I want to log/watch the query executed by the "Execute query Task". It's a query with different variables, the different variables i can see in one of the debug windows and these looks OK, but the query doesn't do what's expected. So i want to see the whole query, is that possible?
Query logging on the database server isn't an option. The server is an oracle server and the dba doesn't want to change this setting.
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I am having some difficulties with a Execute SQL Task, I'll try to describe:
The task contains 2 queries:
UPDATE config SET last_timestamp_int=this_timestamp_int, this_timestamp_int=CAST(GETDATE() AS INT) WHERE company_id=?
SELECT last_timestamp_int AS last_timestamp_int, this_timestamp_int AS this_timestamp_int FROM config WHERE company_id=?
The ? reference to a variable set in Parameter Mapping, which has a initial string value set. Direction set to "Input", Datatype set to "varchar", and parametername to "0". The connectiontype is OLE DB. I have tried to set BypassPrepare to true, but that doesnt help.
The second query fetch 2 values which is stored in the task's Result Set, in two variables. Resultset is set to single row.
When I press Parse Query, I get an error:
"The query failed to parse. Parameter Information cannot be derived from SQL statements. Set parameter information before preparing command."
When I try to run the package, I get this error:
---
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at Store last timestamp in variable, Execute SQL Task: Executing the query "UPDATE config SET last_timestamp_int=this_timestamp_int, this_timestamp_int=CAST(GETDATE() AS INT) WHERE company_id=?
SELECT last_timestamp_int AS last_timestamp_int, this_timestamp_int AS this_timestamp_int FROM config WHERE company_id=?" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Store last timestamp in variable
Warning: 0x80019002 at Define global variables: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
---
Can someone please help me identify, what it is I am doing wrong?
In the data flow task, i have thosands of rows flowing, now just before inserting these rows into a table, i want to delete some rows in the destination table. For this, if i use the oledb command, then it will run several times. I think a script can do it but I want to avoid it because it would be an inefficient affair.
I wonder if you can help with the following requirement.
I want to be able to conditionally execute an 'execute process task' depending on the result of a query. I have a table which I will select one record/row from upon each execution, this record has a char 1 'type' field which is the indicator for what process to then execute.
This should be quite a simple package and will be run every 60 seconds so needs to be as efficient as possible.
I am thinking I should go along the lines of using an Execute SQL task to select my row in to a result set, and using a series of precedence expressions to determine what process to execute. But im not really sure how.....
I am a newbie to SSIS and 2005 in general so would appreciate any help you can provide
I've encountered a new problem with an SSIS Pkg where I have a seq. of Execute SQL tasks. My question are:
1) In the First Execute SQL Task, I want to store a single row result of @@identity type into a User Variable User::LoadID of What type. ( I tried using DBNull Type or Object type which works, not with any other type, it but I can't proceed to step 2 )
2) Now I want to use this User::LoadID as input parameter of What type for the next task (I tried using Numeric, Long, DB_Numeric, Decimal, Double none of there work).
Hi, I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties Result Set : None
ConnectionType : OLEDB Connection : Connected to a Local Database (DB1) SQLSourceType : Direct Input SQL Statement : exec(?) IsQueryStorePro : False BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Hi there. I have occasional sincronization error.-XSUBSYSTEM Merge -XSERVER MYSERVER -XCMDLINE 0 -XCancelEventHandle 000006E0 2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01' 2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01' 2006-12-22 14:55:02.974 Initializing 2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01' 2006-12-22 14:55:06.005 Retrieving publication information 2006-12-22 14:55:06.130 Retrieving subscription information. 2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. 2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric. 2006-12-22 15:00:07.800 Category:SQLSERVER Source: Subscriber01 Number: 8114 Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
NOTE: I am using Brian Larsons book Delivering Business Intelligence with SQL Server 2005. I am stuck on page 588 - step 20. I am using Windows Vista Ultimate
Once all the Dimensions & attributes I have selected are dragged into the query area in MDX query builder no data is displayed. There is a message: "No rows found. Click to execute the query." - clicking does nothing.
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
I'm looking for a way to refer to a package variable within any Transact-SQL code included in either an Execute SQL or Execute T-SQL task. If this can be done, I need to know the technique to use - whether it's something similar to a parameter placeholder question mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements within the Execute SQL task, so I don't think the Execute T-SQL task is even necessary for this purpose.
I need some help.... I cannot execute any query from sql 2005, when I try to execute a query it stays executing and I never receive any result set. I uninstalled and re installed again SQL 2005 in my computer and also I installed the Service Pack and I am still getting the same. Could you please help me or advice on this situation?
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination) Could you tell me why then other is slower?
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
I believe all of us use SQL Server Management Studio to execute query. As I encountered serious problem with this method, due to typo error by accident, I am wondering if we can run the .sql file from dos and supply parameters with it.Possible?
declare @sql char(500) Select @sql = '"Insert Into T74ACCO Select * From tempdb..##Temp tp Where tp.' + @Key + ' not In (Select ' + @Key + ' From T74ACCO)"'
I create some tables and I can't execute new query, I used to be able to do it, but I can't do it now. I'd like to find out that how can I do it again.
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
If I have serveral queries as shown below: ================================================== ========== USE XXX SELECT XX_ZZZZZ, XX_YYY, XX_XXX FROM ZZZ_ZZZZ_ZZZZ WHERE QQQQQQQQQQQQQ ='PGL'
USE XXX SELECT AAA_AAAAA_AAAA,AA_BBB, CC_DDD FROM SSSS_SSSSS_SSSSS WHERE FFF_FFFF ='A' ================================================== =========== Can anyone tell me if the queries execute concurrently or is it one after the other?
I try SP2 and cannot get the Execute SQL task to work as before.
In this example I use an OLEDB Microsoft Oracle provider.
The script uses a parameter like that
select Cast( decode(( select DECODE(TRUNC(c.END_DATE), TRUNC(SYSDATE),1,NULL) AS RESULT from one_stage.load_complete c where TRUNC(c.end_date) = TRUNC(sysdate) and c.name = ? and c.STATUS = 'SUCCEEDED') ,Null,0,1) as varchar(2)) AS Result from Dual
The script task is set to BypassPrepare = False
I note only one change, the addition of a parameter setting called Parameter Size set by default to -1
I tried different things like reading the new BOL, changing the Bypass prepare, Changing the Parameter Size and changing the ? , nothing works. the output variable is always set to a value of 0 which is the result of the query test if there is no match.
It looks like the input variable is no longer passed to the query parameter.
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly 2)The selected package cannot be opened 3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
I am trying to execute a stored procedure in Query anaylzer for SQL server 2005. I am not sure I am doing it correctly though, because I am getting an error message. Here is the command I am typing: execute DetaHistoryGet(84,885,34,"EndDate") Here is the error message I get: Msg 102,Level 15, State 1, Line 1 Incorrect syntax near '84'
Here are a few lines from the stored procedure. I have not included it all here. CREATE PROCEDURE [dbo].[DetaHistoryGet] ( @MarketId decimal, @OwnerId decimal, @QuarterId decimal, @SortExp nvarchar(50) ) AS SET NOCOUNT ON
Hi All, I have a table which consists the leave details of an employee. I have the columns like paid leaves,sick leaves,personal leaves in the above table Problem : For eg: An employee joined on 21 May 2008. After 6 months i.e., 21 Nov 2008 I need to update the above columns (i e., increase the no.of leaves) So updation is to be done for every 6 months and for every 1 year. Can anyone say me how to execute the update query based on the duration. Thanks in advance.