I have a report that pulls a customer balance.
In crystal there was a way to have the page not show up if it met a certain criteria(say if the balance was 0 or negative).
I'd rather not filter them in SQL because it takes a few calculations to figure out what their balance is, and I already have SRS doing that calculation.
So is there a way to have a report page not print based on a certain criteria?
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedI want to make the ReportServer and Reports pages secured i.e not allow anyone to access these pages via browser.
I login to a machine as user ABC. This user does not have permission on reports.
if this user accesses ReportServer or Reports, expected is that access should be denied unless I enter
an account that has been given permissions.
for e.x. following pages should be secured.
http://<reportserver>/Reports
http://<reportserver>/Reports/Pages/Report.aspx?ItemPath=%2f<Report_Project>%2f<Report_Name>
http://<reportserver>/ReportServer
http://<reportserver>/ReportServer?%2f<Report_Project>&rs:Command=ListChildren
Actual result is that I am able to access these pages. When I click on the report I get the error (this is expected)
but then user ABC should be shown error on first page itself.
In short, for all the accounts that do not already have permissions on reports, the server should challenge me to enter an account and password.
Is there some setting in the configuration file?
Any help would be appreciated
Thanks in advance!
HI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
Hi,
I am trying to place text boxes in the header of a matrix in order to give each row group(i.e. each drill-down area in my matrix a header). This can be done in Reporting Services 2005.
However when I deploy this report to the corresponding url(Report Manager) it seems to be losing its formatting and not displaying correctly. The textboxes placed in the matrix header seem to go all over the place.
I do get a warning when I deploy the report ->
[rsOverlappingReportItems]. Some renderers do not support overlapping report items.
How can this be rectified?
I have two separate reports, and they work fine. But I noticed that in one report, regardless of length, it will show up in the Report Manager as one page that you just scroll down through. The second report always shows up as more than one page, and you have to click through the pages to see everything. Is this some setting that I am unaware of? I have tried finding a difference between the two reports, but can't see why one would show up as a long continuous report and the other is divided into pages. Any ideas?
Thanks in advance!
Hi,
I've created a simple .rdl report and seems to show the preview under my visual studio. But, when I add the .rdl file into the server and export them to be a .PDF, The pdf is created with two blank pages for every single page with data.
Please comment me to fix this.
Thanks.
I created a report with multiy pages and in between every page of data is a blank page. If the Report is Sixteen pages long i get eight blank pages. The Body size of the report is 8.5in, 25.475in. The Report porperities or 8.5 x 11in. Each page has a table with a page break at start set to true. But I still get blank pages in between the report.
View 4 Replies View RelatedI have a report that only has one page when previewed but when it's printed there are two pages. This is a problem because I get two printed pages to my report with "1 of 2 pages" on the first page and "2 of 2 pages" on the second but there is only data on the first page and the second has header and footer but no data.
Is there a way to force the report to fit everything on one page? Or some other setting I am missing?
Thanks.
Hi every body
I have developed an reporting solution for a customer with reporting services and using report builder.
When he connect to http://localhost/reports , he see the page like
http://img215.imageshack.us/img215/583/folderhl1.jpg
But i would to custom design of my default page, and other maybe. Where i can do it ?
Thanks all
Regards
Erwan Sarcelet, France
HI,
I working on an Invoice report on the last page of each invoice, there is section the client cut off
that section has:
Company Logo
Company Address
Invoice number
INvoice date
Sub total
PSP tax
and Amount due
The Height of the page footer is 1.71823in
This is the work around that I did,
I added a page footer, put a rectangle in it, set the Visibility expression on =Globals.PageNumber < Globals.TotalPages, so it will only show on the last page.
My problem is, on each page I am getting the page footer space, the page footer does not
supress, it's just hidden and every page is having the page footer space in the buttom.
I also set the PrintOnLast page on the page Footer, but that did not work as well.
in print on other pages as well.
I also tried to fit that page footer in a very small Height, but that did not work too, the page footer does not auto grow and the info is getting cut.
Please help.
Greetings,
I have a report that is created that is typically 2-3 pages long. I've tried the "ExecutionInfo.NumPages" but it always results in "1" as the answer. Code is something like this:
============
...
Dim reportHistoryParameters As sqlprod1_res.ParameterValue() = Nothing
Dim SessionId As String
Dim execInfo As New ExecutionInfo
Dim execHeader As New ExecutionHeader()
Dim result As Byte() = Nothing
Dim format As String = "PDF"
Dim devInfo As String = "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>"
Dim extension As String = ""
Dim encoding As String = ""
Dim mimeType As String = ""
Dim warnings As sqlprod1_res.Warning() = Nothing
Dim streamIDs As String() = Nothing
result = rs.Render(format, devInfo, extension, encoding, mimeType, warnings, streamIDs)
execInfo = rs.GetExecutionInfo()
Dim Pages As Integer = execInfo.NumPages
============
Also tried to count streams with the same result.
