I have writted a dozen or so functions in the Code window of the Report Properties window. I have been copying them from report to report but now I'd like to put them into one assembly and link that to Report Server so they can be more easily maintained. I have ZERO experience with .net. I'm not sure what an assembly is or what it does.
Is there a step-by-step procedure for dummies?
Thanks.
I'm watching a webcast on CLR functions/procs and have a question:
If I create an assembly for my database using some .dll, is that .dll now locked by SQL Server?
I'm concerned of a situation where developer says the assembly code is bad. Developer presents new version of .dll .
- Will I get "Access denied, file is in use" when I try to replace the .dll ? Even if the assembly is used in a derived table column?
Thanks.
OK. I created a few functions in a Public Class called SSRSFunctions. I built it and deployed it to my desktop. What do I do now? Can it be included as standard functions in the function list within SSRS? Do I add a reference to the Class at the solution level? At the report level? If all I do is add a reference at the report level, I may as well add the functions to each report's code window, which is what I have been doing. I'd at least like to add a single reference to my solution if I can't get it added to the function list.
Thanks!
Hi,
I'm trying to develop a custom conflict resolver and I get the following message:
Error loading custom class "HQ.MemberHandler" from custom assembly "C:shareConflictHandler.dll", Error : "Could not load type 'HQ.MemberHandler' from assembly 'ConflictHandler, Version=1.0.0.0, Culture=neutral, PublicKeyToken=42ba9b913dccf3a9'."."
The resolver is register in the GAC.
I checked with sp_enumcustomresolvers that it is register in SQL.
The sync is working fine if I'm not using the resolver.
Here's the code of the resolver:
Imports System
Imports System.Text
Imports System.Data
Imports System.Data.Common
Imports Microsoft.SqlServer.Replication.BusinessLogicSupport
Namespace HQ
Public Class MemberHandler
Inherits BusinessLogicModule
' Variables to hold server names.
Private publisherName As String
Private subscriberName As String
' Implement the Initialize method to get publication
' and subscription information.
Public Overrides Sub Initialize( _
ByVal publisher As String, _
ByVal subscriber As String, _
ByVal distributor As String, _
ByVal publisherDB As String, _
ByVal subscriberDB As String, _
ByVal articleName As String _
)
' Set the Publisher and Subscriber names.
publisherName = publisher
subscriberName = subscriber
End Sub
' Declare what types of row changes, conflicts, or errors to handle.
Public Overrides ReadOnly Property HandledChangeStates() As ChangeStates
Get
' Handle Subscriber inserts, updates and deletes.
Return (ChangeStates.SubscriberInserts Or _
ChangeStates.SubscriberUpdates Or ChangeStates.SubscriberDeletes)
End Get
End Property
Public Overrides Function InsertHandler(ByVal insertSource As SourceIdentifier, _
ByVal insertedDataSet As DataSet, ByRef customDataSet As DataSet, _
ByRef historyLogLevel As Integer, ByRef historyLogMessage As String) _
As ActionOnDataChange
If insertSource = SourceIdentifier.SourceIsSubscriber Then
' Build a line item in the audit message to log the Subscriber insert.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("A new member was entered at {0}. " + _
"The ID for the member is :", subscriberName))
AuditMessage.Append(insertedDataSet.Tables(0).Rows(0)("memb_seq").ToString())
AuditMessage.Append("Member Name :")
AuditMessage.Append(insertedDataSet.Tables(0).Rows(0)("memb_pnom").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the inserted data in the Subscriber's data set and
' apply it to the Publisher.
Return ActionOnDataChange.AcceptData
Else
Return MyBase.InsertHandler(insertSource, insertedDataSet, customDataSet, _
historyLogLevel, historyLogMessage)
End If
End Function
Public Overrides Function UpdateHandler(ByVal updateSource As SourceIdentifier, _
ByVal updatedDataSet As DataSet, ByRef customDataSet As DataSet, _
ByRef historyLogLevel As Integer, ByRef historyLogMessage As String) _
As ActionOnDataChange
If updateSource = SourceIdentifier.SourceIsPublisher Then
' Build a line item in the audit message to log the Subscriber update.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("An existing member was updated at {0}. " + _
"The ID for the member is ", subscriberName))
AuditMessage.Append(updatedDataSet.Tables(0).Rows(0)("memb_seq").ToString())
AuditMessage.Append("Member Name :")
AuditMessage.Append(updatedDataSet.Tables(0).Rows(0)("memb_nom").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the updated data in the Subscriber's data set and apply it to the Publisher.
