Loading 32 Bit Database Into A 64 Bit Database And Vice Versa
Oct 9, 2007
1. Is it possible and what would be the gotchas for taking a backup of a database in a 32 bit instance of sql server 2000 and loading it into a 64 bit instance of 2000? How about 2005 to 2005?
2. Is it possible to reverse that and go from a 64 bit to a 32 bit?
3. How about going from a 32 bit sql server 2000 into a 64 bit sql server 2005?
We're on the verge of upgrading a rather large database from sqlserver 2000 (32 bit) into 2005 (32 bit) but they anticipate eventually upgrading the hardware to 64 bit at least for production. The test node would remain at 32 bit.
Thanks for any help.
My asp.net website is using sqlexpress2005. I am planning to use sql2000 with this existing website. My questions:
1. How can I transfer the database definitions and actual data from 2005 to 2000? is this possible? 2. What if I have exisiting database in sql2000, can I convert it to be used in sql2005? 3. should I manually recreate the database when converting from one version of sqlserver to another? and how abt the actual data?
I work on the Clinical Surgery Department Data Application. The patient gets through the Admission, Surgery, PostSurgery and Discharge stages during his staying in the department. The Doctors just insert their medical data in to the different tables. I have three main classes: User, Patient and Portfolio ( patients portfolio ) and all the business bases on these classes. The problem is with the Classes per Medical Data Tables. The Medical tables should exist cause it includes the medical data about the patient however what is not clear: Whether I should create Business and Entity classes per each medical data table ( and this is something like 50 tables ) or I should insert all the functions in the Portfolio class and then there will be a mess of functions in one class? What is the accepted way to perform it ?
We have setup SQL Server 2000 32-bit (Publisher/Subscribers) replication with 5 different locations. We are planning to purchase SQL Server 2005 Enterprise Edition 64-bit and/or 32-bit. I need suggestion, if we have both version of 2005 Enterprise, can we setup replication with SQL Server 2005 64-bit with SQL Server 2005 32-bit? is that supporting?
Also can we run replication with SQL Server 2005 64-bit (Publisher) with SQL Server 2000 32-bit (Subscriber).
We were having problems setting up the mirroring, so I did it via command lines. I found out the "alter...set partnership" command works on the mirror server going to the principal, but gets a 1418 error when going from the principal to the mirror. So if A is the principal and B is the mirror, A to B fails but B to A works. If I reverse it so that B is the principal and A is the mirror, B to A fails and A to B works. Any suggestions?
Is there any equivalent function in T-SQL (SQL Server 2014 / SQL Azure)?
Specifically, I want to be able to convert a time into UTC before inserting it into a table. Right now I am doing:
INSERT INTO Incident (IncidentDescription, dtOccurred) VALUES (@IncidentDescription, DATEADD(hour, 8, @dtOccurred))
I don't want to hardcode "8" and I want it to adjust for daylight savings time (DST).
Is there any concise solution that does not require me to define SQL functions or have lookup tables? I also don't want to use the difference between GETDATE() and SYSUTCDATETIME(), because the timezone of my server is not my local timezone.
If I join Table1 to Table2 with a WHERE condition, isit the same if I would join Table2 to Table1 consideringthat the size of the tables are different.Let's assume Table2 is much bigger than Table1.I've never used MERGE, HASH JOINs etc, do any ofthese help in this scenario?Thank you
I am using SQL Server 2000.I have created a new database in Query Analyzer but I cannot see it inEnterprise Manager.I then created a new database in Enterprise Manager, but I can't see it inQuery Analyzer.How do I get these applications to see the databases that the other creates?Thanks,Greg
I gave the command to restore database and in the middle of recovery i canceled it. now the database is showing 'loading'. I am not able to do any thing to it.please suggest how to make it operational.I also want the data upto the time, I gave the command 'recover database'. thanks.
I have just restored one of my databases. Now, that database is no longer available to me. It has been marked as 'Database(Loading)'
I have reviewed and tried the suggestions given from previous posts of this same question, and they have not been successful (i.e. 'RESTORE DATABASE DPeople WITH RECOVERY' as well as re-restoring the database).
I have to load a 4 level XML file into Relational Database.
1. The input xml file contains a DTD definition reference. (Its an external file)
2. When tried using an XML source it prompts to set the prohibitdtd setting to false on xmlreader - How to do this.
3. I have primary keys (identity columns) - which are foreign keys in the next level and these primary keys can be generated only once I insert the record into the table. - What would be the best approach for this kind of Data transformations.
