Hi,
I want to log updates to specific fields, storing the new and old
values. Is there any way I can iterate the collection of updated
fields within a trigger in order accomplish this?
Thanks in advance,
Julie Vazquez
I need to create a table that only allows fields to be updated if the field value is NULL. Is there anyway to configure a table in this manner?
In the example below the record will be created with a serial number and verification ready flag set to true. Other processes down stream will update the remaining fields as needed but should not update fields that have already been initialized.
Table Definition
USE [DB_AUTOMATED_PACKAGING_SYSTEM]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[TBL_LABEL_VERIFICATION](
[SerialNumber] [varchar](50) NOT NULL,
[VerificationReady] [int] NOT NULL,
[VoidLabelImage] [image] NULL,
[VerifiedBy] [varchar](50) NULL,
[VerifiedDate] [datetime] NULL,
[Verified] [int] NULL,
CONSTRAINT [PK_TBL_LABEL_VERIFICATION] PRIMARY KEY CLUSTERED
(
[SerialNumber] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
is there a Trigger that monitors updated rows? I would like to run a
insert into sometable (pkcolumnname)
select pkcolumnname from monitoredtable where ????
"i dont know what goes here to only get value of rows that have been updated"
Hello
I am a newbie creating triggers and I would like to know what is the name of the updated logical table. That is, since the are identifiers like "inserted" and "deleted" that represent the inserted and deleted rows, respectivaly, I presumed that "updated" existed - but it does not.
I have a table with a column named "UpdatedTimeStamp" which I would like to update anytime the other columns are modified. I intended to create the following trigger:
create trigger myTrigger
on myTable
after update
as
update updated set UpdateTimeStamp=GetDate()
Of course, "updated" is not a valid identifier that represents the updated row.
Please, help me in creating this trigger. What is the correct way of doing a trigger like this?
Thanks a lot in advanced.
Hi,
We have a column syncUpdate in some tables and we need a trigger (or one for each table) which will set the current dateTime for the syncLastUpdate (dateTime) when either the row is inserted or updated (we have to ignore the syncLastUpdate column itself as this would be an infinite loop, I think).
I don't know much about DB but I think that is easly doable.
Can anyone help me with that, please?
Cheers
Hi,
I am creating update trigger(After) on a table.I want to catch an updated row and insert the values of this row into
a new table.How can i catch this row while creating a trigger after update.
Hi,
I'm using sql-2005.
I want to update several columns in different tables whenever an update is happend on specific table. I have a trigger for that which update all the relevant places when it fires.
I want to do this update only if certains columns were changed, otherwise - do anything, to reduce performance.
How Can I know which columns were updated inside the trigger? The tables has many columns and only if 2 of them were changed then I need to update other tables.
Many thanks,
Nira.
Hi All,
I am using a trigger. I want to get the data of a row before updating inside this trigger and insert it into a backup table. Please anybody help me. Example with code is highly appreciated.
Thanks in advance.
I am having a hard time understanding triggers. My goal is to put a trigger on table x where records are UPDATED or DELETED. When this trigger fires I need to take the record ID and put the ID modified record into table y with the date modified. so basically logging the recordid changed with the getDate()
I don't quite understand how to get the rowid of the modified record.
I have a Trigger Instead of Update.
When I Update my table, the trigger runs correctly but my table never is updated.
Im using a trigger to check updates on particular table and execute a email. it works but it doesnt show the right record
im looking into one table called SiteInfo.
