Hi,
I have inherited some databases whith extremely large Log files.
I tried the truncate transaction log but did not work.
Can some body please tell me how to truncate these log files.
Thanks in advance.
Attaullah
I have some Large flat fiiles that I need to export to my SQL Server database. The file sizes range from 16 MB to 116 MB. I've tried to save the files to an excel sread sheet and then export them in that format, but that didn't work. does anyone have any suggestions?
View 1 Replies View Relatedi have a few tables using Sql Server 2005 Express. currently they are holding roughly 30-40k records in them. i have my log files set at restricted growth to 90 megs. while im not close to reaching that, i would like my tables to be able to scale up to possibly millions of records. based on that, i figure the transaction log file will prolly need to have a higher threshold (unrestricted growth). for those with experience, for tables that have millions of records, what are the average size log files i could expect.
is it a bad idea to just shrink the log file every night during off peak hours so that regardless of the amount of records i have, ill always start the day with a minimal log file?
do large log files have any effect on SQL performance?
We have SQL Server running on a Windows 2003 server, only because Backup Exec requires it. AT the location : C:Program FilesMicrosoft SQL ServerMSSQLData
there is this file: SuperVISorNet_log.LDF which is 15 Gb and is accessed daily. I apologize because I don't know what this is!
My question is: can this file be 'pruned' (for want of a better word) because it's taking up a lot of backup space.
I am trying to run a query that deletes duplicates records on a table with 24m records. The problem is each time I run it the log file fills up and I get an error saying the log file is full. For this reason the query never ends.
Is there anyway to turn of logging when running a query?
I think it also has to do with disk drive runng out of space as the log file is growing to over 12gb.
It is running in simple mode already.
Hello,
I have decided to use Linq for my current ASP.NET project and so far it has been good, but now I am implementing a system that will allow users to upload binary content such as pictures and videos. For ease of management and security, I have decided to store this content directly in the database. The performance hit is a minor concern because very few user-uploaded images/videos will be seen on any given page (usually just one).
From the limited tutorials I have seen on the internet, Linq supports the SQL Server varbinary column through its System.Linq.Binary class. This class does not appear to support STREAMS and instead opts to load all of the contents into memory. This content can then be converted to an array of bytes, which can then be output to the browser via the response stream. This is not good. What if I am sending a video that is very large? Varbinary supports up to 2 GB. I can't have a 2 GB video sitting in memory. It makes a lot more sense to stream it via a small buffer.
Obviously, I am going to limit the size of the content that users can upload, but the core problem remains. If I limit content size to 2 MB and I have 2 GB of memory on the server, then I can only serve 1000 users concurrently. In reality, that number would be much less because of other processes running on the server.
Is there no way to stream data from a varbinary column with Linq using a small buffer of bytes?
Do I need to implement some custom logic on my Linq classes? Since these classes are automatically generated, how would I do such a thing?
Thanks.
how do i insert a large chunk of text into a table column. my project is to build a news website. where people can go and read news articles. the articles are provided by the author in word format, so how do i insert that news article into the table's column? any help would be appreciated
thanks
I have a table that I'm inserting a file into and using the Image data type to store the binary object. Now the code below works fine for files around 1.5 MB, but anything larger and it's like the code won't even execute and I get a Page Not found error.
I'm in the process of running some traces to find out what's going on in the backend, but I'm assuming there's something amiss with my code. The Image data type should handle files that size with no problem but for some reason it isn't.
Does anyone see anything wrong?
