Hi,
Hope someone can help... :)
I have installed SQL Server 2000 and SQL Reporting Services 2005... gone thru the setup process and i am unable to initialize via Reporting Services Configuration.
When i attempt to deploy a report or just browse //<server>/reports i get the following error...
Keyset does not exist (Exception from HRESULT: 0x80090016) (rsRPCError)
All advise welcomed
Cheers
I get this error when trying to deploy a report from VS2005, when trying to get to the report manager page, when trying to do anything in SSMS with the report server.
Keyset does not exist (Exception from HRESULT: 0x80090016) (rsRPCError) (Microsoft.ReportingServices.Diagnostics)
Can anyone give me a clue what to do?
Hi, there;
I created a SSIS package in a ASP.NEP application which importing data from some .dbf file. "Exception from HRESULT: 0xC0048004" happened to two tables. I had a look this exception at http://msdn2.microsoft.com/en-us/library/ms345164.aspx, it says: The index is not valid. But there is no index defined in my destination table.
Does anybody how to resolve it?
Thanks
Dear Group,
we recently installed the sourceforge forum system on our server (MS SQL 2005) and were excited how well it worked.
However, after the most recent MS update, and using the compiler Visual Webdeveloper Express, we are suddenly receiving the error message:
"An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)"
Can you help us?
Many thanks,
Robert "Bobby"
I created a packsge, set up a connection and the connection is tested OK. Then I created a OLE DB Source, gave the created connection and a table. When I click "Preview" button, this is what I got:
Error at DTStask_DTSDataPumpTask_3(OLE DB source[1]): An error occured due to no connection. A data connection is required when requesting metadata.
Additional informatin:
Exception from HRESULT 0xC0202022: (Microsoft.Sqlserver.DTSPipelineWrap)
Please tell me what I did wrong? or have I broken something?
hi all,
I am using SSIS package to transfer data from 4 tables of one Server to another server(Using SQLConnection).
All works fine while runinng in Debug mode.
But while running the application(Which calls SSIS and creates Pacakage),it is creating only one package instead of creating 4 and resulting in error.
"Exception from Hresult:0xc0202009"
Please help me to solve this issue.
Thanks in advance,
Sangeet
Hi,
I write a custom component (destination component) that handle the error of my dataflow.
The custom component works fine on design time and runtime by using BIDS.
When I'm using the same package that use my custom component with DTEXEC,
I got the following error :
System.Exception: AcquireConnections : Exception from HRESULT: 0x80131904
at SSISGenerator.SSISErrorHandler.ErrorHandlerDestination.AcquireConnections(
Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnectio
ns(IDTSManagedComponentWrapper90 wrapper, Object transaction)
The error message point out that the problem is in acquireconnections method.
This is the code i'm using in my custom component for the acquireconnections method.
public override void AcquireConnections(object transaction)
{
try
{
if (ComponentMetaData.RuntimeConnectionCollection[0].ConnectionManager != null)
{
ConnectionManager cm = Microsoft.SqlServer.Dts.Runtime.DtsConvert.ToConnectionManager(ComponentMetaData.RuntimeConnectionCollection[0].ConnectionManager);
ConnectionManagerAdoNet cmado = cm.InnerObject as ConnectionManagerAdoNet;
if (cmado == null)
throw new Exception(String.Format(MSG_ACQUIRECONNECTIONS_ADONET,cm.Name));
this.sqlConnection = cmado.AcquireConnection(null) as SqlConnection;
if (this.sqlConnection == null)
throw new Exception(String.Format(MSG_ACQUIRECONNECTIONS_ADONET, cm.Name));
if (sqlConnection.State != ConnectionState.Open)
this.sqlConnection.Open();
}
}
catch (Exception e)
{
throw new Exception(MSG_ACQUIRECONNECTIONS + e.Message);
}
}
Does someone got an idea ?
Mathieu
Hello,
I am having problem while bulding my C# project in Visual Stodio
Error acures at this stroke of the code:
Engine = new SqlCeEngine(ConnectStr);
and the error is: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
any one had such problem before?
programm is running under Vista 64bit.
thnx
Hi All,
I have created SSIS package which will refresh cubes daily. Actually i am using IBM db2 provider since ETL table and SSAS 2005 are resides in IBM db2 database.
I have a scenerio where i will update lastprocessedtime in this ETL table once my cubes get processed. So i am using SQL Execute TASK for this operation. Here in SQL STATEMENT i am using update statements. when i click parse query, I am getting error like "SQL TASK : Exception HRESULT: 0xC0202009".
Can anyone tell me what might be the problem?
Thanks in advance,
Anand Rajagopal
Where can i get the full error when viewing the report in visual studio...
