Job Activity Monitor
Sep 10, 2007
Hi,
I have a problem with Job Activity Monitor.
I have a SSIS which copies data from a table to a flat file. The connection string of this file is variable and the file is reused if not exists and is created if exists.
When I run the SSIS manually from my microsoft visual studio it works properly. However, when I run this SSIS from the Job Activity Monitor, I get the following error:
Message
Executed as user: REDCAMadminsql2k5. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:41:10 AM Error: 2007-09-10 08:48:04.99 Code: 0xC020200E Source: Crear Historico Historico [1] Description: Cannot open the datafile "\srvnfileHISTORICOSCAJEROSOFI3210C01OFI3210C01_2007-7X.txt". End Error Error: 2007-09-10 08:48:04.99 Code: 0xC004701A Source: Crear Historico DTS.Pipeline Description: component "Historico" (1) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:41:10 AM Finished: 8:48:53 AM Elapsed: 462.234 seconds. The package execution failed. The step failed.
Any idea?
Thanks.
View 3 Replies
ADVERTISEMENT
Aug 19, 2015
If I'm on a remote machine, meaning a computer not in the WSFC cluster, and I open SSMS 2014, point it to a SQL Instance, and open activity monitor:
1. I get all the panes and charts except % Processor Time.
2. Then, if I authenticate to the cluster's domain by mapping a drive with valid domain credentials, I'm free to put performance counters in the Perfmon - - - but SQL Activity Monitor shuts down with“The Activity Monitor is unable to execute queries against server SQL-V01INSTANCE1..Activity monitor for this instance will be placed into a paused state.Use the context menu in the overview pane to resume the activity monitor.
Additional information: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))(Mscorlib)”
3. Of course, the Activity monitor can't be resumed via the context menu. Removing counters and closing the perfmon do not work. I dropped the mapped drive and rebooted the machine. That brought back 95% of the information in the Activity monitor.
4. Further experimentation showed that any mapping of drive shares present on the SQL Server to the computer running SSMS cut off functionality of the 'overview' pane in the remote machine's SQL Activity monitor -- the monitor that had been trying to watch the server offering the shares.
View 4 Replies
View Related
Apr 10, 2008
Is there a way to allow a user to run activity monitor without making that user system admin
View 9 Replies
View Related
Apr 23, 2008
Hi experts,
I just want to know how can i kill all the processes of a database
if the database have more than 100 connections.This is for the purpose of restoring a database.
RKNAIR
View 3 Replies
View Related
Apr 10, 2007
Is there a way to give access to non-admins on ACTIVITY MONITOR?
------------------------
I think, therefore I am - Rene Descartes
View 2 Replies
View Related
Oct 5, 2007
Hi All,
I want to analyze server (SQL 2005) activity at a specific time in the past. Unfortunately, there doesn't seem to be a log file reflecting the information in Activity Monitor. Knowing that the sysprocesses and syslocks tables feed Activity Monitor, I thought about doing a log analysis on the master transaction log, but I'm not sure that's possible.
Is there a (different) way to achieve this?
Or is there a better approach to identifying processes that cause performance bottleneck/deadlocks?
Any input would be appreciated.
Ken
View 4 Replies
View Related
Feb 6, 2007
Hi,
I've been using the Job Activity Monitor quite a lot and last night I installed Service Pack 1 for SQL Server 2005. I've noticed now that I only have a "Start Job at Step" option when I right-click a job. Whereas I used to have just Start Job or both Start Job and Start Job at Step options.
The problem is that Starting a Job at a Step, produces a modal dialog box which prevents further access to Job Activity Monitor until the job is complete.
Does anyone have any comments regarding this?
Thanks in advance,
Richard.
View 1 Replies
View Related
Apr 19, 2007
I'm hoping that someone has experienced this problem before and knows how to get round it.
The problem we are having is that we have a job that is scheduled to run at 4:00 am each morning, for the past 6 weeks it has done this with no problem. However, this morning it failed. we know it failed because it didn't produce the results it was supposed to. However the monitor said that the job had completed successfully. On examining the history of the job we found that the job was still running!!! When we tried to stop the job by right clicking and selecting the appropriate action. The action available to us was to start the job.
