Linked Server On A Cluster Error
May 7, 2015
We are currently having the following problem. When trying to connect using "Be made using the login's current security context" I am getting the following error message "Login Failed for NTAuthorityAnonLogin". Yesterday this worked. The setup is as follows
SQL2008R2, nine instances on a cluster. The instance can use "current security context" when both instances are on the same node ie instance 1 node a to instance 2 node a , but when one is on node a and the other is on node b, i.e., instance 1 node 1 to instance 2 node b, we get the error above.
View 4 Replies
ADVERTISEMENT
May 6, 2008
We currently run a mixture of SQL 2000 and SQL 2005 systems, all of which run under the same domain user account. We are trying to reconfigure these systems so that each server has a dedicated service account in the domain.
I'm trying to get my clustered SQL 2005 server to talk to a SQL 2000 server using a Linked Server connection. This works fine for all of our existing systems (shared account). The service account used by all the sql servers has an SPN setup for each linked server. It is not working when I try to connect to my new server that uses a different service account. Here are some details:
SQL Cluster: Windows name PRDJOB01 (nodes named JOB01A and JOB01B). The SQL name is SQLJOB01 - WIndows 2003/SQL 2005 latest service packs for both
Linked server: DEV04INSTANCE1 - Windows 2003/SQL 2000, latest service packs for both.
SQLJOB01 runs under the account SQLService. It has an SPN for MSSQLSvc/DEV04.MYDOMAIN.COM:1234 where 1234 is the TCP port for the instance INSTANCE1.
DEV04 runs under the domain account SQLDEV04
I have tried configuring both DEV04 and SQLDEV04 to be allowed to delegate any service
Every time I try to connect to my linked server it fails with a "login failed for user '(null)'". If I create a linked server on a SQL 2000 system (also running under the SQLService account) to DEV04INSTANCE1, it works fine.
Do I need to setup an SPN for each node of the cluster to register the SQL instance name (SQLJOB01)? The Technet document that discusses setting up a virtual server (http://support.microsoft.com/kb/319723) has not been helpful for a cluster, despite being referenced in the BOL article on setting up linked servers for clusters.
Thanks
View 2 Replies
View Related
Apr 24, 2015
Need to set up a linked server in two node SQL Cluster pointing to a standalone SQL thru security setting "be made using current login's security context". It's double hop Kerberos setup. Cluster uses a domain account, so we manually set SPNs for that account with both instance name and protocol as well (set up these SPNs with SQL virtual name only).
Also, constrained delegation has been set to that stand alone SQL services (MSSQLSvc).
Both SQL cluster and standalone servers are in same domain, cluster service account is domain account and standalone SQL uses default SQL local service account.
Coming to SQL, when I create linked server, sometimes it lets me create without issues and sometime it throws this below warning and even if I create it won't work.
Login failed for user 'NT AUTHORITY/ANANOMOUS LOGIN'.
View 6 Replies
View Related
Jan 14, 2008
Hi,
I created a linked server from SQL server 2005 (cluster) to SQL server 2000. When i try to execute the query from local server i get this error
OLE DB provider "SQLNCLI" for linked server "Rem_serv" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'rem_User'.
Please help
Thanks and regards
Helen
View 3 Replies
View Related
May 5, 2008
Hi Guys:
Our company wanted to try out SQL Server 2005 Enterprise Edition (64 Bit). So, we were on free trial of the Enterprise Edition for past 5 months. After which we decided to go for SQL SERVER 2005 Standard Edition (64 Bit). And, Last week, we installed the SQL Server Standard Edition (64 Bit) on our server. After installation, everything was restored as before.
The version we are on right now is:
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Strangely, a job which ran fine till then is failing with the following error: And, to be more specific, when this job is run manually in the form of a stored procedure using the query optimizer it runs fine. But, when its executed as a scheduled job on SQL Agent, it fails. The History logs record the following error.
Error :
The OLE DB provider "SQLNCLI" for linked server "LV-SQL2" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "LV-SQL2". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI" for linked server "LV-SQL2" returned message "Invalid authorization specification". [SQLSTATE 01000] (Error 7412).
I tried everything possible, even recreated the job, but, no avail.
