Load Table From Backup Error...
Jun 7, 2000
I posted this a while back with no responses...does anyone know of another SQL Server discussion site that I can post this question to? I'm still having problems.
TIA,Mike
----8<-----original post--------------
I'm receiving the following error at one of my production sites and can't determine the problem. I'm restoring one table to tempdb, but the LOAD command isn't finding the table definition/address information in SYSOBJECTS for that table. I've ran a dbcc checktable on sysobjects and it's fine. Any other suggestions? (FYI - there are some errors when running a checkdb, but none on sysobjects - a FIX_AL is scheduled to be run soon.).
THX,
Mike
------------------------------------------------------------------------
load table tempdb..acct_map_condition
from disk = 'd:mssqlackupcarman.dump'
with source = 'acct_map_condition'
Msg 4039, Level 10, State 1
Warning, file <1> on device 'd:mssqlackupcarman.dump' was dumped from database 'carman'.
Msg 8409, Level 16, State 1
Invalid source table 'acct_map_condition' specified in LOAD TABLE. Could not find table in SYSOBJECTS in dump. Table load has been aborted for table 'acct_map_condition'.
View 3 Replies
ADVERTISEMENT
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Jul 20, 2000
Is it possible to take a backup of a database and load it to another server?
I know the users id will be messed up. But, I don't want to do a detach
or a DTS task. I just want to verify that the backup is good.
thanks
View 1 Replies
View Related
Feb 24, 1999
Hi,
we have backups taken regularly on tape device.
When I restore the back up on the same server,it is working.
But if I try to resotre the same backup on a new server it is giving problems
I have the same configuration of the new and old server.
It is giving error 10005 DB process dead and after that the database is marked grey and in bracket (loading)
and a lot of other errors like Begin Stack Trace,
sympton dump created,end stack trace ,etc( A very Long List of errors) and a new dump is created in log directory
It is also telling "EXCEPTION_ACCESS_VIOLATION"
i am having the same problem on all the servers we have.
Help me regarding this.
DP
View 1 Replies
View Related
Dec 4, 2001
Anyone familiar w/ a utility/procedure which will allow me to:
LOAD a Sybase backup file (containing mulitple tables - tblA, tblB, tblC, etc) into a SQL Server database (tblA, tblB, tblC, etc)
Can DTS use a SYBASE backup file as input? (please elaborate)
(DB2 allows you to exec a LOAD utility using a backup file as input)
thx in advance,
BT
View 1 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
May 12, 2015
In Master tabel i have these date datas
2015-05-10
2015-05-11
2015-05-12
SO when i try to load from Master table to parent and child table i am using using expresssion like
select B.ID,A.* FROM FLATFILE_INVENTORY AS A JOIN DMS_INVENTORY AS B ON
A.ACDealerID=B.DMSDEALERID AND A.StockNumber=B.STOCKNUMBER AND
A.InventoryDate=B.INVENTORYDATE AND A.VehicleVIN=B.VEHICLEVIN
WHERE convert(date,A.[FtpDate]) = convert(date,GETDATE()) and convert(date,B.Ftpdate) = convert(date,getdate()) ;
If i use this Expression i am getting the current system date data's only from Master table to parent and child tables.
My Problem is If i do this in my local sserver using the above Expression if i loaded today date and if need to load yesterday date i can change my system date to yesterday date and i can run this Expression.so that yeserday date data alone will get loaded from Master to parent and child tables.
If i run this expression to remote server i cannot change the system date in server.
while using this Expression for current date its loads perfectly but when i try to load yesterday data it takes current date date only not the yesterday date data.
What is the Expression on which ever date i am trying load in the master table same date need to loaded in Parent and child table without changing the system Date.
View 10 Replies
View Related
Sep 24, 2015
I have a transaction table having about 40 crore rows in source. It don't have timestamp and unique key columns. It have only Bill_month and Bill_Year columns. Actually for loading this table into staging I have added a new datetime column by adding default bill_date as 01. Then
* First we delete last 3 month data from staging tables.
* Get last 3 months data from source table.
* Load that 3 months data from source to staging table.
We do this because we only get update for last three months data. Now I have to include this transaction table as Fact table in DW. What will be the best practice for loading the fact table by picking data form staging table. Also we have to look up with dimensions for Foreign Keys.
* Should I implement the same method of deleting last 3 months records and loading them again.
View 3 Replies
View Related
Aug 23, 2013
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
View 9 Replies
View Related
Feb 9, 2004
Hi,
I use the Transact-SQL BACKUP statement in Visual Basic to backup my local MSSQL Database. It give me this error
Error 3041
BACKUP failed to complete the command BACKUP DATABASE [BCFPC] to BCFPCBKP
I already created a backup device called BCFPCBKP and it is backup to the disk.
