Running SQL2000 on Win2000 server. Installed Oracle8 client from Oracle for Winnt CD. This appeared to install OK could use SQL*PLUS to link to Oracle servers. Setting up a Linked server and then doing an openquery
gave an error:
' msadora reported an error
ole/db returned a message Oracle client & networking component were not found ..'
Any ideas? Should we have a Oracle for Win 2000 CD. It worked for SQL2000 on Winnt server.
Jim
Can someone please tell me what oracle software needs to be installed on a sql server machine that will link to an Oracle database on an NT4 machine.
Also can you also confirm if you have successfully executed an oracle stored procedure from sql server using the open query function. If yes, How? because I have read about people having prolems executing stored procedures with arguments using the OPENQUERY Function.
Thanks
I thought this may be very helpful for those of you using SQL7 linked server to Oracle 7.3.4 Database. After much research and no answers when opening a case with Microsoft I finally figured out how to delete using Openquery. There are a few missing pieces of information that would of been a great help in BOL. The first is, the Microsoft OLE DB for Oracle is not the correct choice for the data provier as one might think. The correct choice is the Oracle Provider for OLE DB. The next important thing is that the Oracle table you are querying MUST have a unique index on at least one column not necessarily the column in your WHERE clause. Thirdly, you get much better performance and use of indexes if you put the WHERE clause inside the OPENQUERY statement. Here is the syntax that I found to work in my application:
DECLARE @ins_id varchar(7)
DECLARE @sqlstring nvarchar(2000)
Select @ins_id = '123456'
Select @ins_id = convert(int, @ins_id)
select @ins_id
select @sqlstring = 'DELETE FROM OPENQUERY(LinkedServerName,"SELECT * FROM OracleTableName WHERE I_ID = '
+ '' + @ins_id + '' + '")'
select @sqlstring
EXEC sp_executesql @sqlstring
*Note...I had an additional data conversion from varchar to integer in my statement.
I hope this information helps any others who are having trouble performing this type of task.
I am running the following query trying to return server properties across a linked server. I want to store the results in a table on the server where I an running the query.
DECLARE @BuildClrVersionx nvarchar(128)
SET @BuildClrVersionx =
(SELECT *
FROM OPENQUERY(LKMSSQLXYZ01, 'CONVERT(nvarchar(128),SERVERPROPERTY("BuildClrVersion")'))
I am getting the following errors:
OLE DB provider "SQLNCLI" for linked server "LKMSSQLADM01" returned message "Deferred prepare could not be completed.".
Msg 8180, Level 16, State 1, Line 1
Statement(s) could not be prepared.
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONVERT'.
If you have any ideas how I can run this query across a linked server I would appreciate it.
Thanks,
Scott
Hi All - does anyone have a step by step guide as to what needs to be set up on the Server from the Oracle side, for Oracle linked servers to work ??
I keep getting the Eror 7399 ; OLEDB provider 'MSDAORA' reported an error.
Thanks,Jazz.
Hi!
I created linked server to Oracle 8.0.5 on ODBC data source. When I run query like:
select * from linked_server_name..Schema_name.Table_name
it hangs up
I read in Books Online that the syntax is:
linked_server_name.catalog.schema.object_name
What is the _catalog_?
And also, is there a way to run PASS THROUGH QUERY against linked server, but not using OPENQUERY?
Hi All - does anyone have a step by step guide as to what needs to be set up on the Server from the Oracle side, for Oracle linked servers to work ??
I keep getting the Eror 7399 ; OLEDB provider 'MSDAORA' reported an error.
Thanks,Jazz.
Does anyone know where I can get some good examples of how to set up a linked
server to an Oracle data source in SQL 2000? I can't seem to get a link
set up to my Oracle database. In particular I am wondering how the communication works between OLEDB to the Oracle Instance and how to trouble shoot issues (for example, would is the Oracle Listener what OLEDB is talking to?) Thanks!!
