Keeping Same DateTime Format And Others In Production Server
Jul 5, 2007
Hi,
I noticed that some of my Stored Procedure is not working well on the production server cause it seems that it has not the same DateTime format...(amongst other things ).
Example of differences between DateTime format :
-----------------------------------------------------------------------
My station (SQL Express 2005) : 26/06/2007 3:17:20 PM
Production server (SQL 2005 Enteprise) : 2007-06-26 15:17:20
How can i make the format of the database unchangeable so it keep the same format on the production server?
I use SQL Express 2005 for coding and SQL 2005 Enteprise for production.
Thanks
View 5 Replies
ADVERTISEMENT
May 14, 2004
I have just finished upsizing an Access database to SQL Server 2k. Now the SQL Server need to be run on a test basis to determine if i need to make more changes to the front-end (Access). The problem I am facing is how to keep the two databases in sync while I am testing. Any suggestions?
Also any suggestion or comments on how to run a test setup like this (in parrallel) are also welcome since this is my first time attempting a project like this.
Let me know if anyone needs more info.
Thanks in advance.
View 1 Replies
View Related
Apr 28, 2007
In one step of an SSIS package, i create an outgoing XLS filename based on the current datetime setting, a la:
"myFileName_" + (DT_WSTR,4)YEAR( getdate()) + RIGHT("0" + (DT_WSTR,2)MONTH( getdate()),2)+
RIGHT("0" + (DT_WSTR,2)DAY( getdate()),2) +
RIGHT("0" + (DT_WSTR,2)DATEPART("hh", getdate()),2) +
RIGHT("0" + (DT_WSTR,2)DATEPART("mi", getdate()),2) +
RIGHT("0" + (DT_WSTR,2)DATEPART("ss", getdate()),2) +".xls"
which provides the format as myFileName_yyyymmddhhmmss.xls.
This value is then assigned to a variable, user::myFilenameDateTime.
This variable is referred to in various steps which need the full pathname or filename.
I found, though, that in subsequent steps, the value for user::myFilenameDateTime is re-calculated whenever the variable is invoked.
So in one Task i created the physical output XLS file and named it "correctly", eg, myFileName_20070428090204.xls; in the next Task, i call a Stored Procedure in SQL Server 2005 to email the file with a corresponding message (that pulls in more data from the database).
The single Parameter to the Stored Procedure (that does the emailing) is the supposed/expected full Pathname of the outgoing file just produced but the parameter no longer represents the original filename -- and has changed slightly (a few seconds have been added) and the filename is now, myFileName_20070428090210.xls; consequently, my Email Distribution program cannot find the file with that specific name, although File = myFilename_20070428090204.xls does certainly exist.
so it appears that these variables are calculated realtime whenever encountered.
1) Am I misunderstanding something or misusing the variable assignment?
2) How can i keep << myFileName_yyyymmddhhmmss.xls >>, "static" throughout the duration of the overal SSIS Process.
3) I would think that even if I assign the derived myFileName value initially to ANOTHER "static" variable, this won't achieve anything because the new variable will be re-calculated again, as well, when it is invoked.
thx/spirits,
seth j hersh
View 3 Replies
View Related
Jan 14, 2004
I want the users of my site to be able to write a couple of paragraphs, save it to SQL Server and then have it read back and look the same. I don't want the users to be able to add any html to the text they submit. I just want them to be able to seperate or indent their paragraphs.
At one point, I had a textbox that saved text to the server and read it back the same way it was originally inputed. However, I can't figure our what I had done to make it work.
Any ideas?
Thanks
View 2 Replies
View Related
Feb 12, 2007
Hi,
I am trying to place text boxes in the header of a matrix in order to give each row group(i.e. each drill-down area in my matrix a header). This can be done in Reporting Services 2005.
However when I deploy this report to the corresponding url(Report Manager) it seems to be losing its formatting and not displaying correctly. The textboxes placed in the matrix header seem to go all over the place.
