Like Statement Not Working.
May 8, 2008
I have a stored procedure that has an @Style parameter passed into it.
And down at the very bottom of the procedure it has this line:
And Style Like @Style
Now I realize that is not really valid, and I changed it to Style=@Style. But I'd like to understand WHY that isn't working as it was previously.
On our development box (single core X64) it works fine but on our multiple core X64 production box, this doesn't work.
Any ideas?
This is a MS SQL 2005 server we are talking to.
View 15 Replies
ADVERTISEMENT
Jan 28, 2004
Any ideas why this line is bringing up just titles rather than titles and slogan:
dbsreq = "SELECT data_contents, data_style FROM content WHERE data_language = '" & siaith & "' AND data_type = 'title' AND 'slogan';"
(obviously it's all on one line in my code)
I don't understand why it brings up just 'title', not 'title' and 'slogan'?
Any ideas/fizes/suggestion would be greatfully appreciated.
Thanks,
Deian
View 7 Replies
View Related
Mar 21, 2000
Hi,
I am trying to write an update query to update rows in one table.
Structure of Table1:
SocialSecurityNumber Varchar(9) -- Primary Key
Name Varchar(30)
Structure of Table2 :
SocialSecurityNumber Varchar(9)
Name Varchar(30)
Table 1 contains:
Row1: "123456789" Sally
Row2: "999999999" Bill
Row3: "333333333" Alex
Table 2 contains:
Row1: "123456789" <NULL>
Row2: "123456789" <NULL>
Basically I want to update the name column in Table 2 (based on the SocialSecurityNumber column) so that after
the update Table 2 will contain:
Row1: "123456789" Sally
Row2: "123456789" Sally
------------------------------------------------------------
First I tried:
UPDATE Table2
INNER JOIN Table1 ON Table2.SocialSecurityNumber = Table1.SocialSecurityNumber
SET Table2.Name = Table1.Name
WHERE Table2.SocialSecurityNumber = Table1.SocialSecurityNumber
This works in Access but not it SQL Server 7.0.
------------------------------------------------------------
Then I tried:
UPDATE Table2
INNER JOIN Table1 ON Table2.SocialSecurityNumber = Table1.SocialSecurityNumber
SET Table2.Name = Table1.Name
Again this works in Access but not it SQL Server 7.0.
------------------------------------------------------------
Finally I tried:
UPDATE Table2, Table1
SET Table2.Name = Table1.Name
WHERE Table2.SocialSecurityNumber = Table1.SocialSecurityNumber
This also did not work.
------------------------------------------------------------
Is there any way to write this update statement without cursors?
Thanks.
View 1 Replies
View Related
Jun 16, 2006
I have this statement buried in a sproc:
INSERT INTO PLAN_DEMAND ([YEAR], BOD_INDEX, SCEN_ID)
SELECT PLAN_SHIP.[YEAR], PLAN_SHIP.BOD_INDEX, 1
FROM PLAN_SHIP LEFT JOIN PLAN_DEMAND ON
PLAN_SHIP.[YEAR]=PLAN_DEMAND.[YEAR]
AND PLAN_SHIP.[BOD_INDEX]=PLAN_DEMAND.BOD_INDEX
WHERE PLAN_DEMAND.BOD_INDEX IS NULL
When I run the sproc in QA, the statements returns records to the grid, but does not insert them into the table. If I just copy the statement into QA and execute it, it works fine.
I'm sure it's something obvious (but not to me).
Any help would be much appreciated.
View 7 Replies
View Related
Jun 2, 2008
Hi,
Mine Below Query is not Printing Anything though there is a matching record in table "gpcb_proj_paras"
Can any one help me??
declare @catg as char(1)
set @catg = '''A'''
declare @qry as nvarchar(3000)
declare @paras as varchar(200)
Set @paras = (Select convert(nvarchar(200), app_paras) from gpcb_proj_paras t
where t.act = @catg)
print @paras
-- Regards
Prashant Hirani
View 2 Replies
View Related
Oct 2, 2007
I have the following update statement, which when executed, updates zero rows. However, if I replace the first two lines with a SELECT * , I will get records. Can somebody tell me why?
