KB921896 Updates Did Not Install Error Code 0x3b0c
Mar 12, 2007
Hi,
I tried to instal KB921896 and get: updates did not install error code 0x3b0c.
In one of the summaries, I have
Product Installation Status
Product : Express Database Services Adv (WSUS)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9Express_Hotfix_KB921896_SQLEXPR_ADV.EXE
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_SharedTools
Error Number : 15116
Error Description : Unable to install Windows Installer MSI file
How do I fix this?
thanks
View 3 Replies
ADVERTISEMENT
Aug 20, 2007
SQL Server Express update KB921896 fails to install with error code 00002b2. I've tried this update several times with no luck. HELP offered is no help. Can't find this error code, and there is no text with the code.
View 1 Replies
View Related
Apr 23, 2007
Hi, i have a clean install of VB2005 Express and it's accompanying SQL Server 2005 Express (yes i'm new to .net).
After installation i ran Windows Update and it found about 40mb of updates including SP1 for SQL Server. All installed correctly up to a reboot point, after which it continued with the update process.
When it reached SP2 (for SQL Server) it tried to install but just says "Updates were unable to be successfully installed" and "The following updates were not installed: Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896)".
Now i have a permanent icon in my system tray which when clicked tries to do the install with the same result.
During the attempted install my floppy drive 'buzzes' a couple of times.
I'm running an AMD3000+ (64bit) cpu with Windows 2000 Pro SP4
As mentioned in another post (on the VB Install forum) my MyDocuments folder is on a networked pc which has caused other non related problems, not sure if this could be responsible for the error. It would seem unlikely as SQL SP1 installed without any errors.
Any help appreciated.
View 5 Replies
View Related
Nov 22, 2007
I am continually prompted to download & install this SP by the windows update utility but it always fails to install it.
I have XP SP2. No error msg is provided. I do not have ACT! installed. I do have Oracle 10g Expr. Ed installed. Competitive jealousy?
I found this online:
Important notes about the cumulative hotfix package
€¢ You must enable the SQL Server Management Object (SMO) extended stored
procedures and the SQL Server Distributed Management Object (SQL-DMO)
extended stored procedures before you install the cumulative hotfix package.
Where does one enable SMO & SQL-DMO?
I looked in the summary log file in the Hotfix directory and it says that the problem is
that SQL Express cant be started. See below.
I went into the SQL Configuration Mgr and tried to start it and it fails to start.
No reason given. Now what?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Time: 11/22/2007 09:44:37.546
KB Number: KB921896
Machine: TOSHIBA-ROGER
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (SQLEXPRESS) ENU RTM 2005.090.1399.00 x86 EXPRESS
Express Database Services (SQLExpress) ENU RTM x86 EXPRESS
**********************************************************************************
Products Disqualified & Reason
Product Reason
Express Database Services (SQLEXPRESS) Unable to start service
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Express Database Services (SQLEXPRESS)
Product Version (Previous): 1399
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_Replication,SQL_SharedTools
Error Number : 11042
Error Description : Unable to start service
----------------------------------------------------------------------------------
Product : Express Database Services (SQLExpress)
Product Version (Previous):
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : Client_Components,Connectivity,SDK
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
Unable to start service
Exit Code Returned: 11042
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
View 4 Replies
View Related
Apr 2, 2008
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error
An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
Any help or direction would be appreciated
View 2 Replies
View Related
Apr 10, 2008
I have tried several times to install Reporting Services 2000. I get 75% done and then receive the following:
Setup Error
An error has occured during setup. An error has occured while performing the following setup action. Please select help for more information about this error. You may be able to skip this action by selecting ignore, or retry the action by selecting retry. Selecting cancel will end the installation of SQL Server.
Configuring Microsoft SQL Server
Error Code: 1603
I have followed the resolution and continue to receive the above error. The server is running Windows 2003 standard edition, IIS 6 is installed and working, MDAC 2.8x installed, MS SQL 2000 and service pack 4 installed and working.The domain controller is SBS 2003 SR2.
Any help or direction would be appreciated
View 5 Replies
View Related
Aug 15, 2006
Hi,Before stepping into ado.net code to perform an insert or update, the insert / update has already taken place, just on starting the debugger. I use VS 2005 on SQL Server 2000. This did not happen with VS 2003 and SQL Server 2000.Anyone else encountered this?