Thanks
Dim iLength As Integer = CType(File1.PostedFile.InputStream.Length, Integer)
If iLength = 0 Then Exit Sub 'not a valid file
Dim sContentType As String = File1.PostedFile.ContentType
Dim sFileName As String, i As Integer
Dim bytContent As Byte()
ReDim bytContent(iLength) 'byte array, set to file size
'strip the path off the filename
i = InStrRev(File1.PostedFile.FileName.Trim, "")
If i = 0 Then
sFileName = File1.PostedFile.FileName.Trim
Else
sFileName = Right(File1.PostedFile.FileName.Trim, Len(File1.PostedFile.FileName.Trim) - i)
End If
conn = New SqlConnection(eco)
conn.Open()
cmd = New SqlCommand("INSERT INTO ECO_Attachments (ECOID, FromType, DocName,OldRev,NewRev,NtLogin,DisplayName, FileName, FileSize, FileData, ContentType) VALUES (@ECOID, @FromType,@DocName,@OldRev,@NewRev,@NtLogin,@DisplayName, @FileName, @FileSize, @FileData, @ContentType) ")
cmd.Connection = conn
Try
File1.PostedFile.InputStream.Read(bytContent, 0, iLength)
With cmd
.Parameters.Add("@ECOID", SqlDbType.Int)
.Parameters.Add("@FromType", SqlDbType.NVarChar, 50)
.Parameters.Add("@DocName", SqlDbType.NVarChar, 250)
.Parameters.Add("@OldRev", SqlDbType.NVarChar, 50)
.Parameters.Add("@NewRev", SqlDbType.NVarChar, 50)
.Parameters.Add("@NTLogin", SqlDbType.NVarChar, 100)
.Parameters.Add("@DisplayName", SqlDbType.NVarChar, 200)
.Parameters.Add("@FileName", SqlDbType.NVarChar, 255)
.Parameters.Add("@FileSize", SqlDbType.Real)
.Parameters.Add("@FileData", SqlDbType.Image)
.Parameters.Add("@ContentType", SqlDbType.NVarChar, 50)
.Parameters("@ECOID").Value = ECOID
.Parameters("@FromType").Value = From
.Parameters("@DocName").Value = DocName
.Parameters("@OldRev").Value = OldRev
.Parameters("@NewRev").Value = NewRev
.Parameters("@NTLogin").Value = NTLogon
.Parameters("@DisplayName").Value = DisplayName
.Parameters("@FileName").Value = sFileName
.Parameters("@FileSize").Value = iLength
.Parameters("@FileData").Value = bytContent
.Parameters("@ContentType").Value = sContentType
.ExecuteNonQuery()
'.ExecuteScalar()
End With
Catch ex As Exception
Response.Write(ex)
'Handle your database error here
conn.Close()
End Try
Here's my delema, I have a file that's 308 bytes wide by 5.7 million records. The record length is fixed and the position and width of the known within the record. When I run DTS I recieve this error Msg MS DTS flat file provide and Err Diesdription: error creating file mapping view: not enough storage is available to process this command. Then when I try to continue with the wizard, it will not allow me to separate the data into the format that I need. Is there any other way to import this file using DTS?
View 1 Replies View RelatedHi my data files sit in the default directories and I think they are causing my partition to run out of space. I mainly use one db that I created but don't use the others (ie master, model, tempdb, etc). Yet I see their MDF and LDF files are growing. What can I do to shrink them down or perhaps move them off to a larger partition after shrinking?
View 6 Replies View RelatedHi€¦
During my web search looking for a solution I ran across SQL CE 3.5 articles. My questions about SQL CE 3.5 are:
1) Can SQL CE 3.5 handle a 4 €“ 6 GB file
- Read
- Parse (SQL)
2) Can SQL CE 3.5 act as a standalone client that a user can view a large (4-6 GB) text file?
- Will I need a .NET (small) client to read the large (4-6 GB) text file?
More info:
The text file will reside on the machine where the SQL CE 3.5 is installed. There is no pull to get the data.
Thank you (in advance)€¦
SQL CE 3.5
Hello,
I created a SSIS solution for reading data from dbase and storing them in SQL Server. In a ForEachDirectory-Loop up to one thousand dbase files are read and stored. The system where the packages are running has 16 GB RAM.
For the first few hundred dbase files everything goes fine, but then, the RAM seems not to suffice any more and a temp file is created (I changed the path in BufferTempStoragePath).
How can it be that there is a need to create temp files if there is so much RAM available?
Why is the RAM filled more and more during the SSIS package execution?
Is there anything I can do to release some of it? (it is running in a loop and there is no need to store all the data)
Could it be caused by dbase?? (I use Microsoft Jet 4.0 OLE DB Provider)
Another thing is that the temp file is not stored in the path I set in BufferTempStoragePath.
There are sufficient permissions set, but temp file is still created in user temp folder...
Any kind of help is very much appreciated!
Best Regards,
Stefan
I need to create script that will import large XML files (500 - 7GB) on a daily basis and store the data in a relational db structure.
What is the best and fastest way of importing such files. I have played around with smaller files and found the following.
1. SSIS XML Data Source: It doesn't seem to like the complex elements types and throws out the file.
2. Using Bulk File Import, sorting the file in XML variable and using XQuery to parse the file: This works but it can't take a file more than 2GB in size, so I can't use this method.
3. C# + XML Serialization: This also works, but seems to be terribly slow. I open the DB connection once, so it doesn't open and close for each db call, but still seems like it takes a long time.
how to import large XML quickly in a relational table structure?
What is the easiest way to get a large fixed width text file (200 columns) defintion into SSIS? To have to define each column with the ruler would be very cumbersome.
