahead if the latest value of @statusOF Employee was used. CAN SOMEONE PLEASE HELP ME WITH THIS SITUATION AND HOW I CAN BE SURE THAT ABOVE DOES NOT HAPPEN SINCE MULTIPLE USERS WILL BE HITTING THIS STORED PROCEDURE?
declare @status intbegin transet @status = (select statusOfEmployee from table1)if @@ERROR = 0 begin update table2 set destination = @destination /* @destination is an input parameter passed to the sp*/ where @currentStatus = @status if @ERROR = 0 commit tran else rollback tran endelse rollback tran
return
View 7 Replies
View Related
Dec 17, 2013
I'm trying to update a value into a table a sum. The two tables have ID values. These ID values appear once in Table1 and multiple times in Table2. I'm currently trying to sum up the values in Table2 where the IDs are equal to Table1 and then update the value:
UPDATE [Table1] SET
[Total] =
(SELECT SUM([Table2].[QTY]) FROM [Table2],
[Table1] WHERE [Table1].[ID] = [Table2].[ID]
GROUP BY [Table1].[ID])
FROM [Table1], [Table2] WHERE [Table1].[ID] = [Table2].[ID]
View 2 Replies
View Related
Jul 23, 2005
Hi guys,i have a little problem here.im attempting to write a stored procedure that compares two tables ofthe same data structure and adds (inserts) extra records that exist intable1 to table2.My problem is that i dont have a unique identifier between the tables.i think someone said that i needed to build up a keyany ideas greatly appreciated ??C
View 1 Replies
View Related
Oct 10, 2006
We have an inventory table (Items) that contains item_no and qty_on_handfields.Another table (Item_Serial) contains serial numbers for any item that hasserial numbers.If an item has 10 qty_on_hand, it should have 10 records in Item_Serial, oneunique serial number for each item.I am trying to find items where the number of serial numbers does not equalthe qty_on_hand.Here is a query I'm trying to use and, of course, it does not work:select Items.item_no, Items.qty_on_handfrom Items inner join Item_Serial on Item_Serial.item_no = Items.item_nowhere Items.qty_on_hand <count(Item_Serial.item_no)Anybody know how to do this?Thanks.
View 4 Replies
View Related
Aug 16, 2007
Hello,I have 2 tables, Table1 and Table2. I have copied all data from Table1to Table2.However Table1 is dynamic it has new rows added and some old rowsmodified everyday or every other day...How can I continue to keep Table2 up to date without always having tocopy everything from Table1?Basically from now on I would only like to copy new rows or modifiedrows in Table1 to Table2 and skip rows that are already present andhave not been modified in Table1. I would like to not do anything forany rows that were removed in Table1 and continue to keep a copy ofthem in Table2.Is using a DTS package the best way to automate this update of Table2to make sure Table2 is always up-to-date with Table1?Thanks for any help or advise :-)Yas
View 14 Replies
View Related
Jul 20, 2005
Hi,I am getting errors in the following... Is it even possible to join onCONTAINS?SELECT ListA.ContentFROM ListA LEFT OUTER JOIN ListBON CONTAINS(ListB.Content, ListA.Content)WHERE ListB.Content IS NULLThanks!
View 4 Replies
View Related
