Hi,
I need some advise in the log shipping. The log files in the primary server get cleaned up according to what I have specified in the maintenance plan. But the log files that got shipped to the secondary server stay there for ever wasting my hard disc. Will it make any problem if I remove them or can I set it up to remove all files earlier than past 2 hrs? Please advise.
Thanks
I had received a message that my log file is full and it do not enable to me to do a database backup before free up disk space. How do i clean up de log file (_log.ldf)?
View 5 Replies View RelatedI have a custom Data Flow task that creates temp files to the system temp directory during processing. A lot of times, we'll use SSIS to do one data transformation, running and tweaking the package along the way... we do this in the designer ... if we notice something that's incorrect in the data view, we just hit the stop button and fix it. However, when we do this, the Cleanup() function isn't called, and my temp files are left in the temp directory, when they really ought to be disposed of.
Is there a method that gets called every time when the DtsDebugHost quits, whether it finished, didn't finish properly, or was stopped in the middle? What would be a good way (other than having some service that monitors what temp files are used by what processes) to clean up temp files after we don't need them?
~Steve
Quick history, I have substantial experience using MS Access, VBA, and Regular Expressions to clean up messy text files for use in MS Access.
I want to upgrade an MS Access back end to SQL Server (2008 to be specific). I need to upload several delimited files on a daily basis. The files are full of formatting that I strip out using VBA and Regular Expressions. I've poked around on the site and found some UDFs that implement the VbScript Regular Expressions object as a stored procedure in Transact SQL.
My questions is, am I better off processing the files externally using a procedural language like VB or can SQL Server handle the processing as gracefully as MS Access/VBA/RegEx does?
Thanks for letting me tap into your experience.
I could simply puzzle it out myself by implementing it in SQL Server but I'd rather not waste the time as a newb to transact SQL and then find out that I'd be better off doing it externally.
J--
I have log shipping setup at a client site (it is their network). Log shipping runs fine until midnight, and then stops processing files. What I notice on the primary server (where the files are backed up to), all the files after midnight are set to A attribute, none of the files before midnight have this. The short of it it does not process these files and log shipping dies and has to be rebuilt. Any network admins have any ideas (I did have them stop backing up these files with their backup software) still dies
View 3 Replies View RelatedHi,
Is it a recognised limitation of log shipping over a WAN, that if you re-index the primary db then the result is gigabytes of trn log to send over the WAN, effectively breaking the log shipping sync?
Are there any known work-arounds?
Would anyone recommend using db replication instead to maintain a DR sql server?
Any comments greatly appreciated.
Steve
I have two databases on a Production Server that I want to Log Ship to a Test Server. According to the sys.master files the physical File Location is on an E drive. Early attempts at Log Shipping these two files error'd out due to space issues on the E drive (one Log Shipped and then one err'd out). I was subsequently informed from the server group that they would prefer that I Log Ship these two database files over to the M Drive where more space is available. In fact, they modified the Server Properties / Database Settings / Database Default Locations (for Data and Log) to the larger M drive (I'm not really sure why they just don't increase the E drive space but there is proabably a good reason).
Okay, so now my problems have been solved. Easy enough. Now I deleted the successful Log Shipped database and started from scratch. However, as before, one db restored and one failed (due to space issues). Apparently, both db are pointing towards the E drive. How is that possible?Â
So here I am with one successful database and the normal sys databases pointing to the E drive. What is the best way of approaching this  move to the larger and preferred M drive?
I'm experiencing a weird problem with log shipping in SQL 2005.
I've setup Log Shipping for a production database between two sites. The standby database is being updated correctly and everything seems to be working as expected but for one detail: the name of the transaction log backups are generated with an UTC timestamp instead of my local timezone.
The the data below extracted from the backup history:
2007-06-23 17:30:00.000 D:BackupDatabasesmydbmydb_20070623073000.trn
2007-06-23 17:15:00.000 D:BackupDatabasesmydbmydb_20070623071500.trn
2007-06-23 17:00:00.000 D:BackupDatabasesmydbmydb_20070623070000.trn
2007-06-23 16:45:00.000 D:BackupDatabasesmydbmydb_20070623064500.trn
My timezone here is GMT+10.