View 5 Replies View RelatedHi ,
Is there any method by which I can divide the large flat file into certain number of small files keeping the header in each of the sub files?
Regards,
Prash
I have several databases that have grown to 300 GB and would like to distribute the data into multiple files across multiple drives. Can I create a new database that is spread across the new drives and use a full backup to restore or am I stuck with unloading the data table by table?
View 3 Replies View Related
Hello,
I am attempting to restore the database from within VB.NET application I am making the following 3 calls:
RESTORE FileListOnly FROM DISK = 'C:MyDatabase.dat'
USE Master RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat' WITH NORECOVERY, MOVE 'MyDatabase' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataMyDatabase.mdf', MOVE 'MyDatabase_log' TO 'C:Program FilesMicrosoft SQL ServerMSSQLDataLDFMyDatabase.ldf', REPLACE
RESTORE DATABASE MyDatabase FROM DISK = 'C:MyDatabase.dat'
using SMO. This logic works fine with small *.dat files, however when using *.dat file of about 4Gb I get an error on the 3d restore database call:
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
ExecuteNonQuery failed for Database 'master'.
An exception occurred while executing a Transact-SQL statement or batch.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Operator aborted backup or restore. See the error messages returned to the console for more details.
The same program/logic also works fine when I use MS SQL 2005 and it runs fine from MS SQL 2005 Query Analyzer for both 2005 and 2000 databases. There seem to be only problem with MS SQL 2000 from within VB.NET. Anybody has any idea? I'd appreciate any response. Thanks
Eugene
I have a master table containing details of over 800000 surveys made up of approximately 400 distinct document names and versions. Each document can have as few as 10 questions but as many as 150. Each question represents one row.
My challenge is to create a separate spreadsheet for each of the 400 distinct document names and versions containing all the rows and columns present in the master table. The largest number of rows would be around 150 and therefore each spreadsheet will not be very big.
e.g. in my sample data below, i will need to create individual Excel files named as follows . . .
"Document1Version1.xlsx" containing all the column names and 6 rows for the 6 questions relating to Document 1 version 1
"Document1Version2.xlsx" containing all the column names and 8 rows for the 8 questions relating to Document 1 version 2
"Document2Version1.xlsx" containing all the column names and 4 rows for the 4 questions relating to Document 2 version 1
I assume that one of the first things is to create a lookup of the distinct document names and versions assign some variables and then use this lookup to loop through and sequentially filter the master table data ready for creating the individual Excel files.
--CREATE TEMP TABLE FOR EXAMPLE
IF OBJECT_ID('tempdb..#excelTest') IS NOT NULL DROP TABLE #excelTest
CREATE TABLE #excelTest (
[rowID] [nvarchar](10) NULL,
[docName] [nvarchar](50) NULL,
[Code] .....
--Output
rowIDdocNamedocVersionquestionblankField
1document11q1NULL
2document11q2NULL
3document11q3NULL
4document11q4NULL
5document11q5NULL
6document11q6NULL
[Code] .....
Hello everyone,
This is my first time posting here, I hope this questions has not been asked before. I tried to search for it but I came not with nothing.
Recreating the error :
I am using VS2005. I created a Pocket PC 2003 project.
I have downloaded the SQL Server Compact Edition and installed it. I get the System.Data.SqlServerCe.dll file from the installation directory.
I reference to that DLL using Add Reference in VS2005.
Build it. In the Bin folder, a long list of files suddenly appears.
System.data.dll
System.data.oracleClient.dll
system.web.dll
system.enterpriseservices.dll
system.enterpriseservices.wrapper.dll
system.transactions.dll
and the rest of your original files in Bin
The worst of it all, all of these files are deployed into the Emulator! Causing it to run out of memory and unable to deploy.
Something is not right here, I just cannot figure it out! If this happens, each mobile devices can hold one applications. Thats not the way it should be, right?
If you have solved this before, do help. I am at my wits end at the moment.
Thanking you in advance.
Sincerely,
Lasker
Hi,
We are processing 60,00, 000 rows(2 GB file) available in a flat file and loading them in to a database tables using OLEDB Destination components. In the data pipeline of an SSIS package we have 1 flat file source reader, 7 look up components(full cache mode), 1 multicast component and 2 OLE DB destinations with fast load option.
We have observed that first 10,00, 000 rows are processed and loaded in to target tables in just 4 minutes time. The second set of 10,00, 000 rows are processed in 15 minutes time. After this for processing each 1,00,000 rows SSIS is taking approximately 8 - 10 minutes time. We are not able to identify the reasons for the unexpected behaviour of SSIS.