I was trying to figure out what the OPENQUERY Syntax is to Insert into SQL Server Table from Oracle Linked Server.
View 7 Replies View RelatedHi,
I am using the below SQL query for Oracle
SELECT FP_MONTH
FROM CDWD..CDW.ACCOUNT_SALES
WHERE LAST_MODIFIED_DT > '2002-12-01 00:00:00.000'
OR SOURCE_CONTROL_DT > '2002-12-01 00:00:00.000'
My questions are
1. If I am using this date fileter it is taking long time than without filter
Why ?.
2. How I can write Open query for the above query?.
I am expecting valuable advice.
Thanks,
Ravi
In SQL Server 2000 I have set up an Oracle linked server. When I runthe following query it runs fine:-SELECT*FROMOPENQUERY(LINKEDSERVERNAME,'SELECT * FROM ORACLETABLENAME')However the following query does not work:-SELECT*FROMOPENQUERY(LINKEDSERVERNAME,'SELECT FIELDNAME FROM ORACLETABLENAME')This error is returned:-Server: Msg 7321, Level 16, State 2, Line 1An error occurred while preparing a query for execution against OLE DBprovider 'MSDAORA'.[OLE/DB provider returned message: ORA-00904: "FIELDNAME": invalididentifier]OLE DB error trace [OLE/DB Provider 'MSDAORA' ICommandPrepare::Preparereturned 0x80040e14].Basically select * works ok, but if I specify the field(s) I need thenit errors. I have tried entering the field names in upper and lowercase but it makes no difference.My real problem is that some dates in the Oracle database are pre 1753which SQL server does not recognise so I need to convert (decode) them.Any help would be appreciated.ThanksChris
View 2 Replies View RelatedCurrently we are running SQL Server 7 with SP1 installed on an NT box. I need to update a field in a table in Oracle. I setup a linkedserver in SQL Server using the Microsoft OLE DB Provider for ODBC (MSDASQL) and didn't have any problems selecting data from the linked Oracle tables using OPENQUERY. For example: SELECT * FROM OPENQUERY(STATSDEV, "Select * from CR_EXPORT") This query works fine.
However, now I need to update a field in the CR_EXPORT table. So I have written the following query and I tried to run it:
UPDATE OPENQUERY(STATSDEV,
"SELECT * FROM CR_EXPORT WHERE REQUEST_NUMBER = 1")
SET STATUS = 2
I got the following error message:
Server: Msg 7352, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' supplied inconsistent metadata. The object '(user generated expression)' was missing expected column 'Bmk1000'.
The Oracle table has a unique index, so I think that the issue might be associated with the version of the OLE DB provider or the Service Pack, but I can not find any documentation to support my theory. Any help you could give would be VERY appreciated!
