Linked Server Failure On SQL Server 2005 Cluster
Jan 14, 2008
Hi,
I created a linked server from SQL server 2005 (cluster) to SQL server 2000. When i try to execute the query from local server i get this error
OLE DB provider "SQLNCLI" for linked server "Rem_serv" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'rem_User'.
Please help
Thanks and regards
Helen
View 3 Replies
ADVERTISEMENT
Feb 9, 2007
I'm trying to connect to another slq server db through a linked server (and synonyms) but I get the following error.
Exception has been thrown by the target of an invocation. ---> System.Data.SqlClient.SqlException: The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction. ,Unable to start a nested transaction for OLE DB provider "SQLNCLI" for linked server "BURT". A nested transaction was required because the XACT_ABORT option was set to OFF. , at Westfalia.TDMN.TxObjects.TxBurtOCIInterface.BurtOCIPalletChangedRecords_Get() , --- End of inner exception stack
I've set up MSDTC and executed the procedures noted in MS's article ID 873160. I am using 2005, but the Burt server is 2000. I can run the stored procedure from my server, which queries theirs. But when I execute the sp from a service, I get the error. Any help would be greatly appreciated.
View 1 Replies
View Related
May 8, 2007
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
View 2 Replies
View Related
Dec 28, 2007
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
View 2 Replies
View Related
May 14, 2008
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
View 1 Replies
View Related
May 6, 2008
We currently run a mixture of SQL 2000 and SQL 2005 systems, all of which run under the same domain user account. We are trying to reconfigure these systems so that each server has a dedicated service account in the domain.
I'm trying to get my clustered SQL 2005 server to talk to a SQL 2000 server using a Linked Server connection. This works fine for all of our existing systems (shared account). The service account used by all the sql servers has an SPN setup for each linked server. It is not working when I try to connect to my new server that uses a different service account. Here are some details:
SQL Cluster: Windows name PRDJOB01 (nodes named JOB01A and JOB01B). The SQL name is SQLJOB01 - WIndows 2003/SQL 2005 latest service packs for both
Linked server: DEV04INSTANCE1 - Windows 2003/SQL 2000, latest service packs for both.
SQLJOB01 runs under the account SQLService. It has an SPN for MSSQLSvc/DEV04.MYDOMAIN.COM:1234 where 1234 is the TCP port for the instance INSTANCE1.
DEV04 runs under the domain account SQLDEV04
I have tried configuring both DEV04 and SQLDEV04 to be allowed to delegate any service
Every time I try to connect to my linked server it fails with a "login failed for user '(null)'". If I create a linked server on a SQL 2000 system (also running under the SQLService account) to DEV04INSTANCE1, it works fine.
Do I need to setup an SPN for each node of the cluster to register the SQL instance name (SQLJOB01)? The Technet document that discusses setting up a virtual server (http://support.microsoft.com/kb/319723) has not been helpful for a cluster, despite being referenced in the BOL article on setting up linked servers for clusters.
Thanks
View 2 Replies
View Related
Jan 31, 2008
I have a stored procedure that retrieves data via a linked server that is running on a local instance of SQL Express 2005. This has been working without problems for some time.
We are now trying to move the database with the links to either SQL Express 2005 running on a server, or an instance of SQL Server 2005. In both cases I can successfully link the servers but when the stored procedure executes it fails on the select statement from the linked server with the following message:
OLE DB provider "SQLNCLI" for linked server "mosier" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18452, Level 14, State 1, Line 0
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Why is the user name null? I've tried explicitly setting login information by running the sp_addlinkedsrvlogin procedure but get the same results. In all cases logins should be using windows authentication and all the servers are inside the corporate firewalls.
I presume there is some property somewhere that is different between the SQL instances that work and the ones that don't but I haven't been able to find anything.
View 5 Replies
View Related
May 7, 2015
We are currently having the following problem. When trying to connect using "Be made using the login's current security context" I am getting the following error message "Login Failed for NTAuthorityAnonLogin". Yesterday this worked. The setup is as follows
SQL2008R2, nine instances on a cluster. The instance can use "current security context" when both instances are on the same node ie instance 1 node a to instance 2 node a , but when one is on node a and the other is on node b, i.e., instance 1 node 1 to instance 2 node b, we get the error above.
