Hi I am a newbie to SQL.
I have a historical list of digatal points listed by time.ie: 3 fields
PointName;Date/Time;State.
I need to return a list of When a specific point chsnges state.
For example a list everytime Point A transitions to State 1.
Any help is appreciated.
--
Posted via http://dbforums.com
Hi all,
With C# or VC++ we can use ADO.NET that support the system work smothly when failover occur. I would like to handle failover in t-sql enviroment and it seam to be hard for me when swiching ":connect <servername> code
Do you have any idea to handle it with T-SQL. I need to make a demo on it. Please help!
Hello all. I have a table with two coulmns CODE and DESCRITPION. Can anyone suggest how i can go about deleteing the entire record where two or more codes are the same?
Thanks.
Hi,
I was hoping a sharp eye may be able to pick up on what I am doing wrong here, I am i must be making a comon mistake. If necessary I am happy to create and post a sample if necessary.
Problem:
The publication parent table has a filter (defined below) and also has a join filter(defined below) to a child table. When changes are made to the parent and child table and synchronised a conflict is raised. For the child table for some reason the merge agent is saying an explicit update occured at the publisher but the values at the publisher have not changed at all and no sql has been executed to update the publisher rows. This in effect is stopping the changes to the child table being applied until i manually apply them in the conflict resolver. The strange thing is the conflict should not occur in the first place.
Perhaps my SQL server 2005 version? 9.00.2050.00 SP1 Standard Edition
Environment:
SQL Server 2005 - 9.00.2050.00 SP1 Standard Edition
SQL Server Mobile
Detail:
FKs are
FK: Job.JobScheduleID --> JobSchedule.ID
FK: JobDetail.JobID --> Job.ID
All three tables have int based IDs that are auto increment.
Publication Articles:
JobSchedule is download only
Job is Bidirectional, identity range management is MANUAL (only updates occur on this table)
JobDetail is Bidirectional, identity range management is MANUAL (only updates occur on this table)
Filters are of the following form:
Filter Job:
SELECT <published_columns> FROM [dbo].[Job] WHERE convert(nchar,[companyID])=Host_Name() AND [JobCompletedDate] IS NULL AND
( [JobScheduleID] in (SELECT distinct ID from JobSchedule where GETDATE() BETWEEN [JobSchedule].[start] AND [JobSchedule].[end]) )
Join Filter Job --> JobDetail
SELECT <published_columns> FROM [dbo].[Job] INNER JOIN [dbo].[JobDetail] ON [Job].[ID] = [JobDetail].[JobID]
Now the first thing to note with respect to using GetDate() i have read http://msdn2.microsoft.com/en-us/library/ms365153.aspx so i thought that i would remove that portion of the Filter on the Job table just to see what happens.
SELECT <published_columns> FROM [dbo].[Job] WHERE convert(nchar,[companyID])=Host_Name() AND [JobCompletedDate] IS NULL
This still did not resolve the issue. I then Remove the AND [JobCompletedDate] IS NULL and it then started working fine (cool) but of course no longer satisfys the rule i want to create (seriously uncool ).
Any ideas out there ?
Much appreciated,
pdns
Hi,
I'm trying to export sql table as fixed length text file with format file but I got the following error message:
Error = [Microsoft][ODBC SQL Server Driver][SQL Server]
Warning: Server data (61 bytes) exceeds host-file field length (60 bytes) for field (4).
Use prefix length, termination string, or a larger host-file field size.
Truncation cannot occur for BCP output file
All fields in the SQL input table have char data type and I use the format file like this:
7.0
29
1 SQLCHAR 0 10 "" 1 SEQ
2 SQLCHAR 0 1 "" 2 NPARSED
3 SQLCHAR 0 115 "" 3 COMPANY
4 SQLCHAR 0 60 "" 4 ADDR1
....
27 SQLCHAR 0 1 "" 27 LACS
28 SQLCHAR 0 2 "" 28 DPV
29 SQLCHAR 0 2 "
" 29 ZIP4CODE
I've been researched about this error but I couldn't find the clear answer.
The strange thing is that all the records are char() fields, not varchar()
And I checked the max length record for the 4th column(ADDR1) and it was 60, not 61.
However I'm still getting the error.