Return ActionOnDataChange.AcceptData
Else
Return MyBase.UpdateHandler(updateSource, updatedDataSet, _
customDataSet, historyLogLevel, historyLogMessage)
End If
End Function
Public Overrides Function DeleteHandler(ByVal deleteSource As SourceIdentifier, _
ByVal deletedDataSet As DataSet, ByRef historyLogLevel As Integer, _
ByRef historyLogMessage As String) As ActionOnDataDelete
If deleteSource = SourceIdentifier.SourceIsSubscriber Then
' Build a line item in the audit message to log the Subscriber deletes.
' Note that the rowguid is the only information that is
' available in the dataset.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("An existing member was deleted at {0}. " + _
"The rowguid for the member is ", subscriberName))
AuditMessage.Append(deletedDataSet.Tables(0).Rows(0)("rowguid").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the delete and apply it to the Publisher.
Return ActionOnDataDelete.AcceptDelete
Else
Return MyBase.DeleteHandler(deleteSource, deletedDataSet, _
historyLogLevel, historyLogMessage)
End If
End Function
End Class
End Namespace
Here's the SQL query to register the resolver:
DECLARE @publication AS sysname;
DECLARE @article AS sysname;
DECLARE @friendlyname AS sysname;
DECLARE @assembly AS nvarchar(500);
DECLARE @class AS sysname;
SET @publication = N'memb';
SET @article = N'memb';
SET @friendlyname = N'TestConlictResolver';
SET @assembly = N'C:shareConflictHandler.dll';
SET @class = N'HQ.MemberHandler';
-- Register the business logic handler at the Distributor.
EXEC sys.sp_registercustomresolver
@article_resolver = @friendlyname,
@resolver_clsid = NULL,
@is_dotnet_assembly = N'true',
@dotnet_assembly_name = @assembly,
@dotnet_class_name = @class;
-- Add an article that uses the business logic handler
-- at the Publisher.
EXEC sp_changemergearticle
@publication = @publication,
@article = @article,
@property = N'article_resolver',
@value = @friendlyname,
@force_invalidate_snapshot = 0,
@force_reinit_subscription = 0;
GO
Any clues??
Thanks
I have been reading up on everything I can find on this subject and I am not clear if this is allowed within the SQL Server 2005 CLR. My function calls work within a Windows form project, but don't run when invoked from a SQL function. I don't get any errors or warnings when creating the assembly and functions within SQL Server, but when running via a select statement, the spid just hangs and I have to stop & restart the service to kill the process. I have been investigating the security settings for this assembly, but I think I have that covered via the RunTime Security Policy settings in the .NET Framework 2.0 Configuration tool.
Any insights, knowledge, or thoughts would be greatly appreciated.
Barry
I'm trying to make a reusable header function. In it, there is the report name and a couple other bits of info. The problem is making RS use the real report name
If I return "Globals!ReportName" in an assembly function, then call that function, I get that exact text - but what I really want is the report name. I understand what it's doing, but how to I trick it:
Is there some way to make RS aware of the fact that this is meant to be seen as something it needs to evaluate rather than just displaying the actual text?
I work with February CTP of SqlServer 2008.
I have an Assembly with several UDTs inside. Version of assembly is 1.0.*
I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version).
Then I try to update assembly in SqlServer. I use
ALTER ASSEMBLY <name>
FROM <path>
WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA
statement for this. Statement runs with error:
Msg 6509An error occurred while gathering metadata from assembly €˜<Assembly name>€™ with HRESULT 0x1.
I found the list of condition for ALTER ASSEMBLY in MSDN:
ALTER ASSEMBLY statement cannot be used to change the following:
· The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly.
· The signatures of methods in the assembly that are called from other assemblies.
· The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly.
· The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly.
· The FillRow method name attribute for CLR table-valued functions.
· The Accumulate and Terminate method signature for user-defined aggregates.
· System assemblies.
· Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead.
Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes:
· Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed.
· Adding new public methods.
· Modifying private methods in any way.
But I haven€™t done any changes in source code, so new version of assembly satisfies all this conditions.
What could be the reason for such behavior?
P.S. I€™ve got the same error, if I add or change any method in assembly before rebuilding.
Hello there I have trying to figure out for days how to enable FullTrust for my Reporting Services security extension.