View 4 Replies
View Related
Oct 19, 2006
Installing SQl2005 into on Win2003 2 node cluster, at the very end of the
setup receive a message 'Remote Setup failed'. Referred to some sql logs
and found this;
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 1603
Aborting queue processing as nested installer has completed
Message pump returning: 1603
I've seen some similar errors on the web and suggestions about the Task
Scheduler being started on both nodes, but I ensured these were both started
before the install. SQL2005 does seem to be ok on the node1 where the
install was made, but fails when trying to failover to node 2.
Any help would be much appreciated here.
Thanks
Darren
View 1 Replies
View Related
Sep 10, 2015
Due to a SQL 2014 cluster installation failure related to security while setting up the primary node, I had to remove the node and any related installation programs from the node and redo the installation again. However I am unable to use the machine name as the SQL network name during the instance configuration, I get the following:
Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: The SQL Server failover cluster instance name "MachineName" already exists as a server on the network. Specify a different failover cluster instance name.I am still getting the same name since the node name "MachineName" is listed under the cluster name. I have used machine name as SQL network name without an issue. I do not have any existing SQL machine name in network using same machinename which I want to use for this installation.
View 9 Replies
View Related
Apr 24, 2015
Need to set up a linked server in two node SQL Cluster pointing to a standalone SQL thru security setting "be made using current login's security context". It's double hop Kerberos setup. Cluster uses a domain account, so we manually set SPNs for that account with both instance name and protocol as well (set up these SPNs with SQL virtual name only).
Also, constrained delegation has been set to that stand alone SQL services (MSSQLSvc).
Both SQL cluster and standalone servers are in same domain, cluster service account is domain account and standalone SQL uses default SQL local service account.
Coming to SQL, when I create linked server, sometimes it lets me create without issues and sometime it throws this below warning and even if I create it won't work.
Login failed for user 'NT AUTHORITY/ANANOMOUS LOGIN'.
View 6 Replies
View Related
Aug 16, 2007
Hi we have a two node windows 2003 x64 cluster, each running a SQL 2005 instance. I've added a new node to the cluster and am now trying to set up a new instance of SQL 2005 on the new node (node c). During the install i am getting a failure just after the stage where you choose the features to install. I'm selecting SQL database engine with Failover Cluster. When i click next i get a message which states:
"The drive specified cannot be used for program location. Program Files must be installed on a valid local disk available on all cluster nodes. The valid values are"
I've read a number of articles about possible causes for this and i've checked all the suggested causes but none of these have made a difference. The cluster disk resource is healthy and can be failed between all nodes in the cluster. No errors are generated. I am using an account which has domain admin rights and I can access all admin shares on all nodes. Some of the articles i have referenced are here:
http://support.microsoft.com/kb/907261
http://support.microsoft.com/?kbid=913815
http://blogs.technet.com/mbaher/archive/2007/03/23/clustering-sql-2005-and-administrative-shares.aspx
I've tried uninstalling all components etc but still i can't get it to work. The next step is rebuilding the server completely so does anyone have any suggestions?
Any suggestions would be greatly appreciated.
Thanks
Chris
View 2 Replies
View Related
Aug 5, 2007
Hi,
While I installed on the active node I got the following error: A recently applied update, KB921896, failed to install
After that installation finished , but query the server version I get:
SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition')
9.00.1399.06 RTM Standard Edition
On the Visual Studion Manager Help About I get 9.00.3042
Error logs are below. Can you please tell me how can I overcome this?
TIA.
I paste here the summary and the hotfix logs of the primary node.