I also considered the possibility if SQL Agent login account did not have enough permissions. So, I changed the SQL Agent login to windows authentication, but the job still fails. So, its the problem has nothing to do with login accounts either.
For the record, I have cross checked all these too.
1. Enabled the remote connections in Surface Area Config
2. Added local server login to remote server login mappings.
3. Checked 'Rpc' and 'Rpc Out' under server options. Also, the Connection Timeout and Query Timeout have been set to zero (0).
Any suggestions pointing towards problem solution appreciated.
Thank you.
View 4 Replies
View Related
Dec 10, 2007
I am following the 2005 BOL article "How to: Remove a SQL Server 2005 Failover Clustered Instance (Setup)". The process is very simple, but perhaps the documentation is missing some steps. I am receiving the following errors during the uninstall.
The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
If I click OK I receive the error below.
Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.)
Am I supposed to do something to the cluster prior to performing the uninstall?
Thanks, Dave
View 3 Replies
View Related
Dec 10, 2007
I am following the 2005 BOL article "How to: Remove a SQL Server 2005 Failover Clustered Instance (Setup)". The process is very simple, but perhaps the documentation is missing some steps. I am receiving the following errors during the uninstall.
The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
If I click OK I receive the error below.
Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.)
Am I supposed to do something to the cluster prior to performing the uninstall?
Thanks, Dave
View 3 Replies
View Related
Oct 15, 2007
I am installing SQL 2005 on a 2-node cluster running on Windows 2003 R2. When I try to install SQL 2005 on my cluster, I get an installation error. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/9/12 16:6:42
Complete: LoadResourcesAction at: 2007/9/12 16:6:42, returned true
Running: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42, returned true
Running: ValidateWinNTAction at: 2007/9/12 16:6:42
Complete: ValidateWinNTAction at: 2007/9/12 16:6:42, returned true
Running: ValidateMinOSAction at: 2007/9/12 16:6:42
Complete: ValidateMinOSAction at: 2007/9/12 16:6:42, returned true
Running: PerformSCCAction at: 2007/9/12 16:6:42
Complete: PerformSCCAction at: 2007/9/12 16:6:42, returned true
Running: ActivateLoggingAction at: 2007/9/12 16:6:42
Complete: ActivateLoggingAction at: 2007/9/12 16:6:42, returned true
Running: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42
Complete: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__3608" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2007/9/12 16:6:42
Complete: PerformDotNetCheck2 at: 2007/9/12 16:6:42, returned true
Running: InvokeSqlSetupDllAction at: 2007/9/12 16:6:42
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [OAKLRRDSDBA]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = OAKLRRDSDBA, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = XMLDomDocument, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = Processor, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = PhysicalMemory, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = OSVersion, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = OSServicePack, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = OSType, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = iisDep, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = AdminShare, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = PendingReboot, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = PerfMon, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = IEVersion, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = COMPlus, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = OAKLRRDSDBA, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: OAKLRRDSDBA
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
1
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache
Source File Name: datastoreclusterinfocollector.cpp
Compiler Timestamp: Fri Sep 16 13:20:12 2005
Function Name: ClusterInfoCollector::collectClusterVSInfo
Source Line Number: 883
----------------------------------------------------------
Failed to detect VS info due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallIds" {"MachineConfiguration", "", "OAKLRRDSDBB"} in cache
Source File Name: datastoresqldiscoverycollector.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SqlDiscoveryCollector::collectProperty
Source Line Number: 132
----------------------------------------------------------
Failed to open discovery on machine: OAKLRRDSDBB
WinException : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastoresqldiscoverycollector.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SqlDiscoveryCollector::collectProperty
Source Line Number: 132
Any help will be appreciated.
Thanks.
hafenya
View 1 Replies
View Related
Mar 2, 2007
1. Replication Transactional between two servers
-- SQL Server 2005 as Distributors and Subscribers
---SQL Server 2000 as Publishers
2. Linked Servers errors:
" Server (Publication Server) is not configured for DATA ACCESS. (Microsoft SQL Server, Error: 7411)"
Did anyone familiar with this problem?