View 9 Replies View Related
I am trying to get a function I created in VB 5 for Access and Excel to work in SQL 2005. I was able to update the old VB code to work in VB 2005. I compiled and made a .dll, and I was able to register the new Assembly in SQL Server. When I try to create the Function, I get an error:
CREATE FUNCTION dbo.Temperature(@FluidName char, @InpCode Char, @Units Char, @Prop1 varchar, @Prop2 varChar)
RETURNS VarChar
AS EXTERNAL NAME FluidProps.[FluidProps.FluidProperties.Fluids].Temperature
Error returned:
Msg 6573, Level 16, State 1, Procedure Temperature, Line 21
Method, property or field 'Temperature' of class 'FluidProps.FluidProperties.Fluids' in assembly 'FluidProps' is not static.
Here is the code (part of it) in the VB class:
Header:
Imports Microsoft.SqlServer.Server
Imports System.Data.SqlClient
Imports System.Runtime.InteropServices
Imports System.Security
Imports System.Security.Permissions
Namespace FluidProperties
'Option Strict Off
'Option Explicit On
Public Partial Class Fluids
Function:
Function Temperature(ByRef FluidName As Object, ByRef InpCode As Object, ByRef Units As Object, ByRef Prop1 As Object, Optional ByRef Prop2 As Object = Nothing) As Object
Call CalcProp(FluidName, InpCode, Units, Prop1, Prop2)
Temperature = ConvertUnits("-T", Units, T, 0)
End Function
If I change the Function Temperature to Static, I get an error that functions cannot be Static. Its been a long time since I created the code and am having a hard time in my older age of getting the cobwebs out to make it work.
I have no problem getting the function to work if I call it from a VB form....so what do I need to do to get it to work on data in my SQL server?
Thanks
Buck
I previously had an ASP.NET 1.1 site running on my IIS 6.0 server (not the default website) with Reporting Services running in a subdirectory of that website. I recently upgraded to ASP.NET 2.0 for my website and was greeted with an error when trying to view a report. The error was very non-descript, but when I checked the server logs, it recorded the details as "It is not possible to run two different versions of ASP.NET in the same IIS process. Please use the IIS Administration Tool to reconfigure your server to run the application in a separate process."
First of all, I could not figure out where and how to do this. Secondly, I decided to try to also change the Reporting Services folders to run ASP.NET 2.0 and when I did, I was greeted with the following message when attempting to view a report:
"Failed to load expression host assembly. Details: StrongName cannot have an empty string for the assembly name."
Please help.
Hi
I am a bit paranoid about what I just did to my SQL Server 2005 with this CLR experiment.
I created a Class Lib in C# called inLineLib that has a class Queue which represents an object with an ID field.
in another separate namespace called inLineCLRsql, I created a class called test which will hold the function to be accessed from DB, I referenced and created an instances of the Queue class, and retrieve it's ID in a function called PrintMessage.
namespace inlineCLRsql{
public static class test{
public static void PrintMessage(){
inLineLib.Queue q = new inLineLib.Queue();
int i = q.queueId ;
Microsoft.SqlServer.Server.SqlContext.Pipe.Send(i.ToString());
}
}
}
to access this from the db, I attempted to create an assembley referencing inLineCLRsql.dll. This didn't work as it complained about inLineLib assembly not existing in the db. I then attempted to create an assembley for inLineLib but it barfed saying System.Management assembly not created.
so what I did is (and this is where I need to know if I just ruined sql server or not):
1- ALTER DATABASE myDB SET TRUSTWORTHY ON;.
2- CREATE ASSEMBLY SystemManagement
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Management.dll'
WITH PERMISSION_SET = UNSAFE
3- CREATE ASSEMBLY inLineLibMaster
FROM 'D:inLineServerinLineLibinDebuginLineLib.dll'
WITH PERMISSION_SET = unsafe
4- and finally
CREATE ASSEMBLY inLineLib
FROM 'D:inLineServerCLRSQLinlineCLRsqlinDebuginlineCLRsql.dll'
WITH PERMISSION_SET = SAFE
Everything works after those steps (which took some trial and error). I can create a sproc like:
CREATE PROC sp_test AS
EXTERNAL NAME inLineLib.[inlineCLRsql.test].PrintMessage
and it returns the Queue ID
Is there anything unadvisable about the steps above?
Thanks for your help
M
We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can€™t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.
CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.
I am trying to deploy a Database Project with Visual Studio 2005 and SQL Server 2005 Standard.
I import €œSystem.IO€? and have therefore set the permission levels to EXTERNAL_ACCESS.
I am receiving the same error message that many folks have received.
CREATE ASSEMBLY for assembly 'Images' failed because assembly 'Images' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.