There is also the Redist9_Hotfix_KB921896_SqlSupport.msi.log but it is too long to paste here.
summary.txt:
Time: 07/29/2007 02:46:28.253
KB Number: KB921896
Machine: DB1
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: Yes
Log Location on Passive Nodes:
(DB1) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
(DB2) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.1.2047 x86
Database Services (MSSQLSERVER) ENU RTM 2005.090.1399.00 x86 STANDARD
Integration Services ENU SP1 9.00.2047.00 x86 STANDARD
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 STANDARD
MSXML 6.0 Parser ENU 6.00.3883.8 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File :
Error Number : 11009
Error Description : No passive nodes were successfully patched
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Reboot Required
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log
Error Number : 3010
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 3883
Product Version (Final) : 6.10.1129.0
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 1704
Product Version (Final) : 2004
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
No passive nodes were successfully patched
Exit Code Returned: 11009
hotfix log:
I paste here only part of the file were I think I see errors (because the post fails on complete logs)
07/29/2007 02:24:37.934 ================================================================================
07/29/2007 02:24:37.949 Hotfix package launched
07/29/2007 02:24:37.965 Registry: Opened registry key "SOFTWAREMicrosoftWindowsCurrentVersion"
07/29/2007 02:24:37.965 Registry: Read registry key value "CommonFilesDir", string value = C:Program FilesCommon Files
07/29/2007 02:24:37.965 Registry: Opened registry key "SOFTWAREMicrosoftWindowsCurrentVersion"
07/29/2007 02:24:37.965 Registry: Read registry key value "ProgramFilesDir", string value = C:Program Files
07/29/2007 02:24:37.980 Local Computer:
07/29/2007 02:24:37.980 Target Details: DB1
07/29/2007 02:24:37.980 commonfilesdir = C:Program FilesCommon Files
07/29/2007 02:24:37.980 lcidsupportdir = f:33a341363e4f5937131539f11033
07/29/2007 02:24:37.980 programfilesdir = C:Program Files
07/29/2007 02:24:37.980 programfilesdir_wow = C:Program Files
07/29/2007 02:24:37.980 supportdir = f:33a341363e4f5937131539f1
07/29/2007 02:24:37.996 supportdirlocal = f:33a341363e4f5937131539f1
07/29/2007 02:24:37.996 windir = C:WINDOWS
07/29/2007 02:24:37.996 winsysdir = C:WINDOWSsystem32
07/29/2007 02:24:37.996 winsysdir_wow = C:WINDOWSSysWOW64
07/29/2007 02:24:37.996
07/29/2007 02:24:38.012 Enumerating applicable products for this patch
07/29/2007 02:24:38.027 Found Redist 2005 product definition
07/29/2007 02:24:38.121 Registry: Opened registry key "SOFTWAREMicrosoftWindowsCurrentVersion"
07/29/2007 02:24:38.121 Registry: Read registry key value "CommonFilesDir", string value = C:Program FilesCommon Files
07/29/2007 02:24:38.121 Registry: Opened registry key "SOFTWAREMicrosoftWindowsCurrentVersion"
07/29/2007 02:24:38.121 Registry: Read registry key value "ProgramFilesDir", string value = C:Program Files
07/29/2007 02:24:40.105 Found Redist 2005 product definition
07/29/2007 02:24:40.137 Found Redist 2005 product definition
07/29/2007 02:24:40.152 Registry: Opened registry key "SOFTWAREMicrosoftWindowsCurrentVersion"
07/29/2007 02:24:40.152 Registry: Read registry key value "CommonFilesDir", string value = C:Program FilesCommon Files
07/29/2007 02:24:40.152 Registry: Opened registry key "SOFTWAREMicrosoftWindowsCurrentVersion"
07/29/2007 02:24:40.152 Registry: Read registry key value "ProgramFilesDir", string value = C:Program Files
07/29/2007 02:24:56.168 Found SQL 2005 product definition
07/29/2007 02:25:00.293 Enumeration: Determining QFE level for product instance MSSQLSERVER
07/29/2007 02:25:00.309 Enumeration: Associated hotfix build information not found for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSQLServr.exe
07/29/2007 02:25:00.309 Enumeration: Found following QFE level for product instance MSSQLSERVER: 1399
...