I need to run a report using a linked server on SQL 2005. The report was running really slow so I tried doing an OPENQUERY which makes it a lot faster. However, I need to pass some parameters and not sure how to do it using OPENQUERY. Here is the query:
SELECT RTRIM(client.ClientID) AS ClientID, client.name2 AS Client_Name, Project.Project, Project.StatutoryDueDate AS DueDate, Project.Extension1, Project.Extension2, Project.StartDate AS AsofDate, Project.PromiseDate AS CommitmentDate, Project.ReceivedDate AS InfoIn, Task.TaskID, Task.Empid, Task.ActualStartDate, Task.ActualFinishDate, Client.Partner,
STAFF.PersonalTitle AS PIC,
Client.Manager,
MGR.PersonalTitle AS TIC,
Client.Accountant,
ACCT.PersonalTitle AS AIC,
CASE WHEN Task.TaskID = 'PREP' THEN EMP.personaltitle END AS Prep_BY,
CASE WHEN Task.TaskID = 'REV' THEN EMP.personaltitle END AS Rev_By,
CASE WHEN Task.TaskID = 'PREP' THEN Task.ActualStartDate END AS Prep_Date,
CASE WHEN Task.TaskID = 'REV' THEN Task.ActualStartDate END AS Rev_Date,
CASE WHEN Task.TaskID = 'MAIL' THEN Task.ActualFinishDate END AS Mailed_Date,
CASE WHEN Task.TaskID = 'TESNT' THEN Task.ActualFinishDate END AS TE_OUT,
CASE WHEN Task.TaskID = 'TERCD' THEN Task.ActualFinishDate END AS TE_IN
FROM PROJECT, PROJCUS, TASK LEFT OUTER JOIN STAFF EMP ON TASK.EMPID = EMP.EMPID, CLIENT LEFT OUTER JOIN STAFF ON CLIENT.Partner = STAFF.EmpID LEFT OUTER JOIN STAFF MGR ON CLIENT.Manager = MGR.EmpID LEFT OUTER JOIN STAFF ACCT ON CLIENT.Accountant = ACCT.EMPID
WHERE CLIENT.ClientID = PROJECT.ClientID AND CLIENT.Engagement = PROJECT.Engagement AND PROJECT.Project = PROJCUS.Project AND
PROJECT.Engagement = PROJCUS.Engagement AND PROJECT.ClientID = PROJCUS.ClientID AND CLIENT.ClientID = TASK.ClientID AND CLIENT.Engagement = TASK.Engagement AND PROJECT.Project = TASK.Project AND CLIENT.DroppedDate IS NULL AND ((PROJCUS.[~Custom35])='BT') AND (CLIENT.OfficeID in (@OfficeID)) AND (PROJECT.Project in (@Project))
Hi,
I run openquery() from a client application(sql 2005) to query SSAS data(sql 2005) through a linked server(sql 2005), but I get the following error:
OLE DB provider "MSOLAP" for linked server "LINKEDMINING" returned message "An error was encountered in the transport layer.".
OLE DB provider "MSOLAP" for linked server "LINKEDMINING" returned message "The peer prematurely closed the connection.".
Msg 7303, Level 16, State 1, Procedure gettpdt, Line 3
Cannot initialize the data source object of OLE DB provider "MSOLAP" for linked server "LINKEDMINING".
And, I am sure that I have made the MSOLAP provider Allow inprocess.
What can i do for this. Please advise.
The following used to work before we had to chang the Linked Server Name (Out of my control)
select * from
openquery(LServ1,'SET FMTONLY OFF; exec [LServ1].database1.dbo.proc1 @issue_id=1,@extract_type=1')
Now the Linked Server Name changed from LServ1 ==> LServ1.DOMAINMSSQLSERVER,1200
(1200-Port #)
Now when i change the Linked Server Name, It gives me an error @ openquery.
I tried the following and so far no luck
select * from
openquery(LServ1.DOMAINMSSQLSERVER,1200,'SET FMTONLY OFF; exec [LServ1].database1.dbo.proc1 @issue_id=1,@extract_type=1')
and
select * from
openquery([LServ1.DOMAINMSSQLSERVER,1200],'SET FMTONLY OFF; exec [LServ1].database1.dbo.proc1 @issue_id=1,@extract_type=1')
Basically how do i specify the NEW Linked Server Name(as a paramter for "openquery"?)
Thanks!
Can anyone tell me, if, generally, the performance or the cost of executing a pass-through command on a linked server in SQL Server 2005 would be better using OPENQUERY or the new option with EXECUTE -- whether the two servers are on the same box or not? I haven't been able to find a comparison between the two.
Have there been any tests of the difference?
What effect on performance is there with 'rpc out' set with sp_serveroption so EXECUTE can be used?
To be more specific I have a development box with SQL Server 2005 and Oracle 9.2.