The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. Images.
My CLR access is €œon€?
I have tried
1) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to [BuiltinAdministrators].
2) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to €œMy Windows Authentication ID€?.
3) Run ALTER DATABASE MYDATABASE SET TRUSTWORTHY ON
4) In Visual Studio .NET 2005 Set the permission levels to €˜external€™
5) Tried BuiltinAdministrators and my SQL Server Windows Authenticated Login ID for the ASSEMBLY OWNER.
I can compile BUT NOT DEPLOY
Any help would be greatly appreciated.
Regards Steve
I was trying to understand how VS.NET2005 was deploying .NET CLR assemblies to SQL2005 so I ran a trace and found some interesting results.
VS.NET creates some SQL that looks pretty interesting:
CREATE ASSEMBLY [AssemblyNameHere]
FROM 0x4D5A90000300000004000000FFFF000......<continue binary data>
WITH PERMISSION_SET = EXTERNAL_ACCESS
Boy howdy!
I have tried to reproduce this and create my own deployment application but I cant figure out how they create this binary stream. The info in BOL is not much help and I have not found any samples anywhere on how to create this stream in c#.
Anyone out there been able to get this to work?
-Ben
Hi there.
I have an assembly, call it A1, that I've deployed to a SQL Server 2005 database. I can use the managed stored procedures from A1 in SQL Server no problem.
In A1 there is a bit of code which uses the Assembly.Load() method, so load another assembly and use instances of class found in that external assembly. However, when I run the managed stored proc in A1 that uses Assembly.Load() I get the error:
Could not load file or assembly 'A1, Version=1.0.0.0, Culture=neutral,PublicKeyToken='????' or one of its dependencies. The system cannot find the file specified.
(note: for security I've changed some of the above line).
So I changed the Assembly.Load() to use
System.Data,Version=2.0.0.0,Culture=neutral,PublicKeyToken=b77a5c561934e089
I re-built the project, re-deployed it and ran the code in SQL Server - it worked. I could create an instance of a System.Data.DataSet for example. So why can't I load my own custom assembly? My assembly does have a strong name and it's installed in the GAC. I wrote a console app to try and Assembly.Load() my custom assembly and that worked fine (it was also running on the same server as the SQL Server).
So it's defiantely the SQL Server that can't 'see' my customer assembly. What do I need to do this assembly so that SQL Server will allow me to Assembly.Load it, just as it can with System.Data?
Thanks
Jas.
Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here:
Function Main()
on error resume next
dim cn, i, rs, sSQL
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
set rs = DTSGlobalVariables("SQLstring").value
for i = 1 to rs.RecordCount
sSQL = rs.Fields(0).value
cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution
rs.MoveNext
Next
Main = DTSTaskExecResult_Success
End Function
This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)
Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:
public Sub Main()
...
Dts.TaskResult = Dts.Results.Success
End Class
I get the following error when I attempt to compile this:
Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.
I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script:
- The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.
- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).
Given this statement:
dim cn, i, rs, sSQL
I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!
Dear Friends,
I am having 2 Tables.
Table 1: AddressBook
Fields --> User Name, Address, CountryCode
Table 2: Country
Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Thanks in advance.
Regards
Ramakrishnan
Singapore
28 March 2007
i already find the answer
thanks
Hello,
I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls.
I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems
(
@eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar,
@eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar,
@outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar,
@q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar,
@levent nvarchar, @eventdate nvarchar, @eventtime nvarchar
)
AS
UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile,
q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn,
outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3,
qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName,
CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime
WHERE (ePRN = @ePRN)
and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text);
cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text);
((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text);
cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text);
cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text);
cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text);
So is there any way to do it better than this way ??
Thank you
Hi all,
Could someone tell me if custom code function can capture the event caused by a user? For example, onclick event on the rendered report?
Also, can custom code function alter the parameters of the report, or refresh the report?
Thanks.
I'm writing my first web site using VS 2005 and with my login page I'm trying to link with my SQL database using the following setting in my web.config file
<appSettings> <add key="SQLDB" value="server=STEVE-LT; database=MasterDB; uid=sa pwd="/></appSettings>
Then in my Login.aspx file I use the following code to access the SQL database
Dim Sc As SqlConnection = New SqlConnection(System.Configuration.ConfigurationManager.AppSettings("SQLDB"))Dim SqlCmd As SqlCommand = New SqlCommand("Select Password, Name from Login")SqlCmd.CommandType = CommandType.StoredProcedure
Sc.Open()SqlCmd.Connection = Sc
This raises the following error message
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Could someone please tell me where I am going wrong. Thanks
I need to have database access via an
application to both sql server 6.5 & 7
the 6.5 uses mixed mode security,
the 7.0 uses trusted. Using
sp_addlinkedsrvlogin I can get from a client to
the 7.0 server, but not to the 6.5.
