I have a Job Step defined to execute a SSIS Package. This SSIS package contains a Script Task. The Job fails with the message "Package execution failed. The step failed."
View 23 RepliesWe are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file:
username
password
cd omb
asc
get STRMASTER
quit
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
I have a simple SSIS package that imports an Excel Spreadsheet into a table. The column heading got changed, so the package failed, as expected, but I would like an alert or some way to make the scheduled job show "failed". I tried putting an event handler on the :Data Flow" step to send an email, but it didn't work.
I would like to figure out the event handler problem, but more important to have the job show as failed.
For some reason the Scheduled job shows "success" even though the SSIS package failed. A better solution is to make the scheduled job itself fail, based on the package failing.
This is a bug that I submitted to Microsoft. I wanted to see if anyone could assist me with a work-around.
1. Create a new DTS Package
2. Add an ActiveX Task and change 'Main = DTSTaskExecResult_Success' to 'Main = DTSTaskExecResult_Failure'.
3. Running this package will result in a Failed package.
4. Save Package as 'Failure' to local server
5. Create another new DTS Package.
6. Add an 'Execute Package' task, and configure the properties to have it launch the saved 'Failure' child package.
7. Add an ActiveX task and then click ok to close it.
8. Select the Execute Package task (which executes the failure package), hold control and click the ActiveX task. Add an 'On Success' Precendence constraint from the 'Workflow' menu.
9. Now execute the package. Notice that the ActiveX task will execute even though the Execute Package task FAILED.
10. If you change the Precendence constraint from 'On Success' to 'On Failure' the ActiveX task will not run, because the package thinks that the Execute Package task completed with success.
In summary... if a child package, executed by an Execute Package task fails, the Execute Package Task ALWAYS "reports" success to the following precedence constraint and the package continues to run. Even if 'Fail Package on first error' is enabled. Although you will see that the task actually failed while watching the status of the package execution.
I am currently trying to write vbscript in an ActiveX task that will follow an Execute Package Task. I am trying to make the vbscript check and see if the previous task really did succeed or fail, and then make the ActiveX task succeed or fail as required to make the precedence constraints work properly.
I have replicated this problem on many different machines.
---------------------------------------------------------------------------
Any ideas for my ActiveX task? I am trying to access the StepExecutionResult from the Execute Package task, and I have been unable to. If I can get the Step Execution reult, then I can in turn cause the ActiveX task to suceed or fail, based on the execution result of the Execute Package task.
Thank you for your time,
David Zebrowitz
dzebrowitz@apartners.com
I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?
Hello,
I am using SQL Server 2005 Integration Services to create new values for my tables. One step I must do is execute a query and the script task that receive its constraint (it is set to completion) must do different things depending on the query result.
My question is: how can I know the result of the precedence constraint?
Thank you,
Pablo Orte
I have this SSIS package which just doesn't seem to run when executing as a sql job and I keep getting this error:
"The command line parameters are invalid. The step failed."
I read some of the comments in forums and they were suggesting to verify the command line for the sql job since there is known bug in the command line for sql job.
But that didn't seem to resolve it and the reason could be one of the variable values that I am trying to set.
In this package one of the variables that I am trying to set is the connection string and my command line looks like this
dtexec /SQL "TestPkg" /SERVER [SVRNAME] /MAXCONCURRENT "-1" /CHECKPOINTING OFF
/SET " package.variables[User::MetaDataConnectionString].Value";"Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;"
When I try to run this from the command line I get the error as:
Argument " package.variables[User::MetaDataConnectionString].Value;Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;""
for option "set" is not valid.
I think the issue is in the set parameter where it seems to be intepreting the ;'s in the connection string as part of its command (which I seem to be escaping by putting them in quotes but it seems to be stripping them off)
Has anyone else encountered this issue? Is there any other escape character that I should be using?
Any help will be greatly appreciated.
Hi all,
I am new to SQL Server 2005 (but many years in SQL Server and .NET), and I am sort of having everything figured out for my company. However, one thing that still bothering me is that:
In the old Server 2000, you can execute a single step in a DTS package by right click the step and then click execute step.
In the new server 2005, I can only execute the whole package from the Management Tool and Edit the pack from VS 2005. Is there also a way for me to execute a single step in a SSIS package?
This is important for us, many thanks!
I've deployed an ssis package to the database server through the manifest file over the network..
The package runs great when testing through vs.net on my client.
I've added the package to a job step in the sql server job agent.
When I test the new job, the package step fails, but there is no error or log information in the job history.
Wwhere can I get error information? And/or How can make SSIS error information more verbose in the job history?
Thanks for any help or information.
I have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
Thanks
B.
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
I have created a Test SSIS Package within BIDS (VS 2K8, v 9.0.30729.4462 QFE; .NET v 3.5 SP1) that connects to our Test Listener.
There is only 1 Connection Manager Object, and OLE DB Provider for SQL Server.
