Hello everyone,
I have store procedure that was created on 9/15/2005. It went through some modificiations since then. How can I find out when was the last updated or last two update on this object?
Thanks
Hi,
I want to retrieve the values from store_geofence table where the timeduration exceeds certain interval
the procedure is as below
CREATE
procedure [dbo].[GeofenceByCustomer]
@regno nvarchar(50),
@frmdate nvarchar(50),
@todate nvarchar(50),
@Geofence nvarchar(50),
@interval int,
@userid nvarchar(50)
as
begin
declare @val int
Declare @strSql as nvarchar(3000)
Select @val=count(*) from basestation where superuserid=@userid and
base_station_name=@Geofence
--if(@val=0)
begin
create table #templ(registrationno nvarchar(50),basestation
nvarchar(50),entry_time datetime,exit_time datetime,duration
int)
select @strSql='
insert into #templ(registrationno,basestation,entry_time,exit_time,duration)
select
registrationno,basestation,entry_time,exit_time,datediff(mi,entry_time,exit_time)
as duration from store_geofence where entry_time>'+@frmdate+' and
exit_time<'+@todate+' and datediff(mi,entry_time,exit_time)>'+@interval+'
and basestation in ('+@Geofence+') order by entry_time,registrationno'
execute (@strSql)
print @strSql
select * from #templ
drop table #templ
end
end
GO
I should specify the duration in int to take affect
datediff(mi,entry_time,exit_time)>'+@interval+'
but i do not know how to rewrite this path
i cannot put as
datediff(mi,entry_time,exit_time)>'+@interval+'
it returns an error
Syntax error converting the nvarchar value '
insert into #templ(registrationno,basestation,entry_time,exit_time,duration)
select
registrationno,basestation,entry_time,exit_time,datediff(mi,entry_time,exit_time)
as duration from store_geofence where entry_time>01/01/2008 and
exit_time<01/01/2008 and datediff(mi,entry_time,exit_time)>' to a column of data type int.
How should i rewrite it
please help
regards
cmrhema
I am using SQL Server 2008 R2 SP1, and BIDS 2008 SP1. The problem I am about to define does NOT happen when the report is deployed to the report server, but only within the report development environment (BIDS).
From within BIDS my reports are fed by stored procedures. The problem is when I modify a stored procedure in Management Studio, and refresh the report from within BIDS, the report does not reflect the new changes made in the stored procedure. So far I have found one clumsy solution to this problem:
1) Go to the folder where the project is saved on the file system.
2)Find the ".data" file that is associated to the particular report, then delete it. For instance, if my report name is TestReport.rdl, find the file named TestReport.rdl.data, then delete it.
I know I can call store procedure from store procedure but i want to take the value that the store procedure returned and to use it:
I want to create a table and to insert the result of the store procedure to it.
This is the code: Pay attention to the underlined sentence!
ALTER PROCEDURE [dbo].[test]
AS
BEGIN
SET NOCOUNT ON;
DROP TABLE tbl1
CREATE TABLE tbl1 (first_name int ,last_name nvarchar(10) )
INSERT INTO tbl1 (first_name,last_name)
VALUES (exec total_cash '8/12/2006 12:00:00 AM' '8/12/2006 12:00:00 AM' 'gilad' ,'cohen')
END
PLEASE HELP!!!! and God will repay you in kind!
Thanks!
My store Procedure is not save in Strore Procedure folder at the time of saving it give me option to save in Project folder and file name default is SQLQuery6.sql when i save it after saving when i run my store procedure
exec [dbo].[SP_GetOrdersForCustomer] 'ALFKI'
I am getting below error :
Msg 2812, Level 16, State 62, Line 1
Could not find stored procedure 'dbo.SP_GetOrdersForCustomer'.
Hi guysi would really appreciate your help here. what am i doing wrong with this stored procedure ALTER PROCEDURE usp_CreateNewCustomer( @LName as varchar(50), @FName as varchar(50), @Dept as varchar(50)=NULL, @PhoneType as varchar(50)=NULL, @Complete as Bit=NULL, @CustomerID as Int OUTPUT, @FaxModel as varchar(50)=NULL, @FaxNumber as varchar(50)=NULL, )ASINSERT INTO [CustomerInfo] ([LName], [FName], [Dept], [PhoneType], [Complete]) VALUES (@LName, @FName, @Dept, @PhoneType, @Complete)SELECT SCOPE_IDENTITY()INSERT INTO Extras (CustomerID, FaxModel, FaxNumber) VALUES (@CustomerID, @FaxModel, @FaxNumber)RETURN It keeps on complaning "'usp_CreateNewCustomer' expects parameter '@CustomerID', which was not supplied."thanks
View 4 Replies View RelatedHi all,
I have a few question regarding SPROC. Firstly, I want to create a sp, that will return a multiple column of data, how do you achieve that. Secondly, I want to create a store procedure that will return a multiple columns in a cursor as an output variable. Any help will be much appreciated. Can you have more then 1 return parameters???