We thought that as the input file size is 2 GB SSIS is not able to manage and slowing down over time of execution. We did split the big input file in to 60 small 37 MB (approx) size files. Then we modified the package by adding For-Each loop task to process all the 60 small files and load them in to database server sequentially. Even in this approach also we have identified data loading has slowed down drastically after processing 13 files.
In order to verify is there any problem with reading source file or transformation, we have replaced OLEDB destinations component with Flat File destinations. With Flat file destination the time taken for processing rows is very constant. For every 8 minutes package is able to process 10,00,000 rows and write them in to the destination files. So, there is no problem with the with either Look up components or flat file source reader.
We are sure that target database server is in same state/condition from the starting to the end of package execution. The client box in which we are running the package is having 1 GB RAM. During package execution time the CPU usage is at 30 % and PF usage is 580 MB. SP1 is also installed on both Client and Server.
Does any one have clue what is causing slow down of data load over the time of package execution?
I'm currently experiencing major problems with SSIS when opening and editing large .DTSX package files that contain Exec DTS 2000 Tasks which have the package data loaded internally. I have no issues if I point the task to a .DTS file, or to an actual DTS package on a SQL 2000 server - but if I load the package internally then once the underlying .DTSX file gets over around 17MB or so in size (which doesnt take long making a few edits to even fairly simple packages now and then), I start to experience major issues with VS/BIDS 2005 crashing randomly when I try to perform any action with the package (open, save etc). Things like OutOfMemory exception errors, followed by the properties of Exec DTS 2000 task being deleted, and also sometimes accompanied by messages about the application not being installed properly.
Again its ONLY when the underlying .DTSX file reaches a certain size limit, and only when I've got an Exec DTS 2000 task with the package loaded internally. I've replicated the issue using several different package files on several different machines (even on servers with lots of memory, fwiw).
Can anyone out there help me with this? SSIS - namely SSIS Exec DTS 2000 package tasks - are our lifeblood at my company and this trend of random and serious crashing on large package files is very disturbing to say the least.
thanks,
Wil
I proposed on a new server that we separate Data Files, Log Files, tempDB, Backups, etc. onto separate LUNS on a SAN with High Speed Solid State Drives.I was told that with the new technology with solid state SAN's that it would decrease performance and that it did not work the same way as it did when you had RAID 5's etc.I thought that if things were cared out correctly by a SAN Administrator they would know how to configure for optimal performance.
View 2 Replies View RelatedIn the For Loop, How to Iterate from Older flat files to Newer flat files based on File's Timestamp. If there are some older files in that folder, it should be processed first and then continue with the newer one.
Any Suggestions?
In the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this:
1. If no file(s) found, stop executing and send email saying no file(s) found;
2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1:
----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.VisualBasic.FileIO.FileSystem
Imports System.IO.FileSystemInfo
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String
Dim cFileType As String
Dim cFileFlgVar As String
WriteVariable("SCFileFlg", False)
WriteVariable("OOFileFlg", False)
WriteVariable("INFileFlg", False)
WriteVariable("IAFileFlg", False)
WriteVariable("RCFileFlg", False)
cDataFileName = ReadVariable("DataFileName").ToString
cFileType = Left(Right(cDataFileName, 4), 2)
cFileFlgVar = cFileType.ToUpper + "FileFlg"
WriteVariable(cFileFlgVar, True)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object)
Try
Dim vars As Variables
Dts.VariableDispenser.LockForWrite(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
vars(varName).Value = varValue
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
End Sub
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
End Class
example for step 2:
-------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
'Set the properties like username & password
cm.Properties("ServerName").SetValue(cm, "ftp.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0") 'The 0 setting will make it not timeout
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
'create the FTP object that sends the files and pass it the connection created above.
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
'Connects to the ftp server
ftp.Connect()
'ftp.SetWorkingDirectory("..")
ftp.SetWorkingDirectory("directoryname")
Dim folderNames() As String
Dim fileNames() As String
ftp.GetListing(folderNames, fileNames)
Dim maxname As String = ""
For Each filename As String In fileNames
' whatever operation you need to do to find the correct file...
Next
Dim files(0) As String
files(0) = maxname
ftp.ReceiveFiles(files, "C: emp", True, True)
' Close the ftp connection
ftp.Close()
'Set the filename you retreive for use in data flow
Dts.Variables.Item("FILENAME").Value = maxname
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I have the need to delete old backup files via TSQL job. Found this solution online:
PushD "
emoteservershareDIFF" &&(
forfiles -m *DIFF*.sqb -d -1 -c "cmd /c del /q @path"
) & PopD
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
Brief overview...Running SQL Server 2003 Server Enterprise 64 bit - All Service Packs and patches current
SQL Server 2005 Enterprise Edition 64 bit Build Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I cannot import any SSIS packages nor crete any new folders under stored packages. I hve googled the news groups and looked at BOL to no avail. HELP!!!!