here is my code
Im using sql 2005, can someone look at my code or the select statement.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE TRIGGER TTSUpdate
ON SiteInfo
FOR UPDATE
AS
declare @SiteID varchar(10)
declare @Body2 varchar(2000)
declare @Sitename varchar(50)
declare @TTSCreate varchar(30)
declare @TTSCreator varchar(50)
declare @Subject2 varchar (100)
SELECT @SiteID = SiteID,@Sitename = AccountName,@TTSCreator = TTSOwner,@TTSCreate = TTSCreatedDate
from SiteInfo
SET @Body2 = 'New TTS site created: ' + @Sitename + ' With TTS Site ID:' + @SiteID + ' TTS was created on: ' + @TTSCreate + ' By:' + @TTSCreator
SET @subject2 = 'New TTS site created: ' + @Sitename
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'TTSAdmin',
@recipients = 'email address here',
@subject = @subject2,
@body = @body2
GO
Hi
Apologies if this is a silly question
I have a basic table "Customer" which has
Id
Address1
Address2
Address3
Town
County
Postcode
SearchData
After I insert or Update a row in this table I need to update the SearchData column
with
UPPER(ADDRESS1) + UPPER(ADDRESS2) + UPPER(TOWN) + UPPER(POSTCODE)
only for that Id
I'm sure this is only a basic update but all the examples I can find are for inserting into other tables not the row itself.
Regards
David
I've gotten conflicting info about this in the past so I thought I'd try to get clarification.
When a record is deleted, I'm sure it fires the delete trigger. Does it also fire the update trigger?
Thanks
Hello,
I am using SQL Server 2005 and ASP.NET 2.0. We have a very simple content management system where we have to keep track of date last modified for each row in all of our content tables. I know there's a "timestamp" datatype that is used for replication scenarios, but is there anything similar that I can use to set up a date_modified column for each of my content tables that will automatically update with GETDATE() whenever anything in a given row is updated?
Or do I have to create a date_modified column of smalldatetime datatype and write a trigger on update for EVERY single table of content that I have in the database? It seems there should be an easier way to do this than to write 20 triggers for my 20 content tables.
Thanks!
Trigger not running when trying to select data from a column that is being updated?
View 1 Replies View RelatedI am looking to created a trigger that inserts records into a log table to show the stored porcedure that has updated a specific column to a specific value in a specific table
At present I have:
CREATE TRIGGER [dbo].[trUpdaterTable]
ON [dbo].[t_account]-- A DB level trigger
FOR UPDATE
--Event we want to capture
AS
IF update (document_status)
[Code] ...
However this doesn't appear to bring back the procedure that triggered the update...
The value the trigger should update on is document_status = 0
DDLProcExecutedByEventDate
NULLNULLLOMBDAadministrator2015-06-25 07:42:01.677
NULLNULLLOMBDA im64602015-06-25 07:51:34.503
NULLNULLLOMBDAadministrator2015-06-25 07:52:01.610
NULLNULLLOMBDAadministrator2015-06-25 08:02:01.417
CREATE TRIGGER [dbo].[trTableupdateaccount] ON [DoesMore].[dbo].[t_account]
[Code] ....
Hi guys, may I know is it possible to create an update trigger like this ? Assuming there are two database, database A and database B and both are having same tables called 'Payments' table. I would like to update the Payments records on database A automatically after Payments records on database B had been updated. I can't use replication because both tables might having different records and some records are the same. Hope can get any assistance here, thank you.
Best Regards,
Hans
Hi all,
I have a ranking system where I wish to update the ranking every time a result is reported. Performance is no issue what-so-ever. More specifically, two players are to devide their points after each series of games to reflect the fraction of over-all games that each player have won.
I've written the trigger below, but Visual Web Developer 2005 Express (SQL Server 2005 Express) complains about the references to the 'inserted'-table.
I find it very difficult to transform the code below to something that looks like the examples found in documentation.
Could someone get me started in the right direction?