After arguing for a bit we decided to try and run the job again. We did this and found that the job running in the history screen terminated with an error and than ran and completed successfully.
Confused? So are we any ideas or solutions gratefully received
View 3 Replies
View Related
Apr 4, 2007
Hi!
I want to extract the same information as the Activity Monitor does with SQL in SQL Server 2000.
Have tried to use sp_who2 but I miss some important columns.
How do I do?
Thanks!
View 2 Replies
View Related
Oct 25, 2007
If you are in SQL Server Management console, go to Job Activity Monitor, there is an option 'View Refresh Settings'. You have to enable/check the Auto Refresh option here every time. Is it possible to keep this Auto Refresh enabled?
Thanks!
Olaf
View 6 Replies
View Related
Oct 15, 2014
I have a SSIS package set up that will transfer a file from a location on the network drive and transfer it over FTP to another location.
When I manually run the package, the file is transfer with no errors. But when the job is automated (via Job Activity Monitor) the transfer fails?
I have set the ProtectionLevel of the package to "EncryptSensitiveWithUserKey" and also converted the package to a Development Model. The settings for the FTP is saved within the package.
What am I missing? below is the error message
Executed as user: UHBInfoSQLAgent. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 08:43:02 Error: 2014-10-13 08:43:03.72
Code: 0xC001405F Source: ResearchWebsite
[Code] .....
View 2 Replies
View Related
Feb 22, 2015
We have killed a job which is now in KILLEDROLL BACK state. Job activity monitor is not showing any running jobs but I can see the SPID of that job. When tried to kill again its giving the message ‘command completed successfully‘, not able to get the percentage or time for the roll back to complete.
Another DBA tried to create a snapshot and it was stuck and I believe it was because of this ROLLBACK as both were using same Database.
View 5 Replies
View Related
Jun 4, 2007
All;
We have a Windows App and Web App that share business objects which points to a single database. When a Windows user logs in, an average of 50 processes are created in the first few seconds and never go away. The details window is blank and they all remain sleeping from that point on.
I have stepped through the code to see if there is anything odd going on but most of the processes are created when validating the number of parameters the stored procedure has or the length of the stored procedure name. This translates to 1000-1500 processes on average.
Is this normal? Will it hurt performance? Is there a way to remove them?
View 1 Replies
View Related
Apr 23, 2013
When I try to open Activity Monitor from SSMS I receive the message "Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)". - more details below.
I have a SQL Server 2012 Enterprise SP1 installed in an Active/Passive cluster configuration on Windows 2008 R2 Enterprise SP1. The problem happens using sa and a domain administrator.
------- more details -------
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) (mscorlib)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
[Code] .....
View 5 Replies
View Related
Apr 14, 2015
Is there anywhere in the SSMS to see the start time of a currently running job, currently running it's first step, without needing to run a query?
If not, why would Microsoft decide to not show it in the job activity monitor?
SSMS = Sql Server Management Studio
View 1 Replies
View Related
May 18, 2007
The activity monitor is not showing entries for hosts which connect via sql logins (odbc), is this normal? Where can I find a list of protocols in which the hostname/ip can be picked up. We're on SQL 2005 SP1/Build 2153
Thanks
View 2 Replies
View Related
Sep 26, 2007
Hi
we have one 'application'-user in sysusers that makes the connect to SqlServer for all users, for example:
Application Login-User: Thomas
DB-Connect-User: AppUser
With this solution, in Activity-Monitor or with sp_who I don't know, what is the real name of the connected user.
Any possibility to change the login-information after the connect, so that i can see 'Thomas' in Activity-Monitor or with sp_who?
Thanks for your help.
Thomas
View 4 Replies
View Related
May 28, 2015
Is there a way to permanently change the order of the columns in Job Activity Monitor?
I'd like to move Duration to the right of Step Name, but this only lasts so long as I have JAM open. Once I close it and re-open, JAM goes back to its default column order. Google gives me nothing but the temporary "drag and drop" method that I already know about.