The output file was exported but some of the records have short length.
Is this some kind of bcp bug?
I used SQL Server 2000 Standard w/ SP4
And the following is the command that I used:
declare @cmd varchar(2000)
SET @cmd = 'bcp "Input_table" out "D:AddressUpdateTmpxFixADDR.dat" -fD:AddressUpdateTmpxFixADDR.fmt -Usa -Psapass -SMyMachine''
print(@cmd)
EXEC master..xp_cmdshell @cmd
Please let me know if anyone solve the similar problem.
Thanks,
- Hyung -
Hi,
I am using following code to fill my dataset. when multiple user connect to the web-site it will give me following error:
Error Message: Transaction (Process ID 98) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
I am using stored procedure to select records from database.
DataSet ds = new DataSet();SqlConnection mc = OpenSqlConnection();
try
{SqlCommand cmd = new SqlCommand(strCmd, mc);cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandTimeout = 0;if (parameters != null)
{foreach (KeyValuePair<string, object> p in parameters)
{
cmd.Parameters.AddWithValue(p.Key, p.Value);
}
}SqlDataAdapter da = new SqlDataAdapter(cmd);
da.Fill(ds);
}catch (Exception ex)
{
}
finally
{
mc.Close();
}
return ds;
Appreciate your help,
prashant
I had write a ActiveX service to delete several tables and those records are more than 100000. When I test it by deleted 1000 records it is ok, but once the volum is increase until 100000, it will give me a error message said timeout operation fail.
how can i overcome this problem. please!!!!
We get this error when we add IP addresses to the Windows system when SQL 2005
database activity is on-going:
Database error: A transport-level error has occurred when receiving results
from the server. (provider: TCP Provider, error: 0 - The semaphore timeout
period has expired.)
.NET application can be running for weeks without error, but after adding a
new IP address, application gets 5-16 'transport-level errors' before
correcting itself.
Error occurs on Windows XP computer in our case. SQL Server, running on Windows server 2003, doesn't seem to pick up on the newly added IP address.
Hi, I work in a hosting company and one of the customer's has the following error listed in the event viewer, they have asked us to look into the problem as the web server is showing the error and they suspect it is a connection problem to the database. From a windows OS point of view I cannot find anything that could be causing this. Could someone confirm that this looks like and app/coding issue rather than an OS issue?? System.Data.SqlClient.SqlException: Timeout expired. The timeout periodelapsed prior to completion of the operation or the server is notresponding.--------------------------------------------------------------------DEBUG INFOUnable to connect to SQL Server session database. Timeout expired. The timeout period elapsed prior to completion ofthe operation or the server is not responding.--------------------------------------------------------------------BASE EXCEPTION TOSTRINGSystem.Data.SqlClient.SqlException: Timeout expired. The timeout periodelapsed prior to completion of the operation or the server is notresponding. at System.Data.SqlClient.SqlConnection.OnError(SqlExceptionexception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlExceptionexception, Boolean breakConnection) atSystem.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSetbulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReaderds, RunBehavior runBehavior, String resetOptionsString) atSystem.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehaviorcmdBehavior, RunBehavior runBehavior, Boolean returnStream, Booleanasync) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehaviorcmdBehavior, RunBehavior runBehavior, Boolean returnStream, Stringmethod, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehaviorcmdBehavior, RunBehavior runBehavior, Boolean returnStream, Stringmethod) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehaviorbehavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at System.Web.SessionState.SqlSessionStateStore.DoGet(HttpContextcontext, String id, Boolean getExclusive, Boolean& locked, TimeSpan&lockAge, Object& lockId, SessionStateActions& actionFlags)--------------------------------------------------------------------STACKTRACE at System.Data.SqlClient.SqlConnection.OnError(SqlExceptionexception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlExceptionexception, Boolean breakConnection) atSystem.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior,SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSetbulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReaderds, RunBehavior runBehavior, String resetOptionsString) atSystem.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehaviorcmdBehavior, RunBehavior runBehavior, Boolean returnStream, Booleanasync) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehaviorcmdBehavior, RunBehavior runBehavior, Boolean returnStream, Stringmethod, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehaviorcmdBehavior, RunBehavior runBehavior, Boolean returnStream, Stringmethod) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehaviorbehavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at System.Web.SessionState.SqlSessionStateStore.DoGet(HttpContextcontext, String id, Boolean getExclusive, Boolean& locked, TimeSpan&lockAge, Object& lockId, SessionStateActions& actionFlags)
View 1 Replies View Related
Hai friends,
I was created report with 9 sub reports , with multiple column driildown for based on client requirement, iam displying the correct data and in database server data is availabel between 11/01/2007 to 11/30/2007, iam applying the input parameters are begin date, end date, region(defaultly ALL), Department(defaulty ALL), site(defaulty ALL).