Although it's not affecting Log Shipping, it's very confusing as the full backups have a timestamp in the local timezone!
Has anyone seen experienced something similar to this? Please see below my SQL details:
1 ProductName NULL Microsoft SQL Server
2 ProductVersion 589824 9.00.3042.00
3 Language 1033 English (United States)
4 Platform NULL NT AMD64
5 Comments NULL NT AMD64
6 CompanyName NULL Microsoft Corporation
7 FileDescription NULL SQL Server Windows NT - 64 Bit
8 FileVersion NULL 2005.090.3042.00
9 InternalName NULL SQLSERVR
10 LegalCopyright NULL © Microsoft Corp. All rights reserved.
11 LegalTrademarks NULL Microsoft® is a registered trademark of Microsoft Corporation. Windows(TM) is a trademark of Microsoft Corporation
12 OriginalFilename NULL SQLSERVR.EXE
13 PrivateBuild NULL NULL
14 SpecialBuild 199360512 NULL
15 WindowsVersion 248381957 5.2 (3790)
16 ProcessorCount 4 4
17 ProcessorActiveMask 4 f
18 ProcessorType 8664 NULL
19 PhysicalMemory 4095 4095 (4294037504)
20 Product ID NULL NULL
Thanks,
André
At one of our client side a wired log shipping issues has come up.while monitoring those two server i noticed that although log-shipping report says both server are in sync, report displays information related to both backup and restore , it doesn't shows information related to copy that is when was last file copied and last file copy column is showed blank. Same is when i execute proc "sp_help_log_shipping_monitor" . I get same result ...
When i expand copy job history to analyse its what i found is although job has executed successfully , but in depth reading each steps says that no .trn file was copied .
My copy directory is at secondary server itself where .trn files are placed.And from this location itself files are begin restored.
SQL server and agent on both servers are run by same domain account ....
Hi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Is there any possibility of loosing data ?
Thanks
My DB is holding some data for the moment I'd like to clean.
I'm wishing to erase the WHOLE data stored in the database (just the data, not the DB itself). What SQL command should I use ?
If there is another way to do what I'm wishing to do, let me know please.
Thanks.
Hi,
I 'm sure I am missing something obvious, hopefully someone could point it out. After a failover log shipping, I want to fail back to my inital Primary server database; however, my database is marked as loading. How can I mark it as normal?
I did the failover as follow:
I did a failover log shipping from the 2 server Sv1 (Primary) and Sv2 (Secondary) by doing the following
1) Stop the primary database by using sp_change_primary_role (Sv1)
2) Change the 2nd server to primary server by running sp_change_secondary_role (Sv2)
3) Change the monitor role by running sp-change_monitor_role (Sv2)
4) Resolve the log ins - (Sv2)
5) Now I want to fail back - I copy the TRN files to Sv1 - use SQL Ent to restore the database at point in time. The task is done; however, the database is still mark as loading. I could not use sp_dboption.
I appreciate any suggestion.