I tried to run the same BACKUP statement in SQL Query Analyzer and it worked fine. I tried to run my VB application in another PC. It worked fine when i use this command remotely. Can anyone tell me what's the problem?
Thanks in advance
regards,
M.Y. Yap
View 2 Replies
View Related
Aug 8, 2007
Hello,
I have MS SQL 2005 server with 300+ databases on it. The application is set up that way that it creates a new database as needed (dynamically). Do not ask me why - I hate this design... So, it can create 3-4 databases a day (random time).
I've scheduled full backup of all databases to run once at night, and it runs just fine. Besides that, I have scheduled tran logs backup of all databases to run every hour. This backup fails from time to time with the following error:
Executing the query "BACKUP LOG [survey_p0886464_test] TO DISK = N'D:\backups\log backups\survey_p0886464_test_backup_200708072300.trn' WITH NOFORMAT, NOINIT, NAME = N'survey_p0886464_test_backup_20070807230002', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "BACKUP LOG cannot be performed because there is no current database backup.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
So, I think what happens is since my full backup of all databases are scheduled to run only once at night, and tran logs every hour, when new database is created during the day, there is no full backup for it, that is why tran logs backup fails. Becuase after the failure, if I run full backup again, then tran log runs just fine afterwards.
I am new to MS SQL Server, I am mostly working with Sybase IQ. Do you know if I can "trigger" full backup every time when new database created to avoid tran lof failure?
Or is it possible to schedule full backup to run if tran log backup fails?
Any advice will be much appreciated.
View 1 Replies
View Related
Apr 23, 2008
Hello,
I would like to ask you if there is better to recreate database structure on 2005 from 2000 and move data or to just load
2000 backup.
Currently I loaded the backup, but I am wondering if there might be slightly better performance on 2005 when recreating structure on 2005 to loading 2000 backup?
Does loading 2000 backup create 2005 binary structure?
Thanks for help in advance
View 5 Replies
View Related
Mar 14, 2006
After working on this with no luck for a couple of days I am sick of pounding my head against a wall! I need help!! I am trying to load 3 flat files into one table and I am not sure how to do it using SSIS. I just need some guidence as to where to go. I can load 1 flat file into the table but 3 is the issue and combining the data so it is loaded in sequential rows. I have had it load, but it has been in three pieces one after the other. I am just not sure where to go and I really need some help! Thank you for any assistance or advice!
View 5 Replies
View Related
May 22, 2007
hi,
getting ORA-01722: invalid number error when running SQL 2000 DTS to Oracle 10g. This package works fine currently in production which is SQL 2000 and Oracle 9i.
We are going to 10g and in dev the DTS package giving us error:
Unknown provider error.
[OLE/DB provider returned message: [Microsoft][ODBC driver for Oracle][Oracle]ORA-01722: invalid number
OLE DB error trace [OLE/DB Provider 'MSDASQL' IRowsetChange::InsertRow returned 0x80040e03: Unknown provider error.].
please help
thanks
View 5 Replies
View Related
Jul 20, 2007
hii use sql 2000 server and windows 2003 standart server.i have problem, when i open the database in sql server,i see this error message"error 0: cannot load the dll, xpstar.dll .. reason 126"what can i do?thanks
View 1 Replies
View Related
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Nov 7, 2006
How can I load a table into memory in SQL Server 2000 or SQL Server 2005 ?
How can I keep the table always in memory in SQL Server 2005 ?
with all my thanks
View 4 Replies
View Related
Feb 15, 2000
I want to load a table from a file.
My file has a fixed length(fixed block) and have the same
fields of the table.
I need the right sintaxis, because The next with errors:
"load from file1 insert into table1"
ANY ADVICE will be greatly apreciatted because I'm not an
expert in databases. Thank you veru much.
Nauj
View 1 Replies
View Related
Mar 15, 1999
I thought I had posted this question already, but didn't see it in
the list. I apologize if this is a repost.
I am running SQL Server 6.5 SP 4.
I am attempting to load a single table from backup, but continually get
the error about schemas not matching. Interestingly, it comes back with
a status 4, and not the status 3 indicating a mismatch on Ansi_Padding.
The statement I am using is
load table demhist from internal_tape with file=5,nounload
I have tried creating the table from scratch and using select * into...
I have tried both above with both settings of Ansi Padding. The table
I am trying to load contaings char columns which allow nulls. I have
experimented with loading 2 other tables. One of the other tables loads
and one doesn't. The one which does not load also has char columns which
allow nulls, while the one that does load does not have char columns
which allow nulls.
