[Flat File Source [212]] Error: The "output column "Column 0" (237)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Column 0" (237)" specifies failure on error. An error occurred on the specified object of the specified component"
I note under BIDS, Properties tab, that the Flat File is assigned an ID of 212. But is the number (237) and ID or an error value? How can I list all "ID's" used in a package?
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
I am trying to audit data quality based on some defined data quality rules. The rules are stored in tables and processed using stored procedures. I am facing a problem while generating audits. Let's say I am trying to audit data in OrderDetail table. The table design is mentioned below...I inserted some sample data into the table using RedGate data generator.The audit table output I am expecting is as mentioned in the screenshot below
Its the PrimaryKeyAttributeValues column I am facing problems with. I am using STUFF function within a dynamic SQL query to get the primary key's as a list of comma separated values.
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red  - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red  - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
          red   blue  green   pen       2    0    1   marker    0    1    0   pencil      1    3    0   highlighter  1    1    1Â
We tried Sum but not able to display in single row.
Hi I have one problem in SSIS for passing Variable Values while executing Package. I'm giving in details as below:
I opened Microsoft SQL Server Management Studio Made Connection to Integration Services To Execute Package I Right Clicked and Click on Run Package Then I Clicked on Execute and package was executed successfully.
Problem is that if I try to Set Values then Package through Error DTExec: Could not set ProcessMode value to M.
Basically I could not understand in which format I should pass the Variables. What I tried is listed below:
ProcessMode;M Package.Variables[User:rocessMode].Value;M Package.Variables[ProcessMode].Value;M But every time I got errors.
And then I tried from Command Line DTEXEC /DTS "MSDBLoad_Order" /SERVER SERVERNAME /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V /SET Package.Variables[ProcessMode].Value;M
First time Process run successfully. And it has changed the ProcessMode to M also. But after that it was also not changing the ProcessMode Value to M.
Please help in regarding. I tried a lot from Site examples also, but could not get proper solution.
Hi all. I need to create a select query in my program that will select from a list of values that are stored in a dataset. Let see this example: selectcmd = "Select * from mytable where myfile =" ??????? cmd = New SqlCommand(selectCmd, da.SelectCommand.Connection)
The values I need to put on ????? are stored in a dataset. For example if the dataset is populated with the following values: A B C D E
I would like to build a query like that: selectcmd = "Select * from mytable where myfile = ‘A’ or ‘B’ or ‘C’ or ‘D’ or ‘E’ “
I have a dropdownlist that is populated with an sqldatasource as follows:
SELECT [Project_ID], [Title] FROM [Projects] WHERE [Username] = @Username AND Hide ='false'
The Datavalue vield of the DDL is populated with the [Title].
When the user submits the form [including the value of the of the drop down list] i want to be able to add the Project ID and the Title Values into another database table.
For a controlParameter in the ASP code, how do I retreive the selectedValue of the drop down list?Would this work? <asp:controlParameter Name="InvoiceNumber" Type="String" ControlID="ddAdSize.Value" />
Hello I have a newbie question. If I have a table of the form:Table1{id, name} with the valuesid: 9 , name: test1,id: 7 , name: test2,id: 3 , name: test3,id: 15 , name: test4, id: 5 , name: test5,id: 13 , name: test6,.........If I have a list generated from user selection ( LIST{1, 7, 8, 15} ,) will I in a way be able to use this list in a query of the form, thus only having to make one query to the database: SELECT id, nameFROM Table1WHERE Table1.id in LIST Or is the solution to make multiple queries to the database, one for each member of the list, of the form:SELECT id, nameFROM Table1WHERE ID = @IDThanks in advance /dresen
I would like to write a select statement where I specify a list of values in the 'Select' line, and would like the output to have one line for each element.
I tried using Case with no success.
For example:
Select a.id, a.timestamp, ('rowA','rowB') as 'Tag' from tableOne a where a.id = '1'
So the 'where' line would produce one row, however, the overall statement would produce two.
ID TimeStamp Tag -------------------------------- 1 2012-12-12 rowA 1 2012-12-12 rowB
I'm looking for a way to store a list of values in a variable. The query user will need to input a list of file numbers, and my query will need to perform a couple operations on that same list of values, which is why it seems a variable would be most appropriate.
I can't obtain the list of values from the database as they will have to be entered by the user. I'm imagining storing these in a table variable.... User just copies/pastes the list of values somewhere into the query code and executes as usual.
We're using MS Access 2010 as a frontend to an SQL server back-end. From Access, I can run read-only queries and pass-through queries. I'd like to use a local Access table as part of a join to server data. As a non-pass-through query, it's slow; about 5 min to join to 2 other tables.
I could use VBA to turn the local table into part of a pass-through query, with a large in() statement, or several where x='' ors but the local table may have 50000 entries in it. Is there a good or right way to pass this data in the query if I don't have write access to the server?
Hi,I like to have a SQL script which could update a table to set one attributeto a random value picked from a given list. The prototyping code is asbelow:select @value_list = ('John', 'David', 'Mathew', 'Paul')....update EMP set emp_name = @random_namewhere ...where random name is randomly got from the given list. Of course there willbe a cursor so that different row may have different random name but notnecessary unique. Also the attribute and the list could be any valid commonSQL data typesThanks!Ximing
I have [TableAccount.AccountType] field which can store these values:
Value C S E
How do I list all available values for a field? Using Distinct can only list all entries in the db, but does not list all values available for the field.