The new option with EXECUTE would be something like the example in MSDN (Example J.) at:
http://msdn2.microsoft.com/en-us/library/ms188332.aspx
EXEC ( 'SELECT * FROM scott.emp') AT ORACLE;
GO
I have a simple SQL statement that runs in a web-based admin system as follows:
INSERT INTO someTable SELECT * FROM OPENQUERY (someLinkedServer, 'SELECT someTable.* FROM someTable WHERE ID = 57')
This works fine on my development system, but on the production system I get the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "someDB" returned message "Unspecified error".
The linked server definitely exists on the production machine; and the following stored procedure has been run:
exec sp_addlinkedsrvlogin 'someLinkedServer', false, 'machinenameIUSR_macninename', 'Admin', NULLto allow the internet anonymous user account to log into the linked server.
Also:
-- the internet anonymous user has full control permissions over the Access database file
-- the internet anonymous user has full control permissions the administrator/local settings/temp directory (after I read somewhere that this could cause problems; though no such permission is needed to make it work on my development machine.)
As far as I can tell, the production machine (2003 Server) is configured the same way in all relevant respects as the development machine (2000 Server) where everything works.
With such a vague error message, I have no idea where to start, and would appreciate any advice.
Hello.
Suddenly OPENQUERY had started to raise an exception 'Msg 7355, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI" for linked server "sql2000" supplied inconsistent metadata for a column. The name was changed at execution time.'
The OPENQUERY stament looks like:
Code Block
SELECT * FROM OPENQUERY(sql2000, 'execute dbo.sc_List @AmountId = 24, @WorkMode=1, @SortMode=0')
I don't know what has been changed - seems that everyting is OK.
The problem is that sql2000 is MS SQL 2000 server and this statment is executed on the MS SQL 2005 server.
dbo.sc_List is a procedure that selects data and I need insert that data to the temporary table on the sql2005 server to make some calculations.
I've used OPENQUERY to prevent DTC coordinator from starting distributed transaction.
Whole statement originally looks like
Code Block
INSERT INTO #Templates SELECT * FROM OPENQUERY(sql2000, 'execute dbo.sc_List @AmountId = 24, @WorkMode=1, @SortMode=0')
where #Template is temporary table with columns that exactly match with stored procedure output.
Help me please - what is wrong with sql servers? I know that this query has been working fine for a months and now - such strange errors. I should say also that strored procedure returns always the same columns when called - there is one large select inside it.
Thank you.
s w
I'm trying to create linked server to access DMX functions from SQL Server as per:
Executing prediction queries from the relational server
http://www.sqlserverdatamining.com/DMCommunity/TipsNTricks/3914.aspx
I create the link this query
EXEC master.dbo.sp_addlinkedserver
@server = N'KLSSQL01AnalysisServerLink',
@srvproduct=N'Analysis Services 2005',
@provider=N'MSOLAP',
@datasrc=N'kls-sql01',
@catalog=N'AnalysisServicesPredictorPrototype'
GO
SELECT * FROM OPENQUERY(KLSSQL01AnalysisServerLink, 'select node_caption, node_type from [Misuse Abuse Profile].content')
where [Misue Abuse Profile] is the Mining model
Provider options: Allow in process
I receive the follwing error:
OLE DB provider "MSOLAP" for linked server "KLSSQL01AnalysisServerLink" returned message "An error was encountered in the transport layer.".
OLE DB provider "MSOLAP" for linked server "KLSSQL01AnalysisServerLink" returned message "The peer prematurely closed the connection.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSOLAP" for linked server "KLSSQL01AnalysisServerLink".
I found this post but there was no resolution.
run openquery(mdx) through a linked server
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=924869&SiteID=1
Is there any step by step help sites for setting up SQL 2005 linked (oracle 10) server?
I find MSDN articles but they referance winNT and 2000, I'm not getting very far and I'm not a DBA but need to get this working asap.
I'm posting this because I found this solution after much digging.
The goal here is to incorporate a variable parameter within a OPENQUERY and, ultimately build a dynamic Where clause for use within a OPENQUERY linked server routine. I'm posting because I spent a lot of time trying to get this to work and also, have seen other posts here that hinted it wasn't doable.
