Log Shipping Restore Fail
Nov 5, 2007
I am using sql 2000 standard. I set up log shipping 3 month ago it was working fine but yesterday its fail I got this error 4305. I don€™t know why this error I am getting
error messages:
failure /4305
activity : Load
[Microsoft SQL-DMO (ODBC SQLState: 42000)]
Error 4305: [Microsoft][ODBC SQL Server Driver][SQL Server]The log in this backup set
begins at LSN 7000000026200001, which is too late to apply to the database. An earlier
log backup that includes LSN 6000000015100001 can be restored.
[Microsoft][ODBC SQL Server Driver][SQL Server]RESTORE LOG is terminating abnormally.
View 3 Replies
ADVERTISEMENT
Nov 8, 2007
I am getting following error in windows event viewer so can u tell me how to slove this problem
1.The log shipping primary database Aric-PCSQL2005.AdventureWorks has backup threshold of 30 minutes and has not performed a backup log operation for 319 minutes. Check agent log and logshipping monitor information.
2.The log shipping secondary database Aric-PCDEVSQL1.AdventureWorks has restore threshold of 5 minutes and is out of sync. No restore was performed for 304 minutes. Restored latency is 15 minutes. Check agent log and logshipping monitor information.
View 1 Replies
View Related
Jul 14, 2007
Hi!
i have a question regarding tail log backup.
I have set up logshipping between primary and secondary servers. Now when i want to fail-over to secondary, I am planning to take the tail log backup on primary
backup log primarydb
to disk=N'..',
with norecovery
and then I will restore this tail log backup to secondary
restore log secondarydb
from disk=N'',
with recovery
Will there be any issue with this approach?
Will I be able to recovery the primarydb if i want to, in future? Taking tail log backup doesnt cause any issues? Or do i need to take the full backup of primary before I take tail log backup..in case if I can not recover the primary db after taking the log backup?
How big the tail log backup can be? Will it be of similar size of other normal transactional log backups.?
Any help would be appreciated.
Thanks
View 3 Replies
View Related
Jan 8, 2007
Posted - 09/07/2005 : 15:32:52
--------------------------------------------------------------------------------
Hi, i need help about restore a DB
I did a backup of a database using SQL Server Management Studio, but when i try to restore my database now, i get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'Athenas'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: The media set has 2 media families but only 1 are provided. All members must be provided. (Microsoft.SqlServer.Smo)
What do i doing so bad??
Thanks for ur opinions and help.
Regards
------------------------------------------
seyha moth
View 8 Replies
View Related
Sep 18, 2007
hi,
The log shipping between my 2 serves have failed. Can somebody please tell me the steps to follow in order to restore the log shipping between the two servers. I applied full backup. But restoring of transaction logs is failing, I am not able to figure out the cause for the failure
View 4 Replies
View Related
Aug 21, 2003
hello everybody
I have custom log shipping .
it run every 15 min
DB1 located on Server1
DB1 backup logs to server 2
DB2 located on server 3(300 km away from server1 and server 2)
Db2 restore logs from server 2
If server1 and server2 become unavailable
1.
Would enough login to server3
and
run
RESTORE DATABASE Db2
WITH RECOVERY
to bring db from read only to production mode up last restored log?
Thank you
Alex
View 1 Replies
View Related
Sep 20, 2007
I am trying to imitate a DR situation where the primary db is down and I need to recover the secondary db on another server. They are a log shipping pair and so to imitate a DR, I remove the log shipping in the primary server maintenance plan. Then I go to the secondary server and disable the log shipping jobs there and attempt to do the following
RESTORE DATABASE database_name WITH RECOVERY
but I can't get exclusive use because the database is in use. But I don't see any other users... am I wrong in thinking that the log shipping was completely deleted? Anything I can do to force exclusive access?
View 10 Replies
View Related
Aug 17, 2007
I have done a full backup on 3pm, and a differential backup on everyday 5pm.
I try to restore it back in my testing server and i encounter the problem in restoring the File3 and i try to restore the File 2 and it is okie. Can i know wat is the problem usually cause this error? Thank you
File 1: Full Backup
File 2: Differential Backup
File 3: Differential Backup
View 10 Replies
View Related
Nov 6, 2006
We're planning to implement log shipping on our databases, and I have been toiling with it all weekend trying to get it to work on some test databases. The result is the same whether I do it via the wizard or manually via T-SQL.
I am using 3 servers, all SQL Server 2005 Standard SP1. All 3 SQL Servers are configured identically.
When I setup log shipping, it initializes with no problems. When it processes the first tran log file, it restores it with no problem. Every successive log file thereafter is not restored. No errors are generated. The only outright indication of a problem is that the monitor server shows that there has not been a recent restore.
The backup and copy both suceed. The restore claims to suceed. If I review the job history for each step, it says that it skipped the log file and then reports that it did not fina any log files to restore.