I have several tables that are related with the same primary key that I need to make a consolidated list of values for. The schema of each table is similar but some have more or less fields than others. I want to make a list of all table names, field names, and the value of that field. I can select all tables included from sysobjects. The existence of the key is probable but not guaranteed in all tables. The basic table format is: Table1------ID Field1 Field2 Field31 0.0 4.1 3.92 0.5 1.3 0.23 7.1 8.8 9.3 Table2------ID Field10 0.41 3.32 2.73 5.7 Table3------ID Field1 Field22 2.4 4.63 4.3 8.1 Format of the result set:(specifying ID = 2) Table_Name Table_Field ValueTable1 Field1 0.5Table1 Field2 1.3Table1 Field3 0.2Table2 Field1 2.7Table3 Field1 2.4Table3 Field2 4.6
How can I store multiple selected values (from a dropdown list) in mysql database?
PHP Code:
<form method="post" action="storedetails.php">    Research Interest:<br/>    <select multiple="yes" size="6" name="interest[]">    <option id="webt" value="webt">Advanced Web Tech1nologies</option>    <option id="mobhum" value="mobhum">Mobile and Humanoid Robots</option>   Â
I have two tables, a dates table and a values table. They are joined on the date column.The date table has a range, say from today as far as 20 days from now, incrementing by 1 day each row.The values table may have a row for a day, and may not. If the day has a value I want to display that value.If the day does not have a value in the values table I want to display the last known value.
I think this can be done with windowing functions in a set based manner but have not been able to work it out. I have done it procedurally but im not happy with that at all, and really want to see if this is possible in a set based manner.Below is some simplified code to allow testing with sample data.
create table DimDate ( DateCol date ) create table TotalsData ( DateCol date
I need to list all students who have both parents phone number is null. The parent relationship values 1 and 2 indicates the person is either Mom (value 2) or dad (value 1) of the student. Note: I am using student parent as an example to write my query.
SET NOCOUNT ON; DECLARE @items TABLE (ITEM_ID INT, ITEM_NAME VARCHAR(10)) INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 10,'ITEM 1' INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 11,'ITEM 2' INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 12,'ITEM 3' INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 13,'ITEM 4' INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 14,'ITEM 5' INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 15,'ITEM 6' INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 16,'ITEM 7' INSERT INTO @items (ITEM_ID, ITEM_NAME) SELECT 17,'ITEM 8' SELECT * FROM @items
-- table with categories
SET NOCOUNT ON; DECLARE @categories TABLE (CAT_ID INT, CAT_NAME VARCHAR(10)) INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 100,'WHITE' INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 101,'BLACK' INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 102,'BLUE' INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 103,'GREEN' INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 104,'YELLOW' INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 105,'CIRCLE' INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 106,'SQUARE' INSERT INTO @categories (CAT_ID, CAT_NAME) SELECT 107,'TRIANGLE' SELECT * FROM @categories
--table where categories are assigned to master categories
SET NOCOUNT ON; DECLARE @master_categories TABLE (MASTERCAT_ID INT, CAT_ID INT) INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 1,100 INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 1,101 INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 1,102 INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 1,103 INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 1,104 INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 2,105 INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 2,106 INSERT INTO @master_categories (MASTERCAT_ID, CAT_ID) SELECT 2,107 SELECT * FROM @master_categories
-- items-categories assignment table
SET NOCOUNT ON; DECLARE @item_categories TABLE (CAT_ID INT, ITEM_ID INT) INSERT INTO @item_categories (CAT_ID, ITEM_ID) SELECT 100,10 INSERT INTO @item_categories (CAT_ID, ITEM_ID) SELECT 105,10 INSERT INTO @item_categories (CAT_ID, ITEM_ID) SELECT 100,11 INSERT INTO @item_categories (CAT_ID, ITEM_ID) SELECT 105,11
[code]....
So now I need to query the table @t4 in and to determine the items that are assigned to category 'WHITE' in master category 1 and to 'CIRCLE' in master category 2.The important thing is to return items that are assigned solely to 'WHITE' in master cat 1 and solely to 'CIRCLE' in master cat 2.In the above example it would be only the ITEM 1 (id=10) that is returned:
1. ITEM 2 (id=11) is not returned because it has the assignment to category 'SQUARE' in master cat 2 additionally
2. ITEM 3 (id=12) is not returned because it has the assignment to category 'BLACK' in master cat 1 additionally
3. ITEM 4 (id=13) is not returned as it does not have assignment to category 'CIRCLE' in master cat 2 but only to 'WHITE' in master cat 1
3. ITEM 5 (id=14) is not returned as it does not have assignment to category 'WHITE' in master cat 1 but only to 'CIRCLE' in master cat 2
I have a custom list(say a list for account numbers, account numbers starting with 13 form a group, then starting with 14 form a group and like that)
and then there are tables inside this list. the report will be displayed based on the values of this custom list.
i also have a drill through report for this. now when i pass fields!accountnumber.uniquename for this list only the first of the group values say 130001 is selected..
Because packages are not edited in msdb, there exists a chance that I might not always remember to re-import a modified package. So I would like to include "something" in the package that would write the date last changed of the package to the package log.
Do you have any suggestions that I could use now? I tried the Script example in BOL and it did not write anything to the package log.
When the log entry is written for each step, include the elapsed time since the package started.
While the csv format is now the default, is it possible to have any other format? I seem to remember in DTS there were some messages that were displayed in Name:Value pairs. Sometimes this is more helpful and requires less horizonal scrolling.
