Link Two Tables Using Partial Word Match
Jan 18, 2007
Hi All,
I need to link two tables using partial word match.
How can I write a SQL statement to do so? (I am using MS-Access.)
Table One: [Table Name: tblStreet] [Field Name: Street]
123 ABC Street
124 ABC Street
125 ABC Street
1 XYZ AVE
2 XYZ AVE
3 XYZ AVE
10 CBS Street
11 CBS Street
12 CBS Street
100 Apple Road
101 Apple Road
102 Apple Road
Table Two: [Table Name: tblWord] [Field Name: Word]
ABC
CBS
The output should be:
123 ABC Street
124 ABC Street
125 ABC Street
10 CBS Street
11 CBS Street
12 CBS Street
Could this be done?
Thank you in advanced.
- Grasshopper -
View 2 Replies
ADVERTISEMENT
Jan 22, 2007
Hi Alex (Kuznetsov) and All,This is to follow up with my last post, "Link two tables using partialword match".How can I UPDATE table using partial word match?How can I write a SQL statement to do so? (I am using MS-Access.)The two tables and the expected result are listed below:Thank you in advance!- Grasshopper -================================================== =====TABLE: tblStreet_Value (Table to be undated)StreetValue2---------------------123 ABC Street124 ABC Street125 ABC Street1 XYZ AVE2 XYZ AVE3 XYZ AVE10 CBS Street11 CBS Street12 CBS Street100 Apple Road101 Apple Road102 Apple RoadTABLE: TblWord_NumberWordNumberValue---------------ABC123NYABC125CACBS11MACBS12TXResultStreet Value2---------------------123 ABC Street NY124 ABC Street125 ABC Street CA1 XYZ AVE2 XYZ AVE3 XYZ AVE10 CBS Street11 CBS Street MA12 CBS Street TX100 Apple Road101 Apple Road102 Apple Road
View 5 Replies
View Related
Jan 12, 2006
I have a customer who wants to SELECT records based on a partial match in atext field. For example, in a list of telephone numbers they want to searchfor all records that contain the digits '777' in any part of the string. Howdo I formulate such a query?Many thanks.
View 2 Replies
View Related
Feb 11, 2015
Why terms are not being corrected on a partial match? I thought this was the point of term based relation rules.
I am testing in an email address (nvarchar) field?
E.g. trying to correct @@ to @ and .con to .com (just to test)
And everything passes.
If I test with an entire value, the field is corrected.
E.g. 605688878@@qq.com corrects to 605688878@qq.com if I enter those exact values as term based relations.
View 0 Replies
View Related
Apr 6, 2007
Hi can anybody give me a simple example to check exact match word using sql sever
Ex: my word is like this : welcome to sql sever2005
Now i want to find server how it is possible?
I tried like this
select * from test where content like %server% . but is gives me possible result. But i dont want like this if i have an exact match with that key word then only i want possitive result.
Actually there is no word with server, i'm having only server2005 . So how can I get it?
Thank you
View 3 Replies
View Related
Feb 20, 2008
I have created an Access2003 project (existing data) that links to external data. First I connected to a SQL Server 2000 database. Success. Then I tried to set up a Transact SQL data connection to a legacy MDW-secured Access97 database. (A third-party VB6 application goes against it, and we don't have the source code, so we cannot upgrade it.)
The Transact SQL link tests OK but I cannot select any of the tables or queries from the list presented. However, with the same credentials, I can use these same objects in Excel 2003.
When setting up the link in Access2003, I specify JET 4.0 OLE DB Provider, I enter the MDW file on the All tab, a username and a password on the Connection tab where I browse to the MDB file, and specify Shared Deny None on the Advanced tab. When I test the connection, it tests OK ("Test connection succeeded"). Yet on the "Select the Database and Table/Cube which contains the data you want" dialog, "(Default)" appears in the grayed-out dropdown. Then, beneath that dropdown, there is a grid with Name and Description columns. The grid contains query names but the grid is not enabled. The list of queries is this table is grayed out. Neither of the scrollbars works.
BUT... if I use the SAME username and password in Excel2003, and specify the same MDW, there is no problem working with these same database objects in the legacy Access97 database. WHAT IS DIFFERENT ABOUT THE WIZARD IN EXCEL THAT ALLOWS IT TO SUCCEED AND THE WIZARD IN ACCESS THAT CAUSES IT TO FAIL HERE? In Excel, the list of available providers says Microsoft Access Driver, not JET 4.0 OLE DB Provider.
Thanks
TR
View 1 Replies
View Related
Feb 3, 2006
When trying to link to an SQL table in Access 2003, the software appears to be malfunctioning.
The sequence of events is File - Get External Data - Link Tables - Files of Type: ODBC Databases().