UPDATE [DW_DatamartDB]. [dbo].[FactLaborDollars]
SET [LaborBudget_USD] = Week1
FROM [DW_StagingDB].[ETL].[Transform_FactLaborBudget] BUDGET JOIN
[DW_StagingDB].[ETL].[Transform_FactLaborDollars] LABOR ON
Labor.Location_Code = Budget.Location_Code
JOIN [DW_DatamartDB]. [dbo].[DimDate] DATE ON
Date.FiscalWeekOfPeriod = Labor.FiscalWeekOfPeriod AND
Date.FiscalPeriodOfYear = Labor.FiscalPeriodOfYear
WHERE Labor.FiscalYear = CAST(SUBSTRING(DATE.Date_Code,1,4) AS NVARCHAR(50)) AND
Budget.FiscalYear = CAST(SUBSTRING(DATE.Date_Code,4,1) AS NVARCHAR(50)) AND
Date.FiscalWeekofYear = 1
View 6 Replies
View Related
Nov 19, 2007
I followed an example using the AdventureWorks database to set up a simple messaging test on one database:
Code Block
-- We will use adventure works as the sample database
USE AdventureWorks
GO
-- First, we need to create a message type. Note that our message type is
-- very simple and allowed any type of content
CREATE MESSAGE TYPE JobRequest
VALIDATION = NONE
GO
-- Once the message type has been created, we need to create a contract
-- that specifies who can send what types of messages
CREATE CONTRACT JobRequestor
(JobRequest SENT BY INITIATOR)
GO
-- The communication is between two endpoints. Thus, we need two queues to
-- hold messages
CREATE QUEUE RequestorQueue
CREATE QUEUE ReceiverQueue
GO
-- Create the required services and bind them to be above created queues
CREATE SERVICE Requestor
ON QUEUE RequestorQueue
CREATE SERVICE Receiver
ON QUEUE ReceiverQueue (JobRequestor)
GO
-- At this point, we can begin the conversation between the two services by
-- sending messages
DECLARE @conversationHandle UNIQUEIDENTIFIER
DECLARE @message NVARCHAR(100)
BEGIN
BEGIN TRANSACTION;
BEGIN DIALOG @conversationHandle
FROM SERVICE Requestor
TO SERVICE 'Receiver'
ON CONTRACT JobRequestor
WITH ENCRYPTION=OFF, LIFETIME= 600;
-- Send a message on the conversation
SET @message = N'Hello, World';
SEND ON CONVERSATION @conversationHandle
MESSAGE TYPE JobRequest (@message)
COMMIT TRANSACTION
END
GO
-- Receive a message from the queue
RECEIVE CONVERT(NVARCHAR(max), message_body) AS message
FROM ReceiverQueue
-- Cleanup
DROP SERVICE Sender
DROP SERVICE Receiver
DROP QUEUE SenderQueue
DROP QUEUE ReceiverQueue
DROP CONTRACT HelloContract
DROP MESSAGE TYPE HelloMessage
GO
This all works fine but if I run the section that creates the message and then copy the RECEIVE section to a new query window and execute it, nothing is returned. If I run the RECEIVE section within the same query window it returns the 'Hello World' message as expected. I am new to Service Broker and so am assuming that I am missing something obvious!!
View 5 Replies
View Related
Apr 11, 2006
I've got the following update statement:
UPDATE ISSUE_ACTIONS
SET BAE_FLAG = 2
WHERE IA_ISSUE_NO = 399
AND IA_SEQUENCE = 20
The fields BAE_FLAG, IA_ISSUE_NO, and IA_SEQUENCE are all of the type int.
When I run this code inside of my windows app (C#),
cmd3.CommandText = "UPDATE ISSUE_ACTIONS " +
"SET BAE_FLAG = 2 " +
"WHERE IA_ISSUE_NO = 437 " +
"AND IA_SEQUENCE = 13";
try
{
cmd3.ExecuteNonQuery();
}
catch (Exception e)
{
throw (e);
}
I get a timeout error:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated.
