I need to update a field on a SQL Server table.
I load a foxpro table and then I need to look on a SQL Server table for a match, once I find a record match I need to update a field on the SQL Server table.
I do not want to upload records!.
Can anybody route me to a good example or feedback to accomplish it.
Thanks,
Sergio
Hello Friends,
I have two tables, And also I have Sample data in them.
create table X
(y int,
m int,
v int)
insert into X select 2007,1,5
insert into X select 2007,1,3
insert into X select 2007,2,9
insert into X select 2007,2,1
select * from X
Create table Y
(fy int,
fm int,
v int)
insert into Y select 2007,1,0
insert into Y select 2007,2,0
insert into Y select 2007,3,0
select * from X
select * from Y
I want to update the Table Y with the Sum of the Fields V from X based on the Criteria Y.fy = X.y and Y.fm = X.m
Using temporary table cannot be done.
Thanks in Advance,
Babz
I have a daily record table (has field Date1, field2Update) and have another table(has field Date2, Flag (value: 0 and non 0 values)
I want to update table1 and set field2Update as somevalue where table2.Flag <> 0
I have two tables STUDENTS and REGISTRATIONS. I wish to update mySTUDENT table field, LAST_ATTENDED_SESSION_ID from my REGISTRATIONtable of the max SESSION_ID found in the REGISTRATION table.STUDENT starts off with:STUDENT_ID LAST_ATTENDED_SESSION_ID123456789 000000234567890 000000345678901 000000REGISTRATIONS:STUDENT_ID SESSION_ID CLASS_ID123456789 200001 BUS100123456789 200102 BUS150123456789 200203 BUS160I want to update my STUDENT.LAST_ATTENDED_SESSION_ID with theMAX(SESSION_ID) found in REGISTRATIONS for each student.I'd end up with:STUDENT_ID LAST_ATTENDED_SESSION_ID123456789 200203234567890 000000345678901 000000I've found examples here about selects and sub-queries, but nothingyet in my situation with an update.TIARob
View 2 Replies View RelatedHi all, sorry if this is the wrong place to put this.I have two tables, both contain address info. I would like to updateaddress1, address2, city, state, zipcode and country. May be a fewother fields.The table I am comparing to has many duplicates. The linkage betweenthe two table is by ssn. However I have one field that is date stampedas to which is the most current.How do I get the last date stamped record and update the other table?update group1 setaddress1 = c.address1address2 = c.address2city = c.citystate = c.statezipcode = c.zipcodecountry = c.countryfrom main c, group1 gwhere g.ssn = c.ssn and max(lastchanged)I know the above does not work but it is what I am try to do. Cananyone help?TIA!!!!
View 2 Replies View Relatedhi e'body:
I have some database tables, and each one of them have a creation_date and modified_date in them. I was trying to figure out a way where when a row in one of these tables is changed using Enterprise Manager (Database -> Tables -> select table -> right click -> select all rows -> change a field in a row inside a table), is there a way apart from triggers, such that the "modified_date" column for that row get changed to 'getdate()' (rather picks up the current datetime).
thanks in advance.
I have a script that is supposed to run thru 2 joined tables and update a field in the 3rd table. The script works but takes approx. 4 hours to run against 250k records.
UPDATE a
SET Con_Mailings = STUFF((SELECT '; ' + c.ListName
FROM [server].[xxxxx_MSCRM].[dbo].ListBase c with (nowait)
INNER JOIN [server].[xxxxxx_MSCRM].[dbo].[ListMemberBase] b with (nowait)
ON b.ListID = c.ListID
WHERE b.EntityID = a.TmpContactID
FOR XML PATH('')),1,1,'')
FROM [xx_Temp].[dbo].[Lyris_CombinedTest] a
I should end up with something like this in the con_mailings field:
'Mailing1, Mailing2, Mailing3'
I have startdate and enddate. I like startdate to be 4/28/08 12:00:00 and enddate to be 5/4/08 23:59:59. What update statement do i need to run to update table. Currently my table show startdate 2008-04-28 05:00:00.000
enddate 2008-05-04 04:59:59.000.
I like to add a day to this date and also make time to 23:59:59. So end result for this table and recrods will be 2008-11-09 23:59:59 and next row 2008-11-16 23:59:59 so on.....
