Language Error When Creating FULLTEXT INDEX By Using SQL Server 2005 Management Express!
Apr 12, 2007
Hello..
When I used Microsoft SQL Server 2005 Management Studio Express to Create FULL TEXT INDEX by this code:
CREATE FULLTEXT INDEX ON txtfilestbl(txtfile) KEY INDEX PK_txtfilestbl ON ForumsArchiveLibCtlg WITH CHANGE_TRACKING AUTO
It returns this ERR MSG:
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
I Use same this code to create FULL TEXT INDEX by using Microsoft SQL Server 2005 Management Studio, and it was working properly.
What I have to do?
I have a problem restoring a Read-Only filegroup in a database. I've restored the Read/Write filegroups first without any problem.
Then, I am able to recover Read-Only filegroups which do not contain fulltext indexes with the command : RESTORE DATABASE GSM FILEGROUP = 'FG_RO_20080214' WITH RECOVERY
However, for filegroups containing FullText indexes (Fulltext indexes are in the same filegroup as data used for this index), I always get the following error :
Server: Msg 3149, Level 16, State 6, Line 1 The file or filegroup "sysft_CAT_SM_20080127" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed. Server: Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally.
If I'm looking at sys.database_files catalog view, I can see the following name type_desc state_desc ------------------------ ----------- ----------------- sysft_CAT_MS_20080127 FULLTEXT RECOVERY_PENDING
CREATE FULLTEXT INDEX ON table_name [(column_name [TYPE COLUMN type_column_name] [LANGUAGE language_term] [,...n])] KEY INDEX index_name [ON fulltext_catalog_name] [WITH {CHANGE_TRACKING {MANUAL | AUTO | OFF [, NO POPULATION]}} ]
But where and how can I create it graphically in management Studio for 2005?
For demonstration I created a fulltext index on table employee in Northwind database.
The following query gives an error:
SELECT * FROM employees WHERE CONTAINS (FirstName, 'Barbe')
Replacing 'Barbe' by 'Barb' or other words it works fine.
The error message is (I have a french version of SQL installed, here the translation: "A clause in the query contains only ignored words" Une clause de la requête ne contient que des mots ignorés)
Language for wordbreak in fulltext index is French and the error happens only with French, with English it works.
Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251
I AM GOING TO RIP MY HAIR OUT WITH THIS PROBLEM. I have reinstalled both sql server express 2005 and VWD about 5 times with the same problem. please, please, please someone throw me a bone here and help me resolve this problem. When I create a new EMPTY website and I rightclick on my website in the solution explorer and choose add item, I chooe SQL Database, I give it a name 'database.mdf' and click add. I get the following message: you are attempting to add a database to an asp.net application. for a database to be gfenerally consumable in your site, it should be placed inside the 'app_data' folder. would you like to place the database inside the 'app_data' folder? I click YES (I know this message is normal) then I get the following message: Connection to SQL server files (*.mdf) require SQL express 2005 to function properly. please verify the installation of the component or download from http://go.microsoft.com/fwlink/?linkid=49251 I can add anything else but this damn mdf file. thanks for all your help in advance.
I get an error dialog when I try to create a new SQL database, both via the Add New Item dialog and the property wizard of a new SqlDataSource control. The error is:
Local Database File:
User does not have permission to perform this action.
I've searched for help with this.
I ensured the App_Data folder exists and I added the local ASP.NET account to the group that have R/W access to it (although the RO flag is in an unchangeable tri-state on the folder). The SQL Server Express error log is clean and indicates full functionality. Everything is running locally. No VWD installation errors.
Hi,My webhost (1and1) is running SQL Server 2000 and their web tool supports the import of .bak files. However, when I try to import my .bak files created in SQL Server Management Studio Express I get the following error:"The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database. RESTORE FILELIST is terminating abnormally."I have Googled this error and learnt that 2005 .bak files are not compatible with 2000 .bak files. I'm just wondering if there are any work arounds to this or alternative tools that I can create 2000 compatible .bak files from from 2000/2005 .mdf files.Thanks in advance.
I had problem when change database from sqlserver 2000 to sql express 2005.The fulltext index does not create automatically.Example: i use sqldatasource to insert new name to my table.and then i find it by query like this : select count(*) from mytable where contains(mycol,'newname')the result is 0but if i run query to start full index : exec sp_fulltext_catalog 'myfulltext','start_full' and run query select count(*) from mytable where contains(mycol,'newname')again. The result is 1. So i alway run exec sp_fulltext_catalog 'myfulltext','start_full' after insert or update, delete to create fulltext index. When i use sql server 2000 , i didn't need do that, it automatic. Pls help me !!! how to make fulltext index create auto in sql express 2005 .