Thanks.
Kabir
I have asp.net web application which interface with SQL server,
I want to run store procedure query of SQL using my asp.net application.
How to declare connectons strings, dataset, adapter etc to run my store procedure resides in sql server.
for Instance Dim connections as string,
Dim da as dataset, Dim adpt as dataadapter. etc
if possible , then show me completely code so I can run store procedure using my button click event in my asp.net application
thank you
maxmax
I am not sure if it is right place to ask the question. I have a store procedure in which funcitons are called and several temp tables are created. When I use sql analyzer, it runs fast. But when I called it from asp.net app, it runs slow and it waits and waits to get data and insert into temp tables and return. Though I have used with (nolock), it still not imprvoed. Any suggestions? Thanks in advance.
NetAdventure
Hello, I am very new to ASP.NET and SQL Server. I am a college student and just working on some project to self teaching myself them both. I am having a issue. I was wondering if anyone could help me.
Ok, I am creating a web app that will help a company to help with inventory. The employee's have cretin equipment assign to them (more then one equipment can be assigned). I have a search by equipment and employee, to search by equipment the entire database even then equipment that isn't assigned with the employee's it shows only that employees and if they have any equipment. They can select a recorded to edit or see the details of the record. The problem i am having is that the Info page will not load right. I am redirected the Serial Number and EmployeeID to the info page. I got everything working except one thing. If a person has more then one equipment when i click on the select it redirect and only shows the first record not the one I selected. and when i change it, a employee that doesn't have equipment will not show up totally.
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNo
EmployeeID and SerialNo are primary keys.
I was thinking maybe create a store procedures, but I have no idea how to do it. I created this and no syntax error came up but it doesn't work
CREATE PROCEDURE dbo.inventoryinfo AS
DECLARE @EmployeeID int DECLARE @SerialNo varchar(50)
IF( @SerialNo is NULL)
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID
ELSE
SELECT E.FirstName AS UserFirstName, E.LastName AS UserLastName, eqtype.Description AS UserEquipType, empeq.UserEquipID, E.EmployeeID, E.cwopa_id, eq.IPAddress, eq.Location, eq.DataLine3, eq.DataLine2, eq.Voice, eq.DataLine1, eq.FloorBox, eq.Comments, eq.SerialNo, eq.Model, eq.Brand, eq.TagNo, eq.PurchaseLease, eq.WarrantyExpDate, eq.PhoneType, eq.PhoneNum, eq.CellNumber, eq.DataNumber, eq.SIDNumber, eq.Carrier
FROM dbo.EMPLOYEES AS E LEFT OUTER JOIN dbo.EMPLOYEES_EQUIP AS empeq ON empeq.EmployeeID = E.EmployeeID LEFT OUTER JOIN dbo.EQUIPMENT AS eq ON eq.EquipID = empeq.EquipID LEFT OUTER JOIN dbo.EQUIP_TYPE AS eqtype ON eqtype.EquipTypeID = eq.EquipTypeID WHERE E.EmployeeID = @EmployeeID and eq.SerialNo=@SerialNoGO
Also, when a user selects the select button in either Employee search or Equipment search it redirects them to info.aspx. Should I create a different aspx page for both? But I don't believe I should do that. I don't know if I gave you enough information or not. But if you could give examples that would be wonderful! Thanks so much Nickie
I want to know when does SQL flushes Store Procedure from the cache.
Thank You,
Piyush Patel
Hi, All,
I need to write a sales report which needs to seperate total from direct sale and agentsale. The report looks like this( in the table of query,we have agentnumber, productname, sales, month
Month salefromagent directsale total
Jan 1100 2300 3400
Feb 800 500 1300
..........
Dec
---------------------------------
I know we can handle this in the program use two queries.
But is there a way to do it use store procedure and then pass the result of store procedure to the ASP program. I am trying to write my first store procedure, thanks for any clue.
Betty
Hi all,
I need to write a sales store procedure.