2008-11-08 23:00:00.000
2008-11-15 23:00:00.000
2008-11-22 23:00:00.000
2008-11-29 23:00:00.000
2008-12-06 23:00:00.000
2008-12-13 23:00:00.000
2008-12-20 23:00:00.000
2008-12-27 23:00:00.000
2009-01-03 23:00:00.000
2009-01-10 23:00:00.000
2009-01-17 23:00:00.000
2009-01-24 23:00:00.000
2009-01-31 23:00:00.000
2009-02-07 23:00:00.000
2009-02-14 23:00:00.000
2009-02-21 23:00:00.000
2009-02-28 23:00:00.000
2009-03-07 23:00:00.000
I have two table I like to change startdate time to 00:00:00.00 and Enddate time to 23:59:59.000
Table 1
ID Startdate Enddate
418 2008-04-28 05:00:00.000 2008-05-04 05:00:00.000
419 2008-05-05 05:00:00.000 2008-05-11 05:00:00.000
420 2008-05-12 05:00:00.000 2008-05-18 05:00:00.000
421 2008-05-19 05:00:00.000 2008-05-25 05:00:00.000
422 2008-05-26 05:00:00.000 2008-06-01 05:00:00.000
423 2008-06-02 05:00:00.000 2008-06-08 05:00:00.000
424 2008-06-09 05:00:00.000 2008-06-15 05:00:00.000
425 2008-06-16 05:00:00.000 2008-06-22 05:00:00.000
426 2008-06-23 05:00:00.000 2008-06-29 05:00:00.000
427 2008-06-30 05:00:00.000 2008-07-06 05:00:00.000
428 2008-07-07 05:00:00.000 2008-07-13 05:00:00.000
429 2008-07-14 05:00:00.000 2008-07-20 05:00:00.000
430 2008-07-21 05:00:00.000 2008-07-27 05:00:00.000
431 2008-07-28 05:00:00.000 2008-08-03 05:00:00.000
432 2008-08-04 05:00:00.000 2008-08-10 05:00:00.000
433 2008-08-11 05:00:00.000 2008-08-17 05:00:00.000
434 2008-08-18 05:00:00.000 2008-08-24 05:00:00.000
435 2008-08-25 05:00:00.000 2008-08-31 05:00:00.000
Table 2
ID Startdate Enddate
445 2008-11-03 06:00:00.000 2008-11-09 06:00:00.000
446 2008-11-10 06:00:00.000 2008-11-16 06:00:00.000
447 2008-11-17 06:00:00.000 2008-11-23 06:00:00.000
448 2008-11-24 06:00:00.000 2008-11-30 06:00:00.000
449 2008-12-01 06:00:00.000 2008-12-07 06:00:00.000
450 2008-12-08 06:00:00.000 2008-12-14 06:00:00.000
451 2008-12-15 06:00:00.000 2008-12-21 06:00:00.000
452 2008-12-22 06:00:00.000 2008-12-28 06:00:00.000
453 2008-12-29 06:00:00.000 2009-01-04 06:00:00.000
454 2009-01-05 06:00:00.000 2009-01-11 06:00:00.000
455 2009-01-12 06:00:00.000 2009-01-18 06:00:00.000
456 2009-01-19 06:00:00.000 2009-01-25 06:00:00.000
457 2009-01-26 06:00:00.000 2009-02-01 06:00:00.000
458 2009-02-02 06:00:00.000 2009-02-08 06:00:00.000
459 2009-02-09 06:00:00.000 2009-02-15 06:00:00.000
460 2009-02-16 06:00:00.000 2009-02-22 06:00:00.000
461 2009-02-23 06:00:00.000 2009-03-01 06:00:00.000
462 2009-03-02 06:00:00.000 2009-03-08 06:00:00.000
We have the following two tables :
Link ( GroupID int , MemberID int )
Member ( MemberID int , MemberName varchar(50), GroupID varchar(255) )
The Link table contains the records showing which Member is in which Group. One particular Member can be in
multiple Groups and also a particular Group may have multiple Members.
The Member table contains the Member's ID, Member's Name, and a Group ID field (that will contains comma-separated
Groups ID, showing in which Groups the particular Member is in).
We have the Link table ready, and the Member table' with first two fields is also ready. What we have to do now is to
fill the GroupID field of the Member table, from the Link Table.
For instance,
Read all the GroupID field from the Link table against a MemberID, make a comma-separated string of the GroupID,
then update the GroupID field of the corresponding Member in the Member table.