I do get a warning when I deploy the report ->
[rsOverlappingReportItems]. Some renderers do not support overlapping report items.
How can this be rectified?
View 5 Replies
View Related
May 21, 2008
I have 3 dropdownlist server controls on my webform for the dateofbirth field. One for the day("1", "2" format), one for the month ("Jan", "Feb" format) and one for the year("1994", "1995" format). When the submit button server control is clicked i need to concatenate the day, month and year in the format 01-jan-1994 since i have the dateofbirth field datatype as datetime in my sql server table. I have declared the date variable stored procedure as "@dateofbirth datetime". Provide me the full coding.
Thanx in advance
View 1 Replies
View Related
Jan 17, 2008
e.g.
1st March 2005 12:00:00
is showing as
01/03/2005 00:00:00
instead of
01/03/2005
Why does this happen?
View 4 Replies
View Related
Jun 15, 2005
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
View 3 Replies
View Related
Apr 8, 2015
I'm trying to convert a varchar value to datetime format but it throwing below error:
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
here is sample query:
declare @test varchar(20)
set @test ='30/04/2015 23:59:59'
select CONVERT(datetime, @test)
One interesting observation above query run fines in Sql 2008 but not in Sql 2014...
View 3 Replies
View Related
Nov 5, 2007
Hi,
I am trying to access a date column up to millisecond precession. So I cast date to as follows:
Code BlockCONVERT(varchar(23),CREATE_DATE,121)
I get millisecond part as a result of query but its 000?.
When I try to test the format by using getDate instead of DateTime column I get right milliseconds.
CONVERT(varchar(23),GetDate(),121) --Gives right milliseconds in return
View 4 Replies
View Related
Mar 17, 2015
I am importing a couple SAS datasets to SQL Server 2008 for a project. The dates are in a float format, they show up as DT_R8 in SSIS. How can I convert these values to SQL server datetime? I have tried dozens of methods I found on-line with no success, I keep getting 'Arithmetic overflow error converting expression to data type datetime.' errors.
View 0 Replies
View Related
Aug 26, 2007
Im getting a datetime format problem(mm-dd-yyyy for dd-MM-yyyy), when I install SQL Server 2005 Express. {The exception is: The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.}
My windows Regional and Language options English (United Kingdom), Sort date format is dd-MM-yyyy.
When converting the date time in Sql server is using the mm-dd-yyyy format. But Im supplying the dd-mm-yyyy format date time.
I tried number of things none of them worked for me
1. Tried changing the default language and get the date time format
- exec sp_configure 'default language', 2057
reconfigure
- did not work
EXEC sp_defaultlanguage 'my user name', 'British'
- did not work
(Ref: http://www.cactushop.com/support/UKUS-date-format-issues-with-MS-SQL---conversion-errors-or-blank-pages__592__.htm)
2. Tried a registry hack by opening regedit, and get the following 3 language keys and change it to decimal 2057:
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server90ToolsClientSetupCurrentVersion]
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server90ToolsSetup
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1Setup]
(Ref: http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=62891)
- did not work
3. Every thing in the Regional and Language options to UK and British with the date time format input language keyboard and every think else I could think of, which could link to US English or US date format --------- Did not work
4. even went into the extend of modifying the date format on a Windows machine for new users account by editing the HKEY_USERS registry key and creating a new user - Did not work
(Ref: http://www.windowsitpro.com/Article/ArticleID/39407/39407.html )
5. Uninstall and reinstall SQL server express several time and did the steps 1 4 where applicable did not work¦.
If anyone has any idea of what I have to do to change the date time format in the SQL Server 2005 to use the dd-mm-yyyy format for dates....
Please help me or point me in the direction in which I have to look for an answer.
Thank you very much¦.