View 2 Replies
View Related
Mar 31, 2007
I'm currently running Windows Vista x64 and SQL server 2005 on an HP laptop with a AMD Turion 64 processor. I've install all of the Windows Vista x64 update so far with no issues. However, I'm unable to install SQL server 2005 SP2 via Windows updates.
I was able to successfully download the service pack with no issues and it is currenly on my machine ready to install. The system does take a check prior to the install process beginning to perform the install.
I continuely get and "Error Code A91" when the install process is running. As a result the install does not complete successfully. When I used the "Get Help" option I get a list of possible error conditions but none of them seem be useful. I checked each one and none of them provide any help with a solution.
I've successful installed SP2 on Vista x32 system with no problem. Is this a "Windows Update" issue?
Thanks
View 11 Replies
View Related
Jan 28, 2008
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
View 4 Replies
View Related
Apr 10, 2007
I have sucessfully applied this patch but Automatic updates then down loads it again and agian...
I have applied it more than once now but it keeps saying that the update is ready to install.
I assume that I do not have to reinstall it again so how can I stop AU downloding it.
View 6 Replies
View Related
Mar 13, 2007
I can't start SQLEXPRESS.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
View 3 Replies
View Related
Oct 22, 2007
SQL 2005 SP2 Failes repeatedly - SQLServer2005SP2-KB921896-x86-ENU
Failed install on several Win 2003 Ent Ed., 32bit servers both named and default instances, both upgrades and direct installed versions. Why would MS put out such a riddle?
Error Message is " A recently applied update, KB921892, failed to install.
Also, confoundingly, the error log for the hotfix indicates
""9.00.3042.00 while the update version is: 9.00.2047.00."
But the version display on the properties of one of the servers is:
"Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2) "
Any help or comments are deeply appreciated, as the seems to be impacting DB Maintenance Plans, etc...
-Tim from Fairfax
View 1 Replies
View Related
Jan 29, 2004
Hi,
I have a series of Updates that I perform on 7 tables. I would like to execute these updates on a nighly basis via a job. I have the update statements lined up in a stored proc.
So I have -
Create Proc Update
AS
SET NOCOUNT ON
DECLARE @RETURNVALUE int
DECLARE @ERRORMESSAGETXT varchar(510)
DECLARE @ERRORNUM int
set @RETURNVALUE = 0
BEGIN ---Start here
Update table1
Update table2
.
.
.
Update table7
SELECT @ERRORNUM = @@ERROR
IF @ERRORNUM = 0
SELECT @RETURNVALUE = 0
ELSE
BEGIN
SELECT @ERRORMESSAGETXT = description FROM [master].[dbo].[sysmessages]
WHERE error = @@ERROR
RAISERROR (@ERRORMESSAGETXT, 16, 1)
SELECT @RETURNVALUE = 1
END
RETURN @RETURNVALUE
END --- END HERE
---
Is the error checking at the appropriate place? Should I have error conditions after every update? If yes then what condition do I check for?
Thanks
View 4 Replies
View Related
Apr 27, 2005
I have the following stored procedure:
CREATE PROCEDURE user1122500.sp_modifyOrganization(@Name nvarchar(100),@Location nvarchar(50),@Url nvarchar (250),@Org_Type nvarchar (50),@Par_Org_Id uniqueidentifier,@Row_Id uniqueidentifier,@Error_Code int OUTPUT,@Error_Text nvarchar(768) OUTPUT)ASDECLARE @errorMsg nvarchar(512)DECLARE @spName sysname
SELECT @spName = Object_Name(@@ProcID)SET @Error_Code = 0
IF @Url > ' ' BEGIN UPDATE USER1122500.ORGANIZATION SET URL = @Url ,UPDATED = GETDATE() WHERE ROW_ID = @Row_Id IF @@error <> 0 BEGIN EXEC user1122500.sp_tagValueList @errorMsg OUTPUT, N'ROW_ID', @Row_Id, N'URL', @Url SET @Error_Code = 51002 -- Error Message as created in the ERROR_LIST table SELECT @Error_Text = (SELECT DESC_TEXT FROM USER1122500.ERROR_LIST WHERE ERROR_CODE = @Error_Code) RAISERROR(@Error_Text, 11, 1, @spName, @@error, 'ORGANIZATION', @errorMsg) RETURN(@@error) END END
