Linked Server From SQL Server 2005 (x64) To Sybase
May 24, 2006
Hi,
We have been accessing databases on ASE 12.5 (on HPUX) from MS SQL Server 2000 (x32) successfully for years. We do this via linked servers we create on MS SQL Server. When creating the linked server, we would specify the Microsoft OLE Provider for ODBC as the provider, and the data source is the name of a DSN created with the Sybase ASE ODBC driver (4.20.00.67) that points the the HPUX box on which are the Sybase databases.
We have also gotten this to work just fine on MS SQL Server 2005 (x32) Standard Edition SP1. However, we cannot seem to get this to work on MS SQL Server 2005 (x64) Enterprise Edition SP1. The Microsoft OLE DB Provider is not available as an option when creating the linked server on MS SQL Server 2005 (x64). We have tried specifying the SQL Native Client as the provider, but this results in no connection being made and reports the following error:
OLE DB provider "SQLNCLI" for linked server "GCMTESTSQLNATIVE" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "GCMTESTSQLNATIVE" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
Msg 53, Level 16, State 1, Line 0
Named Pipes Provider: Could not open a connection to SQL Server [53].
Do we need to use a different ASE driver when accessing Sybase databases fom the MS SQL Server (x64) platform? Or is there a way to successfully create a linked server on MS SQL Server 2005 (x64) that can communicate with the 32-bit ASE ODBC driver?
Thanks,
Rocco M.
View 7 Replies
ADVERTISEMENT
Dec 28, 2005
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?
View 10 Replies
View Related
Sep 27, 2007
I have a linked server from Sql Server 2000 to Sybase Adaptive Server 12.5.1.
When i try to call a stored procedure on Sybase from Sqlserver i get the following message:
"could not execute procedure sp_who on remote server 'linked server name'(42000,7212)
command executed from sql server:
exec <linked_server>.<database>..sp_who
i am able to user open openquery for selects and inserts, successfully
Help appreciated
Thanks.
View 4 Replies
View Related
Jul 5, 2001
We have created linked servers that connect to Sybase databases using the Sybase OLE DB provider and the Sybase ODBC provider.
The OLE DB provider does not allow the execution of a stored procedure. The message sounds like a permissions issue, but the id specified in the linked server has execute priv. for the stored procedure. It also does not allow the fully qualified name <server>.<db>.<owner>.<obj> to be used.
There are other issues with OLD DB and ODBC.
Anyone have any experiences making MS SQL to Sybase work smoothly?
View 3 Replies
View Related
Jun 1, 2015
Cannot create an instance of OLE DB provider "ASEOLEDB" for linked server "[SERVER_NAME]"
The current setup: Our primary database is on Sybase, I needed to extract hierarchical (nested) XML from multiple tables on Sybase. Although Sybase ASE 15.5 has `FOR XML` query capability it does now allow nested XML format. So we used the 'FOR XML', XML functionality in SQL Server (as we had a SQL Server 2008 database available which is used for a smaller system) to query Sybase tables through a Linked Server connection.Our sample nested XML Format is similar to:
<personCol>
<person>
<id>1111</id>
<name>John</name>
<age>21</age>
<sex>M</sex>
[code]....
View 2 Replies
View Related
Nov 10, 2006
I would like to create a linked server from SQL Server to Sybase IQ. I have created linked servers before so I know how to do that. However, I dont know the specifics of creating a linked server to Sybase IQ.
What are the parameters that are necessary to link IQ to SQL Server. Which Provider do I use? Do I need to install a special driver?
View 2 Replies
View Related
Mar 11, 2004
Has anyone had problems using an OLEDB linked server connection to Sybase ASE 12.5? I'm having major performance problems when I use string criteria in the where clause. Queries that return 1 row and execute in less than a second using a native Sybase connection take 40 seconds to run using the linked server OLEDB connection. If I use ints in the where clause performance is almost exactly the same between native and linked connections.
Any ideas???
View 9 Replies
View Related
Jun 2, 2005
Attempting to create a Linked Server to a Sybase 11 db. Did the following
View 4 Replies
View Related
Apr 2, 2008
Hi all,
Iīm trying to create a linked server to a Sybase database (.db file) so i can create some reports in sql 2005 (with Reporting Services and Report Designer). After reading all articles I did the following.