The sales summary is basically group by agentCode.
But the problem is some agents have subagents.
i.e., in the sales table.
one agent 123456 has many subagents whose agentCode start with 17. And I want to group sales for all subagents who have agentCode 17XXXX to agent 123456's sales.
what should I do in the store procedure.
Thanks
Betty.
I am trying to create a store procedure that look at a table and only maintain 30 worth of data only forever. The data that fall outside the 30 days need to be deleted. Can anyone help me with this?
Thanks
Lystra
I would like to create a employee store procedure to insert a record and mean while i can retrieve the EmployeeID for the record just inserted. Can you show me how to create a store procedure like this. Now i have a insert store procedure in the following:
CREATE PROCEDURE AddEmployee
(@efname nvarchar(20),
@elname nvarchar(20)
)
AS
insert into tblEmployeeName
(EmployeeFName, EmployeeLName)
values (@efname,@elname)
GO
Thanks.
I created a batch file to run a DTS saved as a STRUCTURED STORE FILE. Works fine on the command promt.
Can I use a SPROC to call something like a shell command to execute that batch file? If yes, how is this be possible?
Thanks
This is an Oracle store procedure. Can Any body help me to convert it into SQL Server stored Procedure
PROCEDURE CALC_PERC (DB_ID IN NUMBER, LAT_TYPE IN CHAR) IS
Tot_work_all number(12,2);
Bid_tot number(12,2);
Ewo number(12,2);
Overruns number(12,2);
Underruns number(12,2);
Contr_tot_all number(12,2);
sContractType ae_contract.contr_type%type;
BEGIN
select sum(nvl(tamt_ret_item,0) + nvl(tamt_paid_item,0))
into Tot_work_all
from valid_item
Where db_contract = db_id;
Select sum(Contq * Contr_Price) into Bid_tot
From Valid_item
Where nvl(New_Item,'N') <> 'Y'
and db_contract = db_id;
Select sum(Qtd * Contr_price) into Ewo
From Valid_item
Where nvl(New_item,'N') = 'Y'
and db_contract = db_id;
Select Sum((Qtd-Nvl(Projq,0))*Contr_Price) into Overruns
From Valid_item
Where Qtd > Nvl(Projq,0)
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
IF LAT_type <> 'R' THEN
Select Sum((Nvl(Projq,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Projq,0) < Contq
and db_contract = db_id
and nvl(New_Item,'N') = 'N';
ELSE
Select Sum((Nvl(Qtd,0)-Contq) * Contr_Price) into Underruns
From Valid_item
Where Nvl(Qtd,0) < Contq
and db_contract = db_id
and nvl(New_Item,0) = 'N';
end if;
Contr_tot_all:= NVL(Bid_tot,0) +NVL(ewo,0) +NVL(overruns,0)
+NVL(underruns,0);
IF Contr_tot_all = 0 THEN
Select Contr_type into sContractType from ae_contract where db_contract = db_id;
IF sContractType = 'A' OR sContractType = 'T' THEN
--If the divisor is zero here, it's not an error.
update ae_contract set perc_compu = 0 where db_contract = db_id;
ELSE
--If the divisor is zero here, it would be an error
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
Else
--Here we have a real number to calculate, so go ahead and do your stuff!
update ae_contract set perc_compu = 100 * tot_work_all/contr_tot_all where db_contract = db_id;
END IF;
END;
1. can a stored procedure call itself? if else how ?>
2. how to run a job for a stored procedure to exucte every day.
hello
iam new to store procedures.can anyone tell me how do i put in this sql statement into store procedure
SELECT * FROM PortMaster WHERE PortCode= '" & Request.QueryString("PortCode") & "' "
TheProblem is coming in ,how do i put "Request.QueryString("PortCode")" into sql queranalyzer.iam using this in .aspx page.
depending on querystring the record is selected.
hello
iam using store procedure to open the the selected rows in datagrid into Excel.but iam getting blank spreadsheet.the querystrings are getting passed but the rows turn out to be blank.
if i do not use store procedure than everything is ok.the querystring contains multiple strings so as to display it in excel.