I am thinking about replacing the INSERT data scriptfiles that I have with XML files. This way I can open the XMLfile using an XML Editor and see the values in a GRID andmake changes easier.Do you see any problem with this approach?I managed to put together some code that is exportinga SQL table with its data to an XML file and also a codethat reads the XML file's data and inserts it into a table.Now I am researching on XSD, td:datatype, DTD...(I am new to XML) in order to figure out how I canuse a single xml file that will hold both the sql serverfields, the datatypes and their values.If you have links to some sample code that has anythingto do with the datatype export and import I am workingon, can you please share them with me?Most importantly what do you think about the idea of usingXML files vs sql scripts?Thank you
View 4 Replies View RelatedI have a scenario where I need to convert RDF files to PDF files? may I know is this achievable in SSIS - writing C# code?
View 6 Replies View RelatedI am wanting to reduce the amount of Virtual Log Files I have. In reading through the Online Book Documentation, I realize that I have forgotten to move the Transaction Log Files to a different drive. Now that the server is in production, I wanted to get some input about the best way of making this change.
Can I just change the directory the log files are being written to in the DB properties without having any adverse problems occurring?
Hi!
I'm using replication with two database on SQL 2000,when begin, the log files size is 50mb and the data files size is 150mb. But now the log files size is 2Gb and the data files size is 4Gb. I would like to decrease the log files and the data files ??? How do i do this???
(I using Truncate and shrink doesn't change )
Thanks!!!
I need to write codes to access many image files and wave files and display them on the webpage. Both of these files are stored on the server (as many experts in this forum adviced) and their locations are in the SQL server database. About the wav files, I think I will have to convert them to MP3 first for fast delivery on internet. Since I am a newbie, any help would be appreciated.
Thanks,
I have a problem with bcp and format files.We changed our databases from varchar to nvarchar to support unicode. Noproblems so fare with that. It is working fine.But now I need a format file for the customer table and and it is notworking. It is working fine with the old DB with varchar, but withnvarchar I'm not able to copy the data. The biggest problem is, that Igot no error message. BCP starts copying to table and finished withouterror message.This is my table:CREATE TABLE [dbo].[Customer] ([ID] [int] NOT NULL ,[CreationTime] [datetime] NULL ,[ModificationTime] [datetime] NULL ,[DiscoveryTime] [datetime] NULL ,[Name_] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AI NULL ,[Class] [int] NULL ,[Subclass] [int] NULL ,[Capabilities] [int] NULL ,[SnapshotID] [int] NOT NULL ,[CompanyName] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AI NOTNULL ,[TargetRCCountry] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AINOT NULL ,[LocationID] [int] NULL ,[MirrorID] [binary] (16) NULL ,[DeleteFlag] [bit] NULL ,[AdminStatus] [bit] NULL) ON [PRIMARY]GOand this is the format file:8.0131 SQLINT 1 12 "#~@~#" 1 ID ""2 SQLDATETIME 1 24 "#~@~#" 2 CreationTime ""3 SQLDATETIME 1 24 "#~@~#" 3 ModificationTime ""4 SQLDATETIME 1 24 "#~@~#" 4 DiscoveryTime ""5 SQLNCHAR 2 510 "#~@~#" 5 Name_SQL_Latin1_General_CP1_CI_AS6 SQLINT 1 12 "#~@~#" 6 Class ""7 SQLINT 1 12 "#~@~#" 7 Subclass ""8 SQLINT 1 12 "#~@~#" 8 Capabilities ""9 SQLINT 1 12 "#~@~#" 9 SnapshotID ""10 SQLNCHAR 2 510 "#~@~#" 10 CompanyNameSQL_Latin1_General_CP1_CI_AS11 SQLNCHAR 2 510 "#~@~#" 11 TargetRCCountrySQL_Latin1_General_CP1_CI_AS12 SQLINT 1 12 "#~@~#" 12 LocationID ""13 SQLBINARY 1 33 "#~@~#
"13 MirrorID """#~@~#" is the field terminator. We have a lot of text files with allkind of charachers in it. So we think this is a set that will neveroccur in our files.Thanks for your help!*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
Hi All,
Are there any MDS Descriptor Files associated with Databases Files? Are these associated with transaction logs? As per my information there are .mdf , .ndf and .ldf files.Could anyone please guide me ASAP,as there is an urgent requirement from one of the clients?
Thanks in Advance
Gaurav Matkar