I have been trying to open a job properties and then step where its executing sql server 2005 integration services package and when I try to look at the configuration of that package in the job step properties window it asks for the password used to secure the package configuration and even on entering right password its not accpted. Is it a bug or what?
View 2 Replies
Measurement min ave max
% Disk Time (PhysicalDisk _Total): 0.053 1.863 63.109
% Processor Time (Processor _Total): 0.0 37.543 98.84
Average Latch Wait Time (ms) (SQLServer|Latches): 0.0 1.537 16
Average Wait Time (ms) (SQLServer|Locks _Total): 0.0 0.193 16
Current Disk Queue Length (PhysicalDisk _Total): 0.0 0.365 67
Log Growths (SQLServer|Databases _Total): 0.0 0.0 0.0
Page Faults/sec (Memory): 9.206 172.064 8612.257
Pages/sec (Memory): 0.0 7.313 815.411
Pool Nonpaged Bytes (Memory): 38195200 38352765.277 38547456
Private Bytes (Process _Total): 1516933120 1663239600.632 1785290752
Processor Queue Length (System): 0.0 0.489 17
Threads (Objects): 922 938.353 950
can anyone tell me what is the accepted value for performance on sql server 2005
this report is generated from mercury load runner
just trying to run the install and cant get passed the service account page as unsure of the details.
im using the Clustered Instance lab/guide where it says that the account details are as follows:
SQL2K8WKSSQL2K8R2SVC for database agent
SQL2K8WKSSQLAgent2K8R2SVC for agent
but get errors when use these.
Hi,
I tried to use the RETURN_VALUE of a stored procedure in updata / delete commands with a sql-datasource and a stored procedure.
The thing works fine with the insert command.But it fails with "too many arguments..." in delete / update.
I also tried to handle the updating event like this:
protected void sqldsReportSelect_Updating(object sender, SqlDataSourceCommandEventArgs e) { SqlParameter sqP = new SqlParameter("RETURN_VALUE", SqlDbType.Int); sqP.Direction = ParameterDirection.ReturnValue; e.Command.Parameters.Add(sqP);}
It brings the same error.
Do I make something wrong or is this a bug?
Regards
Manfred
I'm a relative newbie to ASP.NET development (web development in general) so please forgive the ignorance. ;-)
Ok, I'm using VWD to design and test my application and I'm using the standard membership provider system. I've read in various places not to muck around with the aspnet_* tables as it can cause havoc hehe. Therefore, I've created my own Member table to accommodate more fields that the aspnet_Users table does not have (since I don't want to mess around with that table) such as address, city, town, zip, birth date, etc. Obviously, I have a field in Member that corresponds to the userId primary key in aspnet_Users. Now, there are times when I need to display the username of a person's profile on a page.
SELECT aspnet_Users.UserName<br>FROM aspnet_Users, Member<br>WHERE querystringid=Member.memberId AND Member.userId = aspnet_Users.UserId
Now, this seems fine and dandy when there are few entries in the aspnet_Users table, but what if I tried that query when aspnet_Users grew to a hypothetical one million entries?? Does anyone know if those fields in aspnet_Users are properly indexed? I can't seem to determine one way or another with VWD's database explorer. I don't want to run the risk of a full table scan. But if those fields aren't indexed, I don't know if I should modify that table in any way.
What to do?
TIA
I have 2 tables:
tbl1: InstituteID, name
tbl2 ApplicantID, InstituteID ,Applicant_Name, address, city, state, status *
* Status field contains value A for acceptance or R for rejected
listing Institute names where more than half of applicants were accepted.
I'm using an ObjectDataSource in Visual Studio to retrieve records from a SQL Server 2005 database.
I have a very simple dilemma. In a table I have fields FirstName, Surname, Address1, Address2, Address3 etc. None of these are mandatory fields.
It is quite common for the user not to enter data in Address2, Address3, so the values are <null> in the SQL table.
In Visual Studio 2005 I have an aspx form where users can pass search parameters to the ObjectDataSource and the results are returned according to the passed in parameters.