Message
2006-11-06 05:00:01.92 Skipped log backup file. Secondary DB: 'MyDemo', File: 'D:MSSQLBackupMyDemoMyDemo_20061106115619.trn'
Message
2006-11-06 05:00:01.95 Could not find a log backup file that could be applied to secondary database 'MyDemo'.
2006-11-06 05:00:01.96 The restore operation was successful. Secondary Database: 'MyDemo', Number of log backup files restored: 0
Any ideas or suggestions?
View 3 Replies
View Related
Jan 28, 2008
Hi,
I have a weekly job that runs to execute msdb.dbo.sp_delete_backup_history on history older than 7 days on a server that is a log-shipping destination server. However, I have now noticed after putting a new deadlock alert, that this job causes RESTORE LOG jobs for all 6 of my log-shipped databases, which run every minute, to deadlock.
I am not concerned with the fact that the RESTORE LOG jobs are then chosen as the deadlock victims, as they will simply re-run in the next minute anyways.
What I would like to do though is to somehow lock all the tables being cleared by sp_delete_backup_history, so that the restore jobs are forced to wait or fail without causing a deadlock to appear. I was wondering if I could do this via setting the job which runs sp_delete_backup_history to use serializable isolation level, or would that cause other problems/issues? If not that, would setting the deadlock priority level to high prevent deadlocks, or just simply force the restore log jobs to be chosen as the victim?
The main thing is that I would like to stop being "annoyed" by the deadlock messages being generated.
Any comments would be appreciated.
Regards,
Diane.
View 2 Replies
View Related
May 13, 2007
Hi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Is there any possibility of loosing data ?
Thanks
View 1 Replies
View Related
Jun 8, 2006
Hi,
I 'm sure I am missing something obvious, hopefully someone could point it out. After a failover log shipping, I want to fail back to my inital Primary server database; however, my database is marked as loading. How can I mark it as normal?
I did the failover as follow:
I did a failover log shipping from the 2 server Sv1 (Primary) and Sv2 (Secondary) by doing the following
1) Stop the primary database by using sp_change_primary_role (Sv1)
2) Change the 2nd server to primary server by running sp_change_secondary_role (Sv2)
3) Change the monitor role by running sp-change_monitor_role (Sv2)
4) Resolve the log ins - (Sv2)
5) Now I want to fail back - I copy the TRN files to Sv1 - use SQL Ent to restore the database at point in time. The task is done; however, the database is still mark as loading. I could not use sp_dboption.
I appreciate any suggestion.
Thanks in advance
View 5 Replies
View Related
Oct 29, 2015
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies
View Related
Dec 31, 2014
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
View 6 Replies
View Related
Jun 25, 2015
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
View 4 Replies
View Related
Jun 30, 2006
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
View 3 Replies
View Related
Apr 27, 2007
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
View 4 Replies
View Related
Jan 4, 2007
Hi y'all,
I'm facing a database data transmission problem during synchronysing. When dts fails i need a better solution instead inconsistent data.
I'm looking for data comparer for sql server where i have total control of my actions.
Any suggestions.
THanks in advance!
View 2 Replies
View Related
Nov 7, 2001
Can anyone direct me to a good resource for setting up SQL2k in a failover cluster. I am trying to do this without a shared disk array, and need more info.
Thanks.
View 2 Replies
View Related
Dec 13, 2004
Does anyone know of a Fail Over Document for SQL Server 2000 Enterprise edition?
View 1 Replies
View Related
May 19, 2008
HI Friends
One of server my job is getting fail. It will showing log speace is full but log speace is 24GB But actually my log file actual speace is 30GB How can i handile this isssue plz help me urgent
Thanks
MS
View 9 Replies
View Related
Jun 22, 2006
Hi
I have scheduled a job and the job is getting failed.I have scheduled two DTS packages in the job.But when I run the DTS Packages separately its running fine without throwing any errors.But when the Job fails I am getting the error message like "Dts package not found"
The error message which I am getting while the Job fails is
"Executed as user: TESTsqlservice. DTSRun: Loading... Error: -2147217900 (80040E14); Provider Error: 14262 (37B6) Error string: The specified DTS Package ('Name = 'DTS_MASTER'; ID.VersionID = {A35AEABF-8F05-41B5-A4C9-47F57A3208B9}.{[not specified]}') does not exist. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed. "
Can anybody pls help me on this.
View 1 Replies
View Related
Jul 19, 2000
how do i fix this? syntax pls!!
There was a problem running the DBCC.
SQL Server returned the following error message:
Table Corrupt: Object ID 213575799, index ID 2, page (1:951), row 68. Test (ColumnOffsets <= (nextRec - pRec)) failed. Values are 21 and 0.
View 2 Replies
View Related
Nov 26, 2007
I am trying to set up a DTS to transfer logging data from one server to another.
The record may already exist at the destination causing a primary key violation. I do not want this error to cause the entire DTS to fail.