First of all - there a good quick article that gets close for FoxPro and possibly works as is for ACCESS:
http://support.microsoft.com/default.aspx?scid=kb;en-us;314520
Here's code for a solution:
DECLARE @OPENQUERY nvarchar(4000),
@TSQL nvarchar(4000),
@FAMILY CHAR(10)
SET @FAMILY='Touring'
SET @OPENQUERY = 'SELECT * FROM OPENQUERY(VFP,'''
SET @TSQL = 'select cov,family,model from vinmast where family='+'['+@FAMILY+']'')'
EXEC (@OPENQUERY+@TSQL)
All shown are single quotes.
In Visual Foxpro, ' ' or " " or [ ] can be used a delimeters
In addition, if wanting to build a dynamic where clause, you could do something like:
SET @TSQL = 'select cov,family,model from vinmast '
IF <some condition met to include FAMILY filter>
Begin
SET @TSQL=@TSQL+'where family=['+@DUTFAMILY+']'''
SET @TSQL=@TSQL+ ')'
End
-----------------
Here's the entire Stored Procedure:
CREATE PROCEDURE dbo.ewo_sp_DUTLookup
(
@DUTPROJECT char(25)=NULL,--Project
@DUTFAMILY char(10)=NULL,--Family
@DUTMODEL char(20)=NULL,--Model
@DUTYEAR char(4)=NULL,--Model Year
@DUTBEGIN char(25)=NULL,--Beginning of COV/DUT number
@DEBUG int=0
)
AS
DECLARE @OPENQUERY varchar(4000),
@TSQL varchar(4000),
@TWHERE varchar(4000),
@intErrorCode int
select @intErrorCode = @@ERROR,
@TSQL='',
@TWHERE=''
IF @intErrorCode=0
Begin
SET @OPENQUERY = 'SELECT * FROM OPENQUERY(VFP,'''
SET @TSQL = ' select dut_pk,cov,family,model,project,modelyr from vinmast '
End
set @intErrorCode = @@ERROR
IF @intErrorCode = 0 and
@DUTFAMILY is not NULL or
@DUTMODEL is not NULL or
@DUTPROJECT is not NULL or
@DUTYEAR is not NULL or
@DUTBEGIN is not NULL
set @TWHERE=' where '
-- Check for Family criteria
If @intErrorCode = 0 and @DUTFAMILY is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' family=['+@DUTFAMILY+'] AND '
set @intErrorCode = @@ERROR
-- Check for Model criteria
If @intErrorCode = 0 and @DUTMODEL is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' model=['+@DUTMODEL+'] AND '
set @intErrorCode = @@ERROR
--Check for Project criteria
If @intErrorCode = 0 and @DUTPROJECT is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' project=['+@DUTPROJECT+'] AND '
set @intErrorCode = @@ERROR
--Check for Model Year
If @intErrorCode = 0 and @DUTYEAR is not NULL and Len(@TWHERE)>0
SET @TWHERE=@TWHERE+' modelyr=['+@DUTYEAR+'] AND '
set @intErrorCode = @@ERROR
--Check for beginning of DUT
If @intErrorCode = 0 and @DUTBEGIN is not NULL and Len(@TWHERE)>0
Begin
SET @DUTBEGIN=RTRIM(@DUTBEGIN)
SET @TWHERE=@TWHERE+' substr(cov,1,'+cast(len(@DUTBEGIN) as char(20))+')=['+@DUTBEGIN+'] AND '
End
set @intErrorCode = @@ERROR
IF @intErrorCode=0 AND substring(@TWHERE,Len(@TWHERE)-3,4)=' AND '
Begin
set @TWHERE=Substring(@TWHERE,1,Len(@TWHERE)-3)
select @intErrorCode=@@ERROR
End
SET @TWHERE=@TWHERE+''')'
IF @debug<>0 and @intErrorCode=0
Begin
print @intErrorCode
print @OPENQUERY
print @TSQL
print @TWHERE
print @OPENQUERY+@TSQL+@TWHERE
End
IF @intErrorCode=0
EXEC (@OPENQUERY+@TSQL+@TWHERE)
GO
Peter
Hi All -
My Set up:
Server A - Oracle 10g Database
Server B - SQL2005
Client PC - Sql Express
Server A holds all data. I am using a linked server to connect server A and B. I use a set of stored procedures containing the openquery() syntax to get data from Server A to Server B. These stored procedures run every 20 minutes. I then create a publisher on Server B. I subscribe from the client PC to publisher to get data down from Server B to client(Download only subscription).
