Log Shipping Will Not Restore Tran Logs On Secondary Server
Nov 6, 2006
We're planning to implement log shipping on our databases, and I have been toiling with it all weekend trying to get it to work on some test databases. The result is the same whether I do it via the wizard or manually via T-SQL.
I am using 3 servers, all SQL Server 2005 Standard SP1. All 3 SQL Servers are configured identically.
When I setup log shipping, it initializes with no problems. When it processes the first tran log file, it restores it with no problem. Every successive log file thereafter is not restored. No errors are generated. The only outright indication of a problem is that the monitor server shows that there has not been a recent restore.
The backup and copy both suceed. The restore claims to suceed. If I review the job history for each step, it says that it skipped the log file and then reports that it did not fina any log files to restore.
Message
2006-11-06 05:00:01.92 Skipped log backup file. Secondary DB: 'MyDemo', File: 'D:MSSQLBackupMyDemoMyDemo_20061106115619.trn'
Message
2006-11-06 05:00:01.95 Could not find a log backup file that could be applied to secondary database 'MyDemo'.
2006-11-06 05:00:01.96 The restore operation was successful. Secondary Database: 'MyDemo', Number of log backup files restored: 0
Any ideas or suggestions?
View 3 Replies
ADVERTISEMENT
May 29, 2008
hi all,
For data ware house project, the reporting team needs to know the delta changes to the master database.
one way we were thinking was to use log shipping and run reports / ETL off the secondary server. But the team needs to know which records got changed and i was thinking of adding timestamp columns to the necessary tables (only on the secondary database schema) and that way we can track the changes.
But from my research, it seems like secondary database needs to have similar schema as promary database.
Is log shipping, can my secondary db have a bit different schema? if so how to do it?
If not, how to accomplish the above secanrio, with out adding new columns (if possible) in the master database and with low over head.
thanks
lucy
View 3 Replies
View Related
Oct 2, 2006
Hi,
We have SQL Server 2005 configured with mirroring to protect from physical errors. We also have a need for an (out of sync is ok) reporting server and we'd like to reduce our downtime in the event of a logical error.
The primary database is already being backed up (full and t-logs) to a shared network drive.
Can I implement the second half of log shipping (i.e. the stuff you do to the secondary) so that I don't have to change the current backup schedules on the primary server?
Specifically in the list of sp's below, can I start halfway down at sp_add_log_shipping_secondary_primary (Transact-SQL) ?? Without having to run the primary sp's?
sp_add_log_shipping_primary_database (Transact-SQL)
sp_add_jobschedule (Transact-SQL)
sp_add_log_shipping_alert_job (Transact-SQL)
sp_add_log_shipping_secondary_primary (Transact-SQL)
sp_add_log_shipping_secondary_database (Transact-SQL)
sp_add_log_shipping_primary_secondary (Transact-SQL)
Or do I have to ditch my current backup maintenance plans on the primary and start again?
Thanks
Ed
View 1 Replies
View Related
Jan 14, 2008
Hello
We have set up Log shipping between Primary and Secondary DB. The secondary DB is right now option: Standby/Read-Only. I can not take Backup of Secondary DB now.
Shall we disable Log shipping and change the DB Option to Multi-user mode and take backup? or any different method, without disabling log shipping?
please advice. Thanks in advance.
Jay
View 1 Replies
View Related
Dec 29, 2007
I made B server which get logs from primary server A as a secondary server in the log shipping solution.
it always shows RESTORING in B server, it seems not to accessible.
my question is <if A failed down , how to revoke the B server as the primary one>
View 3 Replies
View Related
Feb 13, 2008
I have setup Log shipping between two SQL 2005 servers, and everything seems to be working well. The files are transferring and restoring correctly.
My question is whether I need to add any backup procedures for the secondary server to prevent the secondary server's log file size from growing continuously. Should I be doing a transaction log backup on the secondary server? Or will that break the Log chain?
If it makes a difference, the secondary server is in Standby mode after applying the logs.