Helo i want to uplaod and doenload some image from database. For uploading the image i am doing the folowing things. and it is working fine i am using Input file of HTML shiiped with .NET and Image control of Asp.NEt
public void OnUpload(Object sender, EventArgs e){ // Create a byte[] from the input file int len = Upload.PostedFile.ContentLength; byte[] pic = new byte[len]; Upload.PostedFile.InputStream.Read (pic, 0, len); // Insert the image and comment into the database SqlConnection connection = new SqlConnection (@"server=NewSSA;database=iSense;uid=sa;pwd=pak"); try { connection.Open (); SqlCommand cmd = new SqlCommand ("insert into Image " + "(Picture, Comment) values (@pic, @text)", connection); cmd.Parameters.Add ("@pic", pic); cmd.Parameters.Add ("@text", Comment.Text); cmd.ExecuteNonQuery (); } finally { connection.Close (); }}
now my problem is i want to downlaod the uploaded image in to my image control for help thanks in advance sam
I canceled a restore job, and now the database is marked (Loading). When I go to propertied it tells me "database can't be opened, it's in a middle of a restore" Yet from a Query window I can connect and run queries against that database. Should I just wait until it finishes "Loading" or should I re-start the server? Thanks
while loading the transaction log dump on a 'STANDBY' database the connection got terminated. as a result the database was marked 'LOADING' and inaccesible. i would like to know if there is a way to get the db out of this mode without having to reapply a full database dump.
P.S. please ignore the previous two messages posted with the same subject line. i inadvertently pressed post twice. sorry for the spam.
I have a problem in restoring a Database. I have restored a database of size 25MB only onto a different database. This I have done through Query Analyzer not through Enterprise Manager. After restoration the database changed to Loading mode.
I thought it would take some time and change back to the normal mode. But in my case even after 24 hours database didnot change back to the normal mode. I am able to use database.
The following is the command executed through Query Analyzer,
RESTORE DATABASE Test FROM disk ='c:mssql7ackuphrmdump.dat' WITH REPLACE, MOVE 'Test' TO 'c:mssql7datahrm.mdf', MOVE 'Test_log' TO 'c:mssql7datahrm_log.ldf'
I am new at SQL and I have been asked to load some data into a database. I was given a file that has an extention .sql. shown below are the first few lines
This looks to me like it was built to be scripted in or use some function of SQL to create and populate the table... does that make sense? Anyway, is there an easy way to insert this data into a table?
I recently installed MSDE on a laptop. I then restored several databases from backup files without problem. However, one database is constantly stuck at the grey colour displaying the (Loading) message.
Why won't this database restore ? It is of course the most important database and I only have the one backup file.
This only appears to fail on his server. Do I need to uninstall MSDE and start over ?
Hi All:I need to make my database unavailable when i am loading the db. Thishappens daily and the db is not connected to any online app, to makethe app unavailable. It is queried thru an Access and hence availableall the time.The load happens daily for an hour in the morning.Is there anyway to make it inaccessible to users while loading dataand then make it accessibleThank youRS
Here's my delema, I have a file that's 308 bytes wide by 5.7 million records. The record length is fixed and the position and width of the known within the record. When I run DTS I recieve this error Msg MS DTS flat file provide and Err Diesdription: error creating file mapping view: not enough storage is available to process this command. Then when I try to continue with the wizard, it will not allow me to separate the data into the format that I need. Is there any other way to import this file using DTS?
I had to restore a database late this afternoon. I have the database set to FULL recovery. Database backups are performed nightly and transaction log backups are performed every other hour. I decided to perform a point-in-time restore. When I restored this way everything seems to go ok and it finishes. Then the database is grayed and says "Loading". Although I tried 4 separate times, one time allowing over an hour, the grayed out database and "Loading" never goes away.
Freaking out I deleted the "Loading" database (didn't delete logs and backup files) and tried a manual restore from the previous night's backup file. It attached and restored properly and was ready to go in 2 minutes.
Of course I wanted to get the transaction log files restored too, since it had work from earlier today. So I tried another restore via point-in-time and got the same old messages. Currently, the database is running with the previous night's backup restored but the users aren't too keen on having to do 5 hours worth of work to catch up to the previous transaction log backup come Monday morning.
Hi ,I have a file presumably backup of a User database from a SQLServer(2k) database. I want to load/restore that in a local SQL Serverto be able to see the table , views , etc present in the database.How do I do that ?Thanks,Arijit
I have a Excel cross-tab (multilevel column) report that need to be loaded into a database table. Currently, I am using a Excel macro that convert the columns into rows before loading into the database table. I was thinking whether there is a better way of doing this perhaps in SSIS or using XML.