When I fire up the stored procedures and attempt to replicate, everything works fine. It appears after about 4-5 hours of the stored procedures running replication begins to hang more and and more until eventually it hangs for about 10 minutes and I recieve the following error:
Command attempted:
{call sp_MSreleasemakegenerationapplock}
Error messages:
The merge process was unable to create a new generation at the 'Publisher'. Troubleshoot by restarting the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147200994)
I'm not sure if there is an error with openquery() locking? There is some locking activity going on with the TempDB and and Server B database. I've also come across some threads talking about the agent profiles. I'm very new to replication and very confused by all of the options in the agent profiles. Any help would be greatly appreciated!
Hi--
I am running SQL Server 2005 on Win2k3:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.086.1830.00 (srv03_sp1_rtm.050324-1447)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 6.0.3790.1830
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
I have the OraOLEDB.Oracle provider installed to the (C:oraclexe) directory.
I am having problems querying from linked oracle server. When i setup oracle as a linked server and purposely enter an incorrect password the query i run tells me i have an incorrect password. So it at least knows that. when i set the correct password and run a query I get this error:
(i replaced the real server name with "someServer".)
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "SomeServer".
This is how I set up my Linked server:
Provider: "Oracle Provider for OLE DB"
Product Name: SomeServer
Data Source: SomeServer
Provider String: "Provider=OraOLEDB.Oracle;Data Source=SomeServer;User Id=MyLogin;Password=MyPassword"
The query I run is:
Select * from [Someserver].[schema or database]..[tbl_name]
Any help??? What am i missing?
I'd like to modify the dates within this where clause to be dynamic, building the date depending on the current year, but everything I try doesn't seem to be syntactically correct.
SELECT *
FROM Openquery(LS_CIS, 'select * from BI_WRKFLW_TASKS where (BI_EVENT_DT_TM>=''1/1/2011'' and (BI_NEEDED_DT_TM>=''1/1/2011''))OR (BI_EVENT_DT_TM>=''1/1/2011'' and BI_NEEDED_DT_TM is null)') AS derivedtbl_1
I'd like to replace ''1/1/2011''Â in the where clause with something like:
CAST(CAST(YEAR (GETDATE())-4 AS varchar) + '-' + CAST(01 AS varchar) + '-' + CAST(01 AS varchar) AS DATETIME)
Hello,
pls. let me know where I could post if this is the wrong place.
I have a Firebird 1.5 application. I created a linked server from my SQL
Server 2000 to the firebird database. In SQL Server Query Analyzer I get errors from various ODBC drivers with "normal" queryies like
SELECT LVNR FROM LINKEDSRV...LVVERW
Pls. note, this all works perfectly in MS Access databases with ODBC-Links to Firebird!
