Is there some way to limit the amount of memmory grabbed by SQLEXPRESS as there is with SQL 2000? TaskManager shows it taking 1.4 gig on my server. 2 gig total memory in the machine. I'd like to limit it to someting less.
View 3 RepliesI'm having problems with SQL 2005 Express Edition exceeding the maximum memory limit. I hard set the minimum to 100 and the maximum to 500, but the server is currently using over 800MB and is causing the system to page. Has anyone had any experience with similar issues and if so how did you resolve them.
View 8 Replies View RelatedSQL Server 2000 SP3 on a Dell dual 2.4GHz Xeon box 3GB RAM Windows 2KSP4. Two aplication dbs, each less than 2GB in size.Had a problem where we would run Solomon queries and what not againstthe box. It had 2GB RAM, and sqlserv.exe would take up to 1.85GB ofRAM, exhausting the physical RAM on the box. SQL would choke and theSolomon users would have problems, and I would have to restart the SQLservice.I added another GB of RAM, bringing the box to 3GB, and increased thepaging file. The OS sees it, and SQL sees it. I check EnterpriseManager, and tell SQL to dynamically configure memory, and it offers anupper limit of 3071MB, so it "sees" the 3GB.I can stress the box with queries to the point that sqlserv.exe takes1.99GB of memory (as viewed through Task Manager) and then SQL serverchokes. It never goes past 2GB, and the OS and box continue runningfine.Does SQL server 2000 have some upper limit, or do I just need to changesome setting through EM?Thanks.
View 2 Replies View RelatedHello,
I was wondering if there was a setting or a way to limit or restrict the amount of Memory an SSIS package can use? I know that by default the windows OS limits a process (a package in this case) to 2GB and up to 3GB with AWE enable but what if I wanted to say Limit it to 1GB of memory is there anyway to do that? Is there an SSIS Engine setting or Package property somewhere?
Thanks!
Hi,
I have a small sized db (size doesnt goes on 50mb - currently its 15mb ) on my computer and my application uses that db.
Normall SQL Service uses 50-60 mb of system memory.
But after some heavy usage SQL 2005 express Services memory usage goes near 1GB and sometimes SQL Service stops itself.
Does SQL 2005 express stops itself when it reaches the 1GB memory limitation?
Regards,
Cem
Does the aspnet_wp.exe get considered in memory limitations for SQL Express? (1GB limit) I'm asking because I run the Reporting Services on the same box (this is required with SQLE). When I run reports, it seems much of the work is in the aspnet_wp.exe process, so I'm trying to determine if running reports will get considered in the 1GB memory limit of SQLE. I know, however, that the ReportServer database and the ReportServerTempDB database WILL get included in the 1GB limit, but am trying to figure out if the aspnet_wp.exe process gets considered as well when it is running reports.
Thanks,
Michael
I can't start SQLEXPRESS.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
hiya,
I have sqlExpress and sqlServerManagementStudio on my XP pro box.
Will the installation of sqlExpress (Advanced Services) cause any problems?IS thereanything that I shold be aware of in advance?
many thanks,
yogi
Hi All,
I have created an installation application which will install the application with SQL Express and .NET Framework 2.0.
If i install this application in a Fresh system(i.e which is not having SQL Express), it is installing the application with new database instance successfully.
But if i try to install the same in a system which is already having SQL Express, throwing "Object reference exception" because it is not able to create the new database instance.
Can anybody help me out .
Regards,
Doppalapudi.
Because of numerous problems trying to get sqlexpress working, I uninstalled it with the intention of reinstalling (via Add or Remove Programs). However, now when I try to reinstall it, I get a message that the I am not making a changes so it won't let me install it.
I do have sql server 2005 developer's edition installed; is that the reason? and does that mean I cannot have both installed on the same machine?
Hi All,I've been struggling with this for hours...Could someone please advise me on how to convert my current File based SQL Server Express website to a Server based SQL Express one.Particularly interested in what I need to do in the SQL Express management tool, changes I need to make the projecvt itself and changes needed to get IIS to understand things have been changed.Thanks,Martin.
View 1 Replies View RelatedI am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running. And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies View RelatedHello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
I am running Visual Studio 2005. I have an SSIS Package which is consuming a huge amount of memory. During the execution of the package the memory keeps increasing. Until finally i get an Out of Memory exception. I have run this package using dtexec, and in the BIDS. No difference. I do have some script components and have added some code to get the assemblies in the current appdomain. I do see that one particular assembly is increasing on every loop. VBAssembly every time it hits the script component is increasing by 6, and along with it the memory is climbing. What is this VBAssembly being used for is there an update to SQL Server Integration Services that I need?
Thanks! Aaron B.