IF @Org_Type > ' ' BEGIN UPDATE USER1122500.ORGANIZATION SET ORG_TYPE = @Org_Type ,UPDATED = GETDATE() WHERE ROW_ID = @Row_Id IF @@error <> 0 BEGIN EXEC user1122500.sp_tagValueList @errorMsg OUTPUT, N'ROW_ID', @Row_Id, N'ORG_TYPE', @Org_Type SET @Error_Code = 51002 -- Error Message as created in the ERROR_LIST table SELECT @Error_Text = (SELECT DESC_TEXT FROM USER1122500.ERROR_LIST WHERE ERROR_CODE = @Error_Code) RAISERROR(@Error_Text, 11, 1, @spName, @@error, 'ORGANIZATION', @errorMsg) RETURN(@@error) END END
IF @Par_Org_Id IS NOT NULL BEGIN UPDATE USER1122500.ORGANIZATION SET PAR_ORG_ID = @Par_Org_Id ,UPDATED = GETDATE() WHERE ROW_ID = @Row_Id IF @@error <> 0 BEGIN EXEC user1122500.sp_tagValueList @errorMsg OUTPUT, N'ROW_ID', @Row_Id, N'PAR_ORG_ID', @Par_Org_Id SET @Error_Code = 51002 -- Error Message as created in the ERROR_LIST table SELECT @Error_Text = (SELECT DESC_TEXT FROM USER1122500.ERROR_LIST WHERE ERROR_CODE = @Error_Code) RAISERROR(@Error_Text, 11, 1, @spName, @@error, 'ORGANIZATION', @errorMsg) RETURN(@@error) END END
IF @Name > ' ' OR @Location > ' ' BEGIN
IF EXISTS (SELECT ROW_ID FROM USER1122500.ORGANIZATION WHERE NAME = @Name AND LOCATION = @Location) BEGIN EXEC user1122500.sp_tagValueList @errorMsg OUTPUT, N'NAME', @Name, N'LOCATION', @Location SET @Error_Code = 55004 -- Error Message as created in the ERROR_LIST table SELECT @Error_Text = (SELECT DESC_TEXT FROM USER1122500.ERROR_LIST WHERE ERROR_CODE = @Error_Code)-- RAISERROR(@Error_Text, 10, 1, @spName, @Error_Code, 'ORGANIZATION', @errorMsg) SELECT @Error_Text = (SELECT REPLACE(@Error_Text,'sp_name',@spName)) SELECT @Error_Text = (SELECT REPLACE(@Error_Text,'err_cd',@Error_Code)) SELECT @Error_Text = (SELECT REPLACE(@Error_Text,'tbl_name','ORGANIZATION')) SELECT @Error_Text = (SELECT REPLACE(@Error_Text,'err_msg',@errorMsg)) RETURN(@Error_Code) END
IF @Name > ' ' BEGIN UPDATE USER1122500.ORGANIZATION SET NAME = @Name ,UPDATED = GETDATE() WHERE ROW_ID = @Row_Id IF @@error <> 0 BEGIN EXEC user1122500.sp_tagValueList @errorMsg OUTPUT, N'ROW_ID', @Row_Id, N'PAR_ORG_ID', @Name SET @Error_Code = 51002 -- Error Message as created in the ERROR_LIST table SELECT @Error_Text = (SELECT DESC_TEXT FROM USER1122500.ERROR_LIST WHERE ERROR_CODE = @Error_Code) RAISERROR(@Error_Text, 11, 1, @spName, @@error, 'ORGANIZATION', @errorMsg) RETURN(@@error) END END
IF @Location > ' ' BEGIN UPDATE USER1122500.ORGANIZATION SET LOCATION = @Location ,UPDATED = GETDATE() WHERE ROW_ID = @Row_Id IF @@error <> 0 BEGIN EXEC user1122500.sp_tagValueList @errorMsg OUTPUT, N'ROW_ID', @Row_Id, N'LOCATION', @Location SET @Error_Code = 51002 -- Error Message as created in the ERROR_LIST table SELECT @Error_Text = (SELECT DESC_TEXT FROM USER1122500.ERROR_LIST WHERE ERROR_CODE = @Error_Code) RAISERROR(@Error_Text, 11, 1, @spName, @@error, 'ORGANIZATION', @errorMsg) RETURN(@@error) END END
ENDGO
This is the code that runs it:
string strSP = "sp_modifyOrganization";
SqlParameter[] Params = new SqlParameter;
string strParOrgID = null;
if (this.ddlParentOrg.SelectedItem.Value != "")
{
strParOrgID = this.ddlParentOrg.SelectedItem.Value;
}
Params[0] = new SqlParameter("@Name", txtName.Text);
Params[1] = new SqlParameter("@Location", this.txtLocation.Text);
Params[2] = new SqlParameter("@Url", this.txtURL.Text);
Params[3] = new SqlParameter("@Org_Type", this.txtOrgType.Text);
//Params[4] = new SqlParameter("@Par_Org_Id", strParOrgID);
Params[4] = new SqlParameter("@Par_Org_Id", "CA1FBC83-D978-48F1-BCBC-E53AD5E8A321".ToUpper());
Params[5] = new SqlParameter("@Row_Id", "688f2d10-1550-44f8-a62c-17610d1e979a".ToUpper());