View 9 Replies
View Related
Jun 19, 2007
I am populating oracle source in Sql Server Destination. after few rows it fails it displays this error:
[OLE DB Destination [16]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description:
"Invalid date format".
I used this script component using the following code in between the adapters, However after 9,500 rows it failed again giving the same above error:
To convert Oracle timestamp to Sql Server timestamp
If Row.CALCULATEDETADATECUST_IsNull = False Then
If IsDate(DateSerial(Row.CALCULATEDETADATECUST.Year, Row.CALCULATEDETADATECUST.Month, Row.CALCULATEDETADATECUST.Day)) Then
dt = Row.CALCULATEDETADATECUST
Row.CALCULATEDETADATECUSTD = dt
End If
End If
I don't know if my code is right . Please inform, how i can achieve this.
View 6 Replies
View Related
Dec 20, 2006
Hello all,
I'm trying to write a query against an exisiting table that i can't modify and i'm running into a bit of a problem. The table stores timestamps as a char field instead of a datetime.
So, i've had to use the CONVERT function to change it to a datetime during my query. A sample is below:
SELECT convert(datetime, logged, 120) FROM AP200310
This works, except i want to include the option of querying a single day. Since the data that is returned is in this format:
12/12/2006 6:54:15 PM
The following sql statement doesn't work:SELECT convert(datetime, logged, 120) FROM AP200310 WHERE logged = '12/12/2006'
Thanks in advance for any help.
View 7 Replies
View Related
Jan 26, 2007
Hi, I wanted to take a date from my Sql server. it is save as dd/mm/yyyy. but when i use the select command it return me dd-mm-yyyyT00:00:00.0000000+08:00. i try to use this following code but it is not working....thedate = String.Format("{0:dd/MM/yyyy}", (reader.GetSqlDateTime(1)))
here is my complete codePublic Function deleteOrder(ByVal oid As Integer) As String
conn = dbCon.getConnection()
Dim cmd1 As New SqlCommand
Dim reader As SqlDataReader
Dim valid, sendDate, sd As String
Dim thedate As String
Dim cancelPeriod As String = CStr(System.DateTime.Today.AddDays(+3))
cmd1.CommandText = "select orderSendDate " & _
"from orders " & _
"where orderID = @oid"
cmd1.Parameters.Add("@oid", oid)
cmd1.Connection = conn
conn.Open()
reader = cmd1.ExecuteReader()
If Not reader.HasRows Then
valid = "No match found"
Else
If reader.Read Then
'String.Format("{0:dd/MM/yyyy}",(dr.GetSqlDateTime(1)));
thedate = String.Format("{0:dd/MM/yyyy}", (reader.GetSqlDateTime(1)))
'sd = reader("orderSendDate").ToString
'sendDate = sd.Substring(0, 10)
conn.Close()
End If
End If
'Return errMsg
If thedate = Convert.ToDateTime(cancelPeriod) Or thedate < CStr(System.DateTime.Today.AddDays(+3)) Then
valid = "You are not allowed to change"
Else
Try
conn.Open()
Dim strUpdate As String
Dim cmd As New SqlCommand
strUpdate = "update orders set orderStatus = @os where orderID = @oid"
cmd.Parameters.Add("@os", "c")
cmd.Parameters.Add("@oid", oid)
cmd.CommandText = strUpdate
cmd.Connection = conn
cmd.ExecuteNonQuery()
conn.Close()
valid = "Cancellation succesful"
updateOrderItemStatus(oid)
Catch ex As Exception
'Response.Write(ex.Message)
errMsg = ex.Message
conn.Close()
End Try
End If
Return valid
End Function
When i call my web method it gives me an error saying that page is not found... please teach me how to convert it.
thx
View 3 Replies
View Related
Mar 1, 2007
Datetime for using SQLSERVER QUERY NOT ANOTHER
MM/DD/YYYY HH:MM:SS AM/PM format using only sql query not using SUBSTRING ANY IDEAS
????
regards
sadeesh
View 1 Replies
View Related
Jul 10, 2007
I have installed the trial version of windows server 2003 on the second hard drive on my computer. I set up IIS and ran my website on it but the problem is when I do something on the site, which has a sql insert statement regarding datetime.now it says, "conversion failed when converting datetime from character string"
I think it's to do with the clock on server 2003, the format is like: 11/07/2007 2:39:59 a.m.
