LITTLE HELP WITH SQL SERVER EXPRESS CONFIGURATION.
Dec 9, 2006
Hello, I can't resolve the following problem, I think it is a very stupid task, but I can't find it:
0. I need to access to SQL dbs through jdbc from my java application. Before to create java I did as follow:
1. I installed SQL Server Express
2. I created a user with password (SQL authentication)
3. I set both Windows e SQL authentication in surface area cfg
4. I set only TCP/IP remote connections
5. I set specific port 1433 in the protocols tcp in "All IPs"
6. I can't connect through sqlcmd or osql.
7. I CAN connect through SQL Server Manager studio or how hell it is called!
The error is (I have italian version, so I try to transalte for you):
say user id is cometk and pass is 123
c:>sqlcmd -U cometk
Password: HResult 0x4818, level 14, state 1
Login failed for user 'cometk'.
HResult 0x2746, level 16, state 1
Provider TCP: Connection interrupted from the remote host
slqcmd: error: Microsoft SQL Native Client : connection error while communicating.
Can anyone help me? Can anyone guide me to configure SQL Server to make remote connections? :)
Hi!I have installed Sql Server 2005 Express on my machine. I want to access this server from another machine in LAN.Also installed Sql Server 2005 on another machine. Allow Remote Connections is selected with Sql Server Surface Area Configuration.Please suggest the correct solution. (in detail) Thanks in advancemilind
how to configure sql express 2008 R2 on windows server 2008 R2 domain controller?? and one more thing, what log on should I use for sql express service in sql server configuration manager on domain controller??
Hello. I am called Narsiste. I have a problem of configuration in SQL server 2005 express train. In fact, I do not know how to make the configuration to tackle the databases SQL server 2005 express train which are on a station has starting from a station B (both being in a network LAN). But I read in the module of €œconfiguration of the surface of exposure for the services and connections - localhost€? that €œBy defect, the editions Express train, Evaluation and Developer SQL SERVER 2005 authorize only local connections.€?. As it is BY DEFECT, I said myself that it will have to be changed a parameter so that access TCP/IP can go on this version of SQL SERVER.
Here is the message which I have: €œAn error occurred during the establishment of a connection to the waiter. At the time of connection to SQL Server 2005, this failure can be due to the fact that the default settings of SQL Server do not authorize remote connections. (Provider: Interfaces network SQL, error: 26 - Error during the localization of the waiter/the authority specified) (Microsoft SQL Server, Error: -1)€?.
If somebody encountered this problem in the past, that he wants to inform well me of the solution which he found for this last. Thank you.
I have problem during first configuration of Reporting Services from MS SQL 2005 Server Express with Advanced Services SP2. The error occurs when configuring virtual directory (Reporting Services Configuration Manager -> Report Server Virtual Directory). When I try to create new virtual directory I can see following messages:
Number of errors: 0 Create Virtual Directory
The virtual directory was created and assigned. Changing Secure Connection Level
After last message Windows reports that SQL Server 2005 Reporting Configuration Tool has encountered a problem and needs to close (and I can send report to Microsoft).
IIS shows that virtual directory under default web site was created.
My environment: MS SQL Reporting Services Version 9.00.3042.00 Windows XP Proffessional SP2 IIS 5.1 all components are fresh new installations. The only additional configuration I've made was adding IWAM_<hostname> as WebServiceAccount, all other configuration is default.
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
I am deploying a new website (hosted at Godaddy.com) and want to take advantage of some of the power VWD 5005 offers. Specificaly the 'ASP.NET Configuration' under the 'Website' menu item. How do I go about using the ASP.NET Configuration on a site that is hosted? Is it possible? I want to be able to add new rolls, create some users manually and set permissions on directories. If I cant use ASP.NET Configuration how do i go about this task in a hosted environment. My host is GoDaddy.com
Hi I installed on my XP machine iis and, SQL express and visual web developer. now I need to configure the right parameters in the web.config file. (it was easy on SQL2000) can anyone explain how to configure the web.config (in DNN 453) ?<!-- Connection String for SQL Server 2005 Express --> <add name="SiteSqlServer" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Database.mdf;"providerName="System.Data.SqlClient" /><!-- Connection String for SQL Server 2000/2005 <add name="SiteSqlServer" connectionString="Server=(local);Database=DotNetNuke;uid=;pwd=;" providerName="System.Data.SqlClient" />--> </connectionStrings><appSettings> <!-- Connection String for SQL Server 2005 Express - kept for backwards compatability - legacy modules --><add key="SiteSqlServer" value="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Database.mdf;"/><!-- Connection String for SQL Server 2000/2005 - kept for backwards compatability - legacy modules <add key="SiteSqlServer" value="Server=(local);Database=DotNetNuke;uid=;pwd=;"/>
While trying to "Set Configuration Database Server" for Windows SharePoint Services I receive the error: "Cannot open database "SharePoint" requested by the login. The login failed. (Error code: 4060)"
I set up a test bed server 'SNET' with WinServer03 SP1, IIS 6. SQL Server Express, and SharePoint Services.