But when I run the SAME statement from Query Analyzer, it executes without a problem.
Has anyone run into this issue before? How do I get around this?
The CommandTimeout property of cmd3 is set to the default because this is not a complex query and should not take more than .5 seconds to execute.
View 5 Replies
View Related
Dec 17, 2007
Hi..
I have inserted couple of data in a particular table which is as follows..
Portfolio Table
PortId PlanId PortfolioName PorfolioDescription ClientPortolioId
771
17838
BALPORT
NULL
NULL
772
17838
HIGHGROW
NULL
NULL
773
17838
MODGROW
NULL
NULLMy FundDBF is as follows
RowNumber FUND_ID f.ASSETDESC Import
20
BALPORT
Balanced
True
21
MODGROW
Moderate Growth
True
22
HIGHGROW
High Growth
True
and this is my Update statement UPDATE
Statements..PlanPortfolio
SET
PlanId = pm.PlanId,
PortfolioName = pm.FUND_ID,
PortfolioDescription = pm.ASSETDESC
FROM
Statements..PlanPortfolio p
Join (
SELECT DISTINCT
p.PlanId,
pd.FUND_ID,
f.ASSETDESC ---pd.FUND_ID
FROM
PartDBF pd
INNER JOIN Statements..ClientPlan p
on pd.PLAN_NUM = p.ClientPlanId
INNER JOIN FundDBF f
on pd.FUND_ID = f.FUND_ID
WHERE
pd.Import = 1
AND NOT (
pd.FUND_ID IS NULL
OR
Len(pd.FUND_ID) = 0
OR
pd.FUND_ID NOT IN (
SELECT
PortfolioName
FROM
Statements..PlanPortfolio pp
Where
pp.PlanId = p.PlanId
)
)
) pm
on p.PlanId = pm.PlanId
I am trying to put the above table with f,AssetDesc in the PorfolioDescription field..
Any help will be appreciated..
Regards
Karen
View 17 Replies
View Related
May 21, 2008
myCommand2.CommandText = "INSERT INTO testimonials(name,email,testimonial,approved,time) VALUES ('" + exp.escString(txtName.Text) + "','" + exp.escString(txtEmail.Text) + "','" + txtTestimonial.Text + "','" + false + "','" + DateTime.Now + "')"; ok the form has a field txtTestimonial.Text these strings work when i submit them thoughthats all folksthat"s (double quotes) that\"sthat\"s these failthat's that's that\'s that\'s tried up to 7 just to make sure Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 's'.Unclosed quotation mark after the character string ')'. I figure the " works because it ends up being ' " ' in the sql statement and it doesnt mind thatI tried researching this. I could not find any info stating that perhaps sql escapes things differently. I was on the assumption that in the sql itself the database would reconise the before the '.I read i can use html decode but it seems that then i will have to undecode everytime I read from the database and it could be a major pain if I am using a datagrid or something and a big mess. Any help would be greatly appreciated. Jim
View 5 Replies
View Related
Jun 13, 2008
When I debug my code I see the string going into the parameter correclty, but the the delete statement doesnt work and I'm not sure why. Does this look ok? // Set up SqlCommand, connection to db, sql statement, etc.
SqlCommand DeleteCommand = new SqlCommand();
DeleteCommand.Connection = DBConnectionClass.myConnection;
DeleteCommand.CommandType = CommandType.Text;
// Store Primary Key photoID passed here from DeleteRows_Click
// in a parameter for DeleteCommand
SqlParameter DeletePrimaryKeyParam = new SqlParameter();
DeletePrimaryKeyParam.ParameterName = "@PhotoID";
DeletePrimaryKeyParam.Value = photoID.ToString();
// Insert new parameter into command object
DeleteCommand.Parameters.Add(DeletePrimaryKeyParam);
// Delete row, open connection, execute, close connection
DeleteCommand.CommandText = "Delete From Photo_TBL where PhotoID IN (@PhotoID)";
Response.Write(DeleteCommand.CommandText);
// DeleteCommand.Connection.Close();
DeleteCommand.Connection.Open();
DeleteCommand.ExecuteNonQuery();
DeleteCommand.Connection.Close();
View 9 Replies
View Related
Nov 6, 2006
hi.
can somebody explain to me why the below
update fails to update one row and updates
the entire table?
