I would like to create a MSAccess97 front end for some SQL7 data.
I created an odbc source system dsn for the server holding the SQL7 data.
When I try to add a table to my Access97 database by linking it to a SQL7 table, the only choices presented me are tables in the default database for SQL7 on my server. How do I link to tables in another database on that server? Thanks.
I`m trying out SQLServer7, have installed it on my workstation, have been able to open access97 and link to sql7 tables I created. Want another user to use access97 to set up her own database and link to my sql7 tables. Do I need to install anything from the sql7 beta disk on her desktop? Right now she can`t link a sql7 table to her access97 db. Thanks.
View 1 Replies View RelatedI am trying to link a table from a MS SQL database into access97 thru ODBC. When I do this, I get the message "Can't define field more than once." When I look at the table in SQL, there are no duplicate field names, however, when I bring the table in to do a Crystal Report, I see there are 2 fields that have duplicate field names 6 times. (Evidently Crystal doesn't care about this as Access does.) Any clues on what is happening?
View 2 Replies View RelatedWhen I try to link tables from Access97 to SQL7, all the columns have #deleted# in them. Does any one know why this is?
Thanks
Phil
When Access date/time data is transformed to SQL7, it seems to work fine as long as the data contains date information. But, if the data is time only, there is the 2-day diff. coming out of Access.
For date/time data in Access, day 0 is 12/30/1899--for SQL7 it is 1/1/1900.
So, it appears that DTS first converts Access date/time data to a date formatted string and then sends to SQL. This will only be a problem for times....8:00 AM is stored to SQL as 8:00 AM on 12/30/1899, not 1/1/1900. If I try to calculate hours or minutes from midnight (date/time 0) I get a negative number.
Has anyone else encountered this? I guess my choice is to modify DTS to correct for the dates or to run an update once the data is moved.
i have tried linking all my aspx scripts with ms access, they all worked,now i have switched on to ms sql7...iam not familier with the codes used for sql...my main problem is the data source syntax...in case of access i had given the file address along with extension...eg: C:DataNortwind.mdb...so what should i do in case of sql... i have also given my code below
sub Page_load(sender as object, E as eventargs)
dim objconnection As sqlconnection
dim objcommand as sqlCommand
dim objadapter as sqlDataAdapter
dim objdata As DataSet
dim strsearch as String
dim sqlquery as String
strsearch = tb1.text
if Len(trim(strSearch))>0 then
objConnection = new sqlconnection("Data Source=(localhost);")
sqlquery= "select * from mayank where (name"&strsearch.ToString()&")"
objcommand = new sqlcommand(sqlquery, objconnection)
objadapter = new sqlDataAdapter(objcommand)
objdata = new DataSet()
objadapter.Fill(objdata)
DataGrid1.DataSource = objdata
DataGrid1.DataBind()
objConnection.close
Else
tb1.text= "enter your search here"
end if
end sub
i have 6 table in SQL Server and i have created one view and create single table by linking all the table,now i want to join two column like
Column A and Column B = Column C
e.g
A B C
Atul Jadhav Atuljadhav
Vijay vijayvijay
in above exambe column A having firstName and Column B having second name and i want to join this two column in C column "atuljadhav" and if column B is blank then it join A value tow timestriger code as it is auto update column and every time (update, append, modify, delete) it should be update automatic
I have several pdf files that need to be imported into the database. Each pdf file is to link to several rows in a database.
The files have different file names and keep coming every week. I need to import them into a table and link it with the data table. Need help on how to get the filename out of the pdf file and save it on the table with the image. I can use that filename as the foriegn key..Any help would be really great..
-Sri
Little puzzle this.I need to link from SQL2000 to Access to get to a table held within anAccess DB. Now you can link within Access to a SQL table, but can thisbe done the other way round ? It's the first time I've needed to dosomething like this.What I have is an application which was written (by me) with an Accessbackend (to run on a CD) and now it needs to run on SQL. However, Iwant to be able to swap over between backends so that I can choosewhere this runs from. I've done this with the sole exception of onetable. Previously most of the data was held in one MDB file and a linkto another (one local copy and one on CD). My queries use the link toquery both local and the CD copy data together.I can re-write things if I need to, but I was curious about there beinga way of doing this. What I want in effect is to query a view on SQL,but the data will be held in Access instead of on SQL.I suppose I can import as I need it as the data is purely read only. Idon't think this can be done, but wanted to check first. I can alwaysmove the remainder of the data over to SQL if needed. It's not a bigproblem, just something I'm curious about.Any pointers would be appreciated.Thanks in advanceRyanp.s. In case anyone wonders why I have taken this approach it isbecause we have a query tool and data that we send out to clients onCD. Some now want this web based, so I will publish the application ona Citrix server, and by changing a config file can swap within theapplication to point to SQL (by changing the ODBC settings). This way,I only need one copy of the application and can change backends as Ineed to.