// Params[5] = new SqlParameter("@Row_Id", lblOrg_ID.Text);
Params = new SqlParameter("@Error_Code", -1);
Params[7] = new SqlParameter("@Error_Text", "");
Params[4].SqlDbType = SqlDbType.UniqueIdentifier;
Params[5].SqlDbType = SqlDbType.UniqueIdentifier;
Params.Direction = ParameterDirection.Output;
Params[7].Direction = ParameterDirection.Output;
try
{
this.dtsData = SqlHelper.ExecuteDataset(ConfigurationSettings.AppSettings["SIM_DSN"], CommandType.StoredProcedure, strSP, Params);
if (Params.Value.ToString() != "0")
{
lblError.Text = "There was an error: " + Params.Value.ToString()+ "###" + Params[7].Value.ToString();
lblError.Visible = true;
}
}
//catch (System.Data.SqlClient.SqlException ex)
catch (System.InvalidCastException inv)
{
lblError.Text = lblOrg_ID.Text + "<br><br>" + inv.ToString() + inv.Message + inv.StackTrace + inv.HelpLink;
lblError.Visible = true;
}
catch (Exception ex)
{
lblError.Text = lblOrg_ID.Text + "<br><br>" + ex.ToString();
lblError.Visible = true;
// return false;
}
This is the exception being generated:
System.InvalidCastException: Invalid cast from System.String to System.Guid. at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SqlClient.SqlCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteDataset(SqlConnection connection, CommandType commandType, String commandText, SqlParameter[] commandParameters) in C:Program Files\_vsNETAddOnsMicrosoft Application Blocks for .NETData Access v2CodeVBMicrosoft.ApplicationBlocks.DataSQLHelper.vb:line 542 at Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteDataset(String connectionString, CommandType commandType, String commandText, SqlParameter[] commandParameters) in C:Program Files\_vsNETAddOnsMicrosoft Application Blocks for .NETData Access v2CodeVBMicrosoft.ApplicationBlocks.DataSQLHelper.vb:line 458 at development.youthleadercert.com.share.ascx.organizationForm.btnAdd_Click(Object sender, EventArgs e) in c:documents and settingsmark rubinvswebcachedevelopment.youthleadercert.comshareascxorganizationform.ascx.cs:line 352
I have no idea what field is even causing the error, nor do I see that I'm even using a GUID field. I've been stuck on this for 2 days. Any help?
View 2 Replies
View Related
Nov 14, 2007
Hi,
I've tried looking for a solution in other threads but I couldn't find anything that was completely the same as my situation. I got a new pc at work and I've tried installing SQL Server 2005 on it but everytime I try to install it, regardless of services included or excluded with the install, I cannot get through the install without this error. Below is the excerpt from the Summary.txt log file.
Error Code: -2147024894
MSI (s) (74!98) [17:10:55:858]: Product: Microsoft SQL Server 2005 Tools -- Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error 29549. Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2147024894
Error message: The system cannot find the file specified.
Error description: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlAssemblyRegSvcs
PerfTime Start: Do_sqlAssemblyRegSvcs : Mon Nov 12 17:10:55 2007
<Func Name='Do_sqlAssemblyRegSvcs'>
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog.
Error: 2147942402
Error message: The system cannot find the file specified.
Error descrition: Could not load file or assembly 'System.EnterpriseServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Error Code: -2147024894
Windows Error Text: The system cannot find the file specified.
Source File Name: sqlcasqlassembly.cpp
Compiler Timestamp: Thu Aug 11 01:12:01 2005
Function Name: Do_sqlAssemblyRegSvcs
Source Line Number: 155
I've searched for and found similar problems that deal with the microsoft.sqlserver.notificationservices.dll not being found but I haven't found a fix that worked for me. These are the fixes I've refered to thus far.