Code:
UPDATE addlist
SET add_s = 1
WHERE EXISTS
(SELECT a.add_s, a.email_address, e.public_name
FROM add a, edit e
WHERE a.email_address = e.email_address
and a.add_email = 'mags23@rice.edu' and a.add_s = 0 and e.public_name = 'professor');
and, what is the solution? thank you.
View 8 Replies
View Related
Mar 23, 2008
Hi,
I have a textbox,in which I am allowing user to write the username starting with,user should enter minimum 3 characters, atleast,and when they enter that information, all the names starting with those 3 characters shouls be shown.can any one help me in this.
my query is:
"select username from registration where username like '" + TextBox1.Text + "%'";
It is working with one char,but if I write more than one character in the textbox,it is not creating any error but it is not returning the result.
View 2 Replies
View Related
May 29, 2014
I have a situation where I want to update a column if and only if it is null.
UPDATE Employee
SET VEmployeeID = CASE WHEN E.VEmployeeID IS NULL
THEN ves.VEmployeeID
END
FROM Employee E
INNER JOIN VEmployeeStaging VES
ON E.EID= VES.EID
But what happens is when I run the procedure every other time I run it, it changes everything to null. The other times it puts the VEmployeeID in.
So what is happening is the times when it is not null (where it is not supposed to do anything) it puts a null in. The next time it works.
View 6 Replies
View Related
Oct 7, 2015
In a t-sql 2012 merge statement that is listed below, the insert statement on the merge statement listed below is not working. The update statement works though.
Merge test.dbo.LockCombination AS LKC1
USING
(select LKC.lockID,LKC.seq,A.lockCombo1,A.schoolnumber
from
[Inputtb] A
JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type
JOIN test.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber = LKR.number
[code]...
Thus would you tell me what I need to do to make the insert statement work on the merge statement listed above?
View 10 Replies
View Related
Oct 7, 2015
In a t-sql 2012 merge statement that is listed below, the insert statement on the merge statement listed below is not working. The update statement works though.
Merge test.dbo.LockCombination AS LKC1
USING
(select LKC.lockID,LKC.seq,A.lockCombo1,A.schoolnumber
from
[Inputtb] A
JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type
[Code] ....
Thus would you tell me what I need to do to make the insert statement work on the merge statement listed above?
View 6 Replies
View Related
Aug 11, 2007
here is my code:
Dim cn As New System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("LocalSqlServer").ToString())
cn.Open()
Dim adapter1 As New System.Data.SqlClient.SqlDataAdapter()
adapter1.SelectCommand = New Data.SqlClient.SqlCommand("update aspnet_Membership_BasicAccess.Products
set id = '" & textid.Text & "', name = '" & textname.Text & "', price = '" & textprice.Text & "', description = '" &
textdescription.Text & "', count = '" & textcount.Text & "', pictureadd = '" & textpictureadd.Text & "', artist = '" &textartist.Text & "', catergory = '" & textcategory.text & "' where id = " & Request.Item("id") & ";", cn)
cn.Close()
Response.Redirect("database.aspx")
it posts and the page loads but the data is still the same in my datagrid. what could be wrong with this simple statement... i've tried testing the statement above with constant values of the correct type but i don't think that matters because the SqlCommand() accepts a string only anyways.. doesn't it?