View 2 Replies View RelatedCan someone help me with how I should set the relationship in my address tables and how they will affect the deleting of a client?
So, if I have:
tblClients ClientID
tblClientAddresses AddressID
tblClientAddressLinks AddressID, ClientID
Currently I have them set as a 1-M from tblClients to tblClientAddressLinks and a 1-M from tblClientAddresses to tblClientAddressLinks
If I try and delete a client and there address is shared wont this go very wrong?
So here is what happens when I try and delete a client:
The DELETE statement conflicted with the REFERENCE constraint "FK_tblClientAddressLinks_tblClients". The conflict occurred in database "DBSQL2", table "dbo.tblcLIENTAddressLinks", column 'clientID'.The statement has been terminated.
Here is what happens when I try and delete an address:
The DELETE statement conflicted with the REFERENCE constraint "FK_tblClientAddressLinks_tblClientAddresses". The conflict occurred in database "DBSQL2", table "dbo.tblClientAddressLinks", column 'Address_ID'.The statement has been terminated.
I would like to hear your thoughts on a philosophy I adhere to.
As a rule of thumb I've always preached that Unique Indexes are for linking tables and Primary Keys are used to ensure that records aren't duplicated. I’ve embraced this philosophy for a couple reasons, the main one being that I don’t have to create numerous foreign key fields in the foreign key table.
However I’ve done most of my programming in Access and am now in need of something more robust (SQL Server v7) and I’m wondering if I need to reconsider.
I do also have a how to question; that being is it possible to create a table join on a unique index in SQL Server v7 and if so how? I would like to have an Auto Number / Auto Incremented / Unique Identifier field in the Primary Key table that links to a numeric field in the Foreign Key table.
Thanks in advance
Dog
Rather than using the upsize wizard in MS Access to connect to tables on a backend SQL server, how would I go about linking an Access Database to an existing table on an SQL server?
Thanks, Phil
I'm having problems seeing the correct data type when linking my Access tables to MS SQL Server 2005. My varchar(max) fields are showing as text(255). I'm using the SQL Native Client.Has anyone else ssen this issue?
View 3 Replies View RelatedHi,
Something strange has happened to my table. I used Enterprise Manager today to delete 3 columns. When I went to re-link the table using Access Linked Table Manager, it gave me an error. I then deleted the link to the table, and tried to Link it again using 'Get External Data---Link Tables'. I am getting an error (no surprise!):
" 'dbo.tblSpaceUse.PK_RoomID' is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long".
When I go into Enterprise Manager to 'manage Indexes' on the table, it shows me that the existing index is in fact dbo.tblSpaceUse.PK_RoomID.
About a month ago, I had to rename the index, because it had been pointing to the wrong table. The SQL I used to rename it (in Query Analyzer) is:
EXEC sp_rename 'dbo.tblSpaceUse.PK_RoomID', 'tblSpaceUse.PK_RoomID', 'INDEX'
I have been using the table successfully since then, until today. I have not done anything with the index; the only change I attempted was to delete 3 columns (not related to the index). I do not think I have made any changes to the table since I renamed the index.
I tried to run the rename SQL again (a desperate attempt!) and get the error message:
Server: Msg 15248, Level 11, State 1, Procedure sp_rename, Line 192
Either the parameter @objname is ambiguous or the claimed @objtype (INDEX) is wrong.
Any ideas on what went wrong and what I can do to fix it???
Thanks,
Lori
I am using SQL 2008 r2. I have two SQL Queries from 2 different database but they share one server. I need to linked these two SQL Queries as they share the same Primary key which CustomerID see example below
Query 1
Database::Student
Select StudentID , FName, LName
From Student
Query 2
Database ::Finance
Select StudentID,Tution
FROM Payment
I need to be able combine two query which come from two database but they share one server.I would like to use two temp tables so that I can perform a left / right join to retrieve the data by linking two queries using primary id which they both share ( StudentID)
Summary : I have two DB's on the same server. I have two simple select queries for each DB which work correctly.