the stroe procedure is
CREATE PROCEDURE Employee_ExcelDisplayHO(@ID varchar(100))
AS
SELECT * FROM employee_master WHERE empuser_id IN (@ID)
and this is the statement that i use in my .aspxpage to call store procedure
Dim Cmd As New SqlDataAdapter("Employee_ExcelDisplayHO", myconn)
cmd.SelectCommand.CommandType = CommandType.StoredProcedure
cmd.SelectCommand.Parameters.Add(New SqlParameter("ID", SqlDbType.VarChar, 100))
cmd.SelectCommand.Parameters("@ID").Value = Request.QueryString("ID")
any suggestions wht may be wrong
iam using store procedure to return certain no. of columns frm table.the query is
SELECT empuser_id,FullName,CAddress,PAddress,PhResidence,Mobile FROM employee_master WHERE empuser_id IN (" & txtID.Text & ")
i return it to datagrid in my .aspx(using VB.net) page.but i am getting blank datagrid. when i write the above query in my codebehind it runs normally and datagrid is populated with records.
i tried this in query analyzer as well it runs normally returing rows.
only in store procedure it gives me blank record.
any suggestions what is wrong ?
hello sir
i want to write store procedure.
I write following code--
drop Proc Analyst
CREATE PROC Analyst
@UserID varchar(20),
@StockName varchar(50)
AS
INSERTtAnalystAssignHistory
(
AnalystAssignHistoryCode,
SecurityCode,
ISIN,
StockName,
UserID,
IsDummyEnabled,
AnalystAssignDate,
StatusCode,
CreatedBy,
CreateDate,
UpdatedBy,
UpdateDate
)
SELECTCOALESCE((SELECT MAX(AnalystAssignHistoryCode) FROM tAnalystAssignHistory), 0) + 1,
SecurityCode,
ISIN,
StockName,
'ShahVis',
IsDummyEnabled,
AnalystAssignDate,
'A',
'Gayatri',
GETDATE(),
NULL,
NULL
FROMtAnalystAssignHistory
WHEREUserId = @UserID
and StockName = @StockName
GO
EXEC Analyst'PatelAmi','Gujarat Ambuja Cements Ltd.'
In this procedure i want to runtime insert ShahVis i.e REassignuserid. it will always change so i want runtime insert this field.
and created by this is store in globaly i want to retrive this runtime.
Please help me.
I am trying to loop through a string of ID's and check if theproductname for the ID is 'Chai' if so change it to 'Tea'. This is inthe northwind db - products table. call it exec sp_UpdateProduct'1,2,3'It does not work, any ideas - syntax, etc....CREATE PROCEDURE dbo.sp_UpdateProduct@IDs varchar(200)ASBEGINdeclare @sStr1 varchar(200)declare @iStrLen1 intdeclare @sParseElm1 char(2)declare @sStatus varchar(200)declare @count intset @sStr1= @IDsset @iStrLen1= len(@sStr1)SET @count = 0while charindex(',',@sStr1) <> 0beginselect @sParseElm1 = substring(@sStr1,1,CHARINDEX(',',@sStr1 ) - 1)set @sStatus = 'select productname from products where productid='+@sParseElm1if @sStatus = 'CHAI'update products set productname = 'TEA'elseupdate products set productname = 'CHAI'set @sStr1 = substring(@sStr1, CHARINDEX(@sStr1,',') + 1, @iStrLen1)endendGO
View 1 Replies View Related
Hi,
I follow the example for store procedure from this link to deal with large amount of data and it work great.
http://www.4guysfromrolla.com/webtech/042606-1.shtml
CREATE PROCEDURE [dbo].[usp_PageResults_NAI]
(
@startRowIndex int,
@maximumRows int
)
AS
DECLARE @first_id int, @startRow int
-- A check can be added to make sure @startRowIndex isn't > count(1)
-- from employees before doing any actual work unless it is guaranteed
-- the caller won't do that
-- Get the first employeeID for our page of records
SET ROWCOUNT @startRowIndex
SELECT @first_id = employeeID FROM employees ORDER BY employeeid
-- Now, set the row count to MaximumRows and get
-- all records >= @first_id
SET ROWCOUNT @maximumRows
SELECT e.*, d.name as DepartmentName
FROM employees e
INNER JOIN Departments D ON
e.DepartmentID = d.DepartmentID
WHERE employeeid >= @first_id
ORDER BY e.EmployeeID
SET ROWCOUNT 0
GO
my problem is how do i do the Sort for this.
Any help would be appreciated.