In "Set Configuration Database Server" I used: Database server: snetsqlexpress SQL Server database name: SharePoint (I know real imaginative) Database connection type: * Use Windows authentication X Connect to existing configuration database.
If I try "Use SQL Authentication" "Login failed for user <username>. The user is not associated with a trusted SQL Server connection. (Error code: 18452)"
First let me say that while I'm not a newbie, as usual I've bitten off more than I can chew comfortably. Server '03, Active Directory, IIS 6, SQLExpress, and SharePoint are all relatively new to me, hence the test bed server, and I'm on a pretty steep learning curve.
But what's life without a challenge.
So the short and sweet of it is can somebody point me in the right direction to find the root cause of this error. I do have other programs running with this instance of SQLExpress and doing so quite happily. And I've given myself god privileges in AD just to try to get around this.
I'm having issues with my sql server 2014 express configuration manager. I need to change protocols under Sql Server Network Configuration but there is nothing, no protocol listed, its empty.
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
USE [ETLConfiguration] GO /****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[SSIS Configurations]( [ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL, [PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL ) ON [PRIMARY]
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
What is the Difference between the SQL Server Express Bundled with C#/VB VS the downloadable SQL Server Express SP1 with advanced Services?
I installed C# with SQL Server Express, however I wanted to add the Full Text Searching and the SQL Server Management Studio Express, so I downloaded and installed the SQL Server 2005 Express Edition with Advanced Services SP1. When I installed it over top of my current installation, it complained of version mismatching, and then C# failed to recognize that I had SQL 2005 Express installed at all.
What I'd like to know is, which version is more current (they have to be different, they had different version numbers, one was 9.xx.xxxx the other was 2005.9.xx.xxxx) The one bundled with C#, or the SP1 downloadable one.
Firstly, I want to be up todate as far as security patches, and Secondly, how do I add the full text searching and SSMSE to the one bundled with C# without breaking it.
Q1: Does Sql Server 2005 Express support Web/Internet to other SQL Server 2005 Express Clients or does it have to Synch across the internet to a fully installed setup SQL Server 2005 with IIS?
Q2: Does SQL Server 2005 Express support Direct Replication between other SQL Server 2005 Express clients?
hi ; everybody i have almost installed sql server 2005 enterprise edition on windows xp sp2 and i havent connected to any server .i have taken error:40 with my all attempts.tcp/ip protocol have been enabled on sql server configuration manager.i have tried to start sql server surface area configuration but every my attempt have been resulted a fault which is below. [No SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)] i dont suppose that i did something wrong when i setupped.because i read every article on the internet about how to make setup.also; i setupped numbers of times on my pc. but i didnt accomplished. i thank for any help.please; give your solution explicitly.
Not able to install SQL Express 2005. ------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29515&EvtType=lib%5codbc_connection.cpp%40Do_sqlScript%40OdbcConnection%3a%3aconnect%40connect%40x80090325
Needles to say, above link is useless..
I had managed to install previously, but ran into problems while trying to upsize an MS-Access database, I've tried everything from creating certificate to hacking away at the registry...Log-on with a different account, etc...Anybody knows how to get around this?
Here's part of the log file:
Microsoft SQL Server 2005 9.00.1399.06 ============================== OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time : Sat Jun 03 20:09:53 2006
Machine : YANICK Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : YANICK Product : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install : Successful Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine : YANICK Product : Microsoft SQL Server VSS Writer Product Version : 9.00.1399.06 Install : Successful Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : YANICK Product : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install : Successful Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_MSXML6_1.log -------------------------------------------------------------------------------- Machine : YANICK Product : SQL Server Database Services Error : SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online. -------------------------------------------------------------------------------- Machine : YANICK Product : Microsoft SQL Server 2005 Express Edition Product Version : 9.00.1399.06 Install : Failed Log File : e:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0005_YANICK_SQL.log Last Action : InstallFinalize Error String : SQL Server Setup could not connect to the database service for server configuration. The error was: {Microsoft}{SQL Native Client}SSL Provider: The certificate chain was issued by an authority that is not trusted. Error Number : 29515 --------------------------------------------------------------------------------
I've run into a problem after upgrading production servers running under Microsoft Cluster Server, Windows Enterprise Server 2003 SP1, and SQL Server 2005 SP1 Enterprise Edition.