Is it a known problem or limitation on the table load that it cannot reload
tables that contain char columns which allow nulls?
View 4 Replies
View Related
Feb 7, 2008
I am trying to load a table via SSIS from a text file (becdldep), which I have defined in the package as fixed width. The fourth column in my table is defined as decimal (6, 4) and the input is the six digits 246128. I get the following error message:
Error: 0xC020901C at becdldep to Securities, Securities [1006]:
There was an error with input column "Column 4" (1313) on input
"OLE DB Destination Input" (1019). The column status returned was:
"Conversion failed because the data value overflowed the specified type.".
When I define the column as float the value is accepted without an error but it is seen as 246128 rather than 24.6128. I could update the column with a divide by 1,000 but is there an easier solution?
View 3 Replies
View Related
Jul 14, 2013
I am getting the below error while loading the SSIS Package in SQL Server 2005
Could not load package " " because of error 0xC0014049.Description: Cannot find folder "" .
View 5 Replies
View Related
Aug 8, 2006
Hi,I'm running SQL Server 2000 on a Windows 2003 server. It's servingseveral small web site databases.About a month ago my automatic backups stopped working, and whenever Itry to edit or set up a new maintenance plan or export or import datathrough Enterprise Manager, I get the following error:Error 22272: Cannot load the DLL xpstar.dll, or one of the DLLs itreferences. Reason: 127(The specified procedure could not be found.).I've also tried doing these tasks with some third-party apps (EMS,Teratrax), and I get the same errors.I've Googled this but the two fixes I've read about (reinstalling MDACand reinstalling SP4) didn't work for me.I'm not sure what caused it -- probably a Windows update -- because Ididn't notice it until several weeks later.Any idea what I can do to fix this without completely reinstalling SQLServer? Its other functionality is unaffected; maybe it's a Windowsproblem?At a loss. Thanks.
View 3 Replies
View Related
Feb 22, 2007
I am trying to run an SSIS Package by using DTRun.exe this way
C:Documents and SettingsFahad>dtexec /SQL DataDownload /Conn "Data Source
=TriMurti;User ID=sa;Provider=SQLNCLI.1;Persist Security Info=True;Auto Translate
=False;Password=gamba" /U sa /P gamba
And the outcome of the command was
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 9:03:52 AM
Could not load package "DataDownload" because of error 0xC001000A.
Description: The specified package could not be loaded from the SQL Server database.
Source:
Started: 9:03:52 AM
Finished: 9:03:52 AM
Elapsed: 0.25 seconds
-----------------------------
Any help in this will sincerely be appreciated.
Fahad
View 8 Replies
View Related
Dec 28, 2006
HI,
Inside SSIS's Dataflow task, i'm getting data using ODBC connection(in DataReader Source) for an iSeries library and trying to insert that into DB2 database (using OLEDB destination ). Mappings etc work absolutely fine,but on execution get error as given below:
How do i resolve this error and load data in DB2 , Need help at the earliest.
Thanks in Advance
Amit S
Here is the ERROR Message:
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Reader to DB2, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Reader to DB2, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Reader to DB2, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Reader to DB2, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Reader to DB2, OLE DB Destination [12]: An OLE DB error has occurred. Error code: 0x80040E53.
Error: 0xC0047022 at Data Reader to DB2, DTS.Pipeline: The ProcessInput method on component "OLE DB Destination" (12) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Reader to DB2, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0202009.
Information: 0x40043008 at Data Reader to DB2, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Reader to DB2, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Reader to DB2, DTS.Pipeline: "component "OLE DB Destination" (12)" wrote 0 rows.
Task failed: Data Reader to DB2
SSIS package "Package.dtsx" finished: Success.
View 17 Replies
View Related
Apr 19, 2006
Hi does anyone know how to create a sql table and then import a list by just clicking on a button to call a procedure?CREATE TABLE clients(ClientID VARCHAR(5), ClientName VARCHAR(30), PRIMARY KEY (ClientID));LOAD DATA LOCAL INFILE 'C:/client.csv' INTO TABLE clientsLINES TERMINATED BY '
';
View 1 Replies
View Related
Mar 22, 2001
We are trying to load flat text files with upwards of 7 million records into a table on SQL. The table has a clustered index on 3 fields. We setup the indexes prior to importing the data. We are sometimes able to complete smaller tables (500,000-750,000 records), however when we try the larger tables an error occurs :
Error at Destination for row number 6785496. Errors encountered so far in this task: 1
Location: somerge.c:1573
Expression: mrP->mrStatus!=MERGERUN::NONE
SPID: 11
Process ID: 173
The destination row number is the same number as the total number of rows that we are trying to load.