Any advice would be appreciated,
~ Michelle
View 4 Replies
View Related
May 12, 2008
We are using MSSQL 2005 and Log Shipping.
After making our secondary SQL server primary, how can we put the secondary SQL server back into standby mode?
View 1 Replies
View Related
Jun 3, 2015
I checked the server and found that LS restore job failing and Backup and copy jobs running fine without any issue. and also observed that Copy folder the trn file existing on secondary server. i try to restore trn file im getting the error. and observed that last log backup file that it restored at the secondary database on May2nd,2015.
2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored.
From Restore job histort details below.
Message
2015-06-02 12:25:00.72*** Error: The file 'xxxx\_20150530104503.trn' is too recent to apply to the secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) ***
2015-06-02 12:25:00.72*** Error: The log in this backup set begins at LSN 761571000000022500001, which is too recent to apply to the database. An earlier log backup that includes LSN 721381000002384200001 can be restored.
RESTORE LOG is terminating abnormally.(.Net SqlClient Data Provider) ***
2015-06-02 12:25:00.73Searching for an older log backup file. Secondary Database: 'database'
2015-06-02 12:25:00.73*** Error: Could not find a log backup file that could be applied to secondary database 'database'.(Microsoft.SqlServer.Management.LogShipping) ***
2015-06-02 12:25:00.74Deleting old log backup files. Primary Database: 'database'
View 3 Replies
View Related
May 5, 2015
We tried to configure log shipping using script generated by GUI and when executed specific script which is meant for secondary server the database is not created and threw below error.
Msg 15010, Level 16, State 1, Procedure sp_add_log_shipping_secondary_database, Line 50
The database 'BUBALLO' does not exist. Supply a valid database name. To see available databases, use sys.databases.
Note: Only Copy, restore and alerts jobs have been created.
The account I'm trying to configure log shipping is the service account by which SQL and agent services are running and folder in where data and log files are intended and to be created is open to all (everybody has read/write permissioins) believe the issue is not with permissions.
View 4 Replies
View Related
Apr 24, 2007
I set up Log Shipping with just 2 servers primary and secondary. When I run from the Wizard for the very first time keeps failing at the stage of saving Secondary Server Configuration info. When i instead run the generated script this problem disappears but then restoring of transactions fails - the process can backup transactions from the Primary server , copy them accross to the secondary and fails on the restore. Any ideas why.
View 6 Replies
View Related
Oct 19, 2000
What is the advantage of taking frequent tran log backups (say every 30mins) as opposed to once a day? Say, I backup data and tran log once every night and I lost a table at 10:00am next day. Can't I recover the database to the point in time by restoring the previous night's backup and then applying the transaction log from previous night and then applying the transaction log (to the point int time) that you just dumped when the mishap was reported to you?
Thanks
View 2 Replies
View Related
Jan 22, 2001
I have recently implemented a backup solution that keeps our standby server up-to-date with nightly database backup and restores. Ironed out all the problems with syslogins and orphan users. It's been working very well over the past few weeks.
On the production server we do hourly tran log dumps every hour between 8am and 10pm. I would like to implement some form of "log shipping" to bring the window of vulnerability down to 1 hour. By making some alterations to my current process I been able to incorporate the hourly log dumps in the same process.
However, when I try to restore the log on the standby servre I get the following message,
Server: Msg 4305, Level 16, State 1, Line 1
Specified file 'HODB1SQLBACKUPRace_Prd_T_dump.200101231513' is out of sequence. Current time stamp is Jan 23 2001 2:01PM while dump was from Jan 23 2001 3:01PM.
After a bit of investigation I found the dumptrdate field in the sysdatabases table and it was set to Jan 23 2001 14:01. After updating this field to Jan 23 2001 14:01, I ran the load command again but received the same error message.
Is there something else that needs updating on the standby server? Is what I'm trying to do possible in 6.5? Any help or ideas would be greatly appreciated.