my problem is while selecting the default dates (minum and maximum dateranges) with selecting ALL regions, ALL departments, ALL sites iam not getting the output. it showing error like
" An error occur on local report processing, an internal error occur on report server, see error log for more details"
but iam selecting the date as 11/01/2007 to 11/02/2007( that is not large records, between two dates only) it shows correct output.
while applying the default ranges that is 11/01/2007 to 11/30/2007 report shows above mentioned error.
problem with 9 sub reports ? or any thying
please help me how to solve my problem next coming two days i have to deploy my report to client, at the time it will show data between default date ranges.
Help me thanks in advance
JACKS V
'****************************************************************************
Cmd.CommandText = "Drop Table Raj"
Cmd.ExecuteNonQuery()
Cmd.CommandText = "Select * Into Raj From XXX"
Cmd.ExecuteNonQuery()
'**************************************************************************
This generates error that Table already exist.
If Wait 1 sec then execute statement then it works fine.
Thanks in Advance
Piyush Verma
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
So the output would look like :
CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]
SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0
GROUP BY
preop.Case_ID
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
HI...
I need to do a simple task but it's difficult to a newbie on ssis..
i have two tables...
first one has an identity column and the second has fk to the first...
to each dataset row i need to do an insert on the first table, get the @@Identity and insert it on the second table !!
i'm trying to use ole db command but it's not working...it's showing the error "Insert Value list doest not match column list"
here is the script
INSERT INTO Address(
CepID,
Street,
Number,
Location,
Complement,
Reference)Values
(
?,
?,
?,
?,
?,
?
)
INSERT INTO CustomerAddress(
AddressID,
CustomerID,
AddressTypeID,
TypeDescription) VALUES(
@@Identity,
?,
?,
?
)
what's the problem ??
Ok, I want to write a stored procedure / query that says the following:
Code:
If any of the items in list 'A' also appear in list 'B' --return false
If none of the items in list 'A' appear in list 'B' --return true
In pseudo-SQL, I want to write a clause like this
Code:
IF
(SELECT values FROM tableA) IN(SELECT values FROM tableB)
Return False
ELSE
Return True
Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.
I may have to achieve this with some kind of logical loop but I don't know how to do that.
Can anyone help?
I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns."
How can I do this?
Insert Query:
insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE)
SELECT DISTINCT
tri_IDENT.IDA AS PPID,
tri_Ldg_Tran.CLM_ID AS PTicketNum,
tri_ClaimChg.Line_No AS PLineNum,
tri_Ldg_Tran.Tran_Amount AS PAmount,
CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT'
THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier
ELSE 0 END AS PPatPay,
tri_Ldg_Tran.Create_Date AS PDepositDate,
tri_Ldg_Tran.Tran_Date AS PEntryDate,
tri_ClaimChg.Hsp_Code AS PHCPCCode,
tri_Ldg_Tran.Adj_Type,
tri_Ldg_Tran.PRS_ID,
tri_Ldg_Tran.Create_Time,
tri_Ldg_Tran.Adj_Group,
tri_Ldg_Tran.Payer_ID,
tri_Ldg_Tran.TRN_ID,
tri_ClaimChg.Primary_Claim,
tri_IDENT.Version
FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN
qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc =
qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN
tri_Ldg_Tran RIGHT OUTER JOIN
tri_IDENT LEFT OUTER JOIN
tri_ClaimChg ON tri_IDENT.Pat_Id1 =
tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID =
tri_ClaimChg.PRS_ID AND
tri_Ldg_Tran.Chg_TRN_ID =
tri_ClaimChg.Chg_TRN_ID
AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN
tri_Payer ON tri_Ldg_Tran.Payer_ID
= tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type
= tri_Ldg_Tran.Pay_Type AND
qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type
WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg')
AND (tln_PaymentTypeMappings.PTMClientCode = 'SR')
AND (tri_ClaimChg.Primary_Claim = 1)
AND (tri_IDENT.Version = 0)
Hi,
I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.
Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'
My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.
performance is a not that great so I'm thinking that my code can be improved.
SQL Express 2005 SP2
Windows Server 2003
1GB Ram....(I know, I know)
TIA
Code Snippet
GO
CREATE TABLE [dbo].[Tokens](
[TokenID] [int] IDENTITY(1,1) NOT NULL,
[Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED
(
[TokenID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens]
(
[Token] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
CREATE FUNCTION [dbo].[SplitTokenList]
(
@TokenList varchar(max)
)
RETURNS
@ParsedList table
(
Token varchar(255)
)
AS
BEGIN
DECLARE @Token varchar(50), @Pos int
SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ','
SET @Pos = CHARINDEX(',', @TokenList , 1)
IF REPLACE(@TokenList , ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1)))
IF @Token <> ''
BEGIN
INSERT INTO @ParsedList (Token)
VALUES (@Token) --Use Appropriate conversion
END
SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos)
SET @Pos = CHARINDEX(',', @TokenList, 1)
END
END
RETURN
END
GO
CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList]
@TokenList varchar(max)
AS
BEGIN
SET NOCOUNT ON;
create table #Tokens (TokenID int default 0, Token varchar(50))
create clustered index Tind on #T (Token)
DECLARE @NewTokens table
(
TokenID int default 0,
Token varchar(50)
)
--Split ID's into a table
INSERT INTO #Tokens(Token)
SELECT Token FROM SplitTokenList(@TokenList)
BEGIN TRY
BEGIN TRANSACTION
--get ID's for any existing tokens
UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0)
FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token
INSERT INTO Tokens(Token)
OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens
SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0
return the list with id for new and old
SELECT TokenID, Token FROM #Tokens
WHERE TokenID <> 0
UNION
SELECT TokenID, Token FROM @Tokens
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @er nvarchar(max)
SET @er = ERROR_MESSAGE();
RAISERROR(@er, 14,1);
ROLLBACK TRAN
END CATCH;
END
GO
Hi,
I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task->
dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
Hi All,
I have seen a few other people have this error.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
I want to allow visitors to filter a list of events to show only those belonging to categories selected from a checklist.
Here is an approach I am trying:
TABLE Events(EventID int, Categories varchar(200))
EventID Catetories
--------------------------
1 ‘6,8,9’
2 ‘2,3’
PROCEDURE ListFilteredEvents
@FilterList varchar(200) -- contains ‘3,5’
AS
SELECT EventID FROM Events
WHERE (any value in Categories) IN @FilterList
Result:
EventID
----------
2
How can I select all records where any value in the Categories column
matches a value in @FilterList. In this example, record 2 would be
selected since it belongs to category 3, which is also in @FilterList.
I’ve looked at the table of numbers approach, which works when
selecting records where a column value is in the parameter list, but I
can’t see how to make this work when the column itself also contains a
comma delimited list.
Can someone suggest an approach?
Any examples would be greatly appreciated!
Gary
Amol writes "I wish to write a UDF that will concatenate values from each row of a column for a select query. for each invocation of the UDF it should check the callee query to see if its the next row of the current query and concatenate the value or if its a new query start from null.
eg. : select list(name) from employee
will return a "single" list of all names in the employee table as a comma delimited string.
TIA, Amol."
I have tilted and need some help.
I have a table with columns:
ArtNo, WareNo, State + a few others
Sample data:
111, 1, 3
111, 2, null
111, 4, 10
222, 1, 8
222, 2, 3
222, 1, 3
and so on
Each artNo is in several WareNo and has a state
Each WareNo has several ArtNo
I want to run through the table and get * for each combination of ArtNo&WareNo that does not have any post in the table with State = 3.
Best regards
Inno
Hello everybody,
I am new to the whole reporting World and I was wondering if their is a solution for my problem. I searched for one and a half hour and I am getting desperate.