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1651162&SiteID=17
http://support.microsoft.com/kb/940971
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29549&EvtType=sqlcasqlassembly.cpp@Do_sqlAssemblyRegSvcs@Do_sqlAssemblyRegSvcs@x80131501
The answer that seems to fix this problem for everyone is to set the MSDTC service login as the NT AUTHORITYNetworkService account. The problem for me is that this is already set to this profile and I've tried resetting the services and rebooting the machine. I did not have a problem with my old machine, which as far as I can tell, is the same configuration, so I know this install should work.
I'm running Windows XP SP2. This is not the upgrade to SQL Server 2005 SP2, this is the original disk that came with Visual Studio 2005.
Has anyone else faced this issue where changing the MSDTC login wasn't the solution? Also, this is my first post, so I apologize if I've left anything out. Just let me know if you want any other information.
Thank you in advance.
Tim
View 7 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Jun 12, 2007
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
View 3 Replies
View Related
Dec 19, 2007
I have a project that consists of a SQL db with an Access front end as the user interface. Here is the structure of the table on which this question is based:
Code Block
create table #IncomeAndExpenseData (
recordID nvarchar(5)NOT NULL,
itemID int NOT NULL,
itemvalue decimal(18, 2) NULL,
monthitemvalue decimal(18, 2) NULL
)
The itemvalue field is where the user enters his/her numbers via Access. There is an IncomeAndExpenseCodes table as well which holds item information, including the itemID and entry unit of measure. Some itemIDs have an entry unit of measure of $/mo, while others are entered in terms of $/yr, others in %/yr.
For itemvalues of itemIDs with entry units of measure that are not $/mo a stored procedure performs calculations which converts them into numbers that has a unit of measure of $/mo and updates IncomeAndExpenseData putting these numbers in the monthitemvalue field. This stored procedure is written to only calculate values for monthitemvalue fields which are null in order to avoid recalculating every single row in the table.
If the user edits the itemvalue field there is a trigger on IncomeAndExpenseData which sets the monthitemvalue to null so the stored procedure recalculates the monthitemvalue for the changed rows. However, it appears this trigger is also setting monthitemvalue to null after the stored procedure updates the IncomeAndExpenseData table with the recalculated monthitemvalues, thus wiping out the answers.
How do I write a trigger that sets the monthitemvalue to null only when the user edits the itemvalue field, not when the stored procedure puts the recalculated monthitemvalue into the IncomeAndExpenseData table?
View 4 Replies
View Related
Apr 24, 2007
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
View 8 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Jul 13, 2006
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
View 1 Replies
View Related
Jul 20, 2005
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies
View Related
Feb 29, 2008
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
View 10 Replies
View Related
May 10, 2007
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
View 6 Replies
View Related
May 3, 2008
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
View 13 Replies
View Related
Jul 28, 2006
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
View 8 Replies
View Related
Jan 7, 2008
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
View 12 Replies
View Related
Oct 30, 2007
Hi...
I have data that i am getting through a dbf file. and i am dumping that data to a sql server... and then taking the data from the sql server after scrubing it i put it into the production database.. right my stored procedure handles a single plan only... but now there may be two or more plans together in the same sql server database which i need to scrub and then update that particular plan already exists or inserts if they dont...
this is my sproc...
ALTER PROCEDURE [dbo].[usp_Import_Plan]
@ClientId int,
@UserId int = NULL,
@HistoryId int,
@ShowStatus bit = 0-- Indicates whether status messages should be returned during the import.
AS
SET NOCOUNT ON
DECLARE
@Count int,
@Sproc varchar(50),
@Status varchar(200),
@TotalCount int
SET @Sproc = OBJECT_NAME(@@ProcId)
SET @Status = 'Updating plan information in Plan table.'
UPDATE
Statements..Plan
SET
PlanName = PlanName1,
Description = PlanName2
FROM
Statements..Plan cp
JOIN (
SELECT DISTINCT
PlanId,
PlanName1,
PlanName2
FROM
Census
) c
ON cp.CPlanId = c.PlanId
WHERE
cp.ClientId = @ClientId
AND
(
IsNull(cp.PlanName,'') <> IsNull(c.PlanName1,'')
OR
IsNull(cp.Description,'') <> IsNull(c.PlanName2,'')
)
SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Updated ' + Cast(@Count AS varchar(10)) + ' record(s) in ClientPlan.'
END
ELSE
BEGIN
SET @Status = 'No records were updated in Plan.'
END
SET @Status = 'Adding plan information to Plan table.'