When I execute the DTS I created by right clicking and selecting "Execute Package" it shows me 2 errors. Although there are 2 errors the rows that do not have a primary key violation are successfully transfered to the destination database.
Here are the 2 errors I see:
Error 1:
Error at Destination for Row number 97. Errors encountered so far in this task: 97.
The statement has been terminated.
Violation of PRIMARY KEY constraint 'PK_event'. Cannot insert duplicate key object 'event'.
Error 2:
Error at Destination for Row number 198. Errors encountered so far in this task: 198.
The statement has been terminated.
Violation of PRIMARY KEY constraint 'PK_eventDetail'. Cannot insert duplicate key object 'eventDetail'.
These errors make sense, there were 97 duplicate lines in the event table and 198 duplicates in the eventDetail table.
This is the behavior I want. New rows are copied to the destination database.
When I schedule the DTS as a Job in the Enterprise manager things change. When the DTS is executed as a Job (as opposed to me right clicking and selecting "Execute Package"), the job reports a failure and none of the new rows are transfered to the destination database.
Why does the DTS transfer the rows that do not violate the Primary Key constraint when I manually execute it and not when it is executed as a job?
How can I get the DTS to function as desired?
Thanks,
Andy
View 1 Replies
View Related
Oct 8, 2004
Hi,
i m facing this error when running DTS on IDENTITY(1,1) Field.
how can this field increment automatically ???
Step Error Source: Microsoft Data Transformation Services (DTS) Data Pump
Step Error Description:The number of failing rows exceeds the maximum specified. (Microsoft Data Transformation Services (DTS) Data Pump (80040e21): Insert error, column 14 ('s_no', DBTYPE_I4), status 10: Integrity violation; attempt to insert NULL data or data which violates constraints.) (Microsoft OLE DB Provider for SQL Server (80040e21): Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.)
Step Error code: 8004206A
View 11 Replies
View Related
May 19, 2008
I'm trying to get a job to fail using a stored procedure command.
I have been using:
EXEC sp_stop_job @job_name = 'Archive Tables'
But this command only cancels the job, I want to the job to report back a failure.
Is there a sp_fail_job, or a sp_quit_job or something?
Thanks in advance
View 14 Replies
View Related
Nov 13, 2007
i tried to install sql 2005 and first time succesfully, but not able to see "Enterprise" manager even during installation i select all features.i was told unstall Visual Studio MS Express and try again. it didn't work neither. in the end i have unstalled SQL, Express SQL from Visual Studio, delete SQL from Programm Files and even clean up register still the same problem. am i doing something wrong?
thank you
View 9 Replies
View Related
Jul 23, 2005
Hi,Is it possible to somehow set a SQL Server DTS job to automaticallydisable itself, when it encounters a fail, so that future scheduledoccurrences don't happen until the problem has been fixed?I've hunted about for this on the web, but drawn a blank unfortunately!Many thanks if anyone can help at all.
View 2 Replies
View Related
Jul 20, 2005
I had link my 4 of workstations to server with MySql.1 pc of my pc can run a software which can update MsSql perfectly but notothers(3 failed).I tried to add System Dsn data source for Control Panel - Odbc data source32.The pc which working fine with the software function but 3 of the rest not.My pcs running xp and win98 !Regards.Thanks.Leslie Lim
View 5 Replies
View Related
Jul 20, 2005
Hi,In case of failover to standby server, what is theest way to redirectclient applications to new server?1) DNS name change -- not viable due to Caching issue.IS there any alternate like Oracle's onames/LDAP for resolving namewith sql server?Can use Sever alias?Thanks
View 6 Replies
View Related
Nov 27, 2006
I have several packages that I download files using a sql task (I cmd shell out). I use sql task because the file names change everyday. what I want to know is how can I check to see if the file I downloaded exists either within the same task (preferred) or a task right after?? I want to fail the package instead of letting it get into the actual loading of the file where it now fails at.
I hope this makes sense.
View 5 Replies
View Related
Aug 24, 2006
Hello,
I'm using SQL Reporting services 2000 SP2.
I create a report and when i select pdf format in the export dropdownlist and i click on export, a popup (open/save) appears but when i click ok, i've an error message : "IE can't download Format=PDF of IP_ADRESSE".
If i do the same thing with excel type in the dropdownlist it works!
Do you know why?
View 7 Replies
View Related
Apr 18, 2006
Hi, sorry again, l've a package which call the FTP tasks. In design-time, it works fine. While l put it into SQLAgent to run in schedule. It fails. The package log file said,
OnError,MAXIS-SYSOPT,NT AUTHORITYSYSTEM,FTP Raw File Motorola,{b3b941f5-ebc2-4b38-b314-87ff4827c2a8},{E93D51C5-539E-4CEE-B616-BBCFF9FA813E},4/18/2006 3:18:23 PM,4/18/2006 3:18:23 PM,-1073573489,0x,Unable to connect to FTP server using "Metrica FTP".
Does anyone know what's happening?
View 7 Replies
View Related
