I need to display the recovery mode of ALL databases on a server into a table. (Just like the sp_helpdb prcedure extended with the recoverymodel of each Database).
Can anyone give me a hint on this or provide me with a little tsql code snipplet to realize this?
Thanks alot in advance
I would like to provide users of a client program a list of databases on thenetwork that match a certain pattern, like "%frp%". I have seen a list ofdatabases in the Windows XP ODBC configuration tool. What I would like toknow is can I get that information through a query to one of the databases,or is there a control or application on the client machine that I can callto get the list?Does the thread "Databases not showing up in Enterprise Manager" refer towhat I am trying to do?Best regards,Steve Caldwell
View 5 Replies View RelatedWe have 3 replica AG setup. 2 replicas are in sync/automatic failover, the other(DR Server, different subnet) in asynchronous/manual mode…All these replicas were on sql server 2012, Recently we upgraded DR server to 2014. Since then we have a problem, the AG databases in 2014 instance went into ‘Synchronizing/ in recovery’ state…The SQL server error log has message, the recovery couldn’t start for the database ‘XYZ’…We tried to create a new database and add it to AG , it works for fine for other two 2012 replicas, but on 2014 we see the same issue
View 3 Replies View RelatedCan anyone please tell me of a way of generating a list of all user databases and their size with one command or view?
Thanks,
script to get the list of views in a database, involving tables from other databases?I AM using SQL server 2014
View 2 Replies View RelatedHello!
I make a full backup of many databases (about 45).
How can I recovery all databases at once? With a script?
I use SQL Server 2005.
Thanks
ezinsi
Greetings all and thanks for reading this post.
Here is my situation... I have 2 fairly large databases. Full backups are 83gb & 63gb. I am in the process of moving these database to a new data center. I've taken full backups of these databases and shipped them to the new center. I have been taking transaction log backups (larger db every 24 hrs smaller db every 15 min ... from log shipping).
I want to restore these databases in the new data center. I've gone ahead and restored the dbs in the new location.
Question final cutover.. can I just apply the transaction logs to the databases on final cut-over or do I have to restore the database backup first then apply the transaction logs?
Is there an other way to do this that I'm missing?
Thanks.
Kurt
I have log shipping enabled on databases(primary and secondary) and works fine. I need to implement TDE on the database. I have experience on implementing TDE on databases which are not used for log-shipping.steps needed to setup TDE which are involved with log-shipping.
View 2 Replies View RelatedHi
What are the pros and cons of putting the system databases in full recovery mode
I am asked by my manager to keep everything simple and uniform.We have all the user databases in Full recovery mode and he wants all the system databases as well to be full recovery mode.
I would like to get the points where in i can argue that, there is no point in having the system databases in full recovery mode.Unfortunately i dont see anything related to this in BOL or internet.
Plz help
Thanks
Sreenath
Hi All,I have a 2MB database set to SIMPLE recovery. This database is usedonly to generate new keys to web users. It has two columns - UID andLASTDATE. The UID column is only updated when users log in or log out(INSERT & DELETE). The LASTDATE column is updated every time theyswitch between pages.Please don't ask for the reason why we do it this way, it just IS.The maximum amount of rows in this table at any given time is about2000. There is a non-clustered index on the UID column.My problem is that all throughout the day I have constant blocks by theWRITELOG waittype. I know my disk I/O is very slow (will be upgradedsoon) but this is the only database on which these blocks occur. Whatis writing to the transaction log if I have the DB set for SIMPLErecovery?Thanks,Josh
View 4 Replies View RelatedWhen I create a database, is there a way to make sure that the default recovery model is Full instead of Simple?
View 1 Replies View RelatedHello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task manager on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task manager and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
SQL Server 2012: Out of all the databases in the instance we have a requirement in which we need to maintain a high availability for the databases around (128). Our team believed log shipping will apt for this requirement but not sure on it's limitations, how many databases are allowed or supports this log shipping from a single instance.