I have a table 'Group2Operation' that stores many to many relationsbetween the 'Group' table and the 'Operation' table (each group is haspermission to perform one or more of the available operations)PROBLEM=======I need to prevent duplicate entries being created. e.g. lets say thatin the 'Group2Operation' table a record links the 'editor' group tothe 'publish' operation. Should I prevent an administrator creating aduplicate of that record? (Otherwise deleting that permission willhave to be done twice or more for it to be effective)SOLUTION?=========So far I've done this with a trigger:CREATE TRIGGER Group2OperationDuplicates ON dbo.Group2OperationFOR INSERT, UPDATEAS UPDATE Group2OperationSET NoDuplicate = CONVERT(nvarchar(10),GroupID) + OperationTagThe 'NoDuplicate' unique index column in the Group2Operation tablestores a concatenation of the unique group and operation identifiers.So when an attempt is made to create a record, the trigger is fired.If there is a duplicate, this will mean a duplicate entry in the'NoDuplicate' column. As a result, the INSERT or UPDATE will fail andthe duplication will be prevented.WHAT DO YOU THINK?==================What do you think? Am I going about this in the right way? Is atrigger a good way to do this or should I rely on application logic toprevent duplicates?Any help appreciated by this db novice.John Grist
View 2 Replies View Related
Hi there,
I just upsized my access database which has several tables and query linked to one of the tables residing on a seperate access database. When I do add in the diagram section, I see only table, then my question how would I be able to do the same thing under SQL Server 2005? thank you
After Upsizing a table to sql I linked to that table using access db
Now when i use one of my forms i get a [Invalid Object name "tablename''], not sure why but i am clearly link and the table is in sql!
Can you help!
Hi folks,
on one of my SQL7.0 Servers I sometimes encounter the following message in the errorlog:
Table Corrupt: Object ID 0, index ID 0, page ID (1:999816). The PageId in the page header = (0:0).
It seems to me that this message is put for each db that is delt with in the maintenance plan, because it is the same number (16 times in my case)
It occurs during the index reorganisation phase of my maintenance plan. Before this happens there is a DBCC checkdb and DBCC newalloc on several DBs with no errors.
Anything I have to check or to fix, or can I ignore such zero-messages?
Thank you in advance
Karsten
I have an assignment where I am to create two tables within a database. One of the tables have the name ContactPerson with the attributes; ID, Forename, Surname, Email, PhoneNumber. The other table is called Company and has the attributes: ID, CompanyName.
Now my problem is that I have to link a ContactPerson to a specific company, but I can't have them in the same table.
I understand that I can use the join statement to show both tables in one query but I need the database to know which person is linked to which company when I implement this databse into my asp.net project.
How do I do this?
Can you please advise on how to copy tables from DB1 to DB2 on the same SQL 7 Server. The programer had me drop the tables from DB2 and wants me to copy the tables from DB1 to DB2.
Thanks for any help.
I have transaction table where the rows entered into the transactioncan come a result of changes that take place if four different tables.So the situation is as follows:Transaction Table-TranId-Calc AmountTable 1 (the amount is inserted into the transaction table)- Tb1Id- Tb1AmtTable 2 (an amount is calculated based on the percentage and insertedinto the transaction table)-Tbl2Id-Tb2PercentageTable 3 (the amount is inserted into the transaction table)-Tbl3Id-Tbl3AmutTable 4 (an amount is calculated based on the percentage and insertedinto the transaction table. )-Tbl2Id-Tb2PercentageHow do I create referential integrity between the Transaction table andthe rest of the tables. When I make changes to the values in Table 1 -4, I need to be able to reflect this in the Transaction table.Thanks.
View 6 Replies View RelatedI am modelling two fact tables of Actuals and Budget which are at different granularity, Actuals are at day, customer and product sub category level. Budgets are at month, Region and Product category level.
Month, Region and Product Category is present in Date, Region and Product Category dimension respectively. I have only three dimensions as Customer, Product and Date. Linking those dimensions to Actual Fact table is not an issue, what is the best way and options are there to link budget fact table to those three dimensions.
I have migrated a database from Access to SQL. Promlem is that I cannot edit the records in the now
linked tables. We are still using the Access front end. Why can't we edit the records?
Thanks in advance.
Hi. Silly question time please.
I'm a newbie when it comes to SQL7.
I'm trying to connect via Access 97 VBA to a SQL server table. I can't seem to get it working at a basic level.
Has anyone got the basic syntax or sample piece of VBA code to connect to a SQL server. I've been searching everywhere to no avail so far.
Dave.
If i create ODBC links for a SQL server db in Access and make the file read-only, i find that 2 people cannot open teh file simultaneously...
any ideas why and any suggestions how to over come thi problem...any solutions will be highly appreciated
regards,
resh
I have an Access 97 database that I would like to "mirror" in my SQL server 2000 database.
Basically I would like SQL server to keep a current copy of an Access 97 database table which exists on remote machine on our network. Any time there is a change made to the Access table, I would like the SQL server to be updated automatically.