Thanks in advance
PHP Code:
WHERE
(dbo.document.docVisible = 'yes') AND (dbo.document.docHide = 'NO') AND (dbo.t_files.fileMoved = '1') AND (dbo.documentCategory.docCategoryName LIKE '%olic%') AND (dbo.minisite.sectionLive = 1) AND (dbo.t_files.fileName <> N'A LINK') AND (dbo.t_files.fileName NOT IN (SELECT exFileID FROM t_exclude))
OR (dbo.document.docVisible = 'yes') AND (dbo.document.docHide = 'NO') AND (dbo.t_files.fileMoved = '1') AND (dbo.minisite.sectionLive = 1) AND (dbo.t_files.fileName <> N'A LINK') AND (dbo.t_files.fileName NOT IN (SELECT exFileID FROM t_exclude)) AND (dbo.document.docDesc LIKE '%olic%')
OR(dbo.document.docVisible = 'yes') AND (dbo.document.docHide = 'NO') AND (dbo.t_files.fileMoved = '1') AND (dbo.minisite.sectionLive = 1) AND (dbo.t_files.fileName <> N'A LINK') AND (dbo.t_files.fileName NOT IN (SELECT exFileID FROM t_exclude)) AND (dbo.document.docType BETWEEN 1 AND 4)
OR (dbo.document.docVisible = 'yes') AND (dbo.document.docHide = 'NO') AND (dbo.t_files.fileMoved = '1') AND (dbo.minisite.sectionLive = 1) AND (dbo.t_files.fileName <> N'A LINK') AND (dbo.t_files.fileName NOT IN (SELECT exFileID FROM t_exclude))
OR(dbo.t_files.fileName IN ('127-2006-1-27-3321130.pdf', '127-2006-1-30-3726619.pdf', '127-2006-1-27-5700042.pdf', '127-2006-1-27-5678586.pdf', '127-2006-1-27-5693574.pdf', '127-2006-1-27-5873392.pdf'))
ORDER BY dbo.document.docDesc
Right - as you can see, some of the line slook pretty similar. When I try and do:
(one AND two AND three) AND (four OR five), I get
(one AND two AND three AND four)
OR
(one AND two AND three AND five)
when using enterprise manager. Is there anyway to keep the first way of doing it. Otherwise, everytime I add anotehr OR statement in, I'll have to create a new line!
I have the following query which strips out middle initial data from the first_name column and populate the middle_initial column with the relevant data.
What my query does not handle is when a first name has a single character (IE: A). In its current state, the "A" would be moved to the middle_initial field with a period added to the end (IE A.). The first_name column would also include "A". Basically, when a single character first name is found in the first_name column, I do not want to populate the middle_name field.
Hope this does not sound too cryptic; query is below along with some sample data when run.
SELECT first_name,
CASE
WHEN SUBSTRING(LTRIM(RTRIM(first_name)),LEN(LTRIM(RTRIM(first_name)))-1,1)=' '
THEN SUBSTRING(LTRIM(RTRIM(first_name)),LEN(LTRIM(RTRIM(first_name))),1) +'.'
ELSE NULL
END AS 'middle_initial',
CASE
WHEN SUBSTRING(LTRIM(RTRIM(first_name)),LEN(LTRIM(RTRIM(first_name)))-1,1)=' '
THEN LEFT(LTRIM(RTRIM(first_name)),CASE WHEN LEN(LTRIM(RTRIM(first_name)))>=2 THEN LEN(LTRIM(RTRIM(first_name)))-2 ELSE
LEN(LTRIM(RTRIM(first_name))) END)
ELSE LTRIM(RTRIM(first_name))
END AS 'first_name_removing_initials'
FROM contact
Sample Data
first_name, middle_initial, first_name_removing_initials,
Paul, NULL, Paul
A, A., A,
A Fred, NULL, A Fred,
Aaron, NULL, Aaron
Dear All,
i'm trying increase the performance of one select statement.
after trying first time, at the second time it is giving results fastly.because the data is there already in the buffers.
how can i clean the buffers everytime after run the query?
i'm using
--dbcc dropcleanbuffers
--dbcc freeproccache
are these enough or need some more....
please guide me
Vinod
Even you learn 1%, Learn it with 100% confidence.
I have a db server that had served both my application data and reporting services. I have since installed a second db server to be the reporting services server; the primary box still stores the application data. I am keeping reporting services installed and set up on the primary box, since I would like it to act as a warm standby for the reporting services function.
However, the ReportServerTempDB on my primary box is still quite large. The ChunkData table is quite close to 10 gig. The CleanupCycleMinutes property is set to the default of 10. Clearly any data that might be in this table is far older than that.
Is there some recommended method of clearing this data? Can I just delete the rows or do a truncate on the table? I would prefer not to uninstall/reinstall reporting services, as this machine is actively serving my application data.
Thanks.
Hi everyone,
What is the easy way to clean up all ms sql 2005 tables?
For example, a database table named Customers which has triggers and primary key and foreign keys. Now I clean up the Customer table using the folowing statement
delete Customers
And the ms sql 2005 asks me to remove all triggers and foreign keys before allow me to clean up the Customers table. Is there a way to clean up all tables without remove the tiggers and foreign keys?