Thanks
Ddee
Dear Frnds,
can anyone tell me is it possibel to use store procedure within the stored procedure ?? is it possible ??? if yes ?? then give me simple example
awaiting for positive reply
Thanks
Hiren
Hello, I have a problem, I want to execute in a single transaction three insert in store procedure, as it could implement. Thanks for its attention
View 1 Replies View RelatedHello AllI get stuck in one problem , Please help me and excuse me on the poorKnowledgein SQL Server Store procedureQ1...I want to return a string type value from store procedure , Is itpossible to do it.if posible then Please guide us how we can do it .Q2...I search a lot on net but i am unable to understand the ExtendedStore Procedure.How to register it and how to use in our store procedure .Q3 ... How to use xp_sendmail.dll in SQL Server.Thanking youWith regardsTarun
View 1 Replies View RelatedHi Everyone,I appreciate if you can help on the following procedure. When I ran it in my project in Visual Studio, the compiler always complained that it expected a parameter "@stud_id" that was not provided. What was wrong with this procedure? Thank you for your help.a123. ALTER Procedure registerstudent( @email nvarchar(100), @student_password nvarchar(10), @first_name nvarchar(25), @last_name nvarchar(25), @address nvarchar(255), @city nvarchar(50), @province nvarchar(25), @country nvarchar(50), @phone_no_cell nvarchar(25), @phone_no_home nvarchar(25), @hour_rate int, @status char(1), @stud_id int output )As INSERT INTO student ( email, student_password, first_name, last_name, address, city, province, country, phone_no_cell, phone_no_home, hour_rate, status ) VALUES ( @email, @student_password, @first_name, @last_name, @address, @city, @province, @country, @phone_no_cell, @phone_no_home, @hour_rate, @status )SELECT @stud_id = @@identity
View 2 Replies View RelatedHi,I have three different tables. I want one login screen and check all table ,if any user got it,but i have written simple store procedure and i take values by parametrically,how can i know user's table name?ALTER PROCEDURE [dbo].[sp_GirisKontrol] -- Add the parameters for the stored procedure here @Username nchar(12), @Password nchar(12), @Id int output, @Rowguid UniqueIdentifier outputASBEGIN SET NOCOUNT ON; SELECT @Id=Id,@Rowguid=Rowguid FROM Admin WHERE Username =@Username AND Password =@Password UNION SELECT @Id=Id,@Rowguid=Rowguid FROM Ogretmen WHERE Username =@Username AND Password =@Password
UNIONSELECT @Id=Id,@Rowguid=Rowguid FROM Ogrenci WHERE Username =@Username AND Password =@Password if(@Id IS NULL) SELECT @Id=-1END
Hi:
If I have a query: SELECT productName FROM tblProduct WHERE productID = 1
If I send this query from my application, it will pretty fast getting the result return back from SQL Server.
I use store procedure in SQL server, should also very fast.
But which one is better in terms of speed and traffic? especially when my query getting complicated and more data need to retrive. I need to decide which way (store procedure or SQL ) for my medium applicatoin.
Thank you very much.
Jt
I have a stored procedure that creates a normalized table from an existing denorm table. So I just need a simple way to call this SP from an aspx page. It would be good though to know how many records were effected, but this is not a requirement.
View 5 Replies View RelatedIs there anyway to run an ALTER FULLTEXT CATALOG mycat REBUILD, before the select? ALTER PROCEDURE [dbo].[Search] @q VARCHAR(255)ASBEGIN SELECT Q.Rank, Title, ArticleID, REPLACE(REPLACE(REPLACE(REPLACE(SUBSTRING(Article,0,250), 'Overview', ''), '<strong>', ''), '<br />', ' '), @q, '<span class="Highlight">' + @q + '</span>') AS Article, @q AS Query FROM Articles, FREETEXTTABLE(Articles, *, @q) Q WHERE Articles.ArticleID=Q.[key] ORDER BY Rank DESC;ENDIf I don't rebuild the catalog, the rank always returns as 0. Thanks.
