My database .mdf file size is around 6 GB however .ldf file size is 200 GB.
Though I don't know exactly what .ldf file is, I believe maybe that is the reason why some of the stored procedures taking long time to run which were running good before.
Can I delete the .ldf file? If not, can I do something to reduce the file size?
The database (tables) are also replicated to another sql server in another computer.
Hi!
I'm using SQL Server 2000!
How to know then Data files size and Log files size by Store Procedures or Sql query?
Thanks!
Hi,
I want to retrive the images from SQL database and store into microsoft access database.
But only images file which is <than 500mb is allowed to retireve.How can i get the images files size if i just store the image file name into my sql database.(there is another folder to store images)
p@ywen.
I need to know how big SQL Server 7 backup files are in comparison to the database size. For example if I have a database that is 300 Mb and I do a complete backup to disk with SQL Server 7 will the backup file be about 300 Mb?
Thanks,
Mike
I have a 24gig DB that has 1 data file.
Is it possible to RESTORE the backup to a DB that has 2 files
(1 = 10gig 2 = 14gig).
Does one of the files on the the DB have to be at least 24gig to RESTORE?
hi
just wondering if any expert out there can answer my question.
i got a database separate into 3 datafiles in 3 different drives.
i will name it A, B, C.
A datafile size 30G, B datafile size 15G, C datafile size 15G.
and the drive for datafile A is about full. so is there anyway i can more some of data from A datafile to other data file? or since A+B+C =60G can i make it all 20G for each one of them by any command? thanks!!! :)
Hi All,
I need to create a brand new db in prod and I was wondering if anybody has any recomendations for initial .mdf, .ndf, and .ldf file sizes.
Thanks.
Hi All,I want to shrink a transaction log using :USE MasterBACKUP Log test WITH truncate_onlyUSE testDBCC shrinkfile(test_log, 0)These commands will be executed from a workstation.After shrinking, I want to see the size of thetransaction log and database files. But, I do notknow what command should I use.Could anyone help me ?Thanks in advanceJohn S.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedI am wondering why deployed packages are so much smaller than built packages. What is removed and why isn't it removed when the packages are built?
I have a package that goes from 3Mb to 1.5Mb
I would like to add to it the actual file size in mb or gb of each file to the results.
select sd.name,mf.name as logical_name,mf.physical_name,
case
when dm.mirroring_state is null then 'No'
else 'Yes'
end as Mirrored
from sys.sysdatabases sd JOIN
sys.master_files mf on sd.dbid = mf.database_id
join sys.database_mirroring dm on sd.dbid = dm.database_id
The sp_spaceused procedure does a nice job on it's own giving me what I want (only one db though), plus a bonus allocated space column. How can I combine this sp with my other query, or is there a better way to ad this information?
Due to SQL's proportional fill algorithm I'd like to have the amount of data in my data files as close to equal as possible.
File sizes before:
dat 482,895 MB 0% free
2dat 436,927 MB 3% free
I made the max size of each file 600,000 MB and added a third file 3dat also 600,000 MB. I rebuilt all the clustered indexes (and nonclustered for good measure) and unfortunately the re-balancing wasn't quite right.
File sizes after:
dat 464,761 MB 77% free
2dat 443,234 MB 73% free
3dat 309,568 MB 51% free
I only have a handful of heap tables that take up <100MB total so they're not the issue. I did do an ONLINE index rebuild. I'm not sure if an offline rebuild would have been better. I will not be able to try and offline for a few weeks though as it's time consuming and I have other tasks I need to run on this test server now.
I did a FULLSCAN rebuild on any column statistics not updated by the index rebuild but that didn't help either.
I am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria? I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!?
View 4 Replies View RelatedI have a client with no backup of MASTERdb or Help_rev_devices, all I have is a couple of .dmp's of the production data. In order to run DISK REINIT I need to know the size of the database, is there any way of finding out the size of the database device, if all you have to go with is a backup dump file?
I know it won't be pretty.
`Ken
Any good starting point to understand for a specific db, how many max VLFs are good to have so that it does not cause long startup or backup times?
Also, I need some calculation so that I can identify a best growth parameter I will setup for each database ?
I'm seeing the below msg in errorlog and curious to know the changes (right sizing/growth) to be done? As of now 100 MB of log file growth value is set (refer: [URL] ....)
Database BizTalkMsgBoxDb has more than 1000 virtual log files which is excessive. Too many virtual log files can cause long startup and backup times. Consider shrinking the log and using a different growth increment to reduce the number of virtual log files.
Hi,I am new to SQL express and try to solve the 4GB size limitation.Is there a possibility to create a new database file every time I getto the limit?How can I do that with C#? how can I create new database file everytime it gets full?Can I be connected to two database files at the same time (the full dband the new db)?thanks in advance,oren
View 1 Replies View RelatedI am trying to trace few events using profiler Via T SQL like below,  the below scripts works fine, but once the file reaches 1GB , it is not rolling over to another file and start trace again.I tried using URL...once it reaches max file size provided between the time interval..
declare @rc int
declare @TraceID int
declare @maxfilesize bigint
declare @DateTime datetime
set @DateTime = '2015-08-18 Â 16:00:00.000'------Stop Time 4 PMÂ
set @maxfilesize = 1024 Â --1GB max File sizeÂ
[code]...