Thanks
May
Hi,
My problem is that I cannot completely clean buffer cache on SQL Server 2005 version 9.00.2047.00 (probably SP1).
Right after I run DBCC DROPCLEANBUFFERS in the context of my database (this is development server, and so far I am only the one who is working with a particular database), I run a script that quetries sys.dm_os_buffer_descriptors view also from the context of my database to make sure that the buffer cache is really clean. However it shows large number of entries totalling 42 MB.
I ran both DBCC an the script in the past too, and it always showed nothing in the results, that means that buffers were really clean. The reason why I am running this is for benchmarking of existing and new application.
Does anybody have any idea, suggestions, how to troubleshoot this issue ? I already closed all connections to this database, but rebooting the server is not an option since other people are also working on it.
Thanks
How to clean all messages of a queue ?
View 5 Replies View RelatedIs there some recommended way to clean input before submitting it to the database? We'd like to develop a library that can be used on our ASP/ASP.NET apps to filter input before it's sent to the SQL Server and Oracle databases. Is there a way to create a .NET DLL that can be used for both ASP.NET and classic ASP apps. Thanks.
View 3 Replies View RelatedI am importing Visual FoxPro (6) views into SQL 2000 tables and I am looking for a snippet of code to "clean up" date fields upon insertion. I can insert the views into the SQL tables fine using the tables/views selection of DTS as my source. However, I would like to ensure the date fields are in fact vaild dates and not garbage using the SQL query option of DTS source. I would like to do the insert and cleanup in one step. Do you have a snippet of code to validate a date field that I can use? Thank you for any assistance in advance, Terry.
View 3 Replies View RelatedHi,
View 6 Replies View RelatedI posted this in the SQL Server Express forum as well...
My app deployed via ClickOnce. It ships with a database creation script which creates the database in the ClickOnce data directory. Upon uninstall, the entire data folder is deleted successfully. But if you then reinstall the app, SQL Server Express still thinks the database exists. Right now, to get a re-install to work, I have to go into Management Studio Express, click on the db (get an pop-up error as the physical db file is no longer there) and then click delete.
So my question is... what system proc should I execute in the db creation script before I run the CREATE DATABASE command?
Good afternoon.
I have an IS package that contains some legacy DTS tasks. The package does run successfully on some machines, but others not at all, generating a weird error that says "Error: The task failed to load. The contact information for the task is "Execute DTS 2000 Package Task;Microsoft Corporate...." There's more to the error but searching on it hasn't turned up any results so I'm not posting the entire thing. I can if requested.
On the server where the DTS packages fail, regular IS packages that contain no DTS legacy tasks run successfully, and the only difference between the machines that work and don't work is SQL Server 2000 is not and was never installed, whereas the machines that work are running 2000 and 2005. The servers where the tasks fail version 9.0.3050.
One thing I have noticed is that on the machines where DTS works there is an extra file in C:Program FilesMicrosoft SQL Server90DTSBinn called Microsoft.SqlServer.Exec80PackageUtil.dll. Copying the file to a non-working server did not solve the issue. I tried installing the backwards compatibility update but it said that a newer version was already installed.
If anyone could help I would greatly appreciate it. If you need more information just ask and I would be happy to provide it.
Thanks again,
Kelly
A customer is about to replace their PDC with SQL Server running on it.
MY companies role is to build the new server, and get their SQL Server running again.
I need to have the devices, databases, tables, data and the USERS copied across. I cannot use transfer manager as their will be only 1 instance of SQL Server running on the network.
If all we have is an NT backup is perfomed on the entire disk, i.e. the MSSQL/DATA directory.
How do we recreate the databases and their associated tables and also, how do we recreate the User accounts ?
Any ideas would be appreciated.
Please feel free to e-mail me with a response
NEILA@ANGLIABC.CO.UK
TIA
Hi,
I cannot log in to SQL Server 2005 Dev Edition in my local machine using Windows Authentication. The server returned "Login failed..." when connecting with SQL Server Management Studio.