"An unexpected error has occurred (Exception from HRESULT: 0x800300FD (STG_E_UNKNOWN))
This seems strange.. I am using a cube.. and the second I drag certain field to the grid in the query designer it crashes. When I take that field out its fine.. in my report I have NOTHING. just an empty report with a dataset.
please help.. urgent!
Regards,
Neil
I am trying to access a SQL 2005 database on a seperate machine, using a COM+ proxy which is installed on my machine. I keep getting this error:
View 5 Replies View Related
I'm new to ADO.NET and need help with this error.
Currently running Vista Home Premium 64 and Visual Studio 2008 Trial.
1. Create Win form app.
2. Add new data source...
3. New connection - SQL Server Compact 3.5 - Northwind.sdf
4. Highlight Products and Suppliers.
5. Drag both onto Win form
6. Run with debug
7. Error message "Unable to load DLL 'sqlceme35.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)"
some blogs advice change dir in SQL Server Compact 3.5 in regedit but regedit doesn't even have SQL Server Compact 3.5; only SQL ServerSQLExpress.
reinstall SQL Server Compact 3.5 and problem still exists.
anyone knows how to fix this problem?
i have restored site using stsadm, site get successfully restored.
all user of the site able to access the site but the unable to access from same machine on which it is restored.
i got the error
The file exists. (Exception from HRESULT: 0x80070050)
hI all,
I have sql server 2000 installed on one machine running
windows server 2003 and using VS 2003 to code and run IIS 5.0 on
another machine running windows XP.
I'm getting the error: sql exception: SQL Server does not exist or
access denied. But i tried using osql to connect to the sql
server from the XP machine and it works fine!
Can someone pls help me and tell me why i get this error for my webapp
but i can connect to the sql server with osql? Thanks in Advance
hi
i'm trying to install sql server 2005 standard reporting services, the sql part is installed sucessfuly, i am stuck with the reporting services part, when i enter the URL for both the reporting service, and the report manager, i get the error :
the system cannot find the file specified. (Exception from HRESULT: 0x80070002) (rsRPCError)
does this sound familiar to anyone, let me know if i need to post more detail.
thanks
Ben.
Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'
My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg
Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.
Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg
Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.
private void lnkFavoriteAccount_Click(object sender, EventArgs e)
{
FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();
account.Name = "MyBank Checking Account";
account.AccountType = "Checking";
account.Balance = Convert.ToDecimal("15.03");
account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.
financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.
this.bankAccountTableAdapter1.Update(financesDataSet);
this.financesDataSet.AcceptChanges();
refreshDatabase();
}
the refreshDatabase() code is here:
private void refreshDatabase()
{
this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);
//Aquire a count of accounts the user has
int numAccounts = financesDataSet.BankAccount.Count;
//Loop through each account and see which one is the primary.
for (int num = 0; num != numAccounts; num++)
{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
{
//Display the primary account on our home page. User can click the link label & be taken to their account register.
this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();
this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();
break;
}
}
}
and my form_load code
private void frmMain_Load(object sender, EventArgs e)
{
refreshDatabase();
}
So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer
[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]
public byte FavoriteAccount {
get {
try {
return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));
}
catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'
throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);
}
}
set {
this[this.tableBankAccount.FavoriteAccountColumn] = value;
}
}
I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
in my refreshDatabase() method it still failed.
When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?
Thanks for any help you guys can offer.
Johnathon
Hi,
I got an strange problem with one of my packages.
When running the package in VisualStudio it runs properly, but if I let this package run as part of an SQL-Server Agent job, I got the message "The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown." on my log and the package ends up with an error.
Both times it is exactly the same package on the same server, so I don't know how the debug or even if there is anything I need to debug?
Regards,
Jan
I have data as below: select ID,code,go,back from tableA
ID code go back
2 C US UK
2 A UK US
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
I only want to pull out whole ID group which code Z exist. I tried as below:
select ID,code,go,back from tableA A
where exists
( select ID,go,back
from tableA B with (nolock)
where A.ID = B.ID
and A.code='Z')
But it only appear:
ID code go back
1 Z UK US
How can I appear with the group as well?
ID code go back
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
We have a SSIS package that intermittently fails on the deployed server (works fine on our dev server) with the following error:
"The variable "%1!s!" is already on the read list. A variable may only be added once to either the read lock list or the write lock list."
This seems to happen right at the start when the variables are processed before any tasks happen. It also only fails half the time.
I just don't even know where to begin. Any clues?
Hai all,I am getting an DB_E_ERRORSINCOMMAND exception when I try to open arecordset or execute query in VC++. But when I run the same query inQuery Analyzer, it is working fine. I am sure the connection string iscorrect. I am running a collection of queries and finally commit thetransaction, but everytime it not throwing the exception on same query,eachtime different queries throw exception randomly.Can anyone tell whats the problem?Urgent, Please help...Looking forward for the response..Thanx in advance...