View 7 Replies View RelatedI believe to configure maximum number of replicas it is required to have 5 nodes (1 Primary & 4 Secondary replicas). But how many databases can be included in one availability group, it think it is 32767. When I am referring to below URL it is mentioned something like "An availability group supports a set of read-write primary databases and one to eight sets of corresponding secondary databases. " What does this 'sets' means, is that maximum limit for only eight databases or maximum groups should be eight?
[URL] ....
We have several read-only nodes in our AlwaysOn cluster, which are set to use Synchronous-commit mode, which ensures that the logs are updated on the read-only nodes before any update statements complete. Even with this option, if we query a read-only node before the logs have been processed, we can read old data. I would like to know a strategy to ensure that a read-only query will definitely return up to date information. I had an idea that if I just used a different transaction type, like Serializable, that it might block the read-only query from actually getting the data until after the log file was processed, but I have not tried it, yet.
I would like to move more queries to the read-only nodes, in an effort to offload CPU utilization from the primary node.
Hi all
What is best Disaster/Recovery methode to securing the system databases.
Master database allows only Full backup
MSDB allows Full ,Diff
How to find last login date/time for user DML acitivity on databases on Instance?
Is there any way we can find our the last login date/time for databases?
Note: 1. We can find if the SQL Trace is running and store.This is not good solution
        2. Audit logins off/on is also not good solution.
       3. Using DMV's also not good option, if reboot sql server instance then historical values can not see.
Hi ,
I have two servers, One is with per seat mode
another with per license mode.
when i am registering one server which is having per seat mode at one of
my client machine , it is giving u dont have license permission.
Can anyone suggest me regarding license modes if u have two servers.
thanku
rk
I have a table where each unique entry can have up to 12 'modes', each mode with a start and stop date. A mode is a certain type of characteristic attributed to an entry.
There are 60 different modes and a given mode number can appear in any of the 12 mode fields. I created a very simplistic example table below.
Criteria:
I need to find all entries that have any of the modes = 1
AND for any of the other mode fields = 2 or 3, all modes = 2 or 3 must have a mode_enddate that is NOT NULL.
example:
select * from #temp_work
where (mode1 = 1 or mode2 =1 or mode3 = 1 ...)
And if any of the other mode1-12 fields = 2 or 3 then all mode 2 or 3 mode_enddate must be NOT NULL. I have tried a few different ways to try and get this data, but none of them have been very good.
Create temporary table
create table #temp_work (
id int NULL,
mode1 varchar(20) NULL,
mode_startdate_1 date NULL,
mode_enddate_1 date NULL,
[Code ....
From this limited example, the only valid entry should be ID 1 as the mode = 3 has a NOT NULL mode_enddate.
ID's 2 and 3 both have mode_enddate_X that are NULL, so should not be included.
I have a question, I keep getting the warning where the lookup found duplicate reference key values when caching reference data. It also says to switch over to partial or no cache mode. I switched to partial and and it took way longer to run my package. I have around 200,000 records right now but this table will continue to grow. I guess my question is which mode should I be using? I have another table that will have millions of records in it.
thanks,
Hi, all experts here,
Thank you very much for your kind attention.
I am having a question on the SSAS2005 OLAP Cubes storage modes. We know SSAS2005 supports 3 different storage modes: ROLAP, MOLAP, HOLAP.
Do all these three storage modes of cubes store data in another physica analysis services databases which are inrelative from their data warehouse (in case they are built on top of the data warehouse)? (so it does not matter at all even we remove the data warehouse?)
Thank you very much in advance for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Hi, all experts here,
Thank you very much for your kind attention.
I am having a question on ROLAP and MOLAP storage modes. In ROLAP mode, we store all data in source relational databases and though then we can gain near real-time data for the queries. But with MOLAP and Proactive caching, we can solve this problem by setting update notifications to the MOLAP cubes. Also, with HOLAP, we can combine ROLAP and MOLAP (store leaf data in source relational database, while aggregations in MOLAP format), thus we can actually get the near real-time data for the queries as well once there is any changes to the underlying source relational database.