Please help me with a sql query or procedures that will do this job. I am using SQL SERVER 2000.
Hi,I use view to join difference table together for some function. However,when the "real" table fields changed (e.g. add/delete/change field). Theview table still use the "old fields".Therefore everytimes when I change the real table, I also needed open theview table and save it by SQL enterprise manager manually for update theview table field.Can we use a SQL command or other method to update it directly?Regards,Silas
View 4 Replies View RelatedI want to update a field with a trigger only if a specific field is updated.
When I try the code below, it updates the field when any field in the record is updated. Is there a way to only make look at picked_dt?
ALTER TRIGGER [dbo].[UpdatePickedDate]
on [dbo].[oeordlin_sql]
after update
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
Hi all,
I have a problem about a query to update a table
UPDATE Email SET EmailDT='31 Mar 2004' WHERE Idx={BDF51DBD-9E4F-4990-A751-5B25D071E288}
where Idx field is a uniqueidentifier type and EmailDT is datetime type. I found that when this query calling by a VB app. then it have error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" and i have tried again in Query Analyzer, same error also occur, the MS SQL server is version 7. Please help. thanks.
Not a SQL guy but can do enough to be dangerous :)Trying to update a record. We have records that have a field with datasurrounded by some comment text such as *** Previous Public Solution*** Start and *** Previous Public Solution *** End . What I am tryingto do is write a SQL statement that will:Check that field C100 = TICKET0001 (to test with one record beforerunning on whole db)Check that field C101 is = ClosedCheck that field C102 is nullCopy field C103 data to field C102 and strip out any words such as ***Previous Public Solution *** Start and *** Previous Public Solution*** endThanks for any help!Kevin
View 1 Replies View RelatedHi guys,
I need to get a column with the sum of the field "SUF" from table "JurnalTransMoves_1" when that field ("SUF") is ordered by the field "REFERENCE" from table "Stock", and Show the value only once.
The desired result should by something like:
Stock.REFERENCE
JurnalTransMoves.SUF
SUM(JurnalTransMoves.SUF) Group By Stock.REFERENCE
5752
10
60
5752
20
5752
30
5753
400
3000
5753
500
5753
600
5753
700
5753
800
5754
7
15
5754
8
Is there any chance to do that?
Thanks in advance,
Aldo.
Code Snippet
SELECT
Accounts.FULLNAME AS 'ACCOUNTS.FULLNAME',
Accounts.ACCOUNTKEY AS 'ACCOUNTS.ACCOUNTKEY',
Accounts.FILTER AS 'ACCOUNTS.FILTER',
Accounts.SORTGROUP AS 'ACCOUNTS.SORTGROUP',
AccSortNames.SORTCODENAME AS 'AccSortNames.SORTCODENAME',
Accounts.CreditTermsCode AS 'Accounts.CreditTermsCode',
CreditTerms.DETAILS AS 'CreditTerms.DETAILS'
CreditTerms.CURRENF AS 'CreditTerms.CURRENF'
CreditTerms.MONTH AS 'CreditTerms.MONTH',
CreditTerms.DAYS AS 'CreditTerms.DAYS',
CreditTerms.SHAREPRC AS 'CreditTerms.SHAREPRC',
CreditTerms.TEMF AS 'CreditTerms.TEMF',
CASE
WHEN CAST(Accounts.VatExampt AS int) = 0 THEN 'x'
WHEN CAST(Accounts.VatExampt AS int) = 1 THEN 'y'
ELSE 'Undefined' END AS 'VAT',
Stock.DOCUMENTID AS 'Stock.DOCUMENTID',
DocumentsDef.DOCNAME As 'DocumentsDef.DOCNAME',
CASE
WHEN CAST(Stock.DOCUMENTID as int) = 1 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 3 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 35 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 120 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 31 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 44 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 34 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 43 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 40 THEN Stock.REFERENCE