Thanks
Phill
View 2 Replies
View Related
Mar 28, 2002
I noticed our log files are getting way too big. I found that a previous
SQL guy had set up the following scheduled job with the TSQL statement:
BACKUP LOG DEV TO DevDailyTranLog with noinit
This runs every 20 minutes.
There's also a Maint Plan to do a Complete backup every night and a
Transaction Backup every hour (could be set to 20 min)
Why do you suppose the BACKUP LOG job exists ? If the maint plan were
set to backup transaction every 20 min, wouldn't the 2 jobs be
duplicating each other ?
Also, I notice that the Tran Logs specified in the database properties
seem awfully big (4 gig), shouldn't they automatically be truncated when
the daily full backup occurs ? (full recovery model)
Feel free to call me and straighten me out or to get more info.
Win2K, SQL 2K
gdunn@taunton.com
203-426-8171 x 374
View 2 Replies
View Related
Jun 21, 2004
Hi experts,
Pls let me know , how to make normal db to readonly + accept tran logs
Rgds
Srinivas Varanasi.
View 2 Replies
View Related
Mar 27, 2007
Has anyone been able to successfully delete old backup files(*.bak) and tran logs (*.trn) TOGETHER using maintenance plan cleanup task in SQL 2005 SP2.
this is transact sql running in the back ground.
EXECUTE master.dbo.xp_delete_file 0,N'F:MSSQL.2MSSQLBackupibmdir',N'"bak" & "trn"',N'2007-03-26T22:21:14',1
This DOESNT WORK.
It works if I just try to delete only one of the things ie trn or bak files.
EXECUTE master.dbo.xp_delete_file 0,N'F:MSSQL.2MSSQLBackupibmdir',N'bak',N'2007-03-26T22:21:14',1
But is there a way to delete both bak and trn files using one task ?
View 5 Replies
View Related
Jun 26, 2007
Good day to the people who's reading this post!
I have some trouble with shipping my transaction logs to the secondary database be it on
another server or within the same server to another database instance.
Im using SQL Server 2005 workGroup editions with Service Pack 2.
Here are the problems that i encountered.
I do hope someone has bumped into such a problem and willing to help me out.
I tried on 2 separate servers (not domain environment) and also between 2 separate instances
(which is supposed to be simple!) on
our development server,but was unsuccessful.
Between 2 separate instances on the development server -
No error after configuring Log shipping though.
The configuring went through and it was a success.
Transaction logs was backup every minute and it got copied over to the other folder.
But SQL Agent not doing its last job which is supposed to restore to the secondary database on
another instance.No errors given out in SQL Agent error log files.Anywhere else im supposed to
look to see if there are errors given out?
Both instances SQL Agent has the same log on username and password with Administartive rights
So what went wrong?
Between the 2 servers-
The transaction logs was backup every 1min on the primary server
but it didn't got copied over to to the secondary database.
- Error message given was:Error in restoring database to the secondary
database.Network path given could not be found. Can't open the AxTest.bak file.
(i am very sure i have type the correct network path,even have shared it out and i think the firewall
is blocking incoming traffic since unlike our development server,
which allows us to access when we use Start>Run and type in the ip address,user name
and password,the primary server will only tell me no network path was found)
I also believe it's because the SQL Agent on the secondary database server wasn't given
permission to access the primary database folder.
I've shared out the drive and folder on the secondary server and
even have allowed SQL Agent to read,write and modify on both servers.
For the primary and secondary SQL Agent,
I configure their log on to be the same user account name and password
which have administrative rights.
So what went wrong?
Isit really true that both servers have to be in domain environment before you can configure log
shipping,mirroring and replication?
Hope someone help me out of this predicament.Thank you in advance!
View 6 Replies
View Related
Aug 4, 2015
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
View 7 Replies
View Related
Sep 5, 2015
I want to configure the logshipping to secondary database.
Already the primary database transaction log backup running every 15 minutes through (maintanance plan)
I want to skip the transaction log backup job in logshipping configuartion(disable the job)
want to use the existing transaction log backup and copy and restore in secondary using logshipping configuration
is it possible in sql 2008 r2 standard edition.