I have not change anything since installation of this server.
This problem happens in RTM and SP1 versions, both running on Windows Vista RTM.
Anyone having this kind of problem too? Any solution? I'm guessing it's Vista-related.
We are using SQL Server 2005 SP2 to do transactional replication.
We and have a separate service account for the SQL Agents (sqladmin) vs. SQL Replication Agents (sqlrepadmin). It is my understanding this is a replication security best practice. The sqlrepadmin has full permissions on the snapshot share folder and it's subdirectories. The sqladmin account does not have permissions at all.
I have been getting an error message when we run the distribution clean up job.
Executed as user: PRODsqladmin. Could not remove directory '\Tes01boxRepldatauncqabox01_DB01_TO_ORACLE20070905104896'. Check the security context of xp_cmdshell
I have dropped the publication and recreated which is what appears to have caused the error.
From
http://technet.microsoft.com/en-us/library/ms151151.aspx
Note:
If a publication is dropped, replication attempts to remove the snapshot folder under the security context of the SQL Server service account. If this account does not have sufficient privileges, log in with an account that does have sufficient privileges and remove the folder manually. Removing a folder requires the Modify privilege if the folder is a local path or the Full Control privilege if the folder is a network path.
The note above implies that the SQL Server service account (sqladmin) needs permissions on the snapshot folder as well.
Finally my questions:
Is there a workaround that will allow the distribution cleanup job to run as sqlrepadmin and perform the delete?
If both sqlrepadmin and sqladmin need permissions to the snapshot what is the reasoning from a security perspective of separating them out?
In a integration project I am moving data from A to B.
First time is fine - since table B is empty.
However next time I run the process, I would like to delete all records in B before I run the project again.
What is the best way to delete / clean up data when you re run the process ?
Cheers, T
I have problem when I create the clusters I created domain account and give him permission create computer objects and real all properties but there are problem when clean up the cluster always pop up and error but latter I tried using my domain admin and worked perfectly is there any permission is missing for cluster ? or all I need is Create Computer Object and Read Permission?
View 3 Replies View RelatedI have a database that I have been creating and testing. I have added some junk data and some data into lookup tables. Is there a way to create a clean copy of the db and keep the lookup table data? Also will I be able to create the db under a new name?
View 1 Replies View RelatedI have a number of test databases which were created from the same backup. Set up SQLMaint to run on them each night. SQL Maint seems to run clean on all of them, but on two the Scheduled Task shows "Failed". All tasks have been set up exactly the same.
Has anyone run into something like this?
Here's the output from the maintenance job for one of the failing db's:
Microsoft (R) SQLMaint Utility, Version 6.50.240
Copyright (C) Microsoft Corporation, 1995 - 1996
Logged on to SQL Server 'COSTGUARD2' as 'sa' (trusted)
Starting maintenance of database 'Test15' on Thu Jun 17 23:10:01 1999
[1] Check Data and Index Linkage...
** Execution Time: 0 hrs, 0 mins, 1 secs **
[2] Check Data and Index Allocation...
** Execution Time: 0 hrs, 0 mins, 2 secs **
[3] Check System Data...
** Execution Time: 0 hrs, 0 mins, 1 secs **
[4] Update Statistics...
** Execution Time: 0 hrs, 0 mins, 27 secs **
End of maintenance for database 'Test15' on Thu Jun 17 23:10:30 1999
SQLMAINT.EXE Process Exit Code: 0 (Success)
I have made a clean install of SQL 2014 including MDS on a server with Win Server 2012 R2.
After the installation I cant create new models because on an error saying that "Must declare the scalar variable "@Version_Id". "
I can see that the tables gets created in the MDS database but the models dont show up in the web interface.
I get the same error message when I try to deploy an old model.
What is the difference between CleanExpiredCache and FlushReportFromCache Do we need to run both the SPs to clear all the SSRS reporting cache? Is it possible to clean all the Cache information and retain the logs? If yes how we can do so. Is it by deleting the REportServerTempDB.dbo.ExecutionCache table work in achieving this?
View 8 Replies View Related