View 3 Replies View RelatedHi,
I have a dump file retrieved from SqlServer 2000. The file name reads something like this: concorde_db_dump.200706070105
I have been trying to import it to SqlServer 2005 but always receiving this message:
Not enough storage is available to process this command.
(Exception from HRESULT: 0x80070008) (mscorlib)
The error details are as follows:
Program Location:
at
System.Runtime.InteropServices.Marshal.ThrowExceptionForHRIn
ternal(Int32 errorCode, IntPtr errorInfo)
at
Microsoft.SqlServer.Management.UI.VSIntegration.Editors.Scri
ptFactory.ProcessDroppedFilesAsyncInternal(StringCollection
filesToOpen)
Does anyone know what's wrong? Thanks!
From a couple of days I have a strange and annoying problem on my development machine. Every time that I try to use the Import/Export wizard in the Management Studio I receive the error HResult E_Fail error refererencig to the dtsruntimewrap.
If I try to open a SSIS package and to check the setup of the connection I receive instead a message stating Could Not Edit OleDB Connection, error E_FAIL(0x80004005). (System.Data)
What can I do to fix this problem?
Thank you
I guess this may not strictly be a CLR integration question, because what I'm actually doing is using sp_OACreate in a T-SQL batch to call a COM object written in C#. Not as nice as using full CLR integration, but unfortunately the T-SQL must run without error on a SQL 2000 server before it is upgraded to 2005, and I preferred this option to using reams of dynamic SQL.
The first call to sp_OACreate fails with hRes 0x80131022. MSSQLServer also logs the following error to the app event log:
"Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x80131022. You may fix the problem and try again later."
Please can anyone suggest why this is happening? I've tried repairing the .NET framework (v2) installation, and reinstalled SQL Server Express. I've double checked both CLR integration and OLE Automation are allowed in the Surface Area config tool for SQL Express. I've tried running SQL Express using both LocalSystem and the administrator account on the machine. I've even checked there is plenty of free memory (including virtual memory). Nothing has helped though.
Thanks in advance for any help or suggestions you can provide,
Rob
Hello all,
I have a branch a data, now i need to search through a database to check whther it is exist in that database or not, any syggestion?
Example:
Now i have data 123, 234, 345. Let say data 123 and 234 is exist in that database, but data 345 is not exist in that database.
What SQL am i suitable to use to get those result exist(123, 234) and those result not exist (345)?
The database structure is someting like this:
ID NAME O_NAME
-- ----- --------
1 120 123
2 234 234
3 345 345
1) The data consider 'exist' if it exist in column NAME or column O_NAME (either one).
2) The data consider 'not exist' if it not exist in neither NAME column nor O_NAME column
After the SQL query, someting is expected:
Exist:
ID NAME O_NAME
-- ----- --------
1 120 123
2 234 234
Not Exist:
ID NAME O_NAME
-- ----- --------
3 345 345
I'll appreciate if anyone can provide me a solution..Thanks!
I guys,
I have this store procedure which does a bulk insert to a session table from a XML file. This store procedure used to work fine until couple of month ago and now all of the sudden it stopped working. Whenever this procedure is executed I get following error:
Msg 6511, Level 16, State 82, Procedure up_XNetSessionBulkInsert, Line 42
Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x8007000e. You may fix the problem and try again later.
I also tested same procedure on the development sql server and it works fine. the settings on the production and development are same.
I was wondering if any of you have a solution for it. Here is the procedure which causes error.
dbo.up_SessionBulkInsert '<sessions><s id="6" val="45465465" len="9" /></sessions>'
ALTER PROCEDURE [dbo].[up_SessionBulkInsert]
(
@sessionXml text
)
AS
SET NOCOUNT ON
declare @handle int
exec sp_xml_preparedocument @handle output, @sessionXml
INSERT INTO SessionTb
(
sessionID
,session
,length
)
SELECT
sessionID
,dbo.udf_DecodeBase64StringToBinary(session) as RawBytes -- Base64-decode to byte[] before we insert.
,length
FROM
OpenXml(@handle, '/sessions/s', 1)
WITH
(
sessionID varchar(88) '@id'
,session varchar(max) '@val' -- This value should be a base64-encoded string
,length int '@len'
)
select @@rowcount
exec sp_xml_removedocument @handle
SET NOCOUNT OFF
What is the cause of this failure to install (Microsoft SQL Server 2005 9.00.3042.00 fetched from http://download.microsoft.com/download/1/5/8/15840bb5-30d9-4ba2-b6bd-32424d22f0f9/SQLEXPR_ADV.EXE) :
Code Snippet
Machine : DX5150
Product : SQL Server Management Studio Express
Error : An error occurred during the installation of assembly 'msddsp,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.0.0",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x80070020.
