Hi!
I had configured SQL Agent and SQL Mail to use the profile that I created by logging in as the SQL Agent domain admin. service account. The mail service was successfully working. Now, when I create an operator with my mail account and test it, Agent gives the message that the mail was successfully sent, but I don't actually receive any mail.
Why could this happen? How can it be fixed?
Praveena
Hi,
I have scheduled a job that runs every minute.
If the job does not succeed, then I would like my front end application to be notified.
I am not sure if this is a reasonable way but I am thinking of somehow
populating a table (Only if the scheduled job fails) in sql server and then read that table every minute from the front end application.
So, is it possible to populate a table if a job fails?
I do not see any options for this in the properties of the job.
Thanks
Hi All,
Can some one suggest me some good ways to notify immediately to about the failure of the jobs set on SQL Server.
What is a good way of notifying and how we can accomplish this.
How do we set up pagers are black berrys on sql server to sent out an email.
Thanks for any ideas
Venu
Good afternoon one and all,
I have numerous jobs running on my SQL Server machine. Due to the fact that my company will not sanction an e-mail account for a machine (damn them!!) I have no way of knowing (quickly) whether a Job has failed. Does anyone hae any suggestions on how I can create a file or SQL table that is updated every time a job fails? (writing to NT application log is not an option beacause Operations refuse to trawl thru it).
TIA for any and all help
Gurmi
We have an application comprising of a number of SSIS packages that run every few hours. When a package fails, we would like an email to be sent to a pre-configured address with the required information.
I would like to use Send Mail task with SMTP server like smtp.sbcglobal.yahoo.com, but this server requires authentication and I need to provide my user_id and password for that. I have not been able to figure out where I can configure user_id and password for getting authenticated by the SMTP server.
If SMTP connection cannot be used, is there any other way to notify admin of the failure?
Thank you in advance for your help.
Alok
I tried using Query Notification on my computer at home:
* Win XP Pro with all the SPs and hotfixes
* SQL 2005 with SP1 qand hotfix
Query Notification worked fine.
Then I tried using it at work:
* Win XP Pro with all the SPs and hotfixes
* SQL 2005 with SP1 qand hotfix
and I see the following error in the SQL server log file and notification does not get to the client app:
----------------------------------------------------------
Date 9/1/2006 10:18:30 AM
Log SQL Server (Current - 9/1/2006 10:18:00 AM)
Source spid17s
Message
An
exception occurred while enqueueing a message in the target queue.
Error: 15404, State: 19. Could not obtain information about Windows NT
group/user 'domainmyuser', error code 0x6e.
----------------------------------------------------------
A similar error shows up in the machine's Event Log.
I am
sysadmin and full OS admin on both boxes. The difference is that the
computer at home is standalone while the one at work is part of a
domain.
What could be wrong?
More of a general SOAP service call question.
Does anybody have any experience/advice on how to ensure that SOAP service call success/failures are returned to the calling app?
Consider a client that calls a SOAP service during which the client goes down and is unable to receive the SOAP response, the work having been done by the service. Similarly, the SOAP service may perform the task but a failure in the return makes the client think the process failed.
What would be the best way to ensure that the client is notified to avoid the call having to be made again?
Are there middleware tools that can be used to provide a form of message queuing for SOAP service calls?
Thanks
Hi all,
I am using ODBC to connect SQL Server 2000 + SP4 server runnig on Windows 2003 standard edition Server +SP1. But, sporadically my application server connectivity to DB fails and i receive the following error messages
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (WrapperWrite()).
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.) In D:de.cpp 702 Apr 12 2006 20:34:47
[Microsoft][ODBC SQL Server Driver]Communication link failure) In D:de.cpp 702 Apr 12 2006 20:34:47
20071017 08:23:10 TID (00000ff0) Sev (3) Err (0) Msg (Read failure.
General SQL error.
Strange thing is that i receive this error only sporadically, Please Please advice !
Thanks ,
Jitender
Morning all!
My SQL server email job notifications have stopped working, but mails sent through the xp_sendmail command still work.
The only thing that has changed recently is the SQL server agent account passwords have been changed, these accounts are normal win2000 domain accounts.
Any ideas cos I am fully stumped?
Is it possible to set up a Job to send a notification , if a process is blocked for more than a minute on SQL Server 2000.
Thanks for any help on this
I wish to know if there is anyway to find out if a perticular job on SQL Agent was executed or not. I am not looking for Log History of the job, but, something like a trigger that will fire an email to notify that a perticular job that was scheduled to run at a certain time did not run.
To explain in detail, I have a job that is scheduled to run every 15 min. This job is crutial and I wish to be notified if the job was not run for some reason or other. I already have a program that delivers me the history log of the job each day, but, checking history to see if the job ran or not every 15 min is not possible. Again, I am not talking about the job success or failure, but the fact that the job has run or not - thats it !
If you are suggesting a SMO object, I will appriciate if you provide me with the code or alternatively a source to refer.
Thank you.
hi all i have found for function as function: SubscriptionEnumeration in API of notification service, i want display myAlert(notifications) in(for example: one day).the Function SubscriptionEnumeration display Subscription of (subscriberId,subscriptionType,nsApplication) it can be made this ?thanksHungN
View 1 Replies View RelatedHi,
I want to build sql notification service in my web application and i not know how to build it. Please help me how it possible and any sample code then pls send me else give me link of website. Its very urgent for me, now i am using timer for checking for updation in database and i want to notification service for that because its take many time and timer fire every time even database change or not.