From a programmer of a commercial ODBC driver I heard that this problem may be caused internally by SQL Server, there may be no solution possible in the ODBC driver. One workaround would be to use the OPENQUERY-Syntax like
SELECT * FROM OPENQUERY(LINKEDSRV, 'select LVNR from LVVERW ')
Are there any other solutions? Are there any known issues with firebird odbc-drivers and sql server? Are
there any known good drivers for the use with sql-server? What is the purpose of OPENQUERY - workaround ODBC problems? Are there any settings in SQL Server 2000 (2005 Express) that could help? Are there any settings in ODBC DSN that would help?
regards
arno
PS: Here are my favorite error messages
Error -2147217900 [OLE/DB provider returned message: Dynamic SQL Error
SQL error code = -104
Token unknown - line 1, char 89
"Col1014"] (Source: Microsoft OLE DB Provider for SQL Server) (SQL State:
01000) (NativeError: 7312)Error -2147217900 OLE DB-Fehlertrace [OLE/DB
Provider 'MSDASQL' ICommandPrepare:repare returned 0x80004005: ].
(Source: Microsoft OLE DB Provider for SQL Server) (SQL State: 01000)
(NativeError: 7300)Error -2147217900 Der OLE DB-Provider 'MSDASQL' meldete
einen Fehler. (Source: Microsoft OLE DB Provider for SQL Server) (SQL
State: 42000) (NativeError: 7399)
This "tricky" query does not work:
SELECT LVNR FROM LINKEDSRV...LVVERW;
Error -2147217900 OLE DB-Fehlertrace [Non-interface error: Column
'ERHALTENABSCHLAG' (compile-time ordinal 35) of object 'LVVERW' was reported
to have a DBTYPE of 5 at compile time and 131 at run time]. (Source:
Microsoft OLE DB Provider for SQL Server) (SQL State: 01000) (NativeError:
7300)Error -2147217900 Der OLE DB-Provider 'MSDASQL' hat inkonsistente
Metadaten für eine Spalte übergeben. Die Metadateninformationen wurden zur
Ausführungszeit geändert. (Source: Microsoft OLE DB Provider for SQL
Server) (SQL State: 42000) (NativeError: 7356)
As i have to handle the empty result set from and open query call to linked analysis server in dynamic SQL. If there is no data returning from the query then i just wanted to display message with no data.In current scenario it gives me below the error.
Msg 7357, Level 16, State 2, Line 13
Cannot process the object "MDX QUery".
The OLE DB provider "MSOLAP" for linked server "CO1BMXPSQL08" indicates that either the object has no columns or the current user does not have permissions on that object.
One of our Oracle Tables changed and I am wondering if there's any way that I can query all of our Stored Procedures to try and find out if that Oracle Table Name is referenced in any of our SQL Server Stored Procedures OPENQUERY statements?
View 2 Replies View RelatedI'm trying to use linked server to import big amount of data(around 9 million rows) from mysql to a sql 2005 table.
I plan to create a stored procedure and use job agent to run it at off-peak time everyday. The SP is like:
.....
Truncate table sqltblA;
Insert Into sqltblA(col1, col2, col3)
Select col1, col2, col3
From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB')
.....
But when I tried to CREATE the above SP from management studio, seems the sql server was trying to get all data from table mytblB and ended up with failure after several minutes hang. The error message is sth. like "running out memeory". BTW, during that several minutes hang, I can't query mytblB using mysql's tool as well. it seems to me that table got locked.
However if i try to change the returned result to 100,000 rows by changing script to
Insert Into sqltblA(col1, col2, col3)
Select col1, col2, col3
From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB Limit 100000')
The SP could be created without any problem and running the SP could get the data in table sqltblA.
But that's not what I want, I need all rows instead of a certain amount of rows.
Does anyone know what's going on there when I try to CREATE that SP and any solution to it?
Plus I tried to use SSIS as well. When I'm configuring the DataReader source, which uses ADO.NET's ODBC option to connect to mysql, if its sqlcommand is "select * from mytblB" without the Limit key word, then the configuration page will hang there as well and table mytblB is not accessible by using mysql tool. I'm just sick of wasting time on that and that's why I chose to use SP istead of SSIS. But same result. :-(
Is it that I have a syntax error in the nested OPENQUERY or is there another issue? Do I need to specify a different provider in the Server Link such as OLEDB? Non-nested OPENQUERYs work fine.