View 7 Replies View RelatedHi I have created one store procedure which containts multiple if statement . I have create this for searching . Here is store procedure---------------------------------------------------------SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE School_Alumni_Search -- Add the parameters for the stored procedure here @Name nvarchar(30), @Batch_Year nvarchar(30), @Course_Done nvarchar(30) ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT OFF; -- Insert statements for procedure here IF @Name='' SELECT dbo.User_Login.First_Name, dbo.User_Login.Last_Name, dbo.User_Login.City, dbo.User_Login.Phone_Number, dbo.User_Login.Email, dbo.School_Alumi_Registration.Year_of_Joining, dbo.School_Alumi_Registration.Year_of_Leaving, dbo.School_Alumi_Registration.Batch_Year, dbo.School_Alumi_Registration.Course_Done, dbo.School_Alumi_Registration.Photo_Image FROM dbo.User_Login INNER JOIN dbo.School_Alumi_Registration ON dbo.User_Login.Login_ID = dbo.School_Alumi_Registration.Login_Id WHERE dbo.School_Alumi_Registration.Batch_Year=@Batch_Year and dbo.School_Alumi_Registration.Course_Done=@Course_Done print '1' return IF @Batch_Year='' SELECT dbo.User_Login.First_Name, dbo.User_Login.Last_Name, dbo.User_Login.City, dbo.User_Login.Phone_Number, dbo.User_Login.Email, dbo.School_Alumi_Registration.Year_of_Joining, dbo.School_Alumi_Registration.Year_of_Leaving, dbo.School_Alumi_Registration.Batch_Year, dbo.School_Alumi_Registration.Course_Done, dbo.School_Alumi_Registration.Photo_Image FROM dbo.User_Login FULL OUTER JOIN dbo.School_Alumi_Registration ON dbo.User_Login.Login_ID = dbo.School_Alumi_Registration.Login_Id WHERE dbo.User_Login.First_Name Like'%'+@Name+'%' and dbo.School_Alumi_Registration.Course_Done=@Course_Done print '2' return IF @Course_Done='' SELECT dbo.User_Login.First_Name, dbo.User_Login.Last_Name, dbo.User_Login.City, dbo.User_Login.Phone_Number, dbo.User_Login.Email, dbo.School_Alumi_Registration.Year_of_Joining, dbo.School_Alumi_Registration.Year_of_Leaving, dbo.School_Alumi_Registration.Batch_Year, dbo.School_Alumi_Registration.Course_Done, dbo.School_Alumi_Registration.Photo_Image FROM dbo.User_Login FULL OUTER JOIN dbo.School_Alumi_Registration ON dbo.User_Login.Login_ID = dbo.School_Alumi_Registration.Login_Id WHERE dbo.User_Login.First_Name Like'%'+@Name+'%' and dbo.School_Alumi_Registration.Batch_Year=@Batch_Year print '3' return IF @Batch_Year='' and @Name='' SELECT dbo.User_Login.First_Name, dbo.User_Login.Last_Name, dbo.User_Login.City, dbo.User_Login.Phone_Number, dbo.User_Login.Email, dbo.School_Alumi_Registration.Year_of_Joining, dbo.School_Alumi_Registration.Year_of_Leaving, dbo.School_Alumi_Registration.Batch_Year, dbo.School_Alumi_Registration.Course_Done, dbo.School_Alumi_Registration.Photo_Image FROM dbo.User_Login FULL OUTER JOIN dbo.School_Alumi_Registration ON dbo.User_Login.Login_ID = dbo.School_Alumi_Registration.Login_Id WHERE dbo.School_Alumi_Registration.Course_Done=@Course_Done print '4' return IF @Course_Done='' and @Name='' SELECT dbo.User_Login.First_Name, dbo.User_Login.Last_Name, dbo.User_Login.City, dbo.User_Login.Phone_Number, dbo.User_Login.Email, dbo.School_Alumi_Registration.Year_of_Joining, dbo.School_Alumi_Registration.Year_of_Leaving, dbo.School_Alumi_Registration.Batch_Year, dbo.School_Alumi_Registration.Course_Done, dbo.School_Alumi_Registration.Photo_Image FROM dbo.User_Login FULL OUTER JOIN dbo.School_Alumi_Registration ON dbo.User_Login.Login_ID = dbo.School_Alumi_Registration.Login_Id WHERE dbo.School_Alumi_Registration.Batch_Year=@Batch_Year print '5' return IF @Course_Done='' AND @Batch_Year='' SELECT User_Login.First_Name, User_Login.Last_Name, User_Login.City, User_Login.Phone_Number, User_Login.Email, School_Alumi_Registration.Year_of_Joining, School_Alumi_Registration.Year_of_Leaving, School_Alumi_Registration.Batch_Year, School_Alumi_Registration.Course_Done, School_Alumi_Registration.Photo_Image FROM User_Login FULL OUTER JOIN School_Alumi_Registration ON User_Login.Login_ID = School_Alumi_Registration.Login_Id WHERE (User_Login.First_Name LIKE '%'+ @Name + '%') print '6' ENDGO ----------------------------------------------------------------------------------------------- But its not working fine. Problem with if statements. I dont know where I did wrong. Please suggest me better option .
View 3 Replies View Related