Hello out there,
I try to force my users to select a date not more than 6 months in the past. How can I limit the range of dateselection in the reportparameter? Any ideas?
Thank you very much!
Kind regards
dollmaker
In SSRS report I have 2 parameters start date and end date, so when somebody is selecting end date more than a month(if today date is 22 then they are selecting aug 23) then it should give error message to user like "Date out of range".
View 2 Replies View RelatedI'm running a pre-defined script which used to work fine on a file which was resupplied every month. below is the script used and the error message. looking at the error I assume that there is a rouge record within the file but have looked in Textpad and cannot find it.
UPDATE [matching].[dbo].[hot_nov] SET [AOV] = (CAST([Demand] AS DECIMAL)/CAST([Orders] AS INT)) WHERE [Demand] <> '';
UPDATE [matching].[dbo].[hot_nov] SET [POST2] = left([PostCode], PATINDEX('%[0-9]%', [PostCode] + '1') - 1) ;
UPDATE [matching].[dbo].[hot_nov] SET [POST4] = left([PostCode],LEN([PostCode])-4);
UPDATE [matching].[dbo].[hot_nov] SET [POST6] = left([PostCode],LEN([PostCode])-2);
error message
(1000 row(s) affected)
Msg 245, Level 16, State 1, Line 181
Conversion failed when converting the varchar value '2014-09-03 00:00:00' to data type int.
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
Have seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
I have a need to select rows where values in a column are within a range AND ALSO the first row that is highest (MAX) but just UNDER the range. For example:
NAME VAL
Jim 4
John 5
Tom 6
Julie 7
Rich 8
Rob 9
RANGE TO SELECT is 6-8 (inclusive)
Rows with a value in the range are returned (6, 7, & 8) as well as the row with a highest value that is JUST BELOW the range (5)
NAME VAL
John 5
Tom 6
Julie 7
Rich 8
Hi groupmates,
In MySQL, we can use limit for our selection. E.g.
select * from mytable limit 10, 20
means selecting [20] records of all information from the table [mytable] from the [10]th record
But in MS SQL, what can we do? Please help.
I am writing PHP to retrieve small data from a large volume of database. Please help
-stan
In other SQL programs I have seen the use of Limit to tell it how many rows to return.
Is there an equivalent in MS-SQL that will let me do a quick Select clause and tell it how many rows to return.
In other words if I just wanted to see the first 10 rows what would I add to Select * from tableA
Thanks!
Does there's any length limit on the XML returned by SELECT FOR XML AUTO?
View 5 Replies View RelatedHi there,
I have a database table with a field to specify the username of records that particular user is allowed to access (read only). I want to be certain the user does not have access to any other records. So I'm using a stored procedure to query the table with "WHERE dbuser = USER".
My problem is that the stored procedure is returning an error that the table I'm querying cannot be found, and I suspect it is because the user does not have proper permissions to see those tables, even through the stored procedure.
So my question is, how do I grant the user sufficient access for this stored procedure to work without outright granting them select permission on the tables?
Much appreciated!
I have the following table:
ID - Reference - Number
1 - null - 9000
2 - null - 9001
3 - 123 - 9002
4 - 123 - 9003
5 - null - 9004
6 - null - 9005
7 - null - 9006
I need to return the next (TOP 3) consecutive rows where Reference is null. In this case, 9004-9006. I assume a "having" clause but I'm not sure how to do this.
I have a select that is grouped by building/bedrooms and I have a rangefor the rentSelect Building,BR,drpBuilding.buildID,'$' + Cast(Min(Rent/BR) as varchar(10)) + '-' + Cast(MAX(Rent/BR) asvarchar(10)) as 'PerPerson'FROM Apt JOIN drpBuilding ONApt.buildID = drpBuilding.buildIDGroup By Building,drpBuilding.buildID,BRNow I want to only show a range if the rent varies, ie. I don't want toshow the range as being 510-510 I would then like just a single valuedisplayed. How can I do such a select?Thanks in advance,Mark Meadows
View 1 Replies View RelatedMessage:
Hi,
Suppose i execute a query,
Select * from emp,
I get 100 rows of result, i want to write a sql query similar to the one available in MySql database where in i can specify the starting row and number of rows of records i want,
something like,
select * from emp LIMIT 10,20
I want all the records from the 10th row to the 20th row.
This would be helpful for me to do paging in the front end , where is i can navigate to the next previous buttons and fetch the corresponding records.
I want to do something like in google, previous next screens.