1) Installe Adaptive Server Anyhwere (Interactive Sql) 9.0.2 on the server.
2) Created a USER DSN to the Db file (Control Panel - odbc connections) and it works fine: The Settings for the ODBC are:
ODBC Tab
Data Source Name: dbNOM
Login Tab
Supply userID and Password: (selected)
User ID: DBA
Password: SQL
Database Tab
Server Name: dbNOM
StartLine: C:Program FilesSybaseSQL Anywhere 9win32dbeng9.exe
Database Name: (blank)
Database File: c:Project FolderDataBase.db
As I said, when i go for "test connection", works fine.
3) Sql Management Studio - Object Explorer - Server Objects - New Linked Server, with settings as following:
General
Linked Server: lkDbNom
Server Type: Other Data Source
Provider: Sybase Adaptive Server Anywhere Provider 9.0
Product Name: Sybase
Product Name: dbNom (the dsn name, right?)
Security
Be made using this security context.- Remote Login: DBA; Password: SQL (same as DSN)
All other settings, as default, click in OK and shows no errors (aparently it creates the linked server successfully). But when i try to query the linked server with:
SELECT * FROM OPENQUERY ('SYBASE', 'SELECT * FROM nom_Robot')
And i get the following message:
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near 'SYBASE'.
Even better, if i go to the Object Explorer - Server Objects, i test the connection and itīs ok, but when i try to retrieve the catalog an error displays:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The OLE DB provider "ASAProv.90" for linked server "SYBASE" reported an error. Access denied.
Cannot obtain the required interface ("IID_IDBSchemaRowset") from OLE DB provider "ASAProv.90" for linked server "SYBASE". (Microsoft SQL Server, Error: 7399)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3054&EvtSrc=MSSQLServer&EvtID=7399&LinkId=20476
So, i really donīt understand what is missing in my linked server, i tried with MDASQL (OLEDB for ODBC) but it doesnīt even completes to create the linked server.
The database file is ok because, because in another server (one that doesnīt have SQL, only visual studio) i did the following:
1) Installe Adaptive Server Anyhwere (Interactive Sql) 9.0.2 on the server.
2) Created a DSN to the Db file, and it works fine. (copied the db file, so is local, no remote access), exactly the same setting as i did on the sql 2005 server.
3) Created a connection in visual studio 2008 (server explorer - data connections), i can retrieve sdata...but of course the provider is .NET Framework Data Provider for ODBC and i cannot use the same connection string.
Any ideas?
P.S.
View 7 Replies
View Related
Jun 26, 2000
I am having trouble linking to a Sybase server using the ODBC OLEDB provider, with either the sp_addlinkedserver stored proc, or the "linked servers" wizard in Enterprise manager.
The SQL I am executing is:
/* add server */
exec sp_addlinkedserver
@Server = 'Linked Server Name',
@srvproduct = 'Sybase System 11',
@Provider = 'MSDASQL',
@provstr = 'Driver={INTERSOLV 3.11 32-BIT Sybase};SRVR=servername;DB=targetdatabase;UID=bob; PWD=bob;'
/* create security mapping */
exec sp_addlinkedsrvlogin
@rmtsrvname = 'Linked Server Name',
@useself = 'false',
@rmtuser = 'bob',
@rmtpassword = 'bob'
(Note that this does not use a DSN - I have tried it both ways, but with no joy).
The SQL executes without any errors or warnings. However, when I try to use the linked server connection (eg., visually list the tables available by double clicking the linked server in the Enterprise Manager, or Select * From a table in the Query Analyser) it give the following error:
"Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error. The provider did not give any information about the error."
(That is - generic error)
It just seems that I am not putting the connect string components in the right places.
Does anyone have any suggestions on how to set up a linked server to Sybase in this this way?
Many TIA
View 1 Replies
View Related
May 4, 2008
help...
i successfully linked the sybase database to sqlserver. at first i can select a record, after i execute the same statement the result become different. i was looking for answer in the web but i can't find one. can somebody help me...
i suspect that sqlserver cache the result.. so i try to create a view for sybase database table. when i select the view it gave me the complete result but when i rerun the statement again it became inconsistent.
is there a cache or something in sqlserver. if there is how can i clear it.. so i will always get the fresh copy of the result.