View 5 Replies
View Related
Apr 25, 2006
Hi,
[I'm using VWD Express (ASP.NET 2.0)]
Please help me understand why the following code, containing an inline SQL SELECT query (in bold) works, while the one after it (using a Stored Procedure) doesn't:
<asp:DropDownList ID="ddlContacts" runat="server" AutoPostBack="True" DataSourceID="SqlDataSource2"
DataTextField="ContactNameNumber" DataValueField="ContactID" Font-Names="Tahoma"
Font-Size="10pt" OnDataBound="ddlContacts_DataBound" OnSelectedIndexChanged="ddlContacts_SelectedIndexChanged" Width="218px">
</asp:DropDownList> <asp:Button ID="btnImport" runat="server" Text="Import" />
<asp:Button ID="Button2" runat="server" OnClick="btnNewAccount_Click" Text="New" />
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:ICLConnectionString %>"
SelectCommand="SELECT Contacts.ContactID, Contacts.ContactLastName + ', ' + Contacts.ContactFirstName + ' - ' + Contacts.ContactNumber AS ContactNameNumber FROM Contacts INNER JOIN AccountContactLink ON Contacts.ContactID = AccountContactLink.ContactID WHERE (AccountContactLink.AccountID = @AccountID) ORDER BY ContactNameNumber">
<SelectParameters>
<asp:ControlParameter ControlID="ddlAccounts" Name="AccountID" PropertyName="SelectedValue" />
</SelectParameters>
</asp:SqlDataSource>
View 3 Replies
View Related
Nov 3, 2015
The select statement:
SELECT DATEDIFF(n , LAG(CAST(Date AS DATETIME) + CAST(Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ),
CAST(Date AS DATETIME) + CAST(Time AS DATETIME))
FROM [DataGapTest]
Gives the right output:
NULL
1
1
3548
0
However, when I put the statement in a function, I get only zeros as the output. It's as if the lag and current value are always the same (but they are not of course).
CREATE FUNCTION dbo.GetTimeInterval(@DATE date, @TIME time)
RETURNS INT
AS
BEGIN
DECLARE @timeInterval INT
SELECT @timeInterval = DATEDIFF(n , LAG(CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ),
CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME))
FROM dbo.[DataGapTest]
RETURN @timeInterval
END
View 5 Replies
View Related
Mar 3, 2006
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
View 5 Replies
View Related
Jan 7, 2004
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
View 2 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
Nov 5, 2015
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
View 2 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Feb 4, 2006
I am using ASP.NET 2.0, and am attempting to write some code to connect to the database and query a data table. The compiler is not recognizing my SqlConnection statement. It does recognize other commands. And just to make sure, I created other sql objects such as ObjectDataSource and SqlDataSource. The compiler does not find a problem with that code.
Basically the compiler is telling me that I am missing a "using" directive. The compiler is wrong though, because I am including the statement "usingSystemData" Can someone please take a look at my code below and to see if you notice what the problem might be? Note that I numbered the lines of code below. Note that I also tried putting lines 3 trhough 6 before line 2(The page directive) but that did not fix the problem The compiler still gives me the same compiler message.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request.Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'SqlConnection' could not be found (are you missing a using directive or an assembly reference?)Source Error:
Line 21: SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
1 <asp:sqldatasource runat="server"></asp:sqldatasource>
2 <%@ Page Language="C#"%>
3 using System;
4 using System.Data;
5 using System.Collections;
6 using System.Data.SqlClient;
7
8 <script runat=server>
9
10 protected void Page_Load(object o, EventArgs e)
11 {
12 ObjectDataSource dsa; // This works no problems from the compiler here
13 SqlDataSource ds; // This works no problems from the compiler
14
15 if (IsPostBack)
16 {
17 if (AuthenticateUser(txtUsername.Text,txtPassword.Text))
18 {
19 instructions.Text = "Congratulations, your authenticated!";
20 instructions.ForeColor = System.Drawing.Color.Red;
21 SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
22 String sqlStmt = "Select UserName from LogIn where UserName='" + txtUsername.Text + "' and password='" + sHashedPassword + "'";
23 }
24 else
25 {
26 instructions.Text = "Please try again!";
27 instructions.ForeColor = System.Drawing.Color.Red;
28 }
29 }
30
31 }
32
33 bool AuthenticateUser(string username, string password)
34 {
35 // Authentication code goes here
36
37 }
View 1 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