Once I completed the upgrade and applied the patch, I needed to examine the values set in the Features component of the Surface Area Configuration tool. The tool attempts to connect to localhostinstancename, but reports the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error:26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I'm logged into the virtual server via Remote Desktop, but the SAC tool thinks I'm logged into the physical server supporting the virtual server. I seem to be caught between a rock and a hard place here, as I can't enable remote connections without first gaining access on the server itself.
Hi All, Using Visual studio 2005 you can create a simple database to enable the use of login using asp.net configuration by clicking on website on the menu bar. By default the database is created and stored in the App_data file. However my service provider has a separate server for SQL (SQL Server), therefor it will not work. How can I use this Asp.Net Configuration to create a database on my sql server? Hope this question makes sense!!
To get an understanding of the SQL Server technology and the hardware requiremnets. To configure a VLDB system for OLTP what is a typical hardware configuration that will be used.
No of Rows:10 Million No of Tables : 50
Will have to spilt this out into many databases, or will one database be able to handle this. Assume that the database is normalized.
Any suggestion or information will be of great help. Does MS have any information relating to this information on their web site?
I am about to rebuild the primary SQL Server 6.5 server at our site. i would like to hear from those experienced in this regarding the optimal configuration settings. I have Microsoft`s recommendations, but want to hear from some real-world experiences. I have 1GB of RAM and a 27 GB hard drive.
We are upgraded from sql 7.0 to sql 2000. We have a brand new server in which we are installing it on. We are trying to decide on the best setup for it. The db are a datawarehouse. So mainly used for input. Gets updated with new data once a day.
We were going to have: Partician 1 : Raid 1 - OS and Applications
Now we are trying to decide on the other particians: We have 6 36 Gig Drives to work with. One of them is going to be a hot swappable So basically we have 5 36 Gig drives to work with. I've read that its better to divide up the data/logs/tempdb. Would the following setup be good for performance or if not what would you recommend: We were thinking of making all of them Raid 5. My network guys say that with Raid 5 I'll end up with about 70 % so that accounts to about 127 Gig. So I was thinking the following:
I have to build NT server for a SQL database which is just over 1.1 Gb. Does anybody have any suggestions for server configuration that I should look into i.e. Splitting the data and trans log across different disks. Amount of memory .... etc.
I have windows xp sp2 on my laptop with 512 mb ram , 60 gb hdd. and amd 2 ghz processor. i have installed microsft.net 2.0 framework and every other prerequist for sql server 2005 enterprise edition. i have also installed sql server 2005 enterprise edition. but my problem is that i m not getting any servername to connect in the sql server management studio. plz can anybody tell me how i have to make connection in the sql server 2005 enterprise edition. (i must mention that i m using my laptop stand alone.)
If installing SQL Server 2000 ( Standard Edition or EE) on any of theWindows 2000 Server with multiple processor, do we have to to do anyadditions configuration to utilize SMP ?
Hello, I am from Brazil, for this my English He/she would like to know how I can configure SQL Sever Express to Turn in my Local pc. If they can help am very grateful. Wenderson Castro
I have SQL Server 2000 loaded on my standalone Laptop - using Windows XP Pro.
When adding a system DSN at the prompt "Which SQL server do you want to connect to?" I have five options even though I have I SQL server. I have an option of two (local) servers and three (MYSQLSERVER) servers.
I downloaded the SSEUtilSetup.EXE and extracted the SSEUtil.exe to a folder of C:drive of my PC that is Windows XP Pro. I plan to learn the CLR programming via user-instance of SQL Server Express. I need to have SQL Server Express Utility installed. Please help and tell me how I can install SSEUtil.exe in my PC and how I use it to interact with SQL Server Express.
I have been tasked with moving our SQL server estate onto new 64bit SQL 2008 Virtual servers on a VM base. Each Virtual server will be attached to our SAN that i will have no control over. Do i ask for multiple LUNs pretending that there is a COS), Etemp), FData) and Glog) disk structure or do I just present a very big space as a single C: drive and let it go.We are consolidating lots of old physical servers onto fewer (more powerful) virtual servers (according to the VM and SAN administrators)
I cannot see any services within "SQL Server 2005 Services" in SQL Server Configuration Manager.
I am new to SQL Server 2005 and recently installed all of the SQL Server 2005 64-bit components on to a Windows 2003 64-bit server. I can create and view databases via SQL Server Management Studio. I can also start and stop the SQL Server service for the default instance via SQL Server Management Studio. But I should be able to start/stop the service via SQL Server Configuration Manager and I believe I'm supposed to use SQL Server Configuration Manager to make changes to the services.
I'm concerned that something may have become corrupted and is effected the SQL Server Configuration Manager. Any suggestions?