View 6 Replies
View Related
Jul 27, 2005
When trying to update records in a Sybase 11 ODBC linked server got this error:
View 5 Replies
View Related
Apr 26, 2004
:confused:
How do I tap advanced functionality like #temptable and @var from openquery? There is a linked server from SQL Server 2000 to Sybase 12 using Sybase.ASEOLEDBProvider.
Executing an openquery statement from MS SQL will retrieve Sybase data; however, I have no advanced functionality available. When I try to use temporary #tables or declare @vars it returns this error...
Server: Msg 7357, Level 16, State 2, Line 1, Could not process object '…OLE DB error trace [Non-interface error: OLE DB provider unable to process object, since the object has no columnsProviderName='Sybase.ASEOLEDBProvider', Query=…
Linked Server configuration:
Provider options: AllowInProcess is checked
Server options: Collation Compatible, Data Access, RPC and RPC Out are checked
Does anyone have a suggestion or alternative for this functionality? Thank you very much for your input.
View 6 Replies
View Related
Nov 30, 2007
I am getting error when I try Inserting data in sybase 12.5 using linked server from SQL2K5
I am able to select
Following is the code i am using.error is same for both stmts
insert into l_syb_ibt.ibtqa.dbo.rajtest (id)values (1)
insert openquery(l_syb_ibt, 'select id from rajtest where 1=0') values (1000)
please help.thanks in advance
following is the error
OLE DB provider "MSDASQL" for linked server "l_syb_ibt" returned message "Transaction cannot have multiple recordsets with this cursor type. Change the cursor type, commit the transaction, or close one of the recordsets.".
Msg 7343, Level 16, State 2, Line 1
The OLE DB provider "MSDASQL" for linked server "l_syb_ibt" could not INSERT INTO table "[l_syb_ibt].[ibtqa].[dbo].[rajtest]".
View 5 Replies
View Related
Jan 3, 2008
Hi all,
I am Migrating a database from sybase to sql server 2000. I Have already created objects in sql server 2000. I have to only populate it with the data. I have decided to genrate insert script from the aquadata tool and run the script againgt sql server database. It works fine except for few table which have 1,50,000 and 9,00,000 rows. It shows insufficent memory error when i try to run the script with 1,50,000 and the script with 9,00,000 doesn't open in management studio. Please help.
Bharath JrDBA
View 9 Replies
View Related
Apr 7, 2006
Hi all,
Here i had a task to migrate sybase 8.0 database to mssqlserver 2005 .how can i migrate this using INTEGRATED SERVICES (SSIS) or any other options. .Please try to provide some basical info because i am new to sybase versions.
View 3 Replies
View Related
May 18, 2008
hi,
i tried the document below pertaining to linking sybase 12.5 to sqlserver 2000 and sqlserver 2005
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=311875&SiteID=17
http://www.sybase.com/content/1029118/1029118.doc
but when our company upgrade the sybase to 15.x i can't find the oledb configuration stated on the document.
so i can't linked the sybase 15.x now to sqlserver 2005. can somebody help me.!!!please...
where i can find the oledb configuration in sybase 15.xx..
tnx..
View 1 Replies
View Related
May 4, 2007
Hi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
View 3 Replies
View Related
Apr 18, 2007
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
View 1 Replies
View Related
Aug 30, 2006
I'm trying to link SQL Server 2000 sp3 to SQL 2005 64 bit. I keep getting Error 17 sql server does not exist or access denined. I tried adding remote user mapping and chaning the linked server properties to "Be made using this security context" without any success.
Any help is appreciated.
View 4 Replies
View Related
Aug 27, 2007
I receive the following error message when I run a distributed query against a loopback linked server in SQL Server 2005:
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
To resolve this problem, I was told that running a distributed query against a loopback linked server is not supported in SQL Server 2005. And I am suggested to use a remote server definition (sp_addserver) instead of a linked server definition to resolve this problem. (Although this is only a temporary resolution, which will deprecate in Katmai)
However, I run into another problem when I use the remote server definition. I receive the following error message:
Msg 18483, Level 14, State 1, Line 1
Could not connect to server 'ServerNameSQL2005' because '' is not defined as a remote login at the server. Verify that you have specified the correct login name.
Could anyone please help me out?