INSERT INTO Statements..Plan (
ClientId,
ClientPlanId,
UserId,
PlanName,
Description
)
SELECT DISTINCT
@ClientId,
CPlanId,
@UserId,
PlanName1,
PlanName2
FROM
Census
WHERE
PlanId NOT IN (
SELECT DISTINCT
CPlanId
FROM
Statements..Plan
WHERE
ClientId = @ClientId
AND
ClientPlanId IS NOT NULL
)
SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Added ' + Cast(@Count AS varchar(10)) + ' record(s) to Plan.'
END
ELSE
BEGIN
SET @Status = 'No information was added Plan.'
END
SET NOCOUNT OFF
So how do i do multiple inserts and updates using this stored procedure...
Regards
Karen
View 5 Replies
View Related
Dec 20, 2006
Hi,
I just installed SQL Server 2005 on Windows Vista.
I am getting an error "An unknown error occurred in the WMI
provider. Error Code 8000000A" when connecting to a web server. The
reporting services is running. Is there any other installation that is
missing. Please help.
View 4 Replies
View Related
Mar 22, 2006
Hello everyone.
I am trying to install Project Server, and i'm having issues with sharepoint, and connecting to SQL:
dataserver is running sbs2003 sql2003 and analsys services.
server2 is running server2003 is to be the application server for project.
ProjectDb is the database that i have setup in sql.
username is the account that can control everything as administrer.
in Sharepoint is asks for the database server: <<dataserver>>
SQL Server database name: <<ProjectDb>>
I'm using windoes authentication and then i click ok, and get the error message.
I've also see the error message can not find the SQL Server, and access denied. Under ODBC i have installed the sql server information under System DSN.
Any help would be great.
Thanks
Everett Buel
View 3 Replies
View Related
Feb 28, 2006
Hello!
We just upgraded to SQL Server 2005 from SQL Server 2000. The DB was backed up using Enterprise Manager and restored with SQL Server Management Studio Express CTP. Everything went as expected (no errors, warnings, or any other indicator of problems).
The DB resides in a DB Server (Server1) and the application we are running is a Client/Server system where the AppServer resides on Server2.
During the application's operation all read, create, and delete transactions work fine but no update works. When viewing details in Trace Log I see this message after attempting any update:
Could not find server 'Server1' in sysservers. Execute sp_addlinkedserver to add the server to sysservers. (7202)
Any help is greatly appreciated,
Lucio Gayosso
View 19 Replies
View Related
Jun 19, 2007
Hi,After sending a request, I would get the possible error message.Not the code @@error, nor the exact content of sysmessages, but themessage like it could be in the log file.TIA,TSalm
View 1 Replies
View Related
Aug 18, 2006
my code was working fine but i changed a few things and now i cant figure it out.
the problem is that when i click my edit button none of the items go into the listbox. i added a label to track th error and i narrowed it done to a smaller ssection. Please help
//-----------------------------------------------------------------------------
/////////////////////////////////////////////////////////////////////////////////
protected void EditButton1_Click(object sender, EventArgs e)
{
int counter = 0; //counter for inserting into array
bool Validate = checknumberValidation(TextBox1.Text.ToString());
if (Validate == false)
throw new Exception(InvalidCheckNumber + TextBox1.Text);
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//get # of checkboxes and set array size;
int x = 0;
x = SetStringArraySize(); //set x to number of checkboxes that are checked
String[] updateString = new String[x]; //create string array of size x
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//for loop that will insert update statements into array
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
if (counter == 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
if (counter > 0)
updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
counter++;
}
}
//Add items to listbox and set listbox to visible.
Panel1.Visible = true;
PanelGridView.Visible = false;
Panel2.Visible = false;
updateCount.Text = updateString.Length.ToString();
updateCheckNumber.Text = TextBox1.Text;
int q = 0;
while (q < updateString.Length)
{
ListBox1.Items.Add(updateString[q]);
q++;
}
//Label1.Text = temp.Length.ToString(); //Test print to label
}
//-----------------------------------------------------------------------------
//COMPLETE
protected int SetStringArraySize()
{
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
int count = 0;
for (int i = 0; i < GridView1.Rows.Count; i++)
{
GridViewRow row = GridView1.Rows[i];
bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked;
if (isChecked == true)
{
count++;
}
}
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
return count;
//returns number of checkboxes that are checked
}
/////////////////////////////////////////////////////////////////////////////////
//-----------------------------------------------------------------------------
View 4 Replies
View Related