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
i want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
I've a database with a memory optimized filegroup on it. How can I remove it?I have removed the memory optimized table I had on it, but when I try to remove the filegroup I receive an error.
View 12 Replies View RelatedHi,
I am going to install SQL Server 2000 (then SQL 2K5) on a Win Server 2K3 with 8 GB of ram, but it will be 16 GB in the near future.
I would like to reserve a fixed memory (for momemt less than 3-4 GB) for SQL Server and the rest for application (virtualization).
Without AWE enabled, max memory for SQL Server 2K5 is 4GB as for SQL Server 2000?
How can I manage and optimize memory keeping in mind AWE. (any doc, website available?)
Thank
So I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
• This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
• The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
Hello frnds Can Anybody explai what does it mean by question itself and how to resole it ?
View 2 Replies View RelatedHi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
Hi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)?
For example, how much insert row at below sample?(the max value of nCount)
for(i=0 ; i<nCount ; i++)
{
pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData));
}
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ?
BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
-------------------------------------------------------
My solution is like this. Is it correct?
// CoCreateInstance(...);
// Data source
// Create session
m_TableID.uName.pwszName = m_wszTableName;
m_TableID.eKind = DBKIND_NAME;
DBPROP rgProps[1];
DBPROPSET PropSet[1];
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BSTR;
rgProps[0].dwPropertyID = SSPROP_FASTLOADOPTIONS;
rgProps[0].vValue.bstrVal = L"ROWS_PER_BATCH = 10000,TABLOCK";
PropSet[0].rgProperties = rgProps;
PropSet[0].cProperties = 1;
PropSet[0].guidPropertySet = DBPROPSET_SQLSERVERROWSET;
if(m_pIOpenRowset)
{
if(FAILED(m_pIOpenRowset->OpenRowset(NULL,&m_TableID,NULL,IID_IRowsetFastLoad,1,PropSet,(LPUNKNOWN*)&m_pIRowsetFastLoad)))
{
return FALSE;
}
}
else
{
return FALSE;
}
Hi there guys!
I was wondering if anyone know the number of rows you can import from an external source into MS SQL Server 2000 Developer Edition?
I have tried importing a whole table from another database with over a million records. But failed after 1.7 million row.
Any ideas?
Thank you!
When creating a database, SQL Server 6.5 seems to have a 2 gig limit. What I mean is that if the device chosen is over 2 gigs SQL Server displays the size of the device as anegative number. This prevents me from being able to expand the database when I need to. Can anyone tell me why this is so, and if there`s anyway around it??
View 1 Replies View Relatedwe all know
mysql: select * from table limit ?1, ?2
equals
sqlserver: SELECT TOP ?2 *
FROM table WHERE (IDENTITYCOL NOT IN
(SELECT TOP ?1 IDENTITYCOL
FROM table order by IDENTITYCOL))
order by IDENTITYCOL
but the below SQL in mysql,how to convert?I enmesh...........
select pageid,pagename,pageaddr,pageauditflag,pageartaudi tflag,startplaytime
from pageinfo where entryid= ?1 and startplaytime= ?2
limit ?3, ?4
thanks!
hi,I have a question.Maybe You know the equivalent to command LIMIT from MySQLI couldn`t find something like this in MS SQLPSI try to display 10 records begining form e.g. 4 sort by idsomething like: "SELECT * FROM table WHERE name=... LIMIT 4, 10 ORDER BY id"in MySQLthanx,Urban
View 2 Replies View RelatedHi There
I recently read up and found an msdn forum post that said the 4gb limit only applied to data files not log files.
However recently i had an error on a sql express database saying that the log file was full, the database log file was set to auto grow and there was plenty of space left.
So i am guessing the 4gb limit applies to any database file mdf or ldf, is this correct ?
Thanx
Hi
I'm pretty new to all of this. I downloded a starter kit and am a bit confised as to SQLExpress. I have SQL Server already installed and just wondering what the option are.
I am currently using Visual Web Developer Express Edition and in the config file data source is SQLExpress and can't go any further. I don't want to mess with my current setup so just want to get some sugestions first.
Anyway hope this makes sense.
Thanks
GP
I have just created a website with membership just using the standard SqlExpress auto generated file
Everything works fine until I upload it to webspace :(
I get the following Error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I don't have SQL Server 2005 :(
if my SQl server/COnnection is "SQL EXPRESS"..Im using an Import name "Import System.SqlClient" on every web form that i have...
as well as other SQl command name like "SQLConnection,SQLCommand etc..."is this the correct that im using all sqlcommand in my webform???
well sorry for this im just new..and one more thing..can i include Ado.net on it if my connection is "SQLEXPRESS" just i said?
Thanks for the answer....