(I include the reproduce steps for the first error message, followed by my resolution that generates the second error message)
======
Reproduce steps for the first error message
======
On the ComputerAInstanceA instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseA
GO
USE DatabaseA
GO
CREATE TABLE TestTable(Col1 int, Col2 varchar(50))
GO
INSERT INTO TestTable VALUES (1, 'Hello World')
GO
On the ComputerBInstanceB instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseB
GO
USE DatabaseB
GO
CREATE TABLE TestTable (Col1 int, Col2 varchar(50))
GO
On the ComputerAInstanceA instance, create a linked server that links to the ComputerBInstanceB instance. Assume the name of the linked server is LNK_ServerB.
On the ComputerBInstanceB instance, create a linked server that links to the ComputerAInstanceA instance. Assume the name of the linked server is LNK_ServerA.
On the ComputerBInstanceB instance, run the following statement:
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * from LNK_ServerA.DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXEC LNK_ServerB.DatabaseB.dbo.InsertA
GO
Then I receive the first error message.
=======
My resolution that generates the second error message
=======
On the ComputerBInstanceB instance, run the following statement:
sp_addserver 'ComputerAInstanceA'
GO
sp_serveroption 'ComputerAInstanceA', 'Data Access', 'TRUE'
GO
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * FROM [ComputerAInstanceA].DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXECUTE [ComputerBInstanceB].[DatabaseB].[dbo].[InsertA]
GO
Then I receive the second error message.
View 1 Replies
View Related
Oct 4, 2007
I have an Excel sheet that is dynamically updated (through DDE) and I want to import this data to a table in SQL Server 2005. Using SQL Server Management Studio to configure an Excel data source as a linked server.
(http://support.microsoft.com/kb/306397/EN-US/)
Following the first 5 steps should let me acces the table (but I cannot view the data in SQL Server 2005). However, I could not find how to export the data into an existing table. Does anyone know how or can give a pointer to document describing how to do this?
View 8 Replies
View Related
Jul 30, 2007
Hi,
I am using Windows 2003 server and Sqlserver 2005 by the use of Linked server , I made a connection to Oracle 10g after that I am importing records from Oracle to sqlserver 2005. When I made tnsnames.ora in sql machine , it worked fine but when i am using tnsnames file from oracle server then i fiired importing procedure it returns below maintain error :
OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS" returned message "Unspecified error".
OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS" returned message "Oracle error occurred, but error message could not be retrieved from Oracle.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES" for OLE DB provider "MSDAORA" for linked server "BI_ORACLE_LS". The provider supports the interface, but returns a failure code when it is used.
Please let me know.
Thanks
View 15 Replies
View Related
Jan 16, 2008
Hello
SQL 2000: 8.00.2187 x86, 8 way 700mhz, 6GB Ram
SQL 2005: 9.00.3042 IA64 2 Way Dual-Core 1.66Mhz 16 GB ram
Symptoms
Querys to the SQL 2005 box from SQL 2000 work but when the query is parameterised with non-literals (@variables) then the query run on the SQL 2005 box excludes any where clause causing the entire table to be returned to the SQL 200 box. When the query is parameterised using literal values the query is executed on SQL 2005 including the where clause.
At first I thought that the "Collation Compatible" setting was the culprit but setting this to 1 made no difference. Other SQL 2000 boxes work as expected and any queries from these using literal and non-literal parameters.
Please, any ideas?
Working
SELECT A.Column FROM linkedServer.IA.dbo.Table Where A.Column = 'value'
Not Working (correctly anyway!)
DECALRE @Value tinyint
SET @Value = 22
SELECT A.Column FROM linkedServer.IA.dbo.Table Where A.Column = @value
View 5 Replies
View Related
May 27, 2008
Hello,
I have a development and a production SQL server instance environment set up on 2 independent machines. Each machine is running Windows 2003 for an OS, while each server instance is version SQL Server 2005. On friday, I experienced difficulties querying one environment from the other through linked servers. I would get the error below:
.
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "dev_server". The provider supports the interface, but returns a failure code when it is used
The linked servers had been previously set up and had been running without any issues. Dropping and recreating the linked servers did not help at all, and all attempts to google the error led to accounts of either SQL Server 2005-SQL Server 2000 procedures compatibility or 64 bit - 32 bit compatibily related errors. Neither of the two were relevant as both my environment have the same technology, both hardware and software.
