Loading Data Using Ole Db Source With Input Source Being A View
Dec 13, 2007
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
View 13 Replies
ADVERTISEMENT
Feb 2, 2008
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
View 1 Replies
View Related
May 8, 2007
hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?
thanks for you helps
View 1 Replies
View Related
Sep 10, 2007
Hi i am trying to do a straight forward load from a Flatfile source , i have defined the columns according to the lenghts defined in the Data Dictionary Provided but when i am trying to run the Task i am encounterring this error
The column data for column "Column 20" overflowed the disk I/O buffer.
I tried to add another column 21 at the end and truncate or leave that column unmapped to destination but the same problem occurs for column 21 what should i do to over come this .
In case of Bad Data how to clean up the source.. Please help me with this
View 1 Replies
View Related
Sep 10, 2007
Hi i am trying to do a straight forward load from a Flatfile source , i have defined the columns according to the lenghts defined in the Data Dictionary Provided but when i am trying to run the Task i am encounterring this error
The column data for column "Column 20" overflowed the disk I/O buffer.
I tried to add another column 21 at the end and truncate or leave that column unmapped to destination but the same problem occurs for column 21 what should i do to over come this .
In case of Bad Data how to clean up the source.. Please help me with this
View 5 Replies
View Related
Feb 29, 2008
Each day I receive a file with a different name. For example, the name is filename_mmddyyyy.txt where filename_ stays constant and mmddyyyy is the date of the file. The file is always in the same format.
I want to build an SSIS where I pass it this file name. I can write a script to generate the correct file name. How do I build the SSIS so it can accept the input parameter and find the correct file to process?
Thanks
View 3 Replies
View Related
Mar 13, 2008
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
View 1 Replies
View Related
May 29, 2008
I have a fact table which is a custim query in the data source view, I process and work with the data, after somewhile I make some changes in the data source view query but all my changes does not reflect in the cube after processing the same old data returned.
please help ASAP, I want to fix this issue
View 12 Replies
View Related
Aug 2, 2007
Is it possible to use a stored procedure in a Data Source View? When I use the wizard to create the Datasource View, all it lets me choose is tables and views in the database. Am I missing something, or trying to do something that is impossible?
View 8 Replies
View Related
Apr 30, 2007
How does the report model know what data source view to use? I could not find it defined anywhere in the .smdl file.
My problem is this. I have a Report Model project with two data sources, two data source views and multiple report models. When I try and bind a data source to an entity in the report model I do not get to choose which data source view to use to choose what table/view I want to bind the entity too and only the tables in one of my DSV's shows up. When I first created it, it worked fine. It automatically selected the correct view and table and was successfully created but now when I open the project, that correlation is lost.
Any suggestions or help is appreciated, thanks.
View 1 Replies
View Related
May 9, 2008
Is there a limit on the number of fields that can be displayed in a table object in a data source view in SSAS 05?
One of the tables (the fact table) in my data source view is displaying only 50 fields. The table actually has many more than that. One of the fields that is not displaying is a foreign key that I need to link to a new dimension table. I have tried refreshing the view, but it doesn't bring in any additional fields.
View 10 Replies
View Related
Apr 3, 2007
only the tables and views are shown in the wizard (BIDS) thanks...
View 1 Replies
View Related
May 29, 2008
I would like to use a dynamic pivot table in my data source view. It seems that a named query can be only one sql statement. So, I cannot use my multi-statement procedure that creates a dynamic pivot table output.
What is the best course of action here? I could hard-code my pivot table query. I could maintain a redundant table in the pivot format. Do I have any good options?
KenS
Ken
View 1 Replies
View Related
Jul 6, 2007
We've built an oltp that uses nothing but synonyms that reach out to various DB's in the organization thru linked servers.
The issue that we are having is Data Source Views can only see tables and views. Is it possible to use synonyms? If not what would be a work around.
Please advise. Thanks
Steve
View 1 Replies
View Related
Jun 21, 2007
Hi,
Is it possible to do a cross database join in a report services data source view? It doesn't look like it.
If not I was thinking of linking the table into the other database.
TIA,
Darren
View 3 Replies
View Related
Nov 23, 2006
Hi, all here,
Thank you very much for your kind attention.
I got a quite a strange problem with Mining structure for OLAP data source though. The problem is: I am not able to edit the mining structure in the mining structure editor. The whole data source view within the mining structure editor is greyed. Could please anyone here give me any advices for that?
Thank you very much in advance for any help for that.
With best regards,
Yours sincerely,
View 5 Replies
View Related
Feb 22, 2007
I have an existing project with the data source and report folder with working reports. I need to create a model for other department members to use Report Builder, not Business Intelligence Developer Studio, to develop their reports from. How do I add a data source view and report model folder to the project so I can then create a view and model?