None of the recods end up importing. The row number it gives is always the total number of records that was in the text file I was trying to import. I tried to import the text files first and then build the clustered indexes but a table with only 300,000 records ran for nearly 4 days without completing before we killed it.
Be for we try to load the file we always delete whatever is there. Some of the files that we try to load are new and we have to set up the indexes from scratch.
We are using a DTS wizard. Someone told me to find a way to get it to commit every 1000 or so but I can't find a way to do it. I looked and looked but can't find it !!!
Please help me on where to look......:(
Thanks,
Cheri
View 1 Replies
View Related
Mar 28, 2000
Since I have to go across the network, I'm trying to use the UNC. However, this won't even work when I'm using the UNC to point to the server on which this is run. I'm trying to restore a single table on 6.5. What is the obvious piece that I'm missing?
This works.
LOAD TABLE address
FROM DISK = 'd:MSSQLackupDBBackup.DAT'
WITH source='address'
This doesn't.
LOAD TABLE address
FROM DISK = 'server1d$MSSQLackupDBBackup.DAT'
WITH source='address'
View 2 Replies
View Related
Sep 27, 2004
:) I am trying to update my Dimention table during the load process with Last_Trans_Flag set to 'A' -active or 'I' -inactive. The Last_Trans_Flag for the new record being inserted is set to 'A' and the previous records for the customer are set to 'I'.
During the initial load of the SCD, the first occurrence of each customer will be set an 'I' flag and the most recent
customer with max(effective_date) will be set to 'A' .
I need the query to accomplish this. Thanks!
View 1 Replies
View Related
Nov 23, 2004
Does anyone have a script that analyzes primary and foreign key relationships of tables and produces a suggested load order based upon dependancies?
Thanks,
Fred.
View 4 Replies
View Related
Apr 8, 2008
I have a table having XML column. I want to read a XML document and insert content of the XML file into this xml column.
CREATE TABLE [XMLTest](
[DataAsXML] [xml] NULL,
[CreatedDate] [datetime] NULL
)
I have tried the following query
declare @filepath varchar(100)
declare @filename varchar(100)
set @filename = 'Referred'
set @filepath = 'D:ReportOutput'+ @FileName +'.xml'
print @filepath
insert into XMLTest
SELECT xCol,getdate()
FROM (SELECT * FROM OPENROWSET
(BULK @filepath,SINGLE_BLOB) AS xCol) AS R(xCol)
Problem is that When I give complete file path for BULK instead of variable name i.e. BULK 'C:Test.xml', query runs fine. But when I try to use @filepath, I get error "Incorrect syntax near '@filepath'." What am I doing incorrect? Also,If some one can suggest a better approach to load content of XML document to table?
Regards
View 2 Replies
View Related
Oct 30, 2014
I have a file which has * as the field delimiter and ~ as the record delimiter, but I don't know how much columns each row will have. Only known is the maximum which can be 15.
The file looks something like: A1*A2*A3*~B1*B2~C1*C2*C3*C4*C5~
SO I have created a table with 15 columns(since 15 can be the max) but now when I try to insert it to that table, I inserts only the entire file into 1 single column.
The command which I am using is: BULK INSERT tablename FROM filename WITH (FIELDTERMINATOR = '*' , ROWTERMINATOR = '~')
but this is not giving the correct output.
The output expected is
A1 A2 A3
B1 B2
C1 C2 C3 C4 C5
View 1 Replies
View Related
May 6, 2007
I m designing a table which will hold about 40 million records.
The data which is going to be inserted into the table is a alphanumeric unique code eg: (CABBXFGRET). Similarly there will be 40M codes, all are indexed starting with character 'C', with the second alphabet used as an index for about 5 million codes each.
Is it advisable to have 1 table and load all the records in it or is it more sensible to split the codes in to various tables based on index.
Eg: All codes starting with 'CA.....' till 'CC.....' in one table. etc.
So that the search logic can be designed based on the index of the code.
Logically considering this is helping us reduce the latency in search due to the heavy volume. But i m concerned that this doesnt follow the rules of normalization.
Any suggestions from the DB gurus out there is very much appeciated.
Thanks
sunil.
View 17 Replies
View Related
Mar 14, 2008
Do anyone know of an easy way to load the contents of a SQL script file into a NVARCHAR(MAX) column in a table?
It would be very handy to be able to do this so I can have SQL scripts loaded in a table and then execute them from a job.
Declare @MyScript nvarchar(max)
select @MyScript = MyScript from MyScriptTable where ScriptName = ‘MySQLScript’
execute ( @MyScript )
CODO ERGO SUM
View 5 Replies
View Related