07/29/2007 02:30:06.090 Locked file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLinnsqlagent90.exe (SQLSERVERAGENT [SQLAGENT90.EXE] - 3284)
07/29/2007 02:30:06.387 Locked file: C:Program Filesmicrosoft sql server90sharedsqlbrowser.exe (SQLBrowser [sqlbrowser.exe] - 1480)
07/29/2007 02:30:58.137 Attempting to pause the 32 bit ngen queue
07/29/2007 02:30:58.902 Installing product: Redist9
07/29/2007 02:30:58.918 Installing instance: Setup Support Files
07/29/2007 02:30:58.934 Installing target: DB1
07/29/2007 02:30:58.934 Installing file: SqlSupport.msi
07/29/2007 02:30:59.027 Copy Engine: Creating MSI install log file at: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
07/29/2007 02:30:59.027 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
07/29/2007 02:30:59.027 Registry: Cannot read registry key value "Debug"
07/29/2007 02:31:29.730 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
07/29/2007 02:31:29.746 Registry: Cannot read registry key value "Debug"
07/29/2007 02:31:29.762 Copy Engine: Installed file: C:Program FilesMicrosoft SQL Server90Setup BootstrapCacheSQLSupportx861033SqlSupport.msi
07/29/2007 02:31:29.762 Installed target: DB1
07/29/2007 02:31:30.027 Installed instance: Setup Support Files
07/29/2007 02:31:30.043 Installed product: Redist9
07/29/2007 02:31:30.043 Installing product: SQL9
07/29/2007 02:31:30.043 Installing instance: MSSQLSERVER
07/29/2007 02:31:30.059 Enumerating passive cluster nodes
07/29/2007 02:31:30.574 Patching available passive node: DB2
07/29/2007 02:31:30.574 Patching passive node: DB2
07/29/2007 02:31:30.590 Waiting for first completed passive node
07/29/2007 02:31:30.934 Task Scheduler: Created remote folder for product instance target \DB2
07/29/2007 02:31:49.387 Task Scheduler: Transferred payload to remote product instance target \DB2
07/29/2007 02:31:49.402 Task Scheduler: Transferred payload to remote product instance target \DB2
07/29/2007 02:31:49.574 Task Scheduler: Error, cannot create scheduled task for product instance target \DB2
07/29/2007 02:31:50.449 Task Scheduler: Removed remote folder for product instance target \DB2
07/29/2007 02:31:50.449 Error, remote process failed for product instance target
07/29/2007 02:31:50.449 Exit code for passive node: DB2 = 1603
07/29/2007 02:31:50.590 The following exception occurred: No passive nodes were successfully patched Date: 07/29/2007 02:31:50.590 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllinstance.cpp Line: 3422
07/29/2007 02:31:51.449 Watson: Param1 = Unknown
07/29/2007 02:31:51.465 Watson: Param2 = 0x2b01
07/29/2007 02:31:51.465 Watson: Param3 = Unknown
07/29/2007 02:31:51.465 Watson: Param4 = 0x0
07/29/2007 02:31:51.465 Watson: Param5 = instance.cpp@3422
07/29/2007 02:31:51.465 Watson: Param6 = Unknown
07/29/2007 02:31:51.480 Watson: Param7 = SQL9
07/29/2007 02:31:51.480 Watson: Param8 = Hotfix@
07/29/2007 02:31:51.480 Watson: Param9 = x86
07/29/2007 02:31:51.480 Watson: Param10 = 3042
07/29/2007 02:31:51.480 Installed product: SQL9
07/29/2007 02:31:51.480 Installing product: DTS9
07/29/2007 02:31:51.496 Installing instance: Integration Services
07/29/2007 02:31:51.496 Installing target: DB1
07/29/2007 02:31:51.512 Installing file: sqlrun_dts.msp
07/29/2007 02:31:51.512 Copy Engine: Creating MSP install log file at: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log
...
View 5 Replies
View Related
Jan 22, 2008
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
View 4 Replies
View Related
Jun 5, 2006
I
am trying to install SQL 2005 in a 2-node virtual Windows 2003 cluster. I set
the cluster up through Virtual Server 2005 with 2 virtual nodes and one
virtual domain. The nodes can connect to each other as well as the
physical machine. When I try to install a fresh copy of SQL 2005 on my
cluster, I get an error every time. The
error stops the installation while checking system configuration after
installing prerequisites. The log file entry is as follows:
*******************************************
Setup Consistency Check Report for Machine: --SERVERNAME--
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: Warning
Description:
IIS is not installed, therefore Report Server feature will be disabled
Action: Install IIS in order for Report Server feature to be enabled
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
1
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache
Source File Name: datastoreclusterinfocollector.cpp
Compiler Timestamp: Fri Sep 16 13:20:12 2005
Function Name: ClusterInfoCollector::collectClusterVSInfo
Source Line Number: 883
----------------------------------------------------------
Failed to detect VS info due to datastore exception.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
----------------------------------------------------------
Failed to find a cluster group that owned shared disk: J:
WinException : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
View 3 Replies
View Related
May 15, 2008
Friends -
Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.