The ConnectionString lists: Provider=SQLOLEDB.1;Integrated Security=SSPI
The Test Connection within BIDS works.
The Package Control Flow has just 1 Object, and Execute SQL Task that performs an Exec on an SP that contains only a Select (Read).
The Package runs within BIDS.
I've placed this Package within a Job on the Primary Node. Ive run the job successfully using 32 bit runtime on and off. The location of the file on the server happens to be on a share that resides on what is currently the Secondary Node.
When I try to run the exact copy of this Job on the Secondary Node (Which has been Set up for Read All Connections; Yes), I get an error, regardless of the 32 bit runtime opiton. At this point, the location of the file is on the Secondary Node.
The Error is: "Login failed for user 'OurDomainAgent_Account'".
The Agent is a member of NT ServiceSQLServerAgent on both instances, and that account is a member of SysAdmin. Adding the Agent account as well, and giving that account SysAdmin, makes no difference either.
Why can't I get this to work?
Hi
I posted this on the sql server security forums too. Here is the error that i get when i change the type of the step to ssis
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Additional information:
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)
This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"
I have made the following configurations:
The user group (windows group) that the user belongs has the following roles in msdb :
db_dtsadmin
db_dtsltuser
db_dtsoperator
SQLAgentOperatorRole
SQLAgentReaderRole
SQLAgentUserRole
i have made a proxy to sql server agent which has the following subsystems :
"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.
Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.
Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.
Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.
Hi
I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.
The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.
Any help welcome.
I have a simple parent package that calls 3 small simple child packages (child1, child2, and child3). Each child package does nothing but contains a FlatFile connection. I run these 3 child packages in parallel inside parent package. The parent package fails sometimes (i.e. sometimes success, but sometimes failed). And the failure is replicable.
I would like to send you all of 4 simplest packages via email if anyone is interested in helping out.
Here is the error info
Code Snippet
SSIS package "parent.dtsx" starting.
Executing ExecutePackageTask: C:SSISDasLoaderchlid3.dtsx
Executing ExecutePackageTask: C:SSISDasLoaderchld2.dtsx
Executing ExecutePackageTask: C:SSISDasLoaderchild1.dtsx
Error: 0xC0014005 at : The connection type "FLATFILE" specified for connection manager "_MedicalClaimServiceLine_070713_161742152820" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Error: 0xC0010018 at : Error loading value "<DTS:ConnectionManager xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="DelayValidation">0</DTS:Property><DTS:Property DTS:Name="ObjectName">_MedicalClaimServiceLine_070713_161742152820</DTS:Property><DTS:Property DTS:Name="DTSID">{CA12C" from node "DTS:ConnectionManager".
Error: 0xC00220DE at child2: Error 0xC0010014 while loading package file "C:SSISDasLoaderchld2.dtsx". One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.
.
Task failed: child2
Warning: 0x80019002 at parent: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Information: 0x40016042 at chlid3: The package is attempting to configure from the parent variable "z".
Information: 0x40016042 at child1: The package is attempting to configure from the parent variable "x".
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Hey,
I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.
If I'm running the package in 32-bit mode, I'm continuously getting the following error
"Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."
on one of the package's scripts --
the given links advises to install SP2... what a useless hint.
And if I switch the project to run in Run64BitRuntime=True , another script tasks complains
"ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
-- whatever that might mean...
Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.
Those effects are occuring since we put SP2 onto the server...
Any comments on this topic? Similar experiences? Maybe yet some solutions too?
Regards, Frank
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
Hi,
I have created a SSIS package and tested it in V.Stdio where it runs fine and uploads file on the remote server.
Now I have scheduled it to run as a job in SQL SERVER AGENT as JOB, but it fails when it comes to the upload task?
I am quite sure as it is something with FTP connection string or security, but can't figure it out.
I have simply added the IP/login/password in the connection manager for upload task.
Any help/ guidance would be great.
Thanks,
Ad
Since applying July 2007 Microsoft patches it was noted that we were not able to open the editor for the Script Task component in an SSIS package. We received an error dialog with text similar to 'Engine failed with unknown error. (Microsoft.VisualBasic.Vsa.Dt).' All other solutions provided in the forum did not resolve our issue. It was noted somewhere else that the OLE32.dll seemed to have been affected. We reregistered this file using the command 'regsvr32.exe ole32.dll' and suddenly we were able to get into the editor. I don't know why this fixed the issue, but it did for us in our environment. Good luck!
View 3 Replies View RelatedI have a SSIS package that transfers a couple of tables from one database to another database on the same server. It works fine in most of the machines we tested with. However on one of the customer machines, it consistently fails with the error message, The Return value was unknown. The process exit code was -1073741795. The step failed.
This package runs as a scheduled job on the sql agent. When i did a sql profiler to see what is going on, i noticed that the last step before the bulk insert, it gets the collation and the schema id of the 2 tables. My guess is, it compares these values from the source and destination databases and makes sure everything is ok before copying.