View 1 Replies
View Related
Jul 27, 2015
1. As per my current development SQL Sever Analysis Database consists of two Cube (Cube A and Cube B).  Cube A and Cube B share the same data source view (DSV1). The source for both these cubes has the same data source (DS1).
2. As per the requirement I need to create third Cube i.e. Cube C. Is it possible to create a second Data Source View (DSV2). The Source of second Data Source View (DSV2) will be the same data source(DS1).
I am thinking to create second Data Source View (DSV2) for Cube C because existing layout of the DSV1 has become complex. I wanted to know the pros and cons of creating a multiple data source view with same data source
View 3 Replies
View Related
Dec 15, 2005
hello ,
I want to download data from an AS/400 to a SQL 2005 Database.
Within Sql server 2000 it was possible to do more than 1 transformation with just 1 source connenction and 1 destination.
In SSIS I have created:
- new solution
- data source
- Data source viewer ( I made named queries to format the data as i want it to be in Sql)
Although it is possible to view the named query data it does not seem to be possible to import the data in the data viewer into my sql 2005 database. (For each dataflow I have to define each query again)
I have added the data source in the connection manager.
Also I am searching to import more than 1 file in 1 package !
I can use however a Dts-2000 package but why then use SQL server 2005
Hope somebody can help me
Regard,
Ronny
View 7 Replies
View Related
Jan 22, 2008
I created a data model for report builder. And since it wont let me use views, i tried to put all the tables im using in one of my already made views, to create a data source view like my sql view. But when i connect everything the same, my report model still doesnt narrow my search. I only want to see Breed information, but since i have a Breeder table,and Customer table, its showing me all customers, and not limiting it to the ones that are breeder customers.
heres the tables:
Code Snippet
FROM dbo.Tbl_Customer INNER JOIN
dbo.Tbl_Customer_Breeder ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_Breeder.Customer_Code INNER JOIN
dbo.Tbl_Customer_Detail ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_Detail.Customer_Code INNER JOIN
dbo.Tbl_Customer_Category ON dbo.Tbl_Customer.Customer_Category_Id = dbo.Tbl_Customer_Category.Customer_Category_Id INNER JOIN
dbo.Tbl_Customer_Classification ON
dbo.Tbl_Customer.Customer_Classification_Id = dbo.Tbl_Customer_Classification.Customer_Classification_Id INNER JOIN
dbo.Tbl_Customer_In_Breed ON dbo.Tbl_Customer.Customer_Code = dbo.Tbl_Customer_In_Breed.Customer_Code INNER JOIN
dbo.Tbl_Breed ON dbo.Tbl_Customer_In_Breed.Breed_Id = dbo.Tbl_Breed.Breed_Id
What am i doing wrong, and are there any suggestions.
View 6 Replies
View Related
May 23, 2007
I have a datasource view DSV1. It points to a datasource DS1 that is considered the "primary".
I have created a Report Model that uses DSV1 (and thus uses DS1)
I created a new datasource, DS2 that I would like to use instead of DS1. (I can't just modify DS1 because if I modify it, it will overwrite it when we go to our Production environment and break that datasource)
So, I can go into DSV1 and change all the references from DS1 to DS2.
But that's where the problem lies.
When I try to build, I get the following error:
"The Table property of the Entity "E1" refers to the Table "dbo_View", which is not in the primary data source."
Somehow, the entity is tied to the "primary" datasource. When I change it back to DS1, everything works fine. Any thoughts? What can I do?
View 1 Replies
View Related
Jan 9, 2007
Hi everyone!,
Our team is new to SSRS and we are trying to figure out how to refresh the data source view, autogenerate the corressponding report model and Re-Deploy the Report Model (rewrite existing Report Model) on the server on a periodoc basis or trigger the whole action whenever there is a change in the database on some specific tables.
We prefer to do this action through a Agent job ( a diff approach is also welcome).
Are there any stored procs out there?
Appreciate your time.
-PN
View 6 Replies
View Related
Mar 2, 2007
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
View 2 Replies
View Related
Apr 3, 2007
Thanks for any one can give me a help.
I am try to transfer some tables data from one database server into another database server. I create a package in SSIS, and I use a variable to pass each table name. In Data flow, I use a OLEDB Source, but I cannot set the Data access mode to Table name or view name variable. Ever time, I will get this following error info "===================================
Error at Data Flow Task [OLE DB Source [31]]: A destination table name has not been provided.
