So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
I have two machines running SQL Express that I am attempting to use as proxies for a client application as the security admin has deemed that outside clients can not connect directly to the main DB servers.
When I have one of the SQL Express boxes subscribed to my SQL 2005 standard server, everything is happy, but when I attempt to add the second SQL Express box as a subscriber, everything seems to blow up.
OK, I'm setup as a merge with updates and no filter since I want all of the servers to get all of the data. I'm also on a non-standard port but have my aliases setup, and I don't have any connection issues. When I run the subscription wizard from the management studio, it comes back with "Success", but about 2 seconds later, I get errors on both subscribers from the replication monitor. Oh, I am aslo setup for push subscriptions and am setup to run continuously.
Here is the error message from the rep. monitor.
Error messages:
No subscription is on this publication or article. (Source: MSSQLServer, Error number: 14050) Get help: http://help/14050
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001) Get help: http://help/MSSQL_REPL-2147201001
What I find odd is that It only dies when I try to add a second subscriber, and then it kills both of them. Any help or ideas on where I should look would be most welcome.
I am trying to audit data quality based on some defined data quality rules. The rules are stored in tables and processed using stored procedures. I am facing a problem while generating audits. Let's say I am trying to audit data in OrderDetail table. The table design is mentioned below...I inserted some sample data into the table using RedGate data generator.The audit table output I am expecting is as mentioned in the screenshot below
Its the PrimaryKeyAttributeValues column I am facing problems with. I am using STUFF function within a dynamic SQL query to get the primary key's as a list of comma separated values.
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red  - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red  - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
          red   blue  green   pen       2    0    1   marker    0    1    0   pencil      1    3    0   highlighter  1    1    1Â
We tried Sum but not able to display in single row.
I have a table of results for various measured quantites and i need to turn this into a view. Only problem is i need to seperate the measured quantities and their respective values into seperate columns.
SELECT DISTINCT Anvendelseskoder.[Usage Code] AS [Building Code], Anvendelseskoder.[Usage Code Value] AS [Building Description], HeleDanmark_DAWA.KVHx FROM Anvendelseskoder RIGHT JOIN HeleDanmark_DAWA
[Code] ...
It gives me the following error: Msg 4104, Level 16, State 1, Line 26 The multi-part identifier "aa.KVHx" could not be bound.
When clicked, it marks the first time i call "aa.KVHx"Â Which I do in: "WHERE S2.Nr=2 AND s2.KVHx=aa.KVHx) AS Kode2,"
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
Below is the stored procedure i have it works fine if i have 1 value passed to @invited_by but i want to modify but i want this code to be working for multiple inputs .Lets say if i do
exec [dbo].[sp_GetInvitationStatusTest] 'Test1 . I get the desired output but i want this procedure to work for exec [dbo].[sp_GetInvitationStatusTest] 'Test1,Test2'. USE [merck_acronyms] GO
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
How is the best way to make a function for summing an arbitrary number of times values (table parm?)- I 've read it's necessary to convert to seconds, sum then convert back, but Im' wondering if there's an alternative.
Here's the example I want to sum: 00:02:01:30 00:01:28:10 00:01:01:50 00:06:50:30 00:00:01:50
Hi all. I need to create a select query in my program that will select from a list of values that are stored in a dataset. Let see this example: selectcmd = "Select * from mytable where myfile =" ??????? cmd = New SqlCommand(selectCmd, da.SelectCommand.Connection)
The values I need to put on ????? are stored in a dataset. For example if the dataset is populated with the following values: A B C D E
I would like to build a query like that: selectcmd = "Select * from mytable where myfile = ‘A’ or ‘B’ or ‘C’ or ‘D’ or ‘E’ “
I have a dropdownlist that is populated with an sqldatasource as follows:
SELECT [Project_ID], [Title] FROM [Projects] WHERE [Username] = @Username AND Hide ='false'
The Datavalue vield of the DDL is populated with the [Title].
When the user submits the form [including the value of the of the drop down list] i want to be able to add the Project ID and the Title Values into another database table.
For a controlParameter in the ASP code, how do I retreive the selectedValue of the drop down list?Would this work? <asp:controlParameter Name="InvoiceNumber" Type="String" ControlID="ddAdSize.Value" />
[Flat File Source [212]] Error: The "output column "Column 0" (237)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Column 0" (237)" specifies failure on error. An error occurred on the specified object of the specified component"
I note under BIDS, Properties tab, that the Flat File is assigned an ID of 212. But is the number (237) and ID or an error value? How can I list all "ID's" used in a package?
Hello I have a newbie question. If I have a table of the form:Table1{id, name} with the valuesid: 9 , name: test1,id: 7 , name: test2,id: 3 , name: test3,id: 15 , name: test4, id: 5 , name: test5,id: 13 , name: test6,.........If I have a list generated from user selection ( LIST{1, 7, 8, 15} ,) will I in a way be able to use this list in a query of the form, thus only having to make one query to the database: SELECT id, nameFROM Table1WHERE Table1.id in LIST Or is the solution to make multiple queries to the database, one for each member of the list, of the form:SELECT id, nameFROM Table1WHERE ID = @IDThanks in advance /dresen
I would like to write a select statement where I specify a list of values in the 'Select' line, and would like the output to have one line for each element.
I tried using Case with no success.
For example:
Select a.id, a.timestamp, ('rowA','rowB') as 'Tag' from tableOne a where a.id = '1'
So the 'where' line would produce one row, however, the overall statement would produce two.
ID TimeStamp Tag -------------------------------- 1 2012-12-12 rowA 1 2012-12-12 rowB
I'm looking for a way to store a list of values in a variable. The query user will need to input a list of file numbers, and my query will need to perform a couple operations on that same list of values, which is why it seems a variable would be most appropriate.
I can't obtain the list of values from the database as they will have to be entered by the user. I'm imagining storing these in a table variable.... User just copies/pastes the list of values somewhere into the query code and executes as usual.
We're using MS Access 2010 as a frontend to an SQL server back-end. From Access, I can run read-only queries and pass-through queries. I'd like to use a local Access table as part of a join to server data. As a non-pass-through query, it's slow; about 5 min to join to 2 other tables.
I could use VBA to turn the local table into part of a pass-through query, with a large in() statement, or several where x='' ors but the local table may have 50000 entries in it. Is there a good or right way to pass this data in the query if I don't have write access to the server?
Hi,I like to have a SQL script which could update a table to set one attributeto a random value picked from a given list. The prototyping code is asbelow:select @value_list = ('John', 'David', 'Mathew', 'Paul')....update EMP set emp_name = @random_namewhere ...where random name is randomly got from the given list. Of course there willbe a cursor so that different row may have different random name but notnecessary unique. Also the attribute and the list could be any valid commonSQL data typesThanks!Ximing
I have [TableAccount.AccountType] field which can store these values:
Value C S E
How do I list all available values for a field? Using Distinct can only list all entries in the db, but does not list all values available for the field.