View 1 Replies
View Related
Apr 23, 2008
I am new to this environment and was asked to ensure that the transaction log shipping for SQL 2005 on W2K3 boxes is working properly. I noticed the db's on the secondary server are show "Restoring..." I am not sure if these were set up in No Recover Mode or Standby Mode. I have no access to the secondary db's. I get an error message when trying to access them (error 927). Monitoring was not set up initially and as you may or may not know can't be turned on after the fact...unless you delete the job and start over.
My question is is "Restoring..." normal and what does it indicate?
View 3 Replies
View Related
Apr 19, 2006
Dear All
Please I need an urgent help
After i finished all Transaction Log Shipping Configuration.
I tried to use the database in the secondary database but i couldn't access it
i saw it in SQL Managment Studio as (Restoring......)
i tired to make a database snapshot from it , i had a message
Msg 1822, Level 16, State 1, Line 1
The database must be online to have a database snapshot.
Please urgently
View 1 Replies
View Related
Dec 13, 2006
Hi,
I am trying to implement a log shipping scenario in sql 2005 where the secondary server is in standby mode with the ability to roll change during failover.
With the help of BOL (ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/udb9/html/2d7cc40a-47e8-4419-9b2b-7c69f700e806.htm) I can implement my scenario in Recovery mode, but not in standby mode. I use the following sql to put my primary in standby
BACKUP LOG [database]
TO DISK = @filename
WITH STANDBY = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupROLLBACK_UNDO_database.BAK'
GO
which works, but then my restore job fails on the last step. How can I put my primary db in standby mode in such a way that the log shipping restore will work?
Thanks
Andy
View 6 Replies
View Related
Mar 17, 2014
I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
Example:
(Primary) servername=prodSrv, DBname=aquaDB, Actual_Path=G:aquaDB, SQL-studio-Properties-Path=G:AquaDB, sys.master_files Path=G:AquaDB,
Log shipped to
(Secondary / Read Only) servername=DRSrv, DBname=aquaDB, Actual Path=F:aquaDR, SQL-studio-Properties-Path=G:AquaDB(WRONG), sys.master_files Path=F:aquaDR
View 2 Replies
View Related
Jun 18, 2015
I received an alert from one of my two secondary servers (all servers are running 2012 SP1):
File 'E:SQLMS SQL ServerMSSQL11.MSSQLSERVERMSSQLDATAMyDatabaseName_DateTime.tuf' is not a valid undo file for database 'MyDatabaseName (database ID 8). Verify the file path, and specify the correct file.
The detail in the job step shows this additional information:
*** Error: Could not apply log backup file 'MyDatabaseName_DateTime.trn' to secondary database 'MyDatabaseName'.(Microsoft.SqlServer.Management.LogShipping) ***
*** Error: Table error: Page (0:0). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1.
Table error: Page (0:0). Test ((m_type >= DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 0.
Table error: Page (0:0). Test (m_freeData >= PageHeaderOverhead () && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192.
Starting a few minutes later, the Agent Job named LSRestore_MyServerName_MyDatabaseName fails every time it runs. The generated log backup, copy, and restore jobs run every 15 minutes.
I fixed the immediate problem by running a copy-only full backup on the primary, deleting the database on the secondary and restoring the new backup on the secondary with NORECOVERY. The restore job now succeeds and all seems fine. The secondaries only exists for DR purposes - no one runs reports against them or uses them at all. I had a similar problem last weekend on a different database that is also replicated between the same servers. I've been here for over a year, and these are the first instances of this problem that I've seen. However, I've now seen it twice in a week on the same server.
View 0 Replies
View Related
Feb 22, 2004
Hi,
We currently have a couple a large Databases running on SQL 2000 SP3 Clustered Windows 2000 SP3 environment.
Log Shipping is enabled for both databases shipping to a Standalone SQL 2000 SP3 Windows 2000 SP3 box.