The WHERE clause in my Table Adapter is:WHERE (Address1 LIKE @Address1 + '%') AND (Address2 LIKE @Address2 + '%') AND (Address3 LIKE @Address3 + '%') AND (FirstName LIKE @FirstName + '%') AND (Surname LIKE @Surname + '%')
If, for example, I simply want to search WHERE FirstName LIKE ‘R’, this does not return any results if the value of Address3 is <null>
My query is this: Could someone please show me the best way in Visual Studio 2005 to return records even if one of the Address fields is <null>.
For reference, I have tried: Address3 LIKE @Address3 + '%' OR IS NULLThis does work, however itsimply returns every instance where Address3 is <null> (accounting for about 95% of the records in the database). Thanks in advance Simon
I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.
View 3 Replies View RelatedI have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.
I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.
This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..
The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E
and I get
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF
although the same code executes perfectly from a command prompt.
Please does anyone have any experience with a similar problem and if so, how did you get round it?
Thank you
I am receiving the following error message when attempting to create a new SQL Authenticated login id.
Password validation failed. The password does not meet the requirements of the password filter DLL. (Microsoft SQL Server, Error: 15119)
I have four servers all running SQL Server 2005 SP2 on Windows 2003 Ent. SP1. Of the four servers, only one received the above error message using the same TSQL below.
CREATE LOGIN TEST_LOGIN WITH PASSWORD = 'pvif9dal' MUST_CHANGE, CHECK_EXPIRATION = ON
All four servers are in the same domain, which if I understand correctly, the password policies are therefore inherited at the OS level by the domain. The password being used is within the password policies of the domain.
Any ideas as to a root cause?
I tried to install an ALLDATA database which run with SQL Server 2005 express edition. The data base fails to install becase of the following code that come up which is related to AS password requirement. The error that come up is:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The sa password must meet SQL Server password policy requirements. For strong password guidelines, see Authentication Mode, in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=28001&EvtType=sqlca%5csqlcax.cpp%40SAPasswordPolicyCheck%40SAPasswordPolicyCheck%40x6d61
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
I am trying to install this database in a network server operating under Windows Server 2003 R2 with SP2. If anyone knows how to solve this problem, please let me.
Thanks,
Amilcar
On the login prompt for Report Server, there is a checkbox option to "Remember my Password." I check this, login successfully... but when returning to the Report Server, I am again prompted for the password, although the user name is saved. No matter how many times I do this, the password will not save in IE7. I have tried this on 3 different computers with IE7. In IE 6, I do not even get the checkbox as an option, just the user name/password prompt. In Firefox, the password saves fine. Any ideas what would be causing this?
Thanks,
Brian
I put this together to export the user name /password to a csv file to test my SP to output the user name/password.
DECLARE @user_name varchar(50)
DECLARE @psswrd varchar(10)
SELECT @user_name ,@psswrd
FROM ngweb_bulk_enrollments
EXEC master.dbo.xp_cmdshell 'bcp NGDevl.dbo.ngweb_bulk_enrollments out C: est.csv -Sserver1 -T -t, -r
-c'
This works but I don't get the headers in the file. How can I include the headers?
I have an internal Project Management and Scheduling app that I wrote internally for my company. It was written to use MySQL running on a Debian server, but I am going to move it to SQL Server 2000 and integrate it with our Accounting software. The part I am having trouble with is the user login portion. I previously used this:
PHP Code:
$sql = "SELECT * FROM users WHERE username = "$username" AND user_password = password("$password")";
Apparently the password() function is not available when accessing SQL Server via ODBC. Is there an equivalent function I could use isntead so the passwords arent plaintext in the database? I only have 15 people using the system so a blank pwd reset wouldn't be too much trouble.
I am building a website in Dreamweaver. I have tried and tried to get a connection to SQL 2005. Everything works on the web except the stuff that requires the use of my SQL tables. With OPEN_Conn ="Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=master" I get an error at the bottom of my page saying this:
Microsoft OLE DB Provider for SQL Server error '80004005'
Invalid authorization specification
When I add a password and ID to the string the pages become very slow and I get this error:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Using windows authentication when logging into SQL Server doesn't have a user id or password so maybe I just don't know what to put there. I have tried a mix of all the passwords and ID's I use on this computer. Do I even have to have the user ID and password and if not how do I fix the first error? All help appreciated.