ELSE '' END AS 'Invoice No',
Stock.VALUEDATE AS 'Stock.VALUEDATE',
JurnalTrans.DESCRIPTION AS 'JurnalTrans.DESCRIPTION',
JurnalTrans.REF2 AS 'JurnalTrans.REF2',
JurnalTransMoves.SUF AS 'JurnalTransMoves.SUF',
JurnalTransMoves_1.SUF AS 'JurnalTransMoves_1.SUF',
JurnalTransMoves.TRANSID AS 'JURNALTRANSMOVES.TRANSID'
FROM
JURNALTRANSMOVES AS JurnalTransMoves_1
INNER JOIN JURNALTRANSMOVES AS JurnalTransMoves
INNER JOIN (SELECT DISTINCT JURNALTRANSID, RECEIPTSTOCKID, FULLMATCH, TABLFNUM, CKCODE, RSORT, RUSEFID FROM RECEIPTJURNALMATCH) AS ReceiptJurnalMatch_1 ON ReceiptJurnalMatch_1.JURNALTRANSID = JurnalTransMoves.ID
INNER JOIN ACCOUNTS AS Accounts ON JurnalTransMoves.ACCOUNTKEY = Accounts.ACCOUNTKEY
INNER JOIN JURNALTRANS AS JurnalTrans ON JurnalTransMoves.TRANSID = JurnalTrans.TRANSID
INNER JOIN STOCK AS Stock ON JurnalTrans.STOCKID = Stock.ID ON JurnalTransMoves_1.TRANSID = JurnalTrans.TRANSID AND JurnalTransMoves_1.ACCOUNTKEY = Accounts.ACCOUNTKEY
LEFT OUTER JOIN ITEMS AS Items
INNER JOIN STOCKMOVES ON Items.ITEMKEY = STOCKMOVES.ITEMKEY
INNER JOIN ITEMSORTNAMES AS ItemSortNames ON Items.SORTGROUP = ItemSortNames.ITEMSORTCODE ON Stock.ID = STOCKMOVES.STOCKID
LEFT OUTER JOIN ACCSORTNAMES AS AccSortNames ON Accounts.SORTGROUP = AccSortNames.ACCSORTCODE
LEFT OUTER JOIN CREDITTERMS AS CreditTerms ON Accounts.CREDITTERMSCODE = CreditTerms.CREDITTERMSCODE
LEFT OUTER JOIN DOCUMENTSDEF AS DocumentsDef ON Stock.DOCUMENTID = DocumentsDef.DOCUMENTID
WHERE
Accounts.SORTGROUP Between '3001' And '3020'
AND Accounts.ACCOUNTKEY IN ('123456')
ORDER BY Accounts.ACCOUNTKEY
Hi,
I have source table , fact table and four dim. tables , I have to update a field in fact table from source table.
How can I do it?
thanks...
In Access, you have a combo with column designations for example me.combofield.column(x) and you can update another field with those column(x) values.
How do you do it in MS SQL?
I didn't mean "from a 'combo' field'" in SQL(!) I just want to reproduce the equivalent of an Access combo box.
Hi. I'm not such an expert in sql and I wanted to update a table's fields only if the value that im going to update it with is not null. How do I do that?
What I mean is something like:
---------------------------------------------------
Update database.dbo.table set
if(@newvalue !=null)
afield = @newvalue;
-------------------------------------------------
Really need your help on this. Thanks.
HI everybody need help on this..
I have two tables below
table1
country countryid
africa ___
usa ___
italy ___
Spain ___
table2
countryid country name
1 africa
2 germany
3 italy
4 usa
I need to write the countryid of table 2 to the field countryid in table1 using the criteria of the correspoinding country name table 2 to country of table 1 if it write countryid else 0..
THE RESULT WOULD BE
country countryid
africa 1
usa 4
italy 3
spain 0
thanks
Hi,
I have one table (PermProportionalCosting) that contains employeecode, costcentre and proportionpercentage. An employee may have two or more records in this table, indicating that their salary has been split across multiple costcentres.
Another table (Employee) contains a default costcentre for each employee.
Another table (TransActualHistoricalMaster) contains the hours paid to each employee for each pay period.
My query so far selects all employees and the total hours worked from the TransMaster table, and then selects the costcentre and proportionpercentage from the PermProportionalCosting table. Multiple lines are created for all employees in the PermProportionalCosting table, with each line indicating the proportionpercentage and associated costcentre.