I think it should be in format AM and not a.m.
Any ideas on how to change the time format on a computer?
Or should I just change the Columns in my table to a Nvarcher value or something?
thanks
View 8 Replies
View Related
May 7, 2004
Hello:
Hello:
I have some code in a asp.net function in C# like this:
DateTime datetime = DateTime.Now;
SqlCommand CommandEvent = new SqlCommand("spAddNewEvents", Connection);
CommandEvent.Transaction = Trans;
CommandEvent.CommandType = CommandType.StoredProcedure;
*I try First : CommandEvent.Parameters.Add("@date", datetime);
*I try Secound: CommandEvent.Parameters.Add("@date", SqlDbType.DateTime,
8).Value = datetime;
and have some storeprocedure with this code
CREATE PROCEDURE dbo.spAddEvents
(
@guid uniqueidentifier,
@language char (2),
@date as datetime,
@eventId as varchar (50),
@userid as varchar (20)
)
AS
execute('insert into tblEvents'+@language+'( guid, [date], [id], userid)
values('''+@guid+''','''+@date+''','+@eventId+','''+@userId+''')')
GO
The problem is when I try to insert a new event. The event insert are fine,
but the datetime's secound in tblEvents always is 00, and I check the
datetime variable to insert and have secound different that 00.
the table definition is Data Type: datetime and Length: 8, how must be?
I run Profiler and a I get this:
exec spAddEvents @Guid = 'C879D062-C268-4A3E-8D58-1937B7612EC2', @language = N'ES', @date = 'May 6 2004 11:29:58:140PM', @eventId = 6, @userid = N'anibal'
Best regards.
Owen.
View 1 Replies
View Related
Jun 10, 2006
Hi,I'm new to SQL Server (Express) and I wonder if there is a way that I can format a date's appearance in the database, that is, the format of the datetime column.
When I view a date in VWD Express, it's in my country's format (2006-11-24 for example) but when I try to insert a date using the same format using a web form, the inserted date in the database becomes 1905-06-something. This happens regardless of whether I'm inserting a string or if the string has been converted to a date via CDate.
So, is there a way I can set the database's date format? And why is it wrong anyway? It's bugging me as the original (Swedish) date is already in the ISO format that SQL Server seems to use (such as yyyy-mm-dd), and I'm using localhost with Windows set to Swedish, IE 6 set to Swedish, and even web.config's UICulture and Culture to Swedish as well.
Of course, I can rearrange the order of the date's numbers to get proper values in the db, but it seems as an unnecessary step and I can't figure out what format to use anyway.
All help is very welcome.
Pettrer
View 6 Replies
View Related
Jun 24, 2002
Hi There,
I'm in a learning phase of SQL server 7. I need your help for the following:
I am selecting from a dropdown list Month ('January, february,..... but not as '01', '02'..) and Year (2000, 2001.....), when they are selected a table is displayed for next 12 months starting from the selected month (like say, if April and 2002 was selected, my other table will show Apr. 02 - Mar. 03 ), and data is inserted into it manually.
My question is How to insert this date into the sql database...as I just need the month and the year.....and in sql server the date datatype is "datetime", also i have only one column for this month and year....should i change my tables and make different columns for Month and Year. Can only Month (Januray, february.....) and Year (2000, 2001...) be inserted.
View 1 Replies
View Related
May 30, 2007
Dear Folks,
how can i know the datetime format of my current session? and is it possible to change that to required format permanently for that particular database?
thank you very much
View 3 Replies
View Related
Dec 1, 2007
What is the easy way to get the below data and Time Format.