View 2 Replies
View Related
May 16, 2007
Please forgive the simplicity of this question - I am not the dba type. When I connect to a server and look at my connection attributes in activity monitor, the user column shows the correct information for my domainusername. When I run a certain stored procedure in that connection, the domainusername changes to another person. We are not using execute as, setuser, or anything special to explicitly change the user. The stored procedure is in a schema that is owned by dbo (principal_id = 1 - I verified by checking sys.database_principals.)
Does anyone have any suggestions?
Thanks in advance,
John Hennesey
View 4 Replies
View Related
Sep 27, 2006
For SQL Server 2000 we have a user login mapped to msdb with database role membership of db_datareader and public checked. This seems to allow the developers to view the Management Activity monitor. For SQL Server 2005 the same mapping is in place but the developers cannot view the Management Activity monitor. Developers are NOT granted the sysadmin role, and should not have that role.
What permissions need to be set for SQL Server 2005 to allow users to view the Management Activity monitor? They should not be allowed to take actions on the activities.
View 13 Replies
View Related
Mar 14, 2007
Hi,
We have development and user acceptance (UA) servers. When I start a job on the development server, on the management studio, Start Jobs window and Job activity windows indicate "Executing" until the end of the job and finish with "success" or "failure"
But on the UA server, second after I start a job, Start Jobs window comes up with "success" or failure" and Job activity monitor says "idle" but Job continues to log without any error message and updates the tables. So these two windows are not reliable at all. I have to add that I have only job operator rights on the UA server.
Does anybody know what the reason is ?
Thanks
View 5 Replies
View Related
Jan 30, 2007
I have setup transactional replication everything on one box. later(two or three weeks later), Replication monitor is show red X Under my publishers (publications is disconnected). this is SQL2005.
Everyone known how to fix this problem?
Thanks,
Frank
View 1 Replies
View Related
Nov 9, 1999
What is the best to produce user activity log ? Using triggers (insert, delete, update) is rather heavy (?) operation. Has anyone used SQL Profiler for that ? In log should be: who, what, when, workstation, table, changed fields, some data key values.
Harri
View 1 Replies
View Related
Dec 3, 2007
Dear friends,
I'm working on an entity relationship diagram about a mice farm.
Let's say we have a very very basic diagram like this:
MOUSE "is in" CAGE
For example, this gives
Mouse "n1500" is in cage "AAA"
Mouse "n1501" is in cage "BBB"
One operator can take one mouse and put it into another cage, for
example the first line becomes
Mouse n1500 is in cage CCC
Now, I was asked to track any movement... I ask myself: do I need to
add
OPERATOR "moves" MOUSE
so that I have
Operator "John" moves Mouse "n1500" on "Monday 3rd, 2007" at "5 PM"
from "AAA" to "CCC"?
or this kind of logging is provided some way by SQL server?
Thanx a lot for any hint.
View 1 Replies
View Related
Apr 17, 2000
I have registered a server on to my client machine successfully,but I am not finding the current activity item in the management folder on EM.How do I see the current activity on the server.Do I need to be SA for that server?My machine has NT workstation with SQL server 7.0 on it.Any one to help?
View 1 Replies
View Related
Aug 12, 1999
When viewing Current Activity, nothing shows up.
If i run sp_who, the return is normal.
If I run sp_who2, the following message is returned. (it also is returned randomly while using function in EM such as Backup/Restore.)
Msg 268, Level 16, State 1
You cannot run SELECT INTO in this database. The DBO would have to run sp_dboption to enable this option.
What is it??? It's buggin me......
Dano
p.s. I remember a similar problem in the past, it had to do with turning truncate on checkpoint in one of the system databases msdb/master/tempdb or something like that. I turned off all Trunc. and Select/Bulk options on these...
View 2 Replies
View Related
Oct 27, 2005
I have a requirment to create a activity log to log all changes that
take place in my tables as they happen. All my Inserts,updates & Deletes take place inside stored procs. A windows .NET application calls the stored procs and passes the data set to the stored procs to execute them on a Sql server 2000 database.
When an update statement is run inside my stored proc, the dataset only passes me the new values. but,i will need the old value from the database before the update takes place to report in my activity log. What is the best way to do it ?