Thanks in advance,
Anders
create trigger result_insert on result
after insert as
begin
declare @won1 as int
declare @won2 as int
declare @oldRank1 as float
declare @oldRank2 as float
declare @oldranksum as float
select @won1 = sum(wongames1) from result where player1 = inserted.player1 and player2=inserted.player2
select @won2 = sum(wongames2) from result where player1 = inserted.player1 and player2=inserted.player2
select @oldrank1 = Rank from RankingInfo where memberid = inserted.playerid1
select @oldrank2 = Rank from RankingInfo where memberid = inserted.playerid2
set @oldranksum = @oldrank1 + @oldrank2
update rankingInfo set Rank = @won1 / ( @won1+@won2) * @oldranksum where memberid = inserted.player1
update rankingInfo set Rank = @won2 / ( @won1+@won2) * @oldranksum where memberid = inserted.player2
end
greetings!! the below trigger works fine in SQL 2000 and doesn't takeup much resources, it's a very simple solution to trim text fields atinput in SQL. I know a lot of folks will say to create input masks atthe UI level and that SQL is a restricted back-end DB, but to be quitehonest I don't trust those UI guys and as a DBA I will have to cleanthe mess when they forget to validate. Hope it can be usefull to anyof you too. ;)----------------------------------------------------------------------CREATE TRIGGER [TRIMMER_TGR] ON [dbo].[MyTable]AFTER INSERT, UPDATEASIF UPDATE (MyStringField)DECLARE @TRIMMEDFIELD NVARCHAR(50)DECLARE @MYID INTSELECT @TRIMMEDFIELD = MyStringField from InsertedSELECT @MYID = ID from InsertedBEGINUPDATE tblDocket SET MyStringField = RTRIM(LTRIM(@TRIMMEDFIELD))WHERE ID = @MYIDEND
View 6 Replies View RelatedIf the id1 will change in table1 it should also change the corresponding id1 field in table2 it does not do anything.
CREATE TRIGGER [dbo].[IDCHANGE]
ON [dbo].[table1]
AFTER UPDATE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
I want to update a field with a trigger only if a specific field is updated.
When I try the code below, it updates the field when any field in the record is updated. Is there a way to only make look at picked_dt?
ALTER TRIGGER [dbo].[UpdatePickedDate]
on [dbo].[oeordlin_sql]
after update
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
I need creating an update trigger that involved two tables and a few fields.
tblCases
Fields
Defendent1
Defendent2
Defendant3
tblCaseBillingDetails
Fields
DefCount
I would like to create the trigger on tblCaseBillingDetails so that when the data in the Defendant fields are updated, the trigger fires and updates the Defendant count DefCount.
Hi,
I have a 6 different textboxes in my web application. I have 6 different tables in my database such as tbl1,tbl2,tbl3 etc.
When the user clicks the submit button I have to check whether the values in the textboxes match the value in the database. (if in txt1 the user enters 3 I need to go to tbl1 and check if there is such a value).
What is the most efficient way to perform such a check? Will I need to write 6 select statements or can I use a loop and if I can use a loop I would appreciate an example
Thanks
I have a trigger that writes changes to an audit table. In the case of Updates, I only want to write out the fields that have actually changed. My code for COLUMNS_UPDATED evaluates to true for all varchar fields, even when they haven't changed. All other scenarios appear to be working correctly.
WHILE @field < @maxfield
BEGIN
SELECT @field = min(ORDINAL_POSITION) FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = @TableName AND ORDINAL_POSITION > @field
SELECT @bit = (@field - 1 )% 8 + 1
SELECT @bit = power(2,@bit - 1)
SELECT @char = ((@field - 1) / 8) + 1
IF ((@TriggerType = 'I') OR (@TriggerType = 'D') OR (@TriggerType = 'U' AND substring (COLUMNS_UPDATED(),@char, 1) & @bit > 0))
BEGIN..........
END
END
Ideas? Thanks!
how do you iterate through each record in a table within a user-defined function...
bit new to sql server so need some help asp. thanks
Hello,
I have an SQL task which returns a set of dates, and I would like to iterate over this set, re-assigning the date to a global variable each time (User::CurrentDate), so that I can perform a number of tasks based on this date.
Can someone show me how this is possible in SSIS?
Thanks,
Simon
hi
i have table i use it for update insert
and the users use this table from a grid on the web
and i need to prevent from white space in the fields in table
so how to
create TRIGGER remove white space from a fields in table scan and fix it ?
Code Snippet
SELECT TRIM(fieldname)
, LTRIM(fieldname)
, RTRIM(fieldname)
, LTRIM(RTRIM(fieldname))
FROM tablename
Code Snippet
WHERE (LTRIM(RTRIM(fieldname)) = 'Approve')
Code Snippet
replace(@text,' ','')
create TRIGGER on update insert and not to damage the text in the all fields
TNX
Hi all
I am wanting to continuously monitor a source table throughout the day and as data becomes available, process it and insert it into one of a number of tables.