11/14/2007 3:51:49 PM
Thanks
Venu
View 15 Replies
View Related
Feb 28, 2008
Hi All,
I would like to know, how the datetime will be stored in the sqlserver datetime column.
Because some time i am giving the date in dd/mm/yyyy and sometime mm/dd/yyyy.
while give the date in mm/dd/yyyy works fine but not in the another case. and also while i execute a query on query analyser it shows the datetime in
yyyy/mm/dd format.
So anyone can please tell me how the dates will be stored in the datetime column of sqlserver database?
Thanks in Advance.
Regards,
Dhanasekaran. G
View 2 Replies
View Related
May 22, 2007
In SQL query I have to find records which occour between two dates. I created Select query with two parameters @date1 and @date2 in clasue WHERE. But problem is with date format of my parameters. This format is to long. I dont wont to use time part of these parameters only date part is needed. When I put two identical dates my query doesn't find any data because both dates are eg. 2007-05-22 00:00:00. But I need data for all this day. How to correct this problem? Regards Pawel.
View 2 Replies
View Related
May 12, 2008
Hi, I have a SQL Express 2005 db, with the following format for the datetime vales: dd/mm/yyyy, and if the day or the month has only one digit, it'll be completed with a zero(ie 09/03/2007). The problem is that I sent a backup(.bak file) of it to other people, but they see the date as mm/dd/yyyy and the dates are not completed with zeroes(ie 5/5/2007). How can we both have the same format? Any ideas? Thanks a lot.
View 2 Replies
View Related
Apr 12, 2000
I'm still having a problem inserting date fields into sql server.
I don't understand how it accepts datetime.
I have all of my date columns defined with datetime format and all of the dates are coming out as the default of: 01/01/1900.
I tried to insert the data as string and sql server doesn't understand that format.
Here's some of the code:
We're going from flat VSAM files to an sql server database.
This is one huge sql insert statement with about 75 fields being loaded into a table so I'll only post one the date fields.
Here's where I call the String functions from:
First, I have to uncomp the field from binary to String:
ls_sdate = Right$(CompToStr(bufMast.Name_Chg_Date), 8)
And then I send this string to my Convert_Date function:
lsDet1 = Trim$(lsDet1) & Convert_Date(ls_sdate) & ","
(lsDet1 is a concatenated String of the SQL Values to be inserted)
And Here are the two functions:
The date field is coming in like: 1991112 where if the first character is a 1, the year is 1900 and if the first character is a 0, the year is 2000.
I get correct fields in my message box like 1996/12/31 but then I don't know what sql server does to it in datetime format.
When I check the database table it looks like: 01/12/1900
Maybe there is something wrong with my Convert_Date function;
__________________________________________________ ____________
Public Function CompToStr(aCompdata() As Byte) As String
'This is one way in which you can unpack a comp field. As I mentioned,
'you might be better off designing a flexible class to do the
'conversions. At minimum, this function should be expanded to
'accept a data picture as a param (decimal placement and so on).
Dim lsRtnStr As String
Dim lsHoldStr As String
Dim llCount As Long
For llCount = 1 To (UBound(aCompdata) + 1) Step 1 'loop thru the passed array.
lsHoldStr = Hex(aCompdata(llCount - 1)) 'Convert the byte to a Hex string.
If Len(Trim$(lsHoldStr)) = 1 Then 'if the highorder nibble was 0
lsHoldStr = "0" & Trim$(lsHoldStr) 'pad it with a leading zero.
End If
lsRtnStr = lsRtnStr & lsHoldStr 'Concat it to the return string.
lsHoldStr = "" 'clear the var for the next pass.