Is this something that is possible to do with replication/synchronization, or do I have to push the data up with another app?
Thanks
Hi can anyone help me with the format of my stored procedure below.
I have two tables (Publication and PublicationAuthors). PublicaitonAuthors is the linking table containing foreign keys PublicaitonID and AuthorID. Seeming as one Publication can have many authors associated with it, i need the stored procedure to create the a single row in the publication table and then recognise that multiple authors need to be inserted into the linking table for that single PublicationID. For this i have a listbox with multiple selection =true.
At the moment with the storedprocedure below it is creating two rows in PublicaitonID, and then inserting two rows into PublicationAuthors with only the first selected Author from the listbox??? Can anyone help???ALTER PROCEDURE dbo.StoredProcedureTest2
@publicationID Int=null,@typeID smallint=null,
@title nvarchar(MAX)=null,@authorID smallint=null
AS
BEGIN TRANSACTION
SET NOCOUNT ON
DECLARE @ERROR Int
--Create a new publication entry
INSERT INTO Publication (typeID, title)
VALUES (@typeID, @title)
--Obtain the ID of the created publication
SET @publicationID = @@IDENTITY
SET @ERROR = @@ERROR
--Create new entry in linking table PublicationAuthors
INSERT INTO PublicationAuthors (publicationID, authorID)
VALUES (@publicationID, @authorID)
SET @ERROR = @@ERROR
IF (@ERROR<>0)
ROLLBACK TRANSACTION
ELSE
COMMIT TRANSACTION
Hi can anyone help me with the format of my stored procedure below.
I have two tables (Publication and PublicationAuthors). PublicaitonAuthors is the linking table containing foreign keys PublicaitonID and AuthorID. Seeming as one Publication can have many authors associated with it, i need the stored procedure to create the a single row in the publication table and then recognise that multiple authors need to be inserted into the linking table for that single PublicationID. For this i have a listbox with multiple selection =true.
At the moment with the storedprocedure below it is creating two rows in PublicaitonID, and then inserting two rows into PublicationAuthors with only the first selected Author from the listbox??? Can anyone help???ALTER PROCEDURE dbo.StoredProcedureTest2
@publicationID Int=null,@typeID smallint=null,
@title nvarchar(MAX)=null,@authorID smallint=null
AS
BEGIN TRANSACTION
SET NOCOUNT ON
DECLARE @ERROR Int
--Create a new publication entry
INSERT INTO Publication (typeID, title)
VALUES (@typeID, @title)
--Obtain the ID of the created publication
SET @publicationID = @@IDENTITY
SET @ERROR = @@ERROR
--Create new entry in linking table PublicationAuthors
INSERT INTO PublicationAuthors (publicationID, authorID)
VALUES (@publicationID, @authorID)
SET @ERROR = @@ERROR
IF (@ERROR<>0)
ROLLBACK TRANSACTION
ELSE
COMMIT TRANSACTION
The website i'm building is using an access97 database. Actually the database isn't very big but i hope it will become. So i would like to convert it to SQL 7.0 which seems to be more powerfull. Is there a software which can do it automatically? What are the modifications needed by ODBC ?
Thanks !
We have an Access97 database with 122 tables. I try to use import and export wizard to import the data from access into SQL 2005 database. I find an interesting problem. When select all tables, the wizard give following errors:
Pre-execute (Error)
Messages
Error 0xc0202009: {DBD1EAB5-7865-4B89-A7BB-DDC8507D8119}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 64 - PlanClasses" (5206) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard)
But if I divide importing as 2 steps:
1. import all tables before PlanClasses, it works.
2. import all tables after PlanClasses including PlanClasses, it works.
If I just import PlanClasses itself, it works, but I can not import all tables at once. Interesting thing is if I just unselect PlanClasses, it will have same error at the class right after PlanClasses. Is there size limitation when doing import at once?
Does Access2000 upsizing wizard support migration of tables to Sql 2000?
View 1 Replies View RelatedGreetings!
I recently rewrote an old ACCESS 97 application to work with MSSQL 7.
The program works fine until I use a form whiche opens several linked tables at the same time. When closing the Form I get (At unpredictable moments) an ODBC SQL SERVER DRIVER update failure error message.
All rights are set on the tables for Public and even then i keep getting this error at very odd moments. I also had a look in Access at the ODBC refresh rate which is set at 10sec , OLEDB refreshrate 10 sec, and refresh is set at 5sec.
I tried different combinations of timeout settings and even renewing the MDAC to version 2.7.
Nothing helps.
Can anyone give me a tip as to look for the possible source of the error and how to fix it?
Thanks!
Vincent JS