The Problem: On two of my computers, the select data source window does not pop up, preventing me from linking to any ODBC data source.
Observations: This function has worked normally in the recent past and works on other computers running Access 2003. One difference between the computers working and non-working computers is Norton Antivirus 2006 (recent upgrade).
Has anyone experienced anything like this? What's going on?
View 8 Replies
View Related
Dec 28, 2007
Hi, hope someone can help.
I have a table of employees and two sites. Most employees only do shifts at the one site but may occasionally work at the other site. What i want is the details of those who have worked at both sites.
for e.g.
Employees
1 Dave
2 Peter
3 John
Site 1
Mon John
Tue Peter
Wed John
Thu John
Fri Peter
Site 2
Mon Dave
Tue Dave
Wed Dave
Thu Dave
Fri Peter
So the answer should be 2 Peter. Hope this explains the problem. Probably very obvious but it has me stumped.
Thanks
View 4 Replies
View Related
Aug 29, 2007
i have two tables one with id and one with storyid which match. i need to check which record is at top of table two. and then pull top four from table one where the top story from table two (storyid) is not one of the top four in table one (id). is this possible? can anyone help?
View 8 Replies
View Related
Aug 12, 2014
I have a table of customer information (ci), but I have to link to another table in order to get the street address (sa).
If I exclude the street address I get 33 results. If I make the link to street address I will only get 30 results.
What I found is that if the ci table field for country is blank and I try linking to sa table then that result will not be shown.
Is there a way to get all 33 results while linking the two tables?
View 4 Replies
View Related
Feb 19, 2007
Hello, Everyone
I had 2 tables contain data:
1) old_data: 601,195 records
firstname
lastname
address
city
state
zip
zip4
2) current_data: 410,185 records
firstname
lastname
address
city
state
zip
zip4
3)Questions: How I write a query make to delete records? From table 'old_data' delete match records reference to table 'current_data' and keep the remain good records are from 'current_data' table.
****Here's below my test query that came up with if there are any error and please provide me any suggestion or new query. Very important task ....Thanks you to all.
/*******
Delete current_data
From old_data Cross Join current_data
Where old_data.FirstName = current_data.FirstName and old_data.LastName = current_data.LastName
and old_data.Address = current_data.Address
********/
RV
View 8 Replies
View Related
Jul 6, 2015
I have a table variable @tbl with one column (user) with example Laura, Scott, and Kevin.
Then I have a table usergroups with two columns (groupid, user) with example:
1, Laura
1, Scott
2, Laura
2, Scott
2, Kevin
3, Laura
3, Kevin
3, Scott
3, Jim
4, Laura
4, Kevin
4, Scott
I want to find groupid 2 and 4 because they exactly match the content of @tbl.
View 8 Replies
View Related
Nov 23, 2007
Hello,
I'm looking for the best solution for creating database tables based on
a Word Document with a table. I've attached part of the table from the word doc. This document is base on a template for audit reporting.
What I assume is I would need first to start of by creating two tables.
One table would consist of the fields of the horizontal upper most data e.g.
conformance, noncomformance etc. The other table would consist of the vertical fields of the word doc table, e.g. editorial, Auditee Name etc. If my assumption is correct, what primary key and foreign key would I need to have?
Any help would be much appreciated.
Thanks
Karl
View 3 Replies
View Related
Feb 12, 2015
I have two table People and Employee, both have firstname and lastname as fields
I want to display only the names that don't match on firstname and lastname
View 3 Replies
View Related
Aug 6, 2015
CREATE TABLE #NAME1(FULLNAME VARCHAR (100))
INSERT INTO #NAME1(FULLNAME) VALUES('JOHN X. DOE')
INSERT INTO #NAME1(FULLNAME) VALUES('FITZGERALD F. SCOTT')
CREATE TABLE #NAME2(LASTNAME VARCHAR(25), MI VARCHAR(2), FIRSTNAME VARCHAR(25))
INSERT INTO #NAME2(LASTNAME, MI, FIRSTNAME) VALUES('DOE', 'X', 'JOHN')
INSERT INTO #NAME2(LASTNAME, FIRSTNAME) VALUES('FITZGERALD', 'F SCOTT')
My task is to find matches between these two tables on "name."
View 1 Replies
View Related
May 4, 2015
There are two tables
TABLE 1 (NAME - Groupseats)
id session course groupcode sub1 sub2 sub3
1 2015 ba1 137 HL EL Eco
2 2015 ba1 138 EL SL HS
3 2015 ba1 139 SL EL His
From this table i use to admit a student and select their choice of group simultaneously all the subjects associated with GROUP is save on another table.