Thankssss
TJ_1
View 4 Replies
View Related
Aug 10, 2015
I have been facing following Error in Failover cluster setup as below. I have prepared 2 node and 2 instance sql server failover cluster on top of windows failover.I have deleted MTCBJINS07 in AD and recreated even after, problem is not solved. MTCBJINS07 is my 2nd sql instance sql server network name.
Cluster network name resource 'SQL Network Name (MTCBJINS07)' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
View 2 Replies
View Related
Apr 24, 2007
Hi,
When I tried to SQL Server 2005 (Standard) to two-node Windows 2003 servers, the Remote Setup task on the 2nd node hang. Here is the SQL Setup log. Please help figure out the cause of the problem. Thanks in advance.
Microsoft SQL Server 2005 Setup beginning at Tue Apr 24 16:17:14 2007
Process ID : 2864
\irv144C$SQL2005Std-x64disc1setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/3/24 16:17:14
Complete: LoadResourcesAction at: 2007/3/24 16:17:14, returned true
Running: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14
Loaded DLL:\irv144C$SQL2005Std-x64disc1xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Mon Jun 13 14:30:00 2005
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "2864"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2007/3/24 16:17:14
Complete: ValidateWinNTAction at: 2007/3/24 16:17:14, returned true
Running: ValidateMinOSAction at: 2007/3/24 16:17:14
Complete: ValidateMinOSAction at: 2007/3/24 16:17:14, returned true
Running: PerformSCCAction at: 2007/3/24 16:17:14
Complete: PerformSCCAction at: 2007/3/24 16:17:14, returned true
Running: ActivateLoggingAction at: 2007/3/24 16:17:14
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
0000000000EDAF90Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.
View 1 Replies
View Related
May 8, 2007
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
View 2 Replies
View Related
Jun 24, 2015
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
View 4 Replies
View Related
May 29, 2007
Hi Everyone,
I have problem when installing SQL 2005 Enterprise to my Windows 2003 R2 cluster. I install the SQL instance on the first node in my cluster, it analyses the cluster and comes up with no errors or warnings, i answer all the installation questions and proceed with the installation. When installing the SQL engine I see the status changing as the instance is started and then stopped again etc, finally the status changes to "removing backup files" when it get an error that reports:
"The setup has encountered an unexpected error while Completing Commit. The error is: The specified module could not be found."
Unfortunately there isnt any more information to go on. Any help would be appreciated.
View 2 Replies
View Related
Mar 8, 2001
could someone please explain the following error msg! the code seg that is gen the error is as follows, followed by the err msg. I"m trying to update a table on a linked server (paeddb1.gold). both servers are running MS SQL7
update paeddb1.gold.dbo.controls_peg
set amt = t.amt
from #temp_peg_control t, paeddb1.gold.dbo.controls_peg p
where t.peg = p.peg
and t.cntl_type = p.cntl_type
and t.fy = p.fy
Could not open table '"gold"."dbo"."controls_peg"' from OLE DB provider 'SQLOLEDB'. The provider could not support a row lookup position. The provider indicates that conflicts occurred with other properties or requirements.
[OLE/DB provider returned message: Errors occurred]
View 2 Replies
View Related
Sep 19, 2005
I have a "linked server" configured in my SQL Server 2000 (SP4) server, which used to work correctly. However, I had to reinstall SQL Server (I backed up and restored the master/model/etc databases, so all my settings stayed the same). Since then, I've been getting this error when I try to use the linked server:
Invalid schema or catalog specified for provider 'MSDASQL'.
OLE DB error trace [Non-interface error: Invalid schema or catalog specified for the provider.].
The linked server is a FoxPro database, which does not use catalog or schema names. So, my select syntax looks like this:
SELECT * FROM Server...Table
SQL Server is aparently expecting something like this:
SELECT * FROM Server.Catalog.Schema.Table
Does anyone know how I can fix it so that it allows the "empty dot" method to work like it used to?'
Thanks!
Josh
View 9 Replies
View Related
Apr 10, 2008
Hi Pals,
We have an SSIS package within which we are calling a stored procedure which eventually call a sql server dbo.fn() which contains code to lookup data inside oracle using Linked Server for Oracle.
We are calling the Package dynamically from the stored procedure by creating a SQL Server Agent Job, I am getting the below error very often. Can we fix the error in any way?