I am just a bit confused about the distinct benefts we can differenciate between these aspects regarding MOLAP with proactive caching and HOLAP. (not convinced about the reason to use ROLAP storage mode).
I hope my question is clear for your help and thanks a lot in advance for your advices and help for that and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
Hi everyone,
I wonder that SQL Server 2000 support the following lokc modes by default or not.
Shared (S)
Update (U)
Exclusive (X)
Query that show me a Products Tables and its models, 1 product could have 2 or more models
Example Table Products
id Name
1 Product 1
2 Product 2
3 Product 3
Example Table Models
idmodel idproduct model
1 1 Model 1
2 1 Model 2
3 1 Model 3
4 2 Model 1
5 2 Model 2
6 3 Model 1
And I want to show:
Product Model
Product 1 Model 1
Model 2
Model 3
Product 2 Model 1
Model 2
Product 3 Model 1
How can I query to show that?
Is there any way to change the AES mode in SQL server, to obtain the same ciphertext each time for the same plaintext?
View 3 Replies View RelatedWe have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies View Relatedis bulk logged recovery model support point in time recovery
View 9 Replies View RelatedPages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies View Relatedin the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.Â
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
Hi fellas.
I need you to answer a question:
What should I do and which SQL Server tool do I have to use in order to find a job listing on the database ?
Thanks in advance,
Abrahão.
I am trying to get the following code to work but I keep getting an error.
DELETE statement conflicted with COLUMN REFERENCE constraint 'FK__titleauth__title__060DEAE8'. The conflict occurred in database 'pubs', table 'titleauthor', column 'title_id'.
Has anyone else experienced a problem with this example? Let me know what is wrong
with it.
Thanks,
Ralph
<%@ Page Language="VB" Debug="true" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.SqlClient" %>
<script runat="server">
Sub Page_Load
Dim dstPubs As DataSet
Dim conPubs As SqlConnection
Dim dadTitles As SqlDataAdapter
Dim dtblTitles As DataTable
Dim drowTitle As DataRow
Dim objCommandBuilder As New SqlCommandBuilder
' Grab Titles Table
dstPubs = New DataSet()
conPubs = New SqlConnection( "Server='(local)';Database=Pubs;trusted_connection=true" )
dadTitles = New SqlDataAdapter( "Select * from Titles", conPubs )
dadTitles.Fill( dstPubs, "Titles" )
dtblTitles = dstPubs.Tables( "Titles" )
' Display Original Titles Table
dgrdOriginalTitles.DataSource = dstPubs
dgrdOriginalTitles.DataBind()
' Add a Row
drowTitle = dtblTitles.NewRow()
drowTitle( "Title_id" ) = "xxxx"
drowTitle( "Title" ) = "ASP.NET Unleashed"
drowTitle( "Price" ) = 1200.00
drowTitle( "Type" ) = "Mystery"
drowTitle( "PubDate" ) = #12/25/1966#
dtblTitles.Rows.Add( drowTitle )
' Delete the First Row
dtblTitles.Rows( 0 ).Delete()
' Double the price of the Second Row
drowTitle = dtblTitles.Rows( 2 )
drowTitle( "Price" ) *= 2
' Generate the SQL Commands
objCommandBuilder = New SqlCommandBuilder( dadTitles )
' Update Titles Table
dadTitles.Update( dstPubs, "Titles" )
' Display New Titles Table
dgrdNewTitles.DataSource = dstPubs
dgrdNewTitles.DataBind()
End Sub
</script>
<html>
<head>
<title>UpdateDataSet</title>
</head>
<body>
<h2>Original Titles Table
</h2>
<asp:DataGrid id="dgrdOriginalTitles" Runat="Server"></asp:DataGrid>
<h2>New Titles Table
</h2>
<asp:DataGrid id="dgrdNewTitles" Runat="Server"></asp:DataGrid>
</body>
</html>
Is there a way to list all table index in a user database? Not the system index.
View 2 Replies View Related