Next
lsRtnStr = Replace$(lsRtnStr, "C", " ") 'Positive sign replacement.
lsRtnStr = Replace$(lsRtnStr, "D", "-") 'Negative sign replacement.
lsRtnStr = Replace$(lsRtnStr, "F", " ") 'Unsigned - implicit positive.
lsRtnStr = Trim$(lsRtnStr)
llCount = 0
llCount = InStr(1, lsRtnStr, "-")
If llCount > 0 Then
lsRtnStr = Right$(lsRtnStr, 1) & Left$(lsRtnStr, (Len(lsRtnStr) - 1))
End If
CompToStr = lsRtnStr 'Return the hex string.
End Function
__________________________________________________ ___________________
Public Function Convert_Date(ByRef ls_sdate As String) As String
'incoming date
Dim ls_scent
, ls_smonth, ls_sday, ls_syear As String
ls_scent = Left(ls_sdate, 1)
ls_syear = Mid(ls_sdate, 2, 2)
ls_smonth = Mid(ls_sdate, 4, 2)
ls_sday = Right(ls_sdate, 2)
If (ls_sday = "00") Then
ls_sdate = "0000"
ElseIf (ls_scent = 0) Then
'ls_sdate = ls_smonth & "/" & ls_sday & "/" & "19" & ls_syear
ls_sdate = "19" & ls_syear & "/" & ls_smonth & "/" & ls_sday
ElseIf (ls_scent = 1) Then
'ls_sdate = ls_smonth & "/" & ls_sday & "/" & "20" & ls_syear
ls_sdate = "20" & ls_syear & "/" & ls_smonth & "/" & ls_sday
End If
Convert_Date = ls_sdate
End Function
__________________________________________________ ____________
View 1 Replies
View Related
Oct 13, 1999
Hi,
I have a table with datetime field in SQL server 7.0
I have inserted values into datetime field
for eg: '10/10/99'
'10/10/99 10:30 AM'
'11/10/99 11:50 PM'
When I view this table from enterprise manager, values are shown exactly
in the same format I have entered.
But, When I run the query from Query Analyzer, It always shows values in the following format '1999-10-10 00:00:00.000'
Is there a way that I can see the values in the same format I have entered.
Help !!!
Thanks
View 1 Replies
View Related
Jun 22, 2004
Hi,
I have a datetime field that store data in format like this following format:
2003-05-25 13:01:39.400
How can I change the format of the of the datetime to 13:01:39.400 only.
Thanks
View 1 Replies
View Related
Sep 11, 2004
Hello, everyone:
My table has a column that is DATETIME data type. The original format likes "1/21/2004". I want to check data lengh. However when I read the data by SELECT, SQL Server change the format to "Jan.-21-2004" automatically. Does any one has an idea to keep original datetime format? Thanks.
ZYT
View 1 Replies
View Related
Feb 15, 2005
Is there any standard function for inserting datetime values to an sql table. I'm having a problem because some operating systems are in english and some operating systemes are in spanish.. When I insert a value '2005-02-15 12:00:00' it works on the english operating system, but it doesn't in the spanish one... any ideas?
View 11 Replies
View Related
Apr 9, 2008
Hello
I'm hoping someone can help explain why when i select timestamp field
2008-03-25 18:57:39.000 the view result changes to
04-04-2008 11:12:01 AM.
I need result of view to be in same format as table.
Thanks
Fred
Fred
View 17 Replies
View Related
Apr 6, 2007
On displaying data in the gridview with sqldatasource in asp.net C# 2005 on the datetime datatype field i want to display only the date but it displays the time also on each and every row.
On the money datatype field i want to display the roundoff amount or with decimal upto 2places like 12,000.00 which is shown as 12,000.0000...
I have seen the same question in previous topic also but don't got it so asking in my post...
Pls tell me some format to avoid this invalid data.
Thanxs in advance and waiting for ur response.
View 3 Replies
View Related
May 31, 2007
how to change datetime format.
i want to store datetime in my table as yyyy-mm-dd.
can it be done??
View 3 Replies
View Related