Is this even possible?
Can anyone tell me how to link to a oracle user? DO I use a predefined DSN? Do I just specify the server and the user and password?
Your assistance is appreciated,
David
I can't seem to link a 6.5 database from 7.0 and there's nothing in help which seems to help. Is it a "SQL Server" or do you have to use the OLE DB Provider? If the latter, what's supposed to be in the Product, Data Source, Provider String and Catalog fields? What about security? I've tried everything I can think of and can't get it to work. I also get errors creating a new DTS package that says "Could ot create Component Categories Manager", and then "Error during creation of DTS Package". I installed the desktop version of 7 on an NT Workstation. Has anyone successfully linked a 6.5 server in this environment?
View 4 Replies View RelatedHow would you link an online application form done in php to an SQL 7 server?
View 1 Replies View Relatedthis is the query I need help with
select a.RecordID,a.RelocateID,a.WhenConfirmed,b.RequestI D,b.DocumentID,b.RequestWhen from RelocateeDTA a inner join
docRequests b on ({a.RecordID}=' + CONVERT(VARCHAR, a.RecordID)'= b.WhereClause)
because I am trying to link RelocateeDTA that has RecordID to docRequests that has the same piece of data in field WhereClause but is a varchar, and I am getting an error message (syntax error or access violation)
Could somebody help me please
Hello there, im new here and wanted some help, i would be very grateful to anyone that can help:
I am setting up a DSN for my website (www.t-f-l.com, it may make more sense if you visit the site) i need it so members can sign up to the site (for the exact problem, click 'sign up now' on the website
I have set up the DSN but it says i need to link it to the database tables via MS access, im not sure at all how to do this...please can someone help
please explain in real idiot language....as i am new to this
dear experts,
i have two tables, tblcustomer and tblform. in tblcustomer i have cutomerid PK and i have also a field that link these two tables customername. in tblforms i have formname. customername and formname are not PK and customername has a lot of null values.
my question is that i want to link these two tables in customerid not the name and also to get the forms used by this customer. the thing is that i have to write a join query.
any suggestion to do that?
thanks my friends
I am not a database manager, but I work with people that use databases for sales and customer service... so I am not too familiar with the code and lingo... please bear with me.
We use two databases - one is in SQL, and it is for pre-sales customer service... i.e. tracking notes, phone calls, emails, and opportunities.
The second database is in Progress, and it is for actual quotes, tracking time, labor, materials, cost, and revenue.
As of now, our sales people have to enter new customers in the SQL database, and then duplicate the information in the Progress database. It's very frustrating, because everything needs to be entered twice - name, address, phone, shipping info, etc. etc. etc... When we first started this - 10 years ago - we were told that it could all be linked.
So my question is - is it possible to link these databases together? When our sales people enter a new contact in CRM, I'd like it to be automatically entered into the Progress database. If they make a change to a phone number, I'd like that to be updated in the Progress database. Also the other way around - if a shipping address is changed in the Progress database, I'd like it updated automatically in the SQL database.
Please tell me this is possible - and easy!!! Thanks for any help you can provide at all.
Jon
Does Exchange 2000 and SQL 2000 have to be the same machine to use exoledb.dll?
I want to link to an Exchange server and gain access to a Public Folder Contact Object for use as a lookup table within an Access front end. Someone directed me to use the Exchange OLE DB Provider, but it does not exist on my SQL machine.
Any help is appreciated
Sorry If I have posted this in the wrong head,
I would like to Establish connectivity to a Oracle9i DB thro Linked Server, Can any of you guide me to suitable links...
Thanks
I would like to use MVJ's formula for creating a date table.
I would like to use it with our main ERP database. However, I am reluctant to make changes to it because I fear that at some point when we upgrade that software and it's database that the upgrade program will delete my table.
So, here is my question. Performance wise, does it matter whether I add the date table to our ERP database or if I create another database (on the same server) for the custom date table? Does linking between databases take substantially longer than linking within the same database?
I know it's possible to link tables between Access and SQL Server using ODBC....however can u use DAO to do this? If there's a way i would appreciate some help. Thanks in advance.
View 2 Replies View Related