My environment is Windows 2003 server.
Appreciate your support.
Cheers
VSH
View 1 Replies
View Related
Dec 10, 2007
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16
System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195
System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95
System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105
System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Control.InitRecursive(Control namingContainer) +198
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 3 Replies
View Related
Jan 24, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
View 2 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 1 Replies
View Related
Apr 15, 2008
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this
I use Microsoft Windows Vista Home Professional
I have already installed to my computer Microsoft SQL Server 2005 and SQL Serves Express. I used to be successful to connect to the SQL Server but now I CAN NOT.
Not: I try to run SQL Server 2005 but I can not, even I logged on to my computer with an administrator rights. On the other hand I can start and stop the SQL Server Express easily.
As a result, how can I solve this problem.
Thanks in advance.
Bilgin Kılıç
Additional Details
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 5 Replies
View Related
Mar 2, 2008
My environment:
Home PC
Vista Ultimate
SQL Server Developer 2005
I'm about to go absolutely nuts. I've tried so many things including:
1) Of course making sure Remote connections and both TCP/IP and named pipes are enabled for SQL 2005
2) Verified my connection string works. I even tested it in Enterprise Library using the tool and it connects successfully via windows authentication
3) Made sure of course my logged in user is a member of the administrator group and that my user in SQL 2005 logins has db_owner and full rights to the DB I am connecting to. I also made sure the NT AUTHORITY as well as the 3 sql service users have db_owner rights as well as the adminstrator in the SQL Server logins all have db_owner to the DB
4) Started the SQL Server Browser service, SQL Server DB engine, and SQL Server Agent
5) Made sure my site is setup right in IIS 7. I checked the connection string in there as well as it shows up in IIS7 in one of the sections. Using Windows authentication and it is enabled for my site
6) Tried running the .net site using both localhost (IIS) and also tried using the Visual Studio built-in web server. Both give this message still
Error Details:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +79
[HttpException (0x80004005): Unable to connect to SQL Server session database.]
System.Web.SessionState.SqlSessionStateStore.ThrowSqlConnectionException(SqlConnection conn, Exception e) +227
System.Web.SessionState.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo) +349
System.Web.SessionState.SqlSessionStateStore.GetConnection(String id, Boolean& usePooling) +285
System.Web.SessionState.SqlSessionStateStore.SetAndReleaseItemExclusive(HttpContext context, String id, SessionStateStoreData item, Object lockId, Boolean newItem) +178
System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) +476
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
View 9 Replies
View Related
Jan 22, 2008
When my default.aspx page loads I get this error for the connection to my SQL 2005 DB. An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) I have already gone to Surface Area Configuration to ensure that Remoting with both Named Pipes or TCP/IP is enabled and it's set to both for remoting.I verified that my local account has access to the DB.Not sure what else to check.
View 8 Replies
View Related
Aug 17, 2007
Hi.
I have installed an SQL 2005 Failover Cluster on a Two Node Active Passive Windows 2003 Cluster.If i am trying to failover from the Active node to the passive Node,The Sql Server,Sql Server Agent and SQL Analysis resources fail,However if i reset the passowrd in the services tab of the above three services on the pasive node,the resources come online.
Below is the brief of my setup
1.I have two Active directory domain controllers running Windows 2003 R2 Standard edition with SP2.
2.i have installed a Windows 2003 Two Node Active Passive Cluster as NODE1 and NODE2.
3.The Domain account used to install WIndows 2003 A/P Cluster is Clusteradmin.This account is the member of Administartors on the Domain as well as the Local Admin on NODE1 and NODE2.
4.SQL 2005 with SP2 is installed on both the Nodes as SQL 2005 Failover Cluster.The account used to install SQL 2005 is sqadmin.This account is the member of Administartors on the domain and the member of Local Admins on NODE1 and NODE2.