Here is the TABLE 2 Structure and sample data:
table 2 (NAME - tblstudetail)
id studentID session course sub1 sub2 sub3
1 15120001 2015 ba1 EL SL HS
2 15120002 2015 ba1 HL EL Eco
3 15120003 2015 ba1 SL EL His
4 15120004 2015 ba1 HL EL Eco
AND so no..........................
Now i just want to COUNT the Number of Groups Filled in tblStudateil.
View 10 Replies
View Related
Apr 20, 2008
Hi Everyone, I have a webform. I need to save the data inside the form into 2 tables. For that i have 2 separate buttons inside the form. tbl_jobPost(JobId,JobName,StartDate,EndDate,phone,email,jobFile_id) tbl_jobFile(FileId,Filename) 1st i ll be inserting the data into the tbl_jobFile:-(FileId,Filename) like this:- (1,abc) (2,xyz) (3, fsd)Then i will be inserting the data into the next table:-tbl_jobPost(JobId,JobName,StartDate,EndDate,phone,email,jobFile_id) like this:- (1,job1,2008,2009,4534535435,zzz@eee.com,jobFile_id)My question:-How should i pass all the jobFile_id from tbl_jobFile into tbl_jobPost row no. 1?Can you suggest any good solution for this?I m new to Foreign key.Do i need to use here.?Thanks.jack.
View 14 Replies
View Related
Oct 18, 2006
Hello all, I have a quick question. Is it possible to create linked tables in MS SQL, similar to the was MS Access does?
I have a new application(x) that is going to be dependant on another application(y). I just want to link 5 or 6 tables from y into x for the purpose of not duplicating information. Is this possible?
I apologize if I seem a little lacking in the knowledge of MS SQL, I am new to it and trying to figure it out. Any help would be greatly appreciated.
Thanks,
Dan
View 5 Replies
View Related
Jun 26, 2006
Hi all,
I would like to simply link two tables that are in two different databases in the SAME server.
I know that I could use the replication method (snapshot or merge) but I need a simpler method like the Access link table method.
Any suggestions?
Thanks
Alessandro
View 8 Replies
View Related
Apr 2, 2008
Hi,How can I run a query to figure out what tables and correspondingcolumns link to any column in my table T?Thanks, - Dave
View 1 Replies
View Related
Aug 15, 2015
I have data model as below....I have created a unique constraint as below;
CREATE UNIQUE NONCLUSTERED INDEX [UNQ_StaffIDEventID] ON [dbo].[tblStaffBookings]
(
[StaffID] ASC,
[EventID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)
I now tried to create a link between two tables tblStaffBookings and tblEventStaffDisciplinary by dragging from tblEventStaffDisciplinary.StaffID to tblStaff Bookings.StaffID and it gives me error as below;What do I need to do to link tblEventStaffDisciplinary.StaffID to tblStaffBookings.StaffID?
View 15 Replies
View Related
Jan 13, 2000
I have linked some SQL7 tables to MSAccess, then I created more tables in the SQL7 database. Trying to link them in MSAccess97 but only the old SQL7 tables show up in the list of choices that can be linked. How to get the newly created tables to show up on the list?
View 1 Replies
View Related
Mar 18, 2004
Hello All,
I am new to this forum and hope that some one can help me with this problem.
I know that in MS Access you can have a linked table in your databse such that as long a the like is not broken, it behaves similar to any other table in the database.
My problem is that I need to do the same thing for multiple databases that I have on a MS SQL Server that ALL currently have copies of the same table in common.
I wish to have a single table that they all share and have access to just link any other table that they currently have but is actually linked.
Can this be done?
And if so, then could someone please guide me in this?
My logic is that if MS Access can link tables then I could suspect that MS SQL Server should be able to also, but I could be wrong.
Thanks in advance,
Lonnie
View 5 Replies
View Related
Apr 24, 2001
Anyone has any idea why I havethis problem?
I have a SQL 2K database on a named instance with tables populated with data and they have no relations between them.
I have a MS Access 2000 database.
I have a system ODBC connection on the client computer to the SQL 2K using trusted connection.
I linked the tables into MS Access 2000 to SQL 2K and I can read the data without any problem.
When I try to update the data on the table, I get the message : The recordset is not updatable.
I am the DBO. So I am supposed to have all rights. All the select, update, insert and DRI rights are enabled.
I tried it with another user and it does not work either.
Anyone has an idea?
Thanks
View 2 Replies
View Related
Jan 24, 2007
Amir writes "Dear Team Members;
Im writing a program in ASP language which it is using SQL Server for database.