(Microsoft Visual Studio)
===================================
Exception from HRESULT: 0xC0202042 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowComponentUI.ReinitializeMetadata()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowAdapterUI.connectionPage_SaveConnectionAttributes(Object sender, ConnectionAttributesEventArgs args)".
Some one can tell me what is the reason, or give me some examples.
Thanks in advance.
View 7 Replies
View Related
Jul 14, 2015
How to set default values for selection list navigator without using parametrized queries for data source view.
View 2 Replies
View Related
Mar 21, 2007
Hi,
We implemented SSIS packages which read data from an operational system at our customers site. This system is one of the primairy systems used in the organisation and is vital to the organisation. In what situation ever the operational system shouldn't be affected in its operation by the SSIS packages. Unfortunately the following problems occur:
1. Sometimes a SSIS packages waits infinetly. We tried the 'with (nolock)' and 'with (readuncommitted)'' statement in the source query but without succes. The package just keeps on waiting and the SSIS proces won't finish. It seems the package is just sleeping without resuming.
2. On a specific day the operational system got disturbed and end-users couldn't proceed working because the application hang. According to the system administrators our SSIS package caused a lock on a table in the operational system. Which we find is a kind of strange because we use a simple 'select ... from with (nolock)' query.
We prefer not reading directly from the operational system so we adviced to bring in a mirror read-only database where the SSIS packages can read from. Unfortunately the mirror system will not be up and running within three months from now.
Anybody can advise me what to do because I am running out of options.
Thanks,
Marc
View 3 Replies
View Related
Dec 11, 2007
Today I was making a few reports.
When I tested the reports in Visual Studio, they worked great: I got the expected result.
But when I deployed the reports to our reportserver the problem started.
When I click on the directory in which my reports are deployed, I got my 4 reports.
Till now everything worked correct.
But when I click on a report to view the results it went wrong.
I got an error:
"Cannot create a connection to data source 'Live'"
(Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work.
I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works.
The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server.
Maybe that is the problem?
Can someone tell me what is wrong?
View 1 Replies
View Related
May 20, 2007
Hi there,
I'm trying to build a report for Windows Forms (C#) using .rdlc files.
But every time I run it, I get this error message. I've followed the step-by-step from MSDN instructions... but it doesn't work!
Could anyone help me?!
Tks a lot!
Luis Antonio - Brazil
View 1 Replies
View Related
Jan 11, 2006
Hello everybody,
I'm new using ASP 2.0, I was trying to find out how do i tell a SqlDataSource the parameters it will be using for the select query. I was looking at the Configure Data Source wizard and when I press the where botton to create the parameters, I do not know how two of the available Source selections work which are: (Query String, and Session). What I want to understand is how do I pass the parameter value during the form load like I used to do with ASP 1.1.
I used to write: during the pageload event:
me.dataAdapter.selectparameter("@param").value = [myVar]
me.dataAdapter.fill(Me.ds)
I tried to do something like this for the SqlDataSource but didnt work.
can anyone tell me how can I acomplish this?
thanks a lot.
Ed.
View 7 Replies
View Related
Dec 12, 2007
I am building an SSIS package that loops through a table in SQL Server and dynamically builds a select statement that i would like to use as an ole db source. I have been having a difficult time with this as the select statement that i am generating is over 200,000 characters long so using an sql variable is out of the question.
I ended up placing the select statement into a table where each row of the table represents a piece of the select. I then use an execute_sql task that selects the entire rowset from this table into a variable object. I then use a for each loop to shred the variable and concatenate it into on big string variable called user:: sql_statement that is my select.
After setting up the loop and testing to see if the user:: sql_statement variable populates correctly i then added a data flow transfer with an ole db source and destination. I then go into the advanced editor for the source and set it to accept an sql statement from a variable and use my user:: sql_statement variable. I was forced to set validate external metadata option to false to avoid an error since there is no way to validate the columns until the for each loop runs during run time.
Now thats all fine and good but what is causing my problem is that during run time, when the package gets to the data flow task, the select statement doesn't seem to be populating the input columns of the data source. I have been searching to no avail on a way to tell the data source to update the input columns but every time it gets there, the package bombs out telling me the ole db source has no available output columns.
Specifically the error i get is :
[DTS.Pipeline] Error: "output "OLE DB Source Output" (6616)" contains no output columns. An asynchronous output must contain output columns.
Any help with this would be much appreciated.