I'm generally following theTips and Tricks article.
"Executing predictions from the SQL Server relational engine". One problem is the sample doesn't actually complete the example query after the second nested OPENQUERY call.
e.g.
SELECT * FROM OPENQUERY(DMServer,
'select €¦ FROM Modell PREDICTION JOIN OPENQUERY€¦')
The SQL Server server link's provider is configured to allow adhoc access. I appears that the inner OPENQUERY cannot be prepared by Analysis Server or the Server link provider? but I need to return a key value t.[CardTransactionID] for joining to SQL Server data elements.
OLE DB provider "MSOLAP" for linked server "DMServer" returned message "Errors in the back-end database access module. The data provider does not support preparing queries.".
Msg 7321, Level 16, State 2, Line 2 An error occurred while preparing the query
SELECT * FROM OPENQUERY(DMServer,
'SELECT
t.[CardTransactionID],
t.[PostingDate],
[Misuse Abuse Profile].[Even Dollar Purchase],
PredictProbability([Misuse Abuse Profile].[Even Dollar Purchase]) AS Score,
PredictSupport([Misuse Abuse Profile].[Even Dollar Purchase]) AS Suppt,
t.[BillingAmount]
FROM
[Misuse Abuse Profile]
PREDICTION JOIN
OPENQUERY([Athena Dev],
''SELECT
[CardTransactionID],
[PostingDate],
[BillingAmount],
[AccountNumber],
[SupplierStateProvinceCode],
[MerchantCategoryCode],
[PurchaseIDFormat],
[TransactionTime],
[TaxAmountIncludedCode],
[Tax2AmountIncludedCode],
[OrderTypeCode],
[MemoPostFlag],
[EvenDollarPurchase]
FROM
[dbo].[vMisuseAbuseProfile]
'') AS t
ON
[Misuse Abuse Profile].[Account Number] = t.[AccountNumber] AND
[Misuse Abuse Profile].[Supplier State Province Code] = t.[SupplierStateProvinceCode] AND
[Misuse Abuse Profile].[Merchant Category Code] = t.[MerchantCategoryCode] AND
[Misuse Abuse Profile].[Purchase ID Format] = t.[PurchaseIDFormat] AND
[Misuse Abuse Profile].[Transaction Time] = t.[TransactionTime] AND
[Misuse Abuse Profile].[Tax Amount Included Code] = t.[TaxAmountIncludedCode] AND
[Misuse Abuse Profile].[Tax2 Amount Included Code] = t.[Tax2AmountIncludedCode] AND
[Misuse Abuse Profile].[Order Type Code] = t.[OrderTypeCode] AND
[Misuse Abuse Profile].[Memo Post Flag] = t.[MemoPostFlag] AND
[Misuse Abuse Profile].[Even Dollar Purchase] = t.[EvenDollarPurchase]
')
In desparation I tried returning the case key (CardTransactionID) and the predictive column elements but I get an error when I try that. I assume this is a no-no?
OLE DB provider "MSOLAP" for linked server "DMServer" returned message "Error (Data mining): Only a predictable column (or a column that is related to a predictable column) can be referenced from the mining model in the context at line 2, column 15.".
Is it possible to link to an SQL 2005 server db from a SQL 2000 server? Is there a driver for this?
View 1 Replies View Relatedcan anybody tell me about Linked Servers and their uses and how to add a linked server to my Sql Server 2005.
any help on this would be highly appreciated.
Hello All,
I have been trying to Link two sql servers on two different machines over the Internet without any luck. Can someone point me to information about doing this with good examples?
Thanks
I currently have a main SQL Server which had a column on the majority of the tables. This column also had a check contraint on it. I dropped the column and the constraint and I now get the following message when trying to query the tables through a linked server 'OLE DB provider 'SQLOLEDB' supplied inconsistent metadata. An extra column was supplied during execution that was not found at compile time.'.
Can anyone help