Hi All.
Have a nice day.
in my project asp.net web.config file has
<connectionStrings> <add name="MyDbConn" connectionString="Data Source=NAVEEDSQLEXPRESS;Initial Catalog=QADB_2005;Persist Security
Info=True;User ID=db1;Password=12345;" providerName="System.Data.SqlClient" /> </connectionStrings>
I want to change password of database, how can i change. please can you assist.
Thanks.
Zahyea.
Hello ,
Is is correct that the 'sa ' passoword is stored in one of the files of the SQL Server and is easily readable if the location of the file is known ?
If not , then is the password encrypted when i try to connect to the SQL server on the Internet ?
Thanks.
Sameer.
I am designing a DTS package which i need to update every so often to change the name of the source file(it's a text import). Every time that i change this, then click save, the DTS job begins to fail, with password errors. I put the password back in correctly( i still don't know why it gets lost in the first place), and click save - same result. this is getting tremendously frustrating, so i really appreciate any answers.
View 3 Replies View RelatedI will like to Change the SA Password, Do i have to go thru all the DTS packages and Jobs to change it too?
Thanks
I need to get a password out of SQLServer 6.5. The account is a user account. I need to get the password so that I can create a development database. The DBA's that know the password have left the company, and I can not just change the password. Please HELP!!!
View 1 Replies View RelatedRecently my husband has taken the position of IS Manager for a major hotel Firm.
The IS Manager that was there before him had a SQL Server which held some of the hotels data.
He did not leave the SA password. How do you find out what the SA password is
if you do not have it? I do not know what to tell him. Does anyone out there
have any idea what he can do?
Thanks in advance for your help.
Dianne
Can someone tell me if there is a password in Entereprise manager.
I've been having trouble with Scheduled tasks.
There are not running anymore.
THANK YOU.
Hi!
When I try to set password for any login begining from 'sa' using Enterpr. Manager or sp_password I get error message:
'Server: Msg 552, Level 16, State 1, Procedure sp_password, Line 63
CryptoAPI function 'CryptAcquireContext' failed. Error 0x80090006: Invalid Signature.'
What does it mean?
Thank you,
Elena.
Is there anyway to "get in the backdoor" if you have installed SQLserver and assigned sa a password (no other users are set up with admin rights) and then forget what the password is.
In the online doc it says you have to reinstall SQL server....isn't there any other way to get in??? For instance in SYBASE you can log on to the console and "go thru the backdoor" and issue a command from there.
Please advise.
I will like to Change the SA Password, Do i have to go thru all the DTS packages and Jobs to change it too?
Thanks
How do i get a password from the master database for a sql user account?
Someone created a password for a sql account and forgot what it was...
All
I can not change the 'sa' password, it's give me the error attached.
What can I do?
Thks
I can not change the 'sa' password. It's showing the error below:
<<Error 21776: [SQL-DMO The name 'dbo' was not found in the Users collection. If the name is a qualified name, use [] to separate various parts of the name, and try again.>>
What can i do?
Thks
I have a DTS saved as a structered storage file.How can I provide SQL SERVER Logon ID and password for this DTS package and call it within a SP through the LOGON ID and Password?
View 1 Replies View RelatedHi,
Is there any way to show one column(password) values as ***.
One of my table has password field, when you query the table it will give actual value, i wanted to show them as **** or with junk charecters.
FYI..column data type is varchar(50).
Thanks in advance.
Is there a way on a databse that the a password field is encrypted and no one can see what it is. I have loooked under dadt types and cant see it
View 1 Replies View RelatedDear Friends,
for one of my personal application, i forgot password, and after request, the admin send the pass word as " *2S}_P|!Krpa8P " how can i decrypt this with sql query?
thank you very much
Vinod
Hi,
I am new to SSIS.I need to run FTP process which is done manually currently.
We have different vendors uploading files @client FTP.
we have to copy the files from FTP to prod server & send mail to DBA.
The FTP has passwords encrypted & each vendor has its own password.
How do I go about doing it.
Please also suggest good article for FTP.