So I am trying to limit the number of rows fetched from a query.
somethin like,
select * from emp where startRowNum=10 and NoOfRecords = 20
so that i can get rows from 10 to 30.
Has any1 done this, plz let me know.
Cheers,
Prashant.
I currently use this query to select 4000 contacts from our database:
SELECT TOP 4000 * FROM wce_contact
where website not like ''
and expressemail like '%@%'
and idstatus like ''
and salutation not like '%there%'
and task not like '%x%'
So I use this query to send out emails, then I want the next set of contacts, so I am obv after the contacts 4001 to 8000. How would I right this into the above query?
Hope it all makes sense?
JT
Hi guys,whilst working on a project which I thought was nearly complete I havecome across a problem which was some how over seen, which I am hopingone of you guys know how to resovle.Firstly here is the script to create the table and insert some sampledata:CREATE TABLE [dbo].[tbltemp999] ([Machine_Name] [char] (17) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[EventDate] [datetime] NOT NULL ,[EventID] [int] NOT NULL) ON [PRIMARY]GOINSERT INTO tbltemp999 VALUES ('MOBL','2004-08-16 12:05:14.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-08-16 12:08:32.000',6005)INSERT INTO tbltemp999 VALUES ('MOBL','2004-09-22 12:24:45.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-09-22 12:28:25.000',6005)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-03 17:53:38.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-03 17:57:02.000',6005)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-04 12:09:10.000',6006)INSERT INTO tbltemp999 VALUES ('MOBL','2004-11-04 12:12:48.000',6005)The EventID 6006 represents a system shut down, and the EventID 6005represents a sytem start. Therefore from the above data you cans seethat the machine is not rebooted very often.My problem occurs when you select a date BETWEEN something where thereis no data. ie BETWEEN 2004-10-01 AND 2004-10-15 my desired resultfrom this should return 15 days of uptime but as there is no data itis returning nothing:(Can anyone work this one out?ThanksSunny
View 7 Replies View RelatedI am a newbie to SQL Server.
I have a problem, in filtering the records returned by a query.
I have a table which contains 1 million records, it has a user defined primary key which is of character type.
The problem is i need to filter the output of a select query on the table based on two parameters i send to that query.
The first parameter will be the starting row number and the second one is the ending row number.
I need a procedure to do this.
For Eg:
MyProc_GetRowsFromBigTable(startRowNo,endRowNo) should get me only the rows in the specified range.
Thanks in advance,
Raghavan.S
Hi all,Right now I have this SELECT statement:SELECT MUSIC_PK, MUSIC_TITLE, MUSIC_TITLE2, MUSIC_ORIGINAL_SINGER Now I want to add a second SELECT statement (same as above, but with an additional column) if the record was added within the 10 days (while still select other records, I just need to select an additional column). How would I do that? The additional column that I want to select is called MUSIC_NEW (so I can display if the record is new within 10 days.) I have a column in my table named DATE_ADDED, how do I go to calculate if it's within the 10 days since the day it was added to the current time?Thank you very much,Kenny.
View 8 Replies View Related Hi,I'm
apologizing in advance for using someone else's brainpower on what is
basically a logic problem rather than a creative use of T-SQL, but it's
doing me head in.I have a table which contains information on
bookings for runs of advertising. This includes a BookingStart dateTime
field and a BookingEnd datetime field. Between BookingStart and
BookingEnd an ad is considered to be "live".What I need to do
is construct a query which, given a start date and and end date returns
a count of all the records which were "live" between those dates and -
here's the catch - each week must count separately. In other words if
my query asks for data across four weeks, and an ad was "live" for two
of those weeks, it should return a count of two.Any help much appreciated.Cheers,Matt
I have a series of "Payroll Periods", called S1 thru S26 for the year. I want to create a parameter call "Pay Period" and have the user select a single pay period, i.e. S13. Elsewhere I know the beginning and ending date for each pay period, but it is in another dataset. So if the user selects S13 and I know the 13th pay period is April 1st thru April 15th, how do I use those dates as my beginning and end dates for my SQL query statement to return only the data from the selected pay period. The data itself has dates and not pay period references.
View 1 Replies View RelatedI have a table with the following data:
Type Date Subtype
1 1-1-2015 10
1 5-1-2015 10
1 6-1-2015 10
1 15-1-2015 11
1 20-1-2015 10
[Code] ....