On a machine where this works, it goes ahead with the the next step which is the bulk insert itself. Whereas on the machines where it doesn't work, it stops right after this step. i.e. it does not even bother to call the 'bulk insert' api. Which makes me think it is doing some kind of validation with these values and it is getting something that is not expected.
If the collation or the schema was an issue, why throw an 'return value unknown' error? Can the error be more specific?
Any other possible reasons for such a behavior? Any clues?
Thanks
Gopal
Hi,
I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties:
Type: SQL Server Integration Services Package
Run As: SQL Agnet Service Account
Package Source: File System
Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
Thanks,
KD
Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?
Thanks.
I have a SSIS package that consists of 3 Script Tasks, two Data Flow Tasks. Each script tasks executes a FTP command. The first one renames the file, the second gets the renamed file and third resets it back to original name for testing.
When I run via BIDS or DTSExec all work fine. When I schedule it, only the first script runs. It never downloads the file.
Setup - SQL 2005 SP2, SSIS is running, 32 bit OS, SQL Agent Account is local admin. Package protection level is DontSaveSensitive. PrecompileScriptIntoBinaryCode = True
What am I missing??
Thanks
Mike Allen
Hey Folks,
I've got here a strange Problem. If I try to execute the SQL Server Agent Job, that executes my SSIS Package, it fails. The job succeedes when I run the Job as the Proxy, that maps on the User, that has deployed the Package, or when I run the Job under an System Administrator Proxy. Now my Question - how must I set up an Service-Account, which is no Admin and not has deployed the Package?
I already know, that the User has to be in the sysadmin role, and in all msdb SQLAgent*
Thanks and greez
Karsten
While executiing an SSIS package i get the follwoing error:
Executed as user: <User>. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-06 23:00:01.02 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:01 PM Elapsed: 0.859 seconds. The package execution failed. The step failed.
The SSIS package contains one "Execute DTS 2000 package" which is written in SQL server 2000. The DTS written in SQL server 2000 and then i made the SSIS package for the same to be executed as "Execute DTS 2000 package" BUt the package execution fails.
I have seen some workaround also for same where it was saying to install some dll files for SQL server 2000 Meta data services. SQL server 200 meta data services is required for running DTS packages in SQL server 2005 server.
I installed that also but still the same error.
I have done all but all in vain.
Your help will be very helpfull since this is the production issues.
Thanks,
Ashok
hi !
I was able to run the PAckage successfully under local server. but when i deployed to another server and tried to run it fails.
When i run through the command line in another server -
I also tried running under File system and through Agent
Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
It does not execute the pacakge itself
When i run the package from my machine it executes the pacakge but fails at the end saying
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
Any help!!
Thanks,
Jasmine
I am trying to execute an SSIS package from a client that contains an Analysis Services Processing Task in the package. The client that does not have SSIS and SSAS installed. We are getting an error
The task "Analysis Services Processing Task" cannot run on this edition of Integration Services. It requires a higher level edition. The same package runs from a server that has both SSIS and SSAS installed. Let me know if someone has come across the same problem.
Thanks
Hi,
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
cheers..
Hi,
I have a dts package migrated from sql server 2000 to sql server 2005 clustered server using migration wizard without any problem.
I have created a new job on sql server 2005 and one of the steps involves executing the SSIS package. It keeps failing with the error message "package execution failed". I have logged in here as a domain administrator (as also a local administrator).
I followed Article ID: 918760 but did not help.
I need this to be resolved asap.
Any quick help, much appreciated.
Thx
Murali
This has only started happening in the last two days
When we invoke our SSIS package from a web service it used to work fine but now gives the following error. the DLL name changes all the time. Any help would be appreciated
Code SnippetSystem.IO.FileNotFoundException: Could not find file 'C:WINDOWSTEMPvrjeaanf.dll'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.CSharp.CSharpCodeGenerator.FromFileBatch(CompilerParameters options, String[] fileNames)
at Microsoft.CSharp.CSharpCodeGenerator.FromSourceBatch(CompilerParameters options, String[] sources)
at Microsoft.CSharp.CSharpCodeGenerator.System.CodeDom.Compiler.ICodeCompiler.CompileAssemblyFromSourceBatch(CompilerParameters options, String[] sources)
at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromSource(CompilerParameters options, String[] sources)
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.FromMappings(XmlMapping[] mappings, Evidence evidence)
at System.Web.Services.Protocols.XmlReturn.GetInitializers(LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.XmlReturnWriter.GetInitializers(LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.MimeFormatter.GetInitializers(Type type, LogicalMethodInfo[] methodInfos)
at System.Web.Services.Protocols.HttpServerType..ctor(Type type)
at System.Web.Services.Protocols.HttpServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
I have an SSIS ETL Package that runs perfectly in debugger.
It is saved to the local SQL Server using "rely on server security".
The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.
The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.
I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.
Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!