My activity log shold report a description like this
"Name Changed from 'Robert Johnson'(old value) to 'Bob Johnson'(New Value)"
Though i can do a select from the tables to get the old values and match the new values to get the differences before running the update statements, it is too much work as i have well over 100 stored procs in my application and i have to check for every single field value in a table. If only one column changed in a table containg 20 columns, i would still have to check for 20 columns before determining which fields changed.
Can any one suggest me a better solution to report the old values and new values for all the updates that take place in a database through stored Procedures.
Thanks
Reo
View 1 Replies
View Related
Jun 5, 2008
I usually run this command in SQL 2000.
Which tells me what is running with all the sql code statements.
Is there an alternative command to run in SQL 2005...rather than using the Reports - i find it easier to execute sp i called this sp_now.
set nocount on
declare @handle binary(20),
@spid smallint,
@rowcnt smallint,
@output varchar(500)
declare ActiveSpids CURSOR FOR
select sql_handle, spid
from sysprocesses
where sql_handle <> 0x0000000000000000000000000000000000000000
--and spid <> @@SPID
order by cpu desc
OPEN ActiveSpids
FETCH NEXT FROM ActiveSpids
INTO @handle,
@spid
set @rowcnt = @@CURSOR_ROWS
print '===================='
print '= CURRENT ACTIVITY ='
print '===================='
print ' '
set @output = 'ACTIVE SPIDS: ' + convert(varchar(4),@rowcnt)
print @output
WHILE (@@FETCH_STATUS = 0)
BEGIN
print ' '
print ' '
print 'O' + replicate('x',120) + 'O'
print 'O' + replicate('x',120) + 'O'
print ' '
print ' '
print ' '
select 'loginame' = left(loginame, 30),
'hostname' = left(hostname,30),
'datagbase' = left(db_name(dbid),30),
'spid' = str(spid,4,0),
'block' = str(blocked,5,0),
'phys_io' = str(physical_io,8,0),
'cpu(mm:ss)' = str((cpu/1000/60),6) + ':' + case when left((str(((cpu/1000) % 60),2)),1) = ' ' then stuff(str(((cpu/1000) % 60),2),1,1,'0') else str(((cpu/1000) % 60),2) END ,
'mem(MB)' = str((convert(float,memusage) * 8192.0 / 1024.0 / 1024.0),8,2),
'program_name' = left(program_name,50),
'command' = cmd,
'lastwaittype' = left(lastwaittype,15),
'login_time' = convert(char(19),login_time,120),
'last_batch' = convert(char(19),last_batch,120),
'status' = left(status, 10),
'nt_username' = left(nt_username,20)
from master..sysprocesses
where spid = @spid
print ' '
print ' '
-- Dump the inputbuffer to get an idea of what the spid is doing
dbcc inputbuffer(@spid)
print ' '
print ' '
-- Use the built-in function to show the exact SQL that the spid is running
select * from ::fn_get_sql(@handle)
FETCH NEXT FROM ActiveSpids
INTO @handle,
@spid
END
close ActiveSpids
deallocate ActiveSpids
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
View 5 Replies
View Related
Oct 6, 2005
Hello All,
I am new at this site and new at using SQL also.... I was wondering if anyone could help me out with my prob...
I have set up an SQL 2000 server and made some accounts which my friends are using to log onto my server.. Is there a way I could keep a check on who is doin what or maintain a user log....
Many Thanks,
View 1 Replies
View Related
Feb 13, 2008
How to find a last activity happened on a table?
View 10 Replies
View Related
Aug 2, 2001
Hello,
Can anyone guide me besides any third party tool is there a way to find out all the activities of the connection till it got connected.
Thanks
Sejal
View 2 Replies
View Related
Dec 6, 2001
Hello,
A developer is running sql transactions from the application and needs to know how it is executed from database, I know I have to run Profiler Trace, but not exactly which traces , Can you please guide me?
Thanks
Malika
View 1 Replies
View Related
Dec 22, 1999
Hello,
Does anybody know how to trace user activity after they log off from the SQL Server 6.5? I know SQL Trace is able to trace the user activity in real time.
Many thanks in advance!
View 2 Replies
View Related