“EXEC sp_UpdateTname 369,'939390',2008 " failed with the following error: "Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "ORATEST".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
When I hard code global variables and ran the package I am able to see the successful execution of the package.
Can anybody point out where could the error lies?
View 1 Replies
View Related
Feb 20, 2008
I got the following error when using linked server:
OLE DB provider "SQLNCLI" for linked server "SACPANRPT" returned message "Cannot start more transactions on this session.".
Msg 7395, Level 16, State 2, Line 1
Unable to start a nested transaction for OLE DB provider "SQLNCLI" for linked server "SACPANRPT". A nested transaction was required because the XACT_ABORT option was set to OFF.
View 1 Replies
View Related
Jul 20, 2005
Hiwhen i try to run a query using linked servers, i get the followingerror.Server: Msg 125, Level 15, State 1, Line 1Case expressions may only be nested to level 10.I do have more than 10 case statements, it works fine when it is lessthan 10. can anyone tell me if there is a way to have more than 10case statements. thanks alot.Jaymy querySelect category, val, Sum(QTY) As QTY , yrFrom(Select val, QTY2 As QTY,KEEP = CaseWhen code = '004' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '005' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '003' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '017' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '007' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '008' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '009' And ((YR > 2003) Or (YR = 2003 And MON > 11))Then 'N'When CODE = '010' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '038' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '032' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '030' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'When CODE = '018' And ((YR > 2003) Or (YR = 2003 And MON > 12))Then 'N'Else 'Y' EndFromamf a Join linkedserver.source.dbo.table2 b On a.COM = b.COMWhere CATEGORY In ('1') And CODE In ('001','003','004','005')And b.YR Between 2003 And 2004 And b.MON <= 1) xWhere KEEP = 'Y'Group By CATEGORY, YR
View 2 Replies
View Related
Nov 23, 2007
HI
I have win 2003 64 sp2 SQL 2005 sp2. I downloaded an informix 64bit driver 3.00FC then set system dsn which works fine when i apply and test the connection.
I tried to create a new linked server using Microsoft OLE simple provider against the odbc when I get this error
Does anyone have any suggestions??
Many thanks
Robert
TITLE: Microsoft SQL Server Management Studio
------------------------------
"The test connection to the linked server failed."
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Cannot initialize the data source object of OLE DB provider "MSDAOSP" for linked server "CERP". (Microsoft SQL Server, Error: 7303)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3186&EvtSrc=MSSQLServer&EvtID=7303&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 28 Replies
View Related
Oct 30, 2007
Hello,
SQL Server version is Enterprise Edition 8.00.2039 SP4
and one oracle database linked via Microsoft OLe DB provider for Oracle. Oracle db name: SCP.
One of the job inserts data to sql database from querying oracle database; randomly fails with the error message below.
**************************
INSERT INTO mom_services ('SQL TABLE')
SELECT *
FROM OPENQUERY(SCP,'SELECT SERIAL_NO_ FROM SCADMIN.DEVICEM1 WHERE CONTAINER=''MOM''')
***************************
Server: Msg 7399, Level 16, State 1, Line 3
OLE DB provider 'MSDAORA' reported an error.
[OLE/DB provider returned message: Oracle error occurred, but error message could not be retrieved from Oracle.]
OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005: ].
What I have done;
Oracle client uninstalled server restarted and oracle client installed .
Linked server deleted and recreated but nothing changed.
Any ideas ?
Osman
View 5 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Sep 10, 2015
Due to a SQL 2014 cluster installation failure related to security while setting up the primary node, I had to remove the node and any related installation programs from the node and redo the installation again. However I am unable to use the machine name as the SQL network name during the instance configuration, I get the following:
Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: The SQL Server failover cluster instance name "MachineName" already exists as a server on the network. Specify a different failover cluster instance name.I am still getting the same name since the node name "MachineName" is listed under the cluster name. I have used machine name as SQL network name without an issue. I do not have any existing SQL machine name in network using same machinename which I want to use for this installation.
View 9 Replies
View Related
Jan 10, 2007
When the setup program tries to start the database service (the last step of installation), it indicates an error 29503.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (17058)
Any help would be appreciated.