For the first time, I want to set up the configuration of my SQL Server Management Studio Express (SSMSE) to allow me in doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. The SSMSE and VB 2005 Express are in my Windows XP Pro PC that is part of our NT 4 LAN System in our office. I read the article "How to configure SQL Server 2005 to allow remotre connections" in http://support.microsoft.com/kb/914277/ about (i) "Enable remote connections for SQL Server 2005 Express", (ii) Enable the SQL Server Browser service", (iii) Create exception in Windows Firewall, and (iv) Create an exception for the SQL Server Browser service in Windows Firewall. I entered the SQL Server Surface Area Configuration and I could not decide what options I should take for doing the non-User-Instance/ADO.NET 2.0 programming from my VB 2005 Express. I have the following questions on the page of "Minimize SQL Server 2005 Surface Area": (1) I saw "Configure Surface Area for localhost [change computer]". I clicked on [change computer] and I saw the following: Select Computer The Surface Area Configuration of this surface area of this computer or a remote computer. Specify a computer to configure: O Local computer O Remote computer Should I choose the "Local computer" or the "Remote computer" option? (2) Below the "Configure Surface Area for localhost [change computer]", I clicked on "Surface Area Configuration for Service and Connections", Select a component and then configure its services and connections: |-| SQLEXPRESS |-| Database Engine Service I picked => Remote Connection On the right-hand side, there are: O Local connections only O Local and remorte connections O Using TCP/IP O Using named pipes only O Using both TCP/IP and named pipes Should I choose O Local and remorte connections and O Using named pipes only?
Please help and tell me what options I should choose in (1) and (2).
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________ System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------ Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) ____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
I found a bug in Management Studio, which can be reproduced with following steps:
1. Create a new publication with the 'New Publication Wizard' 2. Select a database which contains at least 2 tables. 3. Select 'transactional publicatioon' 4. Select at least 2 tables as articles 5. Set article properties for all table articles 6. Change 'Statement Delivery' to 'Insert statement', 'Update statement' and 'Delete statement' and save the article properties. 7. If you now check the properties for a single article you find that the 'Statement Delivery' is set to 'Do not replicate...'. If you generate this publication and create a subscritpion you will see, that actual no replication take place.
It took me a while to find out why my replication doesn't work! :-((
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
In the last one and half years, I used the Northwind Database in SQL Server Management Studio Express (SSMSE) to learn the programming of SqlConnections, Data sources, Database Exploere, ADO.NET 2.0, etc. via VB 2005 Express.
The Northwind Database in my SSMSE got lost very often, but I was not aware of it. How can I know where the Northwind Database is used or processed by my VB 2005 Express projects that were the examples of some tutorial books or my trial projects? How can I release the Northwind Database back to my SSMSE from the VB 2005 Express projects? Please help and advise.
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC. 1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class ////////////////////////////////////////////////////////////////////////////// I got the following error messages: SecurityException was unhandled Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")." Troubleshooting tips: Store application data in isolated storage. When deploying an Office solution, check to make sure you have fulfilled all necessary requirments. Use a certificate to obtain the required permission(s). If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list. Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Every time I try to remove 'condensed type' from the custom table view (working in database diagrams) the MSE crashes on me, as soon as I push the < button to remove it from the list of columns.
Is there a forum or place to post such a bug, or someone to send full details to? When it dies, it doesn't give me an option to send the information to MS.
I have installed SQL 2005 Express Management Studio several times and It fails to completely install. I get a message that SQL Server Express 2005 x84 did not install properly. I tried to uninstall it and reinstall it but I get the same problem. My Visual Web 2005 Express Edition and Visual Basic 2005 Express gives an error when I try to add a new database. The error is: "Failed to generate instance of SQL server due to a failure copying database files. The connection will be closed. Does anyone know what I can do to resolve this? My computer system meets the hardware requirements.
I am trying to install SQL Server Management Studio Express(SSMSE) on Windows XP SP2. But installtion does not get completed. It goes unto last step in the installation and then rollback itself. At the lat screen it displayes the message that "SQL Server Management Studio Express installation could not be completed as it was intreupted". Though I did not do any thing? I tried at least 20 times but it ends up here. I followed all the steps as defined in SQL Server Express setup on Microsoft site?
