Good morning. I have an interesting scenario where one of the requirements of the application is to translate an application to different languages. Modelling the system to translate the UI went over without a hitch, however, we have now been told that the application will need to translate all the existing database tables. Has anyone ever had to do anything like this?
I was curious if anyone out there has any suggestions on how to approach this issue... ways in which it could be modeled, alternative approaches, anything at all would be appreciated. Many thanks in advance!
I'm importing data from a flat file into a SQL Server table. Yes, I have this thing mapped correctly, data converted correctly, data scrubbed correctly. I've tested this against 14 successive files dumped from the source system and everything works perfectly...until today. Now I'm getting the following gobbledygook.
I have absolutely no clue where to even begin looking. I've already inspected every single column in the input file that is converted to something other than a string. Absolutely nothing shows up as being an overflow or truncation issue. I've calculated the maximum length of every single text column being imported and none of them overflow the destination either. Where do I even start in this completely uninformative junk to even try to figure out where the issue is?
Error: 0xC02020C7 at Load Tables, MLBAMBio [1656]: The attempt to send a row to SQL Server failed with error code 0x80004005.
Error: 0xC0047022 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "MLBAMBio" (1656) failed with error code 0xC02020C7. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC02020C7. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread7" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0202009 at Load Tables, MLBAMBio [1656]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E57.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E57 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E57 Description: "String or binary data would be truncated.".
Error: 0xC0047039 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread7" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread9" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread9" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Load Tables, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Load Tables, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Load Tables, Biography [951]: The processing of file "D:FTPtransfersourcecurbio.csv" has ended.
Error: 0xC02092B5 at Load Tables, MLBAMBio [1656]: A commit failed.
Error: 0xC0047018 at Load Tables, DTS.Pipeline: component "MLBAMBio" (1656) failed the post-execute phase and returned error code 0xC02092B5.
I have defined a cube with translations on every dimension and measure group.
when I query this cube from BIDS, the captions of each column have text in the right language (whatever is chosen in BIDS at the time of query)
Now, my customers will be sending queries from SSRS. when i fire the MDX query from SSRS I want to extract the MEMBER_CAPTION dimension property (I think this will contain the translated text for each columns header)
how can I retrieve translated attributes using mdx query. I have translated my dimension's attribute in French(France) but not getting it in caption column. I used below query
SELECT * from $SYSTEM.MDSCHEMA_LEVELS
LEVEL_CAPTION column has same value as LEVEL_NAME. I ran this query after changing default language of analysis service to French(France).
How can we select translated text of cube translations, like measures, dimensions, dimension attributes. I have below query which return translations of dimension attribute's memebers
WITH MEMBER Measures.CategoryCaption AS Product.Category.CurrentMember.MEMBER_CAPTION MEMBER Measures.SpanishCategoryCaption AS Product.Category.CurrentMember.Properties("LCID3082") MEMBER Measures.FrenchCategoryCaption AS Product.Category.CurrentMember.Properties("LCID1036") SELECT { Measures.CategoryCaption, Measures.SpanishCategoryCaption, Measures.FrenchCategoryCaption } ON 0 ,[Product].[Category].MEMBERS ON 1 FROM [Adventure Works]
I am getting translations of product category members but I want to get translated text of "Category"?
Code page translations are not supported for the text data type. From:1252 To: 950.I would like to know what this message means. I also installed thelanguage packs in advanced settings, Everything is set to English. Mywindows XP computer is XP English. For some reason I cant get an updateto go thru using ADO. like Recordset.UpdateAlthough other routines using .update workAny ideas?
Hi folks; I have just realised that my language problem is because DB language; then I've changed the language to Turkish but it didn't effect tables.. When I wanted to change tables manually it worned data loss may occur.. What would you suggest to do it? Thanks
Hi; I need Turkish characters in my DB therefore I have to change Collation from SQL_Latin1_General_CP1_CI_AS to Turkish But what I realised is that aspnet membership tables' collation is SQL_Latin1_General_CP1_CI_AS as well and they can store Turkish chars but why not my tables? Thanks..
I want to insert data into my database in greek language but i am getting some "???????" symbols. I have a table called "Words" with columns "Word"-as char and "Result"-as int. Can somebody please explain me what to do?
I am looking into a production geared software called MassGroup. (www.massgroup.com) It says that its FactoryServer builds are on a standardized SQL framework and web architecture for data collection, work order requests, reporting and asset management. My questions are:
1. Is SQL its own programming language? If not what is it? Answer: After going thru several pages and reading the fine print I discovered they use VB, ASP, COM technology, and Crystal Reports.
2. How powerful do you think this would be at gathering data and does it have the capability of creating a number sequence automatically? (example: 0001; 0002; 0003...)
Any help would be appreciated. Thank you in advance!!!!!
Does anyone here know anything about the DCS Scripting Language.