I need to repeat a report. So I thought: I can use a list for that. But when I placed all my objects in that list and linked it to a data source it gives an error at every object. I had this problem before and I made a work around so I did not solve it. I need a list in a list or a matrix in a list. I get the following errors:
Error 1 [rsDataRegionInDetailList] The list €˜list3€™ is in a list that has no group expressions defined for it. To use a data region in a list, the list must have group expressions. c:projectencitrix estcitrixusagedb
eportCitrixUsage.rdl 0 0
Error 2 [rsFieldReference] The Value expression for the textbox €˜textbox16€™ refers to the field €˜USERNAME€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope. c:projectencitrix estcitrixusagedb
eportCitrixUsage.rdl 0 0
I hope you can help me, thanks in advance!
Yours,
Stef
I have done queries before where you have something like this:
Select name
From people
Where uid in (Select UID from employees where salary > 500000)
as an example.
I have to use stored procedures, I can't connect directly...
I have a datatable of records that I select from a database. In the database table there is a flag 'checkedOut' (bit field) wich I want to set to true (1) for each of these records.
Since I have to use stored procedures I think I am limited to passing in parameters. I wrote a function using a stringbuilder to concatonate the key fields into a comma delimited list "1, 55, 98" etc. and thought to use it as the clause in the 'in' sample ie:Update ServiceRequests set
CheckedOut = 1
Where UID in (@UIDList)
I have tried a few different things, none works.
Any ideas how you might accomplish this with stored procedures?
The records are passed to a thread to be dealt with and it's possible the next time it runs it will pick up the same records for processing if the first thread isn't through. I needed the 'CheckedOut' to ensure I don't accidentally do that.
Thanks.
Hello All,
I need to download the table containing the list of the database in sql server 2005, where can this be downloaded
thankx
Bibek
How can I get a list of the last payment for each client?
SELECT ClientID,PaymentDate,PaymentAmount FROM tblClients INNER JOIN tblPayments ON tblPayments.ClientID = tblClients.ClientID
HI,
say I have a list from an sql statement (results list)
this list contains 10 items
In another table, in one particular column - there is a match for one of these items from the initial list.
SO... this may be the list
_____________________
itemnumber
1
2
3
4
5
6
7
8
9
10
------------------------------
in the other table there is a match...
but just for one item on that list.
____________________
othertablefield
11
13
14
3 <------ match
99
78
----------------------------
How do I find that match with my sql statement?
Hi,
Is there anything equivalent to Oracle's Select * from tab in MS SQL.
i need to give list all table in my database plaese give me qurity?
thanks a lot
Hi friends,
How I can get list of tables and list of fields within those tables in SQL server.
Thnak a lot.
How to obtain the list of the tables of a base by un script
View 1 Replies View RelatedConverting Sybase to SQL Server !
On the Sql Server's database I did :
-- test list function with cursor
alter proc proc_list(@key varchar(255), @retlistvalues varchar(8000) output)
as
declare @incrcurs2 cursor
declare @value varchar(255)
declare @listvalues varchar(8000)
set @incrcurs2 = cursor scroll dynamic
for
select t.title_Id from publishers p, titles t where p.pub_id = t.pub_idand p.pub_id = @key
order by t.pub_id
open @incrcurs2
fetch next from @incrcurs2 into @value
select @listvalues = convert(varchar(255),@value)
WHILE @@FETCH_STATUS = 0
begin
select @listvalues = @listvalues + ',' + convert(varchar(255),@value)
fetch next from @incrcurs2 into @value
end
CLOSE @incrcurs2
DEALLOCATE @incrcurs2
select @retlistvalues = @listvalues
go
declare @listvalues varchar(8000)
execute proc_list '1389',@listvalues output
print @listvalues
With Sybase, easily :
Select t.pub_id, list(t.title_Id) from publishers p, titles t where p.pub_id = t.pub_id
And I 've got all the titles in a comma-separated string by publisher !!!!
So, with SQL Server, I suppose that if I want the result by publisher, I must imbricate two cursors !!!
Perhaps I dream
Or can somebody see a better solution ????
Thanks
Axel Thimonier
How can I implement List on client which represent some SQL query with ability search through this list.
i.e. can I somehow get searched record and records near it (in different sort context) e.g. prev 10 and next 10?