I'm trying to run the disk usage reports from the SQL Server Management Studio and I'm getting an error. I right-click on a database, go to Reports, then Standard Reports and select Disk Usage by Table. I get the error below. Can anyone help?
===================================
Object reference not set to an instance of an object. (System.Xml)
------------------------------ Program Location:
at System.Xml.XmlReader.CalcBufferSize(Stream input) at System.Xml.XmlTextReaderImpl.InitStreamInput(Uri baseUri, String baseUriStr, Stream stream, Byte[] bytes, Int32 byteCount, Encoding encoding) at System.Xml.XmlTextReaderImpl..ctor(String url, Stream input, XmlNameTable nt) at System.Xml.XmlDocument.Load(Stream inStream) at Microsoft.SqlServer.Management.Reports.StandardReport.LoadRdlDocument() at Microsoft.SqlServer.Management.Reports.Report.LoadReportQueriesFromRdl() at Microsoft.SqlServer.Management.Reports.StandardReportFactory.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.ShowReport(ReportInfo reportInfo)
Hello,I've installed SQL Server Managment Studio Express 2005 in my laptop and I already have Visual Studio 2005 Express in my system. The problem I m facing is that when I open the SQL Management Studio so it is not logging in using both the Windows Authentication method nor the SQL Authentication, I've Windows XP Professional in my system and I've set No Password on Windows. Please tell me, what's the Login and Password of SQL and secondly what's the solution to this problem.Thanking You.SAAD.
I'm trying to open a SQL Express database (MDF) with SQL Server 2005 management Studio. Is that possible? I'm getting the following error: The specified file is either not a SQL Server Compact Edition file or is corrupt. It opens fine in Visual Studio 2005. Also, is it possible to run a script in Visual Studio 2005? If so, how? Thanks, Alex
Can I use SQL 2005 Management Studio Express to manage my SQL Server 2000 dbs? Currently I have SQL Enterprise Manager Version 8.0 installed and was thinking I'd like to install and use SQL 2005 Management Studio Express instead. This doable?
I have presently installed on my local computer Enterprise Manager for access to our remote sql server. May I install sql server 2005 express and sql server management studio express on my local computer without causing conflicts with Enterprise Manager?
When launching Microsfot SQL Server Management Studio Express, I get a Popup Error box (!) without any text. After pressing the OK button, everything seems to work fine. Any ideas as to what it's trying to tell me?
Yesterday I successfully installed Microsoft Visual Basic 2005 Express Edition which included SQL Server 2005 Express. Today I noticed I needed to download the Management Studio seperate download. I downloaded SQLServer2005_SSMSEE.msi and executed it and get the following error:
Error reading from file C:...SQLServer2005_SSMSEE.msi. Verify that the file exists and that you can access it..
Solved my own problem. Once I moved the msi to C: the installation worked. Apparently the path it was in was too long causing it to be unreadable. c:xxxxxxxxSQLServer2005_SSMSEE.msiSQLServer2005_SSMSEE.msi.
tried to attach a database in sse-ms, and for some reason the database name is changing to G:someFoldersomeFolderdb.mdf, even tho i dont have a drive g:,
during "attach as" screens inside sse-ms, , ie attach>add> then select the database the mdf loction is what it is suppose to be ie C:inetpubwwwrootapp_datachp11wroxunited.mdf but the database name in the same screen shot is G:someOtherFolderAndPathwroxunited.mdf and the attach as is also the G:someOtherFolderAndPathwroxunited.mdf.
I am unable to connect to my database on a VPS server using server management studio express. I am able to ping the server. can connect to a local database but i have the same issue as others
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
have set the server so that it will allow remote connections and reset the server just to make sure that it has been implemented.
when i use osql in command prompt to make a test connection it tells me this
[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [SQL Native Client]Login timeout expired [SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
on this forum it says to perform a ping and and an a ping a- to my server which does work.
Have been working on this for 3 days and can't figure it out. Even had a guy in New Zealand who is usually my messiah of SQL and he can't figure it out so I'll be impressed if someone knows the answer.
I will buy a crate of beer for the person who solves this for me as this problem is costing me money! Maybe even 2 if done by end of tomorrow 6pm GMT!
If you don't want the beers, i will be more than happy to give a virtual pat on the back. :-)
If you need any more info, i will be watching this thread like a hawk so i'll happily answer any questions that you may have if i can.