View 1 Replies
View Related
Oct 17, 1999
I'm trying to execute commands on a SQL Server on the same domain. Following the instructions, I called sp_addlinkedserver N'LinkSQLSrvr', ' ', N'SQLOLEDB', N'NetSQLSrvr' then sp_addlinkedsrvlogin N'LinkSQLSrvr', false, N'Joe', N'Visitor', N'VisitorPwd'. No complaints. When I execute a select statement, however (eg. select top 10 colname from LinkSQLSrvr.dbname.dbo.tblname) I get:
Server: Msg 7353, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' supplied inconsistent metadata. An extra column was supplied during execution that was not found at compile time.
Tried it on different combinations of local and remote servers and I get exactly the same error each time. Help!
View 3 Replies
View Related
Feb 10, 2003
SQL 2000
I have a process that calls several stored procs which access a database on a linked server.
code that fails:
SELECT DISTINCT em.er_id, em.er_name, bp.bpo_id, bp.bpo_name
FROM [dbrptc13dayoldprod].ues.dbo.Employer em
Inner Join [dbrptc13dayoldprod].ues.dbo.BPO bp ON
em.er_bpoid = bp.bpo_id
Error message:
Server: Msg 913, Level 16, State 8, Line 1 Could not find database ID 6. Database may not be activated yet or may be in transition.
The database is accessible from query analyzer with a simple select from the linked server. Also if I change any letter in the ues.dbo.Employer em or ues.dbo.BPO bp part to a different case it works fine.
For example: -changed the BPO to BPo- this works!
SELECT DISTINCT em.er_id, em.er_name, bp.bpo_id, bp.bpo_name
FROM [dbrptc13dayoldprod].ues.dbo.Employer em
Inner Join [dbrptc13dayoldprod].ues.dbo.BPo bp ON
em.er_bpoid = bp.bpo_id
Please help I can't figure this one out.
Thanks.
View 1 Replies
View Related
May 19, 2004
Server: Msg 7356, Level 16, State 1, Line 1 OLE DB provider 'SQLOLEDB' supplied inconsistent metadata for a column. Metadata information was changed at execution time.
OLE DB error trace [Non-interface error: Column 'customerID' (compile-time ordinal 1) of object '"ABCDB"."dbo"."vwCustomer_xxxxk"' was reported to have a DBCOLUMNFLAGS_ISNULLABLE of 0 at compile time and 32 at run time].
above error messages occurs when I try to run a proc which inside a query statement of select to a linked SQL6.5 database. The thing puzzled me is that
linked query to run outside the proc is just fine, but errors within the proc. the running server is MSDE 2k with sp3. Look at knowledgebase about "
DBCOLUMNFLAGS_ISNULLABLE" is only related to DB2 or SQL7 or SQL2000 before sp3.... man...
thanks
View 3 Replies
View Related
Apr 30, 2002
I'm running SQL Server 2000 and I have a linked server setup to another SQL Server 2000 box. I've got a stored procedure that creates a temporary table and is pulling information from local tables and from tables located on the linked server. When I run this stored procedure it bombs on me when it hits the linked server part returning an error message of:
Server: Msg 7391, Level 16, State 1, Procedure app_GetOfficeOrders, Line 29
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator.
Now I can run a query against a table located on the linked server that returns just a table count and everything works fine. I'm just having problems with that one stored procedure. Any suggestions would be appreciated.
P.S. I have verified that it isn't a time-out error and it isn't a permissions issues.
Thanks
View 1 Replies
View Related
Jan 16, 2004
I am trying to call an RPC from SQL2KSP3 to Sybase ASE 12.5. SQL2K is on an IBM Intel Server running Win2KSP4, ASE is on an IBM RS6000 w/ AIX 5.2.
I have the ASE server set up as a linked server in SQL 2000, and doing queries is working fine, i.e. I can
SELECT * FROM asesrvr.testdb.dbo.tablename
and get back all the data in tablename from the testdb database on the ASE server asesrvr.