I have tried achieving this using a FOR LOOP and setting the halt condition such that it is not stisfiable. However, this has a couple of problems:
1) It runs in a tight loop and consequently degrades system performance enormously.
2) I can't get transactions to work. I would like each iteration of the loop to spawn a new transaction under which the tasks in the loop can run. Therefore, if one of the tasks fails during such an iteration, only the updates affected by that iteration are lost.
Ideally, I would like to be able to put a wait statement within the loop container so that it runs every couple of seconds. And would also like to implement transactions as described above.
All help is appreciated.
Jays :-)
Hello everyone, I have a table in which I need to iterate field, possibly several rows, when I enter a new record with the same item ID number. An example will make this much clearer.
ItemID CurrentLocation Iter
A01 Inventory 1
A01 Cutting 0
A01 WIP 2
B01 WIP 0
B02 WIP 1
B02 Inventory 0
I dont want to delete any old rows so that I can keep a history of where each item has been. The iterative column is in reverse order so that 0 is the newest value (location) and higher numbers are older locations. An item could go through a CurrentLocation several times.
Now, if I insert a row with ItemID = A01 and Current Location = Polishing, I want the Iter field of all previous rows to iterate by +1 and this new row to have Iter = 0.
What would be the easiest, best way to do this? Use a stored procedure or do it in my code or what? I'm pretty new at SQL server so if i'm missing a better way to accomplish the same thing, then please point me in that direction. Thanks for your help and/or time.
Scott
Hi,I want to save the last modification date when the row is updated. I have a column called "LastModification" in the table, every time the row is update I want to set the value of this column to the current date. So far all I know is that I need to use a trigger and the GetDate() function, but could any body help me with how to set the value of the column to getdate()? thanks for your help.
View 3 Replies View RelatedHello all,
I have recently started working on a project which involves using MSSQL to access a simple database. I have worked with Postgres SQL before, so I have a general idea of what SQL can be used for, but I'm having some difficulties applying that knowledge to MSSQL.
Currently, I would like to do the following (in abstract terms):
declare tmp record
select column1 from tableA into tmp
for each entry from above selection do
insert into tableB values (tmp[column1], 0, 0, 0)
I remember doing something like this fairly easily in postgres. Trying to put that into MSSQL, I have:
CREATE FUNCTION dbo.newDay (@mDate datetime)
RETURNS int
AS
BEGIN
DECLARE @id int
DECLARE item_cursor CURSOR FOR
SELECT id FROM tblKitchenCat
OPEN item_cursor
FETCH NEXT FROM item_cursor INTO @id
WHILE @@FETCH_STATUS = 0
BEGIN
INSERT INTO tblKitchenList VALUES (@id, 0, 0, 0, 0, 0, @mDate)
FETCH NEXT FROM item_cursor INTO @id
END
CLOSE item_cursor
DEALLOCATE item_cursor
RETURN 0
END
GO
I get a syntax error next to AS... what is it?
Can somebody please help me out here... any articles related to moving to MSSQL from Postgres would also be highly appreciated.
In addition to that, I would like to schedule a particular function to run once a day, say at 2am. Is there a way to do this using MSSQL?
Thanks in advance.
Cheers,
Michael
Hi There,
Can someone please let me know what is the best way to iterate the output rows of a script component and stick in those ids in a where clause of a select query (to retrieve additional info from a database)? Is this possible at all? If not, what is the best way to deal with this situation?
Thanks a lot!!
Hi All,
In one of my interfaces ,Source is flat file which has field called StoreID in the Detail Record.
StoreID can be Multiple.Now I have to generate different files for Each StoreID present in the Source file.
To achieve this first I populate the data from the file into a Temp Table and use ForEach ADO Enumerator to iterarate based on StoreID and produce different files.This is giving a satisfactory result.
But now i have to change the flow so that Temp table is not used,i.e i have to iterate directly from the flat file.
Do we have a built in enumerator to achieve this.
or should we do this in Script task only??
any other Options??
Thanks in Advance...
cheers
Srikanth