Any ideas?
Thanks
Dan Ribar
I created a report that uses a parameter to return a record per page basically, but it doesn't return all records that match the parameter. Thoughts?
Specifically, I have a table that tracks various sites my engineers are responsible for; each have about twelve. The problem is that every time I select an engineer I only see six pages (records). When I select two or three, then I see 12 or 18 pages, but still just six records per engineer.
Any help is greatly appreciated! Neil
Hi,
I have a master report that contains 4 sub reports. The first two subreports contains matrix controls that can (and will) spill over to a second page. With 5 columns of data the matrix subreports fit nicely onto one page, 6 or more columns and they will spill into a second page. The second two subreports will always fit onto one single page. All four subreports are inside a list control which will repeat for each structure. e.g. Each subreport will be rendered once per structure.
The master report renders perfectly (with no blank pages) whenever the two subreports with the matrix controls fit on one page each. However, whenever the matrix control subreports spill into a second page it causes the master report to insert a blank page after subreport 3 and 4, bare in mind subreport 3 and 4 both fit perfectly on a single page. I've check all margins and page widths etc.
The blank page problem only occurs whenever the matrix needs to span two pages.
Anybody encountered this problem or have any ideas how to fix it? I'm beginning to think it is a bug with reporting services.
Regards,
Adrian.
When viewing a report our users see that it is x number of pages, however when they print the report is actually y number of pages. For example once a report is ran, it says that it is 43 pages, however in actuality it is 62 pages. If they only want to print the last page, they choose to print 43 from the print dialog box, but that gives them a page in the middle of the report not the last page. Is there a way to remedy this?
Thank you,
Kaysie
Hi forum members.
I'm a new SQL Reporting user and could use some guidance.
Here is a simple explanation of my application: imagine a report which prints out a grade report for each of 10 students. Depending on how many notes a teacher makes on the student's individual grade report, each student's report might be 1 or 2 pages long.
To create this report I just used a List report item and laid out a typical grade report and filled in the appropriate fields (name, teacher, etc.) from my dataset query.
When I run the report, it is running great and the students and their grade reports all print out.
The problem I am running into is I want to make sure each student's name is on page 2 if the grade report for that student goes more than 1 page (so pages aren't separated from each other or mixed up). I tried using a Report Footer, but that just put the first student's name at the bottom of every page. I could put a textfield at the bottom the list control but that would just appear at whatever length page 2 ended up being (basically you could have a "footer" at mid-page if the whole list only took up 1.5 pages).
How can I create a footer for each set of pages? Basically this would be a "footer" to the list control itself.
Thanks in advance!
Dave
davehunt00
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
Hello,
I printed Browser Report,but it is getting Blank pages in middle,
that is header part only visible for 2 pages and then data getting printed,
any ideas??
I wrote a report today containing one grouping. Everything appears all right in the report preview, except that every other page is "blank", i.e., shows only the page header and page footer; all grouping and detail information is missing.
The data on the page following the blank page seems to pick up where the previous non-blank page left off, so all information seems to be present within the report.The report width and height properties are typical portrait-style -- 8.5 x 11 inches. The columns do not "run off the edge" of the report page boundary. I haven't selected any page break for the grouping, as the grouping detail is typically only a few rows long, and would otherwise result in a very large number of pages.
Hi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
Hi All
I have a report that looks and works fine in the native 'screen layout' but when I select the Print Layout option, a blank page is inserted after each page. These blank pages contain the header and footer, but not the body section of the report. Has anyone else seen this sort of thing? Is there something in my report layout causing this, or is it a bug in the Print Layout rendering?
Thanks much
in microsoft doc there is written on the topic of BP Extensions with SSD's in SQL Server 2014: only clean pages are written to disk... does this mean data pages that have not been modified yet? or also those data pages that have already been modified, and where log has finished writing and the transaction has been marked as commited??
why are there clean data pages being written to L2 cache to make space for other not modified pages? I mean, shoudnt they be modified first, before letting other unmodified data pages into the Cache? I mean they have still to be modified..that makes no sense to me to page them out and page them in again just for other data pages...
When generating a SQL report, external images from a Sharepoint image library are not shown (red X).
An unattended execution account is set correctly, the image exists. I have tried with setting the UseSessionCookies to true/false. nothing seems to work.
Anyone any ideas wath else I can try?
Hi,
I am using SSRS to generate a 4 page statement... So i have a plan whose no. of Participants is 3271 rows... so While we try to export them to a PDF we will have around 13084 pages... but we cannot export so many pages at one time (it craps out). so right now we are breaking it up by start part and stop part and creating a pdf..
Is there a way that SSRS can handle so many pages at one go without any problems... if so how ??