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString)); dataSource .CommandType = CommandType.StoredProcedure; dataSource .Parameters.AddWithValue("id", poid); dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData] @id int, @title varchar(50) OUTPUT, @creator varchar(50) OUTPUT, @assignee varchar(50) OUTPUT, @contact varchar(50) OUTPUT, @deliveryCost numeric(18,2) OUTPUT, @totalCost numeric(18,2) OUTPUT, @status tinyint OUTPUT, @project smallint OUTPUT, @supplier smallint OUTPUT, @creationDateTime datetime OUTPUT, @amendedDateTime datetime OUTPUT, @locked bit OUTPUT AS /**SET NOCOUNT ON; **/ SELECT [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee], [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost], [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked] FROM purchase_orders WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:
Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies View RelatedI have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies View RelatedI want to know encrypted data's size for designing database field size.
For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.
I think the size does not depend to PassPhrase char length.
Regards,
Yoshihiro Kawabata
I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter.
ExecuteNonQuery statement is called using SqlHelper.
Error : String[18]: the Size property has an invalid size of 0
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?I realize there are a myraid of factors that go against file size but a general starting point would be nice.ThanksJeff--Message posted via http://www.sqlmonster.com
View 4 Replies View RelatedThe Tabular model is showing 19 GB on disk, but it is acquiring around 40 GB in memory.
View 3 Replies View RelatedHi,
An MSSQL DB running SAP indicates a smaller DB size (MMC & SAP) than the actual physical size. The difference is about 8 GB.
A lot of records were deleted before this. Did they remain in the DB as NULL values or something ?
Does anyone know what the reason for this could be ? And how to clean this up ?
Thanks in advance,
Paul
Hi,
i use this script that show me the size of each table and do the sum of all the table size.
SELECT
X.[name],
REPLACE(CONVERT(varchar, CONVERT(money, X.[rows]), 1), '.00', '') AS [rows],
REPLACE(CONVERT(varchar, CONVERT(money, X.[reserved]), 1), '.00', '') AS [reserved],
REPLACE(CONVERT(varchar, CONVERT(money, X.[data]), 1), '.00', '') AS [data],
REPLACE(CONVERT(varchar, CONVERT(money, X.[index_size]), 1), '.00', '') AS [index_size],
REPLACE(CONVERT(varchar, CONVERT(money, X.[unused]), 1), '.00', '') AS [unused]
FROM
(SELECT
CAST(object_name(id) AS varchar(50)) AS [name],
SUM(CASE WHEN indid < 2 THEN CONVERT(bigint, [rows]) END) AS [rows],
SUM(CONVERT(bigint, reserved)) * 8 AS reserved,
SUM(CONVERT(bigint, dpages)) * 8 AS data,
SUM(CONVERT(bigint, used) - CONVERT(bigint, dpages)) * 8 AS index_size,
SUM(CONVERT(bigint, reserved) - CONVERT(bigint, used)) * 8 AS unused
FROM sysindexes WITH (NOLOCK)
WHERE sysindexes.indid IN (0, 1, 255)
AND sysindexes.id > 100
AND object_name(sysindexes.id) <> 'dtproperties'
GROUP BY sysindexes.id WITH ROLLUP) AS X
ORDER BY X.[name]
the problem is that the sum of all tables is not the same size when i make a full database backup.
example of this is when i run this query against my database i see a sum of 111,899 KB that they are 111MB,but when
i do full backup to that database the size of this full backup is 1.5GB,why is that and where this size come from?
THX
Here are my scenarios:
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
I proposed on a new server that we separate Data Files, Log Files, tempDB, Backups, etc. onto separate LUNS on a SAN with High Speed Solid State Drives.I was told that with the new technology with solid state SAN's that it would decrease performance and that it did not work the same way as it did when you had RAID 5's etc.I thought that if things were cared out correctly by a SAN Administrator they would know how to configure for optimal performance.
View 2 Replies View RelatedIn the For Loop, How to Iterate from Older flat files to Newer flat files based on File's Timestamp. If there are some older files in that folder, it should be processed first and then continue with the newer one.
Any Suggestions?
In the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this:
1. If no file(s) found, stop executing and send email saying no file(s) found;
2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1:
----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.VisualBasic.FileIO.FileSystem
Imports System.IO.FileSystemInfo
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String
Dim cFileType As String
Dim cFileFlgVar As String
WriteVariable("SCFileFlg", False)
WriteVariable("OOFileFlg", False)
WriteVariable("INFileFlg", False)
WriteVariable("IAFileFlg", False)
WriteVariable("RCFileFlg", False)
cDataFileName = ReadVariable("DataFileName").ToString
cFileType = Left(Right(cDataFileName, 4), 2)
cFileFlgVar = cFileType.ToUpper + "FileFlg"
WriteVariable(cFileFlgVar, True)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object)
Try
Dim vars As Variables
Dts.VariableDispenser.LockForWrite(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
vars(varName).Value = varValue
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
End Sub
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
End Class
example for step 2:
-------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
'Set the properties like username & password
cm.Properties("ServerName").SetValue(cm, "ftp.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0") 'The 0 setting will make it not timeout
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
'create the FTP object that sends the files and pass it the connection created above.
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
'Connects to the ftp server
ftp.Connect()
'ftp.SetWorkingDirectory("..")
ftp.SetWorkingDirectory("directoryname")
Dim folderNames() As String
Dim fileNames() As String
ftp.GetListing(folderNames, fileNames)
Dim maxname As String = ""
For Each filename As String In fileNames
' whatever operation you need to do to find the correct file...
Next
Dim files(0) As String
files(0) = maxname
ftp.ReceiveFiles(files, "C: emp", True, True)
' Close the ftp connection
ftp.Close()
'Set the filename you retreive for use in data flow
Dts.Variables.Item("FILENAME").Value = maxname
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I have the need to delete old backup files via TSQL job. Found this solution online:
PushD "
emoteservershareDIFF" &&(
forfiles -m *DIFF*.sqb -d -1 -c "cmd /c del /q @path"
) & PopD
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
It is possible to find table size and in that table each row size.
View 4 Replies View Related