Log Shipping occurs every 15 mins with the Transaction Files on average being no more than 500KB in size. However, every now and then a Transaction Log comes through and it can be as big as 3.52GB.
Not sure why this is happening. Anyone got any ideas?
Regards
Paul Towler
View 3 Replies
View Related
Oct 2, 2014
I have a scenario where a customer is going to be using Log Shipping to the DR site; however, we need to maintain the normal backup strategy on the current system. (i.e. Nightly Full, Every 6 Hour Differential and Hourly Transaction Log backup)I know how to setup Transaction Log Shipping and Fail-over to DR and backup but now the local backup strategy is going to be an issue. I use the [URL] .... maintenance solution currently.
Is it even possible to do regular backups locally keeping data integrity for your backup strategy with Transaction Log Shipping enabled?
View 2 Replies
View Related
Jan 29, 2008
hi
If wanted to set up Logshipping between two sqlserver 2005 enterprise edition servers.The transaction log backup is being taken every 2 hours and with approx size of 1GB - 1.5 GB.
Now before the copy job runs,i want to compress the tlog file on primary server,copy it to secondary server and uncompress it on secondary and then apply transaction logs to secondary server.I need the procedure how to do it.Please help out.
Thx in advance
Regards
Arvind
View 3 Replies
View Related
Jan 24, 2015
i have created a new login in primary server and provided dbowner permission to primary db.how do i transfer this login to secondary server and assign the same permission to secondary db ?
View 2 Replies
View Related
May 11, 2015
Setup log shipping from an Australian SQL2008R2 server to a UK SQL2012 server. With the time involved to copy the large backup file across a WAN link, we end up with around 2 days of log backups since the full backup.
- The Full Backup is restored to the UK Server to create a new database in norecovery mode.
- The first log backup file is manually copied to the UK server and restored.
- Start the Log Ship copy SQL Agent job - starts copying files prior the full backup on the Australian server. Copies 1 Log backup file and then fails.
- Manually copy the next Log backup file to the UL server.
- Start the Log Ship Restore SQL Agent job and runs successfully and restores the Log file.
- Start the Log Ship copy SQL Agent job - AGAIN it starts trying to copy files prior to the Full Backup. IS this correct behaviour? I thought it should only copy Log files since the full backup.
View 3 Replies
View Related
Jul 16, 2015
Out of using stored procedure, reports and all this staff, I want to know the possible way to make sure that the data inside my Secondary Server Read only database are same as data in my primary server database.
So what is the simple way to do this check?
View 4 Replies
View Related
Apr 18, 2007
i have sql server 2000 db with two data file... primary data file has extension mdf and secondary file has extension ndf (as per microsoft recommendation)..
when i try to backup the db and restore thru the enterprise manager .. in the restore -> options window ... i see both the files has the same extension mdf.. and when the restore completed, the new database still has extension mdf for both the file..
why this behaviour?
* i even try to create a new test db with two files, still its the same behaviour.
View 10 Replies
View Related
Apr 20, 2015
I have not used log shipping before and find myself in a position where I need to reboot the secondary node and then the primary node and I don't actually need to failover.
Is there anything I need to be aware of. When rebooting the secondary node I assume the transactions will be held in the primary nodes log till the secondary comes back and just carry on once back up?
When rebooting the primary node nothing needs to be done and the log shipping will just start again once it has come back?
View 3 Replies
View Related
Dec 19, 2007
I am running an Execute SQL task that does a Begin Tran, then the next task in the sequence is a data task which imports a XML file into two tables. If i doo a Rollback Tran only one of the two tables is rolled back.
Is it possible to have both tables rolled back from one Begin tran command or do i need to split the datatasl into two and treat each import as a seperate issue ?
The connection is set to retainsameconnection
thanks
View 7 Replies
View Related
Sep 18, 2007
hi,
The log shipping between my 2 serves have failed. Can somebody please tell me the steps to follow in order to restore the log shipping between the two servers. I applied full backup. But restoring of transaction logs is failing, I am not able to figure out the cause for the failure
View 4 Replies
View Related