Jaydev Jangid
hi,
An application, every one hour it connects to sqlserver and uploads data from MSAccess database.i should get the notification weather that application is connected to the server or not.because this application gets currepts very often.
any help is appreciated.
thanks
preethi
Does anyone know how I can receive some type of notification (an alert) that fires when a new database is created (or an old one deleted) on a server?
Thanks.
I have set up SQL Mail on a SQL 7.0 box and I can successfully schedule tasks and receive e-mails from them. However, when I try to get mail notification from a scheduled DTS package I run into problems and no mail is sent. Under Profile Name the only item selectable is Microsoft Outlook. I've tried selecting this as well as leaving the profile blank and nothing seems to work. We use POP3 server and Microsoft Messaging. Our corporate e-mail system is Notes so we forward mail through the POP3 server via Internet mail to our Lotus Notes system.
Any suggestions so that we could get our DTS mail notification working? Anything I could try that I haven't?
Thanks!
Does anyone know if there is any software available that notifies specified people when an error above a certian level occurs. Im thinking along the lines of email and text message.
Im running sql server 2k at sp3a level, and the software will have to be compatible with it so as to get the event notification to pass the information on.
If there isn't any software, would anyone know of any scripts that will do this?
MSDE 2000? Thanks.
View 2 Replies View RelatedCan you send these to a group of DBA's
View 1 Replies View RelatedHow can I set up the notification email when one of your jobs got failed using Database mail..
I've already set up the database mail ... but I am not quite sure how to use the database mail to send a notification when a job failed...
Dear all,
I would like to know, is there any method that the notification can be send more than one person? (SQL server agent--> Job Properties--> Notification--> email)
The dropdownbox list allow one email only, can I add more people on the email list, or insert more email address in the same operator?
Thanks to all
johnson Mok
Hi,
Can anyone tell me abt SQL Notification Service ???
Is that SQL Programming application or can be implemented with other Dot Net Languagues ???
Need to know further that this services are implemented only by the Database Engineers or integrated with the Application development using .Net Language like C# etc ????
I m n urgent need for this problem
Thanks in advance
Regards
Aravind
Hi all,I wanted SQL server to sent me an email when it reboots. I created an Alertbut doesn't seem to be working. Any suggestions.Thanks,
View 1 Replies View RelatedIs there any way to configure a notification icon in the start tray in Express 2005 (like we had in SQL Server 2000) with a little green (or red) arrow (or dot) to indicate whether the server's up (or down)?
View 3 Replies View Relatedi have a scheduled ssis package and because it's pretty critical i have to do a lot of error handling. inside the package all possible errors are handeld but now i have the question if there's a way to check whether a scheduled sql server job was started successfully or not. because if the job doesn't start i cannot get an error notification from inside the ssis package. in sql server management studio there's the possibility to send a notification if a job fails, but i don't know if this also includes the case when the job doesn't start at all.
View 4 Replies View Relatedhi i am getting the error for granting
GRANT SUBSCRIBE QUERY NOTIFICATIONS TO sa
error is
Cannot find the user 'sa', because it does not exist or you do not have permission.
SO PLEASE GIVE ME THE CODING
step by step for notification
thanks
Hello,
I have a problem with the notification. I have enabled Database mail and i have created an Operator.
Under SQL Server AgentJobs and then in the job properties i have enabled notification but i don`t receive a mail. Test e-mail works fine but "real" e-mail not.
I have also tried with the Database Maintenance Wizard but even then it just not work.
I have noticed that others have experienced the same problem but i have seen no solution yet.
Could you please help me? What can cause this problem? What`s the best i can do to start searching for the solution? Thanks!
I need to set up an automatic email notification. Right now, I have a subscription that is working. The subscription runs a report and puts the resulting pdf into a folder. I need a way to notify users (preferrably in an Outlook distribution list) when the pdf is created. I'm amazed that this basic feature is not built into the subscription capabilities.
Can anyone please tell me how to best accomplish this? I'm familiar with vb.net if that helps.
Thank you very much.
i've scheduled a few ssis packages as sql server agent jobs. is there a way to get a daily notification via mail where all planned and all processed jobs are listed?
View 5 Replies View Related
Hi, looking for some help on job notification emails in SQL 2005.
I've created a backup job in the Maintenance Plan section of SQL2005, and added a "Notify Operator" task to notify me when the job completes.
I've setup Database Mail, and I am getting the notification email whenever I run the job. So this is working fine.
The problem is when I got to the 'Jobs' folder, and into the properties of my backup job, I set it up to notify me from the notifications option, but I am not getting any emails. For now I have set it to notify me when the job "succeeds".
Any ideas why it works from the Maintenance Plan section, but not the "Jobs" notification section? Am I forgetting something?
I have recently migrated a SQL2000 instance to SQL2005, and would now like to setup all the existing jobs to notify me if they fail.
Any advice would be helpful
Thanks
hi,
When SQL server notifies the application that the records in a table has changed, is there a way to know which record has changed from the application?
Let me give an eg.
Consider that we have a table customer. We have registered for a notfication for 2 customers, say Cust id 1 and Cust id 2. Now , when records for these two customers changes we get a notification. Is there a way in .Net by whihc we can get whihc customer has been modified?
Thanks
Man.
I am replicating using SQL Server 2000.
I have several merge agents which periodically fail due to locking contention. This is not a problem. The agent just runs again and is almost always successful, eventually.
I need a way to be alerted when the merge agent has failed three times consecutively.
Is there a way to do this?
hi to all,
my question is how can the database notify the user if there is a new inserted data on the database...like for example, i inserted a new data then when i go to the display reports page i would see a link saying New Report Recieved and this will take me to the details of the new inserted data or the report sent by another user..is this doable?? and by the way im using asp.net 2.0 and a sql database...thx...