However, when I try to run an RPC using the same syntax, I get a generic 7212 error (Could not execute procedure 'procname' on remote server 'asesrvr'. I am calling the rpc with
DECLARE @output char(1)
EXEC asesrvr.testdb.dbo.procname @output output
I'm using Sybase's ASE OLEDB provider; on the Linked Server Properties, I have
General Tab
Product name: asesrvr
Data source: devprod
Provider string: <empty>
Location: greyed out
Catalog: <empty>
Security Tab
One local login, sa, which has impersonate checked as the sa passwords on the two servers are the same (I want to eliminate security as an issue while I try to get this working).
Server Options Tab
Collation Compatible: checked
Data Access: checked
RPC: checked
RPC Out: checked
Use Remote Collation: unchecked
Collation Name: <empty>
Connection Timeout: 0
Query Timeout: 0
SQL2K's @@version is
Microsoft SQL Server 2000 - 8.00.760 (Intel X86) Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
Any ideas on how I can troubleshoot this further? It does not appear to be limited to this one procedure (this one only has one output parameter and one line of code, so it's about as simple as it can get for testing purposes). Again, queries work fine, so the linked server itself is connected and working, at least for queries.
Thanks very much for your help,
Vince
View 2 Replies
View Related
Jan 20, 2004
Does Anyone know what this means?
I run the query in the attached file on multiple servers with success but some of them refuse to cooperate. I've tried recreating the linked server on the problem servers but this doesn't help. All I want to do is check db file size and free space and get it to work. Why does it have to be so damn complicated?
Any ideas welcome - including an entirely different way of doing this.
The script and table definitions in question are attached
Could not open table '"Helpdesk_New"."dbo"."LogStats"' from OLE DB provider 'SQLOLEDB'. The provider could not support a row lookup position. The provider indicates that conflicts occurred with other properties or requirements.
[OLE/DB provider returned message: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IOpenRowset::OpenRowset returned 0x80040e21: [PROPID=DBPROP_BOOKMARKS VALUE=True STATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_COMMANDTIMEOUT VALUE=600 STATUS=DBPROPSTATUS_OK], [PROPID=Unknown PropertyID VALUE=True STATUS=DBPROPSTATUS_OK], [PROPID=DBPROP_IRowsetLocate VALUE=True STATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_IRowsetChange VA...
View 1 Replies
View Related
Mar 15, 2004
I have setup a linked server to a Sybase database using the ODBC driver (which in turn uses the Sybase OLE DB provider). Logged onto the box as the SQL Service account everything is good. Using Enterprise Manager from any machine to the SQL Server box using an account that is a local administrator on the SQL Server box everything is good. However, if I attempt to make a connection via Enterprise Manager with an account that does not have local administrator rights on the server I get an error. I get the same error if I attempt an OPENQUERY against a table in the Linked server database. The error I receive is as follows:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: [SYBASE][ODBC Sybase driver]Allocation of a Sybase Open Client Context failed. Sybase normally generates a SYBINIT.ERR file contianing more specific reasons for failing.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBInitialize::Initialize returned 0x80004005: ].
The drives are secured so that only local administrators have rights to them.
I found in the Microsoft KB the follownig article:
http://support.microsoft.com/?kbid=814398
In this article it is suggesting that I need to open up the server from this lockdown. So, just to test this out without having to restart SQL Server I first allowed for full access to the C drive to "Everyone" and everything was good.
My question then is, has anybody else ran into this sort of thing? It doesn't seem right that I have to open up some folder on the database server to everyone in order to get a linked server going.
Thanks
View 2 Replies
View Related
Oct 25, 2007
I am trying to use a linked server and it works as long as I do not specify the sp_addlinkedserver @provstr parameter. If I specify that parameter I always get a 7416 "Access to the remote server is denied because no login-mapping exists" error. I have tried adding the logins various ways but it's very specific to the @provstr parameter, and it doesn't even matter what I put in that parameter. As soon as I put something in there whether it is valid or invalid, I get the error.
Anyone else seen this? There is an amazing lack of any discussion about the error when I search for it.
View 6 Replies
View Related
Apr 30, 2007
Need to be able to run update queries on DB2 on IBM MF from a Linked Server. Select and Insert queries work but Update and Delete queries don't. DB2 connect is installed and ODBC System dsn's are created for DEV and Production DB2 environments.
The ODBC drivers can be selected when running Imports/Exports but can't be specified through a linked server.
Any Ideas??
Tom...
View 1 Replies
View Related