I want to group by the data to the following while saving the first and last date within each type and subtype:
type startdate enddate subtype
1 1-1-2015 6-1-2015 10
1 15-1-2015 15-1-2015 11
1 20-1-2015 22-1-2015 10
1 25-1-2015 28-1-2015 12
2 2-1-2015 5-1-2015 11
2 6-1-2015 7-1-2015 12
2 14-1-2015 20-1-2015 11
2 23-1-2015 30-1-2015 13
I tried several approaches, but I can't fnd a solution to do this with T-SQL.
I have a table has following fields(Process, datestart,dateend,datedue,,,,)
Process datestart dateend ...
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
C 24.07.2014 30.07.2014
What i want when user enters from date and end date. i want to filter records which are fallen between those two input dates.
if user enters 17.07.2014 and 20.07.2014 as input range. query should show only A and B process as
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
Can someone show me what I need to do to have a result set only displaying records from the specified date range. All the tables can relate on Date, shift, and ProductType (Besides UnprocessedProductTracking which can only relate on Date and Shift) I have a lot of trouble with joins...well I'm just not to experienced. Help!
CREATE Procedure dbo.spButterMarTotals
(
@fromdate smalldatetime,
@todate smalldatetime
)
AS
--
--Exec spButterMarTotals '11/15/06','11/15/06'
--
--
Select Distinct ButterballsThrownPounds, ReworkUsedPounds, ReworkMadePounds, CoolersUsedPounds, CoolersMadePounds, TrucksMadePounds,
ResidualFilmPounds, ResidualSqueezePounds, ProducedPounds, Blocks As ProcessingThrown, Weight AS NFCPounds, Pounds AS BirdsEyePounds,
T1AL50Type, T2Type, T3Type, T4Type, AL51Type, FillMach1Type
from tblproductionMaterialmetrics A
Inner Join tblNFCTracking B on
A.ProductType = B.ProductType
Inner Join tblProcessingDtl C on
C.ProductType = B.ProductType
Inner Join tblIngredientProduction D on
D.shift = C.shift
Inner Join tblUnprocessedProductTracking E on
D.shift = C.Shift
Where A.Date between @Fromdate and @todate
I have a situation where an agent has number of activities for a certain date range. If an agent has multiple activities within certain date range, I would like BALANCE BEFORE from the first activity and BALANCE AFTER from the last activity. Here is my current SQL query that returns the following data:
DECLARE @BeginDate Datetime
DECLARE @EndDate Datetime
Set @BeginDate = '05-1-2015'
Set @EndDate = '05-31-2015'
SELECT
a.AgentName,
R.BALANCEBEFORE,
[Code] ....
AGENTNAME BALANCE BEFORE BALANCE AFTER DATE
DOUGLAS 9738.75 9782.75 2015-05-11
DOUGLAS 9782.75 9804.75 2015-05-12
DOUGLAS 9804.75 9837.75 2015-05-13
In the sample data above, ideally I would like my query to return data as follow:
AGENTNAME BALANCE BEFORE BALANCE AFTER
DOUGLAS 9738.75 (from first activity) 9837.75 (from last activity)
Not sure how I can write sql query to accomplish this.
Hi all,I am getting this error when insert values from one table to another inthe first table the values are varchar (10). In the second they aredatetime. The format of the data is mm/dd/yyyy to be easily convertedto dates. The conversion in this case is implicit as indicated in SQLServer documentation. Here is my query:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionUNIONSELECT program_id + 100000, program_name, start_date, end_date,campaign_id AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.programsUNIONSELECT execution_id + 200000, execution_name, start_date,end_date, program_id + 100000 AS ParentID, NULL AS ListIDFROM mysqlfactiva.dbo.executionsUNIONSELECT wave_id + 300000, wave_name, start_date, end_date,mysqlfactiva.dbo.waves.execution_id + 200000 AS ParentID, NULL ASListIDFROM mysqlfactiva.dbo.waves, mysqlfactiva.dbo.executionsWHERE mysqlfactiva.dbo.waves.execution_id =mysqlfactiva.dbo.executions.execution_idI am referencing programs table two times. If I just select this all Iget all data I need. When doing insert I get a message:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value. The statement has been terminated.If I execute just first part of the query before first union, I insertdata fine:INSERT INTO Campaign (CampaignID, Name, DateStart, DateEnd, ParentID,ListID)SELECT mysqlfactiva.dbo.campaigns.campaign_id AS CampaignID,mysqlfactiva.dbo.campaigns.campaign_name AS Name,MIN(mysqlfactiva.dbo.programs.start_date) AS DateStart,MIN(mysqlfactiva.dbo.programs.end_date) AS DateEnd,NULL AS ParentID,NULL AS ListIDFROM mysqlfactiva.dbo.campaigns, mysqlfactiva.dbo.programsWHERE mysqlfactiva.dbo.campaigns.campaign_id =mysqlfactiva.dbo.programs.campaign_idGROUP BY mysqlfactiva.dbo.campaigns.campaign_id,mysqlfactiva.dbo.campaigns.campaign_name,mysqlfactiva.dbo.campaigns.descriptionAs soon as I use union I get the above error. This is very strangesince even when I execute the query using first union where the datescome from the same table 'programs' I get the error. Why I can insertfrom programs first time and can's second time?Any help will be appreciated.Thanks,Stan