View 18 Replies
View Related
Dec 4, 2005
How can I run a single SP by asking multiple sales question eitherby using the logical operator AND for all the questions; or usingthe logical operator OR for all the questions. So it's alwayseither AND or OR but never mixed together.We can use Northwind database for my question, it is very similarto the structure of the problem on the database I am working on.IF(SELECT OBJECT_ID('REPORT')) IS NOT NULLDROP TABLE REPORT_SELECTIONGOCREATE TABLE REPORT_SELECTION(AUTOID INT IDENTITY(1, 1) NOT NULL,REPSELNO INT NOT NULL, -- Idenitifies which report query this-- "sales question" is part ofSupplierID INT NOT NULL, -- from the Suppliers tableProductID INT NOT NULL, -- from the Products table, if you choose--a ProductID, SupplierID is selected also by inheritenceCategoryID INT NOT NULL, -- from the Categories tableSOLDDFROM DATETIME NULL, -- Sold from which dateSOLDTO DATETIME NULL, -- Sold to which dateMINSALES INT NOT NULL, -- The minimum amount of salesMAXSALES INT NOT NULL, -- The maximum amount of salesOPERATOR TINYINT NOT NULL -- 1 is logical operator AND, 2 is OR)GOINSERT INTO REPORT_SELECTIONSELECT 1, 1, 2, 1, '1/1/1996', '1/1/2000', 10, 10000, 1 UNION ALLSELECT 1, -1, -1, 1, '1/1/1996', '1/1/2000', 10, 1000, 1You can ask all kinds of sales questions like:1-I want all employees that sold products from supplierID 1(Exotic Liquids), specifically the ProductID 2 (Chang) from theCategoryID 1 (Beverages) between Jan 1 1996 to Jan 1 2000 and soldbetween $10 and $10000 - AND for my 2nd sales question2-I want all employees that sold CategoryID 1 (beverages) betweenJan 1 1996 to Jan 1 2000 and sold between $10 and $1000I want to get the common result of both questions and find outwhich employee(s) are in this list.Here are some of the points:1-I want my query to return the list of employees fitting theresult of my sales question(s).2-If I ask three questions with the logical operator AND, I wantthe list of employees that are common to all three questions.3-If I ask 2-3-4. questions with the logical operator OR, I wantthe list of employees that are in the list of the 1st "successful"sales question (the first question that returns any employee isgood enough)4-You can ask all kind of sales question you want even if theycontradict each other. The SP should still run and returnnothing if that is the case.5-Let's assume you can have the same product name from the samesupplier but under different categories. So entering a ProductIDshould not automatically enter the CategoryID also; whereasentering the ProductID should automatically enter its SupplierID.6-SOLDFROM, SOLDTO, MINSALES, MAXSALES, OPERATOR are mandatoryfields, you can't leave them NULL7-SupplierID, ProductID and CategoryID are the dynamic inputparameters, there can be 5 different combinations to choose from:a-SupplierID onlyb-SupplierID and a ProductID,c-SupplierID and a CategoryIDd-SupplierID, ProductID and a CategoryIDe-CategoryID onlyf-Any time you choose a ProductID, the SupplierID valuewill be filled automatically based on the ProductID'srelationshipg-Any of the three values here that is not chosen by theuser will take a default value of -1 (meaning return ALLfor this Column, in other words don't filter by this column)The major problem I have is I can't use dynamic SQL for choosingthe three dynamic columns as the 2nd row of records would have adifferent selection of dynamic columns (at least I don't know howif the solution is dynamic SQL). The only solution I can think oflooks pretty bad to me. I would use a cursor, run each row at atime, store a TRUE, FALSE value to stop processing or not andstore the result in another detail table. Then if all ANDquestions have ended with TRUE do a union of all the result andreturn the common list of employees. It sounds pretty awful as anapproach. I am hoping there's a simpler method for achieving this.Does anyone know if any SQL book has a topic on this type ofquery? If so I'll definitely buy the book.I appreciate any help you can provide.Thank you
View 7 Replies
View Related
Jan 5, 2006
Hello,
I am trying to write my first couple Integration Services packages using SQL 2005. My configuration is a workstation running windows xp professional, and a windows 2003 server that is running the SQL server.
Anytime I run a package that accesses the remote server from my workstation, the job fails with an error code. The workstation cannot seem to run a package to load data to the remote sql server. Why is this? Is there a service pack, or hotfix coming out soon to correct this problem?
Additionally, I also seem to be unable to update a database using excel as the data source from which information should be used. If I import my excel spreadsheet into an access table, I can update the sql database from Access using integration services. Why can't I use an excel spreadsheet as the source? Is there a a service pack or hotfix coming out soon for 2005 sql that will correct this problem?
Thanks!
Jim
View 13 Replies
View Related
Aug 5, 2015
How to load .xlsb file using Excel source component in SSIS. Below is the connection manager i see in the properties window.
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=;Extended Properties="Excel 8.0;HDR=YES";
Do I need to change any values here to process .xlsb file
View 2 Replies
View Related