This is my query so far:
SELECT TransActualHistoricalMaster.EmployeeCode, Employee.PreferredName, Employee.LastName, CostCentre.Description, PermanentProportionalCosting.CostCentreCode,PermanentProportionalCosting.PercentageSplit,
TransActualHistoricalMaster.OrdHours
FROM TransActualHistoricalMaster
INNER JOIN Employee ON TransActualHistoricalMaster.EmployeeCode = Employee.EmployeeCode
INNER JOIN CostCentre ON Employee.CostCentreCode = CostCentre.CostCentreCode
FULL OUTER JOIN PermanentProportionalCosting ON TransActualHistoricalMaster.EmployeeCode = PermanentProportionalCosting.EmployeeCode
GROUP BY TransActualHistoricalMaster.EmployeeCode, Employee.PreferredName, Employee.LastName, CostCentre.Description, PermanentProportionalCosting.CostCentreCode, PermanentProportionalCosting.PercentageSplit, TransActualHistoricalMaster.OrdHours
This next bit is what I am unsure of.
I would like the CostCentre field from the Employee table to go into the PermanentProportionalCosting.CostCentreCode column where the employee doesn't have a record in the PermanentProportionalCosting table. In the above query, there is a null value for each employee that doesn't have a record in the PermanentProportionalCosting table, so I would like my query to replace the null value with the costcentre from the Employee table.
Any assistance would really be appreciated.
Thanks.
Hi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
View 3 Replies View RelatedI need create a field to store tax rate. I need only 2 decimal points. I defined the field as decimal, precision=5 and scale=2. Does it mean that it can hold value from 0.00 to 999.99?
View 12 Replies View RelatedHi,
I have a concern about adding a new field to a table with image field - which is huge.
Will there be a problem with some databases, where they have a hard time locating data correctly after such a large field?
Previously this happened to me, and what was advised to put all the big fields at the end of the table.
Thanks.
does anyone know if there is a way, or perhaps a custom toolbox control that is already developed that allows you to drag an entire dataset into a table, instead of pulling everything in field by field...?
was just curious.
-dk
Hi
I am having a table called as status ,in that table one field is there i.e. currentstatus.
the rows which are having currentstatus as "ticket closed",i want to move those rows into other table called repository which is having same table structure as status table.
I can do programatically.
but is there any way for every 3 months system has to check and do this action means moving to repository table automatically?
Please help me.
Thanks.
Hello,
I have a field in a table that I have to update to the number of the week.
Information i use is from another field, which is text in the format like :
01022005
02142005
07082005
11222005
...
12022005
mmddyyyy.
How to write an update to update empty field with a number of the week based on the value from another field.
Thank you very much.
Trying to run this SQL script
update Promotions
set PromotionDiscountData = '<ArrayOfPromotionRuleBase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PromotionRuleBase xsi:type="StartDatePromotionRule"><StartDate>2013-11-11T00:00:00</StartDate></PromotionRuleBase><PromotionRuleBase xsi:type="ExpirationDatePromotionRule"><ExpirationDate>2014-01-12T00:00:00</ExpirationDate></PromotionRuleBase><PromotionRuleBase xsi:type="ExpirationNumberOfUsesPerCustomerPromotionRule">
[code]...
but getting this error
Msg 402, Level 16, State 1, Line 1
The data types xml and varchar are incompatible in the equal to operator.Basically within each cell I am trying to change the StartDate only
if a db field "mynum" of type int contains for example the number 543.Is there a way I can update this field without first selecting the value?so for example set the the current value to +1
in sql server I want to update the "UpdatedDate" field automatically when I change ANY other field in that specific record.it has to be set to the current server time.
View 2 Replies View RelatedHi,
I am trying to update a field in a temptable with the count of items in another table. To illustrate, CustomerID=23 and I want the number of occurences in the temp table. Here's the code which DOESN'T work:
INSERT INTO TempTable
(
CustomerID,
FirstName,
LastName,
DateAdded,
AlbumPicture,
LayoutCount
)
SELECT
Albums.CustomerID,
Customers.FirstName,
Customers.LastName,
DateAdded,
AlbumPicture,
COUNT(*) FROM Layouts WHERE Layout.customerID = Albums.CustomerID
FROM
Albums JOIN
Customers on (Albums.CustomerID=Customers.CustomerID)
Please take a look at the COUNT line. Here I want to count the occurences of a specific customerid in another table and put in into th LayoutCount field.
SQL server reports "Incorrect syntax near the keyword 'FROM'". Any ideas how to achieve this?
Many thanks!!
Eric
Is it possible to update the filed used in the inner join
Update t1 set t1.name=t2.name2
From t1 inner join t2 on t1.name = t2.name