View 1 Replies View RelatedI am in the midst of writing a query to return a range of product BIN LOCATIONS from a warehouse stock levels program.I know the start and end BIN LOCATIONS for the warehouse, e.g.: Start - #00000, and End - Z10000.However I cannot hard code these into the program, instead I want my operator to designate the first letter of both the start and end BINS locations, and then hit the 'go button'.Towards this end I have declared a couple of variables in my SQL, as follows -
Code:
declare @strBin varchar(10)
set @strBin = ''
if @strBin = ''
set @strBin = '#%'
declare @endBin varchar(10)
if @endBin = ''
set @endBin = 'z%'
My challenge is writing a relevant WHERE clause for my select statement, I have tried the following -
Code:
where BINLOCAT.BINLABEL between @strBin and @endBin
order by BINLOCAT.BINLABEL
Whilst the clause above does not cause any errors, neither does it return any results.My first thought is that the BETWEEN operator does not accept wildcards. But if this is correct then how do I go about allowing an operator to enter the start, and end BINS without typing the entire BIN string (e.g.: #00000)? I have tried >= @strBin and <= @endBin, but I am having a similar issue with no errors, and no data returned.
I have an Orders table which has the following fields:
OrderID (PK, int, auto increment, not null)
CustomerID (FK, int, null)
PaymentDate (datetime, null)
UserID (uniqueidentifier)
(and other irrelevant fields)
Basically, for a specific PaymentDate range (29th July 2014 - 26th August 2014, inclusive) I want to select all orders where they only appear once in the orders table based on the CustomerID, so I only want to know about them if they have a paid order (decided by PaymentDate not being null) in that date range, but also taking into account if they have ever had a paid order outside of that date range. I'll also be joining on to the aspnet_Users table to get the username assigned to that order.
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View RelatedI'm using PHP with SQLServer2k to create a page containing monthly counts of episodes at a facility occurring between two user selected month/year combinations. For instance, the user could select 10/2003 and 2/2004 and facility X and get a line for each month showing the count of episodes occuring in that month.
The problem is that the episode date is stored in three integer fields (epiday, epimonth, epiyear) and I'm having a terrible time getting them into a format where I can use them in a between statement.
I've tried evaluating the parts of the episode date seperately like:
where
(epimonth>=10 and epiyear=2003)
or
(epimonth<=2 and epiyear=2004)
and that works, but what happens when someone wants to see from 10/2002 to 2/2004?
Any suggestions on the best way to do this?
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
Hi there guys!
I was wondering if anyone know the number of rows you can import from an external source into MS SQL Server 2000 Developer Edition?
I have tried importing a whole table from another database with over a million records. But failed after 1.7 million row.
Any ideas?
Thank you!
When creating a database, SQL Server 6.5 seems to have a 2 gig limit. What I mean is that if the device chosen is over 2 gigs SQL Server displays the size of the device as anegative number. This prevents me from being able to expand the database when I need to. Can anyone tell me why this is so, and if there`s anyway around it??
View 1 Replies View Relatedwe all know
mysql: select * from table limit ?1, ?2
equals
sqlserver: SELECT TOP ?2 *
FROM table WHERE (IDENTITYCOL NOT IN
(SELECT TOP ?1 IDENTITYCOL
FROM table order by IDENTITYCOL))
order by IDENTITYCOL
but the below SQL in mysql,how to convert?I enmesh...........
select pageid,pagename,pageaddr,pageauditflag,pageartaudi tflag,startplaytime
from pageinfo where entryid= ?1 and startplaytime= ?2
limit ?3, ?4
thanks!
hi,I have a question.Maybe You know the equivalent to command LIMIT from MySQLI couldn`t find something like this in MS SQLPSI try to display 10 records begining form e.g. 4 sort by idsomething like: "SELECT * FROM table WHERE name=... LIMIT 4, 10 ORDER BY id"in MySQLthanx,Urban
View 2 Replies View Related