--------------------------------------------------------------------------------
Machine : DX5150
Product : Microsoft SQL Server Management Studio Express
Product Version : 9.00.3042.00
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_DX5150_SSMSEE_1.log
Last Action : InstallFinalize
Error String : An error occurred during the installation of assembly 'msddsp,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.0.0",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x80070020. assembly interface: IAssemblyCacheItem, function: Commit, component: {FB603825-921B-4781-9FF3-1B1800281E29}
Error Number : 1935
I have an OLE-DB Command transformation that inserts a row. If the insert SQL command fails for some reason, I use the "Redirect Row" option to send the row to another OLE-DB Command transformation that logs the error on that row to a "failed rows" table. In this table I log the ErrorCode and ErrorColumn values that come with the error path from the first OLE-DB Command.
OK, that's all working great. However, here's the kicker: there's no error description value. The ErrorCode value, naturally, is the decimal form of an HRESULT--for example, -1071607696. Without some further information, however, this code is not useful for troubleshooting.
Has anyone figured out a trick here? I'm not even certain that this is an SSIS HRESULT, since it could for all I know be from the OLE-DB layer, the database layer, or somewhere else.
Thanks,
Dan
hi,
I'm working on "MERGE REPLICATION"...i followed the procedure same as the book
"SQL SERVER CE DATABASE DEVELOPMENT WITH the .NET COMPACT FRAMEWORK"Author Rob Tiffany, ch9,10
i got one error msg that..."a request to send data to the computer funning IIS failed,for more information seeHRESULT " ..When my program hits rep.Syncronize()...
here my codes
\\\\\\\\\\\
rep = New SqlCeReplication
rep.InternetUrl= "https://seawolf/fieldagentrda/sscesa20.dll"
rep.InternetLogin = "robtiffany"
rep.InternetPassword = "pinnacle"
rep.Publisher = "seawolf"
rep.PublisherDatabase = "IntelligenceData"
rep.PublisherLogin = "sa"
rep.PublisherLogin = "apress"
rep.Publication = "IntelligenceDataPublication"
rep.Subscriber = "subscriber"
rep.SubscriberConnectionString="Datasource=My Documents" & _"IntelligenceData.sdf;" & _ "SSCE:Database Password=apress"
If File.Exists("MyDocumentsIntelligenceData.sdf") Then
rep.Synchronize()
Else
MessageBox.Show("You must first create a database", "Error")
End If
\\\\\\\\\\\\\\\\\\\
can anyone help me ,how to solve this issue?
Thanks in advance
I'm working on developing a C# application using an SSIS package. I'm using the code example from BOL: "Adding and Configuring a Component". When I run the sample I get the above error. This could be one of several things, including:
View 7 Replies View RelatedI am modifying the aplication to visual.net from visual studio 2005 but I have problems ( in this moment i working in my pc , with sql 2000 personal ,windows xp , sql mobile and pc pocket emulator for window ce 5.0)
I don't know but i can't make the Pull in the server.
1) the http://localhost/driver2005/sqlcesa30.dll?diag is correct
2) I don't have the windows firewall
3)the anonimous user have all the permition in the virtual directory..
Where is the error ?
Thanks
hello all
i m getting the following error while exporting an excel file in SSIS
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
is this a bug?
pls suggest a workaround.
Has anyone seen this error? It comes up when my app executes a select statement via linked server (from MSSQL 2000 to 2005) the second time it runs. It's basically a timed poll of tables in the remote database. It works once but the second time it executes I get the error from the remote db, it's just a select but I guess the cursor is still open so it can't run again. After the exception the select will run again, once and it just repeats. I have researched it a little and it looks like it mostly has to do with the isolation level of the transaction. Unfortunately based on the componet being used to access the database I don't beleive I have the ability to use transact SQL to call the isolation level (s) listed.
Here's the weird part though, at another site the same scenario is running fine. Same primary and remote db versions of MSSQL as well as the application and it runs fine. I guess my question is what type of setup parameters that may be defined in MSSQL 2005 for the remote database might make it behave in this manner in one instance and not the other? TIA in advance for any thoughts/assistance.
DT
i get the following exception HResult -2146233088
[Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException] {"No description found"} Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException
when i try to use this following code snippet
try
{
ConnectionManager objOLEDBConnection;
Microsoft.SqlServer.Dts.Runtime.Package objPackage = new Microsoft.SqlServer.Dts.Runtime.Package();
objOLEDBConnection = objPackage.Connections.Add("OLEDB");
}
catch(Exception ex)
{
ex.Message ;
}
could you please help me out with this ?