Mysteriously, the linked server worked this morning without any issue at all. One co-worker suggests gremlins are at work, while another figures that my set up had 'checked out for the long weekend'. Unfortunately, neither explanation is plausible, so my quest to find out what could have gone wrong, and hopefully put preventitive measures in place for the future goes on. Does anybody have any idea what the issue could have been?
Thanks,
Simba
View 1 Replies
View Related
Feb 19, 2008
Actually i have linked server in SQL 2000 with Provider:Microsoft OLEDB for ODBC which is working perfectly fine. I don't know the password for this linked server too.
Now i want to create same linked server with same provider in SQL server 2005 for Microsoft oledb for ODBC but they don't have this provider in 2005. How can i make it to work.ANy expert who knows this.
and how to use same password in linkedserver in 2005
View 12 Replies
View Related
Jun 7, 2007
Dear Friends,
I am getting error when trying to make excel file as the linked server in my sql server the details are as under:
os: windows xp and also tried on windows server 2003
server: sql server 2005 sp2
excel: office 2003 and also tried with .xls file of office 2007
tried to add the remote as well as file on the same computer as linked server, but error was:
could not find installable ISAM and error no was 7303.
Please help me up.
I got the idea to make it as linked server from microsoft article and followed the neat steps and got the errors.
Thanks,
View 1 Replies
View Related
Jan 14, 2008
Hi,
I created a linked server from SQL server 2005 (cluster) to SQL server 2000. When i try to execute the query from local server i get this error
OLE DB provider "SQLNCLI" for linked server "Rem_serv" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'rem_User'.
Please help
Thanks and regards
Helen
View 3 Replies
View Related
May 24, 2006
I am trying to create a linked server in SQL Server 2005 to show tables in our AS400. I made the connection, however, the tables are not showing up under the Linked Server name.
How do you get the linked tables to display in the Linked Server folder?
David
View 4 Replies
View Related
Dec 18, 2006
Hi,
I am using SQL Express 2005 sp1
When I created a linked Server to the DB2 on iseries ( V4R5) , the SELECT statement fetches me only the first record and the following message appears.
OLE DB provider "MSDASQL" for linked server "DB2TEST" returned message "[IBM][Client Access Express ODBC Driver (32-bit)]Driver not capable.".
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "MSDASQL" for linked server "DB2TEST".
I am using 'MSDASQL' which refers to the DSN setup on my machine using the ODBC "Client Access Driver 32-bit"
Strangely when I used the same DSN in SQL 2000 within the DTS package, I was able to connect and import data and worked like a charm.
Can anyone advice me where I am going wrong.
Thanks in advance
View 1 Replies
View Related
Jan 25, 2008
I have two linked servers configured on my server(SQLServer 2000, Win2003). Both are configured to use Sybase ASE OLE DB driver, version 12.5. I have two differen OLE DB Obects configured in Sybase Configuration Manager. One object is configured to point to a Sybase 12.5 server in Boston, the other is configured for a server(same version) in Westboro. I can test connect from the SQLServer machine on each of these, and see that I am connected to each of the Sybase servers. However, my linked servers are only able to connect to the first OLE DB data source listed in the Sybase Configuration Manager. The linked servers are configured to use different OLE DB data sources, and no errors are thrown, but I can see that both actually go to the same data source. If I rename/re-order the OLE DB Data Sources, and make the second one the first one, I can connect to the other server.
Is this a known issue?
We are currently switching over to Sybase ODBC driver(not sure why we used the OLE DB driver in the first place), via which we can connect to both Sybase servers.
View 5 Replies
View Related
Jul 20, 2005
We have a need to retrieve Sybase data within a MS SQL Serverapplication. We are using SQL Server's linked database feature withthe Sybase 12.0 OLE DB driver. It takes 5 minutes to run a query thattakes 2 seconds from isql.Any suggestions?Thanks
View 1 Replies
View Related
Dec 28, 2007
My problem is happening while adding a AS 400 Linked Server. I use
EXEC sp_addlinkedserver @server='TEST1',
@srvproduct='IBM AS400 OLE DB Provider',
@datasrc ='10.36.0.101',
@provider='IBMDA400',
@provstr='Initial Catalog=QGPL;CCSID=37;PCCodePage=1252'
But, it is not effective with IBM AS400 OLE Provider, It gets always time-out score.
Can Anyone Help Me
View 6 Replies
View Related