I want to know how to create a link between fields of two tables. For example:
I have a table named: Projects containing:
p_name
status
date
member1
member2
and another table named results containing:
p_name
s_status
status1
status2
I want to create a link between field s_status of STATUS table and field status of table Projects
Users are sending data to table projects, when a user send some data to status of projects, I want this link to send data from status in project to s_status of results.
Could you please help me how to do it?
Regards.
Amir Zandi"
View 1 Replies
View Related
Sep 2, 2007
I realize this a Transact SQL forum. If there is another forum more appropriate, please let me know.
I want to think about the best way to begin to set up this database with respect to the column that will link these tables together.
The info below is what has been given to me as my client's list of values/info she would like to include.
Here is my first pass, knowing that the ID columns need to be fixed. Thank you!
http://www.hazzsoftwaresolutions.net/db_diag.htm
Patients
ID
First Name
Last Name
DOB
1234-12
Joe
Smith
3/1/1960
5432-30
Bob
Jones
1/3/1991
3232-22
Paul
White
5/12/1982
PatientVisits
AutoID
PatientID
VisitDate
WeightPounds
HeightInches
1
1234-12
10/11/2001
180
68.5
2
1234-12
2/1/2003
185
68.7
3
5432-30
4/5/2000
155
63.0
4
5432-30
11/6/2000
165
63.0
5
5432-30
5/12/2001
164
63.5
6
3232-22
1/17/2002
220
75.0
View 3 Replies
View Related
Jul 22, 2015
The database has approx. 2500 temporary tables. The temp tables match a pattern such as APTMP... I tried deleting the tables in SSMS with the statement, Delete from Information_Schema.tables where substring(table_name,1,5) = 'APTMP' This returns the error message"Ad hoc updates to system catalogs are not allowed".
What is the correct way to delete a group of tables whose name match a pattern from within SSMS?
View 9 Replies
View Related
Mar 7, 2000
Hi All
My manager told me to link SQL Server database tables to access so that he can access the tables in MSAccess to do his SQL queries.
I am thinking of linking server but I am not sure about that.
Is someone can tell me what to do and explain me how.
Thanks in advance
Sincerely.
David
View 2 Replies
View Related
Jan 30, 2008
Hi All, I have recently moved jobs. From my last job I created a holiday database for the organisation, than I copied it on a storage device. Now, in my new job I would like to use same database. But the problem is most of the tables were linked. I know I can convert linked tables to local tables and I have tried it but it asks me for the new location with the same table names. Can some one please helpppppppppppppppppppppppppppppppppp I as I am really very desperate.
Thanks in advance.
View 1 Replies
View Related
Feb 27, 2007
I am trying to do the following:
Insert n rows into A Table called EAItems. For each row that is inserted into EAItems I need to take that ItemID(PK) and insert a row into EAPackageItems.
I'm inserting rows from a Table called EATemplateItems.
So far I have something like this: (I have the PackageID already at the start of the query).
INSERT INTO EAItems(Description, Recommendation, HeadingID)SELECT Description, Recommendation, HeadingIDFROM EATemplateItems WHERE EATemplateItems.TemplateID = @TemplateID INSERT INTO EAPackageItems(ItemID, PackageID) ....
I have no idea how to grab each ITemID as it's created, and then put it into the EAPackageItems right away.
Any Advice / help would rock! Thanks
View 3 Replies
View Related
Nov 29, 2006
menardo writes "Hi there!
I'm a very newbie in SQL programming. Can anybody help me how do I start to learn scriptings.
Can you give me the process or scripts on how to export it??
Thanks in advance.
-menardo"
View 2 Replies
View Related
Sep 13, 2007
Hi,
I want to design a report in which it will contain fields derived from 2 different stored procedures. I understand a 'table' can display data from a single dataset. How can i bind these two stored procedures into a single dataset so as when i click on the table and use its property 'DataSetName', to be able to select the dataset which holds all columns from stored proc 1 and stored proc 2. How can i link multible tables ( multible stored procedures with different column names in each one) into a single dataset to feed the report?
Thank you
George
View 1 Replies
View Related
Aug 13, 2015
I'm pulling data from XML into tables, but I'm unsure how to link the data after it's imported. This example has names and tasks, and I can pull the data into two tables, but I can't find any way to link the task to the appropriate person. My person and task tables populate without issue, but there's nothing I can find to link the rows together. So in this example Test 1 would go to the first two Tasks and Test 2 would go to the second two work items.
DECLARE @XML TABLE (XMLData XML);
DECLARE @Person Table (Name NVARCHAR(50), Addresss NVARCHAR(50));
DECLARE @Task Table (Name NVARCHAR(50), Details NVARCHAR(50));
INSERT INTO @XML SELECT '
<process>
<header>
<Person><Name>Test1</Name><Address>123 main street</Address></Person>
[Code] .....
View 9 Replies
View Related