Regards
Karen
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
I need to create a report showing the title the first and last name of all sales representatives-This is what I have so far but am having difficulty retrieving ONLY the "Sales Representatives" Titles.
Select Firstname, Lastname, Title
From Employees
Where ???
Hi, I have 8 charts on a report that no longer show up on the report.
the datasets they are based on still produce data when queried.
All I see is white space plus the textbox titles?
The charts are there in layout view and still correctly reference the right datasets and fields.
I have a report that shows a header, details and a footer
The detail line never prints lines with asterixes in them, e.g.
"**blah blah**"
As soon as I delete the asterix from the database, the line appears on the report
Any ideas anyone?
Hi All,
I am using SQL Server 2008 Reporting Services Charts. I am using Chart Type as Column (3-D Cluster Cylinder). I am using X axis of graph as Time/Date field. I have two questions while displaying report in desired format:
1. Currently I have grouped Category field on Date field fetched from database. It groups values per day. Now whenever there is no data for a particular date, it skips that date in chart. How can I show each and every date on report graph in user given date range?
2. If there is no data for a legend of a chart, how can I display a Bar in Chart with value 0. This means, I have to show Bar with Zero value.
Currently if I Show data labels of Chart, it just shows data for 0 value but does not show Bar with 0 value which could be residing as flat on X axis for a particular legend.
Please help me resolving this issues for Chart graphs.
Please let me know if you need any more details.
Thanks in Advance.
Regards,
Ashwin B
I have a matrix report that I am using with MonthName(Fields!Month.Value) across the top of the report. However, when there is no data under the column, the month is skipped. So, for example, I get this:
January March
Actual Goal Actual Goal
25 25 30 35
I have tried adding
iif(Sum(Fields!Total.Value, "DatasetName")> 0, Sum(Fields!Total.Value, "DatasetName"),"N/A")
But it still is not showing up.
Any ideas?
Thanks,
SHP
I installed the Reporting Service for Share Point just fine but when I go to central admin I do not see the reporting service section. Any Ideas?
View 4 Replies View RelatedHi,
I have a report with 5 filters which can be applied to it. The records are grouped by the Rotation programme there are on, with a subtotal for each unique programme name.
The report seems to work fine, but upon closer inspection - we noticed that 2 of the records are not being displayed. As a result, the total count is out by 2.
We tracked down the missing records so I ran the SQL query with a Where clause, and it was able to find the two records.
What could possibly cause this behaviour? Please see included SQL statement :
Code Block
SELECT Posts.PostNumber,COUNT(Posts.PostNumber) AS RPCount, Incumbents.Name AS IncumbentName, Grades.GradeTitle, Specialties.SpecialtyTitle,
Hospitals.Name AS Hospital, Genders.Gender, [Incumbent History].YearGraduated, COUNT([University Origins].Origin) AS OriginCount,
Incumbents.Nationality AS NationalityID, Countries.[Country Name] AS Nationality, [Rotation Programmes].[Programme Name],
Posts.[Post Approved for Training], [University Origins].Origin, Posts.OldPostNumber, [Rotation Programmes].[Programme ID]
FROM Posts INNER JOIN
Incumbents ON Posts.PostNumber = Incumbents.PostNumber INNER JOIN
[Incumbent History] ON Incumbents.[Incumbent ID] = [Incumbent History].IncumbentID INNER JOIN
Grades ON Incumbents.[Official Grade] = Grades.GradeID INNER JOIN
Specialties ON Posts.Specialty = Specialties.SpecialtyID INNER JOIN
Hospitals ON Posts.HospitalID = Hospitals.[Hospital ID] INNER JOIN
Genders ON Incumbents.GenderID = Genders.GenderID INNER JOIN
Countries ON Incumbents.[Country Of Birth] = Countries.[Country ID] INNER JOIN
[Rotation Programmes] ON Posts.[Rotation Programme] = [Rotation Programmes].[Programme ID] INNER JOIN
[University Origins] ON [University Origins].[Uni Origin ID] = Incumbents.[University Origin]
GROUP BY [Rotation Programmes].[Programme Name], Posts.PostNumber, Incumbents.Name, Grades.GradeTitle, Hospitals.Name, Genders.Gender,
[Incumbent History].YearGraduated, [University Origins].Origin, Incumbents.Nationality, Countries.[Country Name], [University Origins].Origin,
Posts.[Post Approved for Training], Posts.OldPostNumber, Specialties.SpecialtyTitle, [Rotation Programmes].[Programme ID]
I added tooltips to the column headings in a report deployed to SQL05 RSvc. When the report is viewed in the web-based report viewer, the tooltips display properly. The report is normally launched by a Winforms app that opens a window containing a .Net report viewer (2008 version). In this viewer, the tooltips do not display. Does the desktop viewer not support tooltips on report items?
View 3 Replies View Related