5.SLQ 2005 has four domain groups for 4 SQL Services.The Services are SQL Server,SQL Server Agent,SLQ Anaylisis Server and Full text Search.
6.Each of these servcie has a seperate service account created for them.All these service accounts areb the members of domain admin and the member of Local Admin on NODE1 and NODE2.
7.Each of these servcies is running under these servcie accounts in the Servcies tab in NODE1 and NODE2.
8.If i fail the resources from NODE1 to NODE2 ,The SQL Server,SQL Server Agent and SQL Anaylisis resources are failing.on going to the service tab of NODE 2 I reset the password for these services,the services come online.
10.The Cluster resources and MSDTC Resources are Failing over successfully.They are coming online successfully.
11,I have a problem with the SQL Server Resources,even if i failback to NODE1 from NODE2,the same resources are failing again.
Plz Advice.
Regards
Khalid
View 1 Replies
View Related
May 4, 2007
Hi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
View 3 Replies
View Related
Apr 18, 2007
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
View 1 Replies
View Related
Dec 28, 2005
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?
View 10 Replies
View Related
Jun 7, 2007
The OLEDB linked server was working under SQL Server 2005 SP1. After installing SP2 the following error occurs:
OLE DB provider 'EDAOLEDB.1' cannot be used for distributed queries because the provider is configured to run in single-threaded apartment mode. (Microsoft SQL Server, Error: 7308)
Does anyone know how to fix this?
View 1 Replies
View Related
Apr 20, 2006
Can multiple SQL instances (sql server 2000 and sql server 2005) be clustered in an active/active environment?
Thank you.
View 7 Replies
View Related
Jun 29, 2006
with the following log:
Microsoft SQL Server 2005 Setup beginning at Wed Jun 28 19:02:06 2006
Process ID : 1220
E:Serverssetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2006/5/28 19:2:5
Complete: LoadResourcesAction at: 2006/5/28 19:2:5, returned true
Running: ParseBootstrapOptionsAction at: 2006/5/28 19:2:5
Loaded DLL:E:Serversxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2006/5/28 19:2:6, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Mon Jun 13 14:30:00 2005
Function Name: sqls::CryptSameUserSameMachine::ProtectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "1220"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2006/5/28 19:2:6
Complete: ValidateWinNTAction at: 2006/5/28 19:2:6, returned true
Running: ValidateMinOSAction at: 2006/5/28 19:2:6
Complete: ValidateMinOSAction at: 2006/5/28 19:2:6, returned true
Running: PerformSCCAction at: 2006/5/28 19:2:6
Complete: PerformSCCAction at: 2006/5/28 19:2:6, returned true
Running: ActivateLoggingAction at: 2006/5/28 19:2:6
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00D9CFC4Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "1220"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
View 2 Replies
View Related
May 23, 2006
I have an Integration Services package running fine when i execute it manually.
However, when i schedule the package in SQL Server Agent.
it fails to execute.
The only message i get "package execution failed. the step failed"
i changed the job owner to local administrator's account and the sa login but it still failed.
View 2 Replies
View Related
Nov 30, 2006
My upgrade to SP1 for SQL Server 2005 failed and I have yet to find a reason or a solution. I have read many articles describing file security problems, registry problems etc. I have been through these and looked at all of the different aspects and still cannot find a fix other than to unistall SQL and reinstall SQL. Since this is a production server and is used 24/7 I would rather avoid this. The installation is on a windows 2003 server with SP1 that was upgraded from Windows 2000. SQL was originally installed fresh on 2000. There is 21GB of HD space left. Below is the last few lines from the SQL Log
Property(S): AdminUser = 1
Property(S): SystemLanguageID = 1033
Property(S): SQL200532Hotfix2047 = \PDC1c$14773e1faf9d288841d5552a40HotFixSQLFilessqlrun_sql.msp
Property(S): UPGRESDATABASES = 1
Property(S): SqlActionManaged = 3
Property(S): BrowseAuto.2FC2D269_8625_4826_BB3F_F9059090CB38 = 2
Property(S): UPGDISTDATABASES = 1
Property(S): InstallNgenTicks = 110000
Property(S): Sql_sqlSqlUpgradeSequence = 74948000
Property(S): HotfixScript = 1
Property(S): DebugClsid.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = {3044D882-D138-432F-9A13-A20ED7C33C23}
Property(S): SQLBROWSERACCOUNT = NT AUTHORITYSYSTEM
MSI (s) (64:EC) [15:37:54:500]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 1 for SQL Server Database Services 2005 ENU (KB913090)' could not be installed. Error code 1603. Additional information is available in the log file C:WINNTHotfixSQL9LogsSQL9_Hotfix_KB913090_sqlrun_sql.msp.log.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 1729
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Transforming table Error.