A contract vacancy has arisen using this language but I've never heard of it and there does seem to be anything on the internet about it. Can anyone help?
Just curiosity ... never pick up this since beginning. Our box is setted the language to English (United States) while the local machine setted as English (Australia) which I thought it's corresponding to locale machine not sql box.
Will this language setting effecting date issue stuff (DD-MM-YYYY)? Can someone clarify on this?
This thing brought up my attention cause we've just ran a trace and there is a warning which is:
User Error Message - Changed language setting to us_english.
i need to store russian data in sql server db but i found the russain data appeared as odd character in the table, can sql server support it or is there other solution for it? thanks!
i need to know in which language the standard SQL is implemented.. and that from where can i get the code.. i need the code for the "logical operators" of SQL.
I need help about storing data in chinese, arabic, english..... languages in one database. For that I create Database with Latin1_General_CI_AS and I have table Testing with two columns wich are LangName= nvarchar(50), and Comment = nvarchar(MAX). I tried to store comment in chinese language but I could not, when I entered the data "個編碼å?¯ä»¥åŒ…å?«è¶³å¤ çš„å—元：例如，單單æ?å·žå…±å?Œé«”就需è¦?好幾種ä¸?å?Œçš„編碼來包括所有的語言。å?³ä½¿æ˜¯å–®ä¸€ç¨®èªžè¨€ï¼Œä¾‹å¦‚英語，也沒有" it converted as ? sometimes or look as a square.
I've just moved servers - WK3 to WK3 - installed SQLserver 2005 and uploaded the database. Code base has not changed but now I'm getting "String was not recognized as a valid DateTime.Couldn't store <21/07/2006>" . I suspect its to do with the default language , but although the default is English (United States) as in my last server, I have set the language in Advanced settings to be British English. I can't see any difference between the settings and my last server. I'm British BTW . I also ran EXEC @ret = sp_defaultlanguage 'sa', 'British English' as the only login is sa . WK3 is itself set to English (United Kingdom) - I thought SQL 2005 would inherit this setting? Any help would be much appreciated.
I have to Make Department Table. But this there names can be in multi language. --------------------------------------------DepartmentGroup--------------------------------------------DepartmentGroupId (P.K.)UniqueNameCreatedDateModifiedDate-------------------------------------------- --------------------------------------------Department--------------------------------------------DepartmentId (P.K.)NativeNameNavigateUrlIsFavoriteLanguageId (F.K.)DepartmentGroupId (F.K.)IsVisibleCreatedDateModifiedDate--------------------------------------------
From this design we can move to same department in different language.
Hi,I have a table in an MS SQL 2000 database that represents fields on a form.CREATE TABLE [dbo].[TagData]( [FieldName] [nvarchar](255), [UserID] [int] NOT NULL, [Data] [nvarchar](255)) A requirement has come up where some of these fields must contain Hebrew, or any other unicode character, data and some of the fields will be English. How can I go about saving and retrieving this information.The current solution is a legacy Classic ASP application and I suspect I am going to have to redo this in ASP.NetThanks,Leon
HI, I am using Multi languages web application with sql database...I am using Arabaic and English languge is there is any thing to change sql database data in Arabic and English on run time.I am using only one database client add some record in Arabic in sql database but the another side some one wana check those records in English...plz let me know how can i do on run time asp.net
Can someone please help , we are trying to change the default language from us_english to british englsish as the date formats have to be in dd/mm/yyy for our european clients.
We tried sp_configure 'default language' 23 Reconfigure . It worked 3 months back.
We are trying this on the reverse , now and it doesnt work.
We are trying to change our SQL Database with default Us-English with mdy to British with dmy format for dates . We had earlier tried it seemed to work. Now It is not working. Could some one please help.
we tried
sp_configure 'default language', 23 reconfigure
Should we shut down the server to see the changes, can someone please help.
During work with creating, updating or deleting objects in a database, we use explicit name of the objects, for example DROP PROCEDURE myProc. By what the method can I avoid using the explicit name and get something like this: DROP PROCEDURE @myProc or DROP PROCEDURE id_myProc?
Is there any feature in SQL Server 2000 through which I can translate my Database into different languages at runtime.
Thanks & Regards Anoop Singhal Oracle Certified Professional Team Leader (Database) KeyWest Business Systems (P) Ltd. Ph. 0135-2710533,2710511 Cell: +91-9412051028
I was wondering how to change the language settings on SQL Server. The server is currently set to US English, and I was wondering how it is possible to change it to UK English. The Server Regional Settings are set to UK English.
Also, on a semi-related topic, does SQL Server store dates in a universal format, and then when data is requested does it 'translate' these dates into the format required by that particular regional setting?
I am trying to execute a query which has the Greek letter as below. But it is not returning any rows even though I have a row exists in database matching the condition below.
select ID from pmf where portfolio = 'ãç1'
I am using the ODBC connection to execute the query.