MSI (s) (64:EC) [15:37:54:515]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [15:37:54:515]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (64:EC) [15:37:54:531]: Attempting to delete file C:WINNTInstaller3438c.msp
MSI (s) (64:EC) [15:37:54:531]: Unable to delete the file. LastError = 32
MSI (s) (64:EC) [15:37:54:546]: Cleaning up uninstalled install packages, if any exist
MSI (s) (64:EC) [15:37:54:546]: MainEngineThread is returning 1603
MSI (s) (64:DC) [15:37:54:546]: Destroying RemoteAPI object.
MSI (s) (64:84) [15:37:54:546]: Custom Action Manager thread ending.
=== Logging stopped: 11/27/2006 15:37:54 ===
MSI (c) (EC:2C) [15:37:54:656]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (EC:2C) [15:37:54:656]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/27/2006 15:37:54 ===
View 9 Replies
View Related
Aug 30, 2006
I'm trying to link SQL Server 2000 sp3 to SQL 2005 64 bit. I keep getting Error 17 sql server does not exist or access denined. I tried adding remote user mapping and chaning the linked server properties to "Be made using this security context" without any success.
Any help is appreciated.
View 4 Replies
View Related
Aug 27, 2007
I receive the following error message when I run a distributed query against a loopback linked server in SQL Server 2005:
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
To resolve this problem, I was told that running a distributed query against a loopback linked server is not supported in SQL Server 2005. And I am suggested to use a remote server definition (sp_addserver) instead of a linked server definition to resolve this problem. (Although this is only a temporary resolution, which will deprecate in Katmai)
However, I run into another problem when I use the remote server definition. I receive the following error message:
Msg 18483, Level 14, State 1, Line 1
Could not connect to server 'ServerNameSQL2005' because '' is not defined as a remote login at the server. Verify that you have specified the correct login name.
Could anyone please help me out?
(I include the reproduce steps for the first error message, followed by my resolution that generates the second error message)
======
Reproduce steps for the first error message
======
On the ComputerAInstanceA instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseA
GO
USE DatabaseA
GO
CREATE TABLE TestTable(Col1 int, Col2 varchar(50))
GO
INSERT INTO TestTable VALUES (1, 'Hello World')
GO
On the ComputerBInstanceB instance, run the following statement to create a database and a table:
CREATE DATABASE DatabaseB
GO
USE DatabaseB
GO
CREATE TABLE TestTable (Col1 int, Col2 varchar(50))
GO
On the ComputerAInstanceA instance, create a linked server that links to the ComputerBInstanceB instance. Assume the name of the linked server is LNK_ServerB.
On the ComputerBInstanceB instance, create a linked server that links to the ComputerAInstanceA instance. Assume the name of the linked server is LNK_ServerA.
On the ComputerBInstanceB instance, run the following statement:
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * from LNK_ServerA.DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXEC LNK_ServerB.DatabaseB.dbo.InsertA
GO
Then I receive the first error message.
=======
My resolution that generates the second error message
=======
On the ComputerBInstanceB instance, run the following statement:
sp_addserver 'ComputerAInstanceA'
GO
sp_serveroption 'ComputerAInstanceA', 'Data Access', 'TRUE'
GO
USE DatabaseB
GO
CREATE PROCEDURE InsertA AS
BEGIN
SELECT * FROM [ComputerAInstanceA].DatabaseA.dbo.TestTable
END
GO
On the ComputerAInstanceA instance, run the following statement:
USE DatabaseA
GO
INSERT INTO TestTable
EXECUTE [ComputerBInstanceB].[DatabaseB].[dbo].[InsertA]
GO
Then I receive the second error message.
View 1 Replies
View Related
