Logging In Stored Procedures
Nov 10, 2006
Hi All
Not sure if this has been asked but quite honestly, I have tried several searches and too many hits are returned.
I use 3 separate stored procs for a process in a .net program where sp1 inserts the header. Then, looping through the details, I use sp2 to insert the detail records and then for each detail, I loop through other sub-records and insert with sp3.
I would like to place the whole update within a transaction so that an error on sp3 will rollback the entire thing.
My Problem: Each of sp1, 2 and 3 call another stored proc, say spLog which logs the process and the error messages. When I roll back, how can I prevent my logs from rolling back?
Any help will be appreciated
View 5 Replies
ADVERTISEMENT
Jun 14, 2007
Hi
We have a database that has over a 1000 stored procedures. Most of them are used but not all of them. Because it would take to much time to investigate which are used or not, I want to log each execution of a stored procedure for a month. This way I can see which procedures are used and which are not.
Is there a way to do this???
I thought of using a DML trigger that fires after an 'exec' statement but it seems that it can be only triggered after a create, alter or drop statement.
Thanks!
View 3 Replies
View Related
Jun 14, 2005
Hello,I was wondering if there were any built-in objects to handle error handling, in any of the SQL Server objects, or just to use event log or trace or debug or something like that. Or is it not recommended at all to use try.. catch, for whatever reason.Thanks a lot.
View 4 Replies
View Related
Mar 14, 2000
Can anyone tell me how to turn logging on to get statistics on execution times for stored procedures
Thanks
View 2 Replies
View Related
Oct 13, 2005
Dear group,is it possible in SQL-Server to see when a stored procedure wasexecuted ?I would say it is only possible with some traces but not with thestandard settings.For a short answer on that matter i'd be thankful.RegardsUli
View 4 Replies
View Related
Jul 23, 2005
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies
View Related
Sep 30, 2006
Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
View 1 Replies
View Related
Nov 6, 2007
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
View 16 Replies
View Related
May 25, 2006
We use SQL Server 2005 and we use lots of stored procedures. Each time a stored procedure run we log the name, execution time and username so we can identify trends and long-running procedures.
I would like to add the actual CPU and IO cost of execution to this log. Is there a way to get it? This type of information is viewable in SQL Server's performance tools - so there must be some way to get it.
Can someone point me in the right direction please?
Thanks!
View 3 Replies
View Related
Jul 25, 2007
Hello all,
I have a big stored procedure which is going to alter many tables,insert data, basically lot of changes.
So, i want to have a text file (or) any log file which will display, what all the changes does the stored procedure has done ( They dont want profiler output )
Can anybody know how to log the results of execution of stored procedure to a text file.
Thanks.
View 2 Replies
View Related
Oct 25, 1999
I'm looking for a facility similar to NT audit facility except for SQL Server 6.5.
Is there a tool or facility that will track when users log in (using SQL Server security), and either which stored procedures they execute or which tables they select?
View 1 Replies
View Related
Dec 7, 2005
Hi,
I am new to SQL Server and hence asking this.....
I have a requirement to catch any problem within my code and log it into a table with structure:
CREATE TABLE ERROR_LOG
(MSG varchar(1000),
ERROR_CODE varchar(1000)
)
As an example:
declare @test int
begin
--deliberately assigning a char into an int variable
set @test='ABC'
end
This, as expected throws an error like:
Msg 245, Level 16, State 1, Line 2
Conversion failed when converting the varchar value 'ABC' to data type int.
I want to catch the first line to ERROR_CODE field and the second line to MSG field in ERROR_LOG table
I also need to do it such that this proc seems SUCCEDED with logging into error log
How can I do this in SQL Server?
Please suggest.......
[From Oracle background, actually I am speaking about EXCEPTION Block in Pl/SQL]
Best Regards,
Ayan
View 4 Replies
View Related
Jun 18, 2007
Greetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
View 3 Replies
View Related
Aug 16, 2001
What happens if any of the extended stored procs below can't connect to the Exchange server? Is the failure logged? Does it back off and try again later?
xp_startmail
xp_sendmail
xp_findnextmsg
xp_readmail
xp_deletemail
sp_processmail
xp_stopmail
View 1 Replies
View Related
Jul 10, 2007
Hello, I am getting many of these messages in my server's event log (approximately 13 every 5 seconds or so). I have tried clearing the queue with "END CONVERSATION @ConvHandle WITH CLEANUP;" but the event log keeps getting messages. I have attached an example below.
Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 9724
Date: 7/10/2007
Time: 3:52:37 PM
Description:
The activated proc [dbo].[SqlQueryNotificationStoredProcedure-32e779eb-edcb-44d1-ba30-93f46ef9d9f8] running on queue HoudiniPlatform.dbo.SqlQueryNotificationService-32e779eb-edcb-44d1-ba30-93f46ef9d9f8 output the following: 'Could not find stored procedure 'dbo.SqlQueryNotificationStoredProcedure-32e779eb-edcb-44d1-ba30-93f46ef9d9f8'.'
View 3 Replies
View Related
Oct 17, 2007
Hi,
I decided to use the SQL Server log provider to store logging data of all my Integration Services packages. I also created some reports about this data for operating purposes.
I have a problem occurs the name of the executing package is not always written to the log,but the name of the single task which failed. But that is not very useful information for operating, because I do not see any chance to get the name of the package by the information which is logged in the sysdtslog90 table in the database which I defined for SSIS Logging.
How do I configure the package to always log the package information into the table, too?
Best regards,
Stefoon
View 5 Replies
View Related
Apr 29, 2008
How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
View 1 Replies
View Related
Jun 13, 2007
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies
View Related
May 13, 2008
Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
View 5 Replies
View Related
Apr 7, 2006
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
View 24 Replies
View Related
Apr 23, 2008
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
View 1 Replies
View Related
Mar 26, 2008
Hello
I'm start to work with SSIS.
We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:
SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'
EXEC @RETVAL = sp_executeSQL @SQLSTRING
How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)
I found a way but I think i'ts only a workaround:
1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)
Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?
Thanks for an early Answer
Chaepp
View 9 Replies
View Related
Sep 12, 2005
I recently read the project real ETL design best practices whitepaper. I too, want to do custom logging as I do today, and also use SSIS logging. The paper recommended using the variable system::PackageExecutionId to tie the 2 logging methods together.
View 4 Replies
View Related
Jun 16, 2007
Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
View 5 Replies
View Related
May 8, 2008
I am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.
The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?
Thanks in advance
John
View 5 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
May 15, 2008
i have created the folowing function but keep geting an error.
Only functions and extended stored procedures can be executed from within a function.
Why am i getting this error!
Create Function myDateAdd
(@buildd nvarchar(4), @avdate as nvarchar(25))
Returns nvarchar(25)
as
Begin
declare @ret nvarchar(25)
declare @sqlval as nvarchar(3000)
set @sqlval = 'select ''@ret'' = max(realday) from (
select top '+ @buildd +' realday from v_caltable where realday >= '''+ @avdate +''' and prod = 1 )a'
execute sp_executesql @sqlval
return @ret
end
View 3 Replies
View Related
Jun 17, 2006
hi
i need to use only one stored procedure and access many tablesso how write a stored procedure for that dohelp me looking forward for a reply to the earliest i am developing web page using asp.net using c# and sqlserver as backend
looking forward for a replygayathri
View 1 Replies
View Related
Dec 15, 2006
I am interested to know about stored procedures in Mssql .Can anyone please help me out.
Thanx in advance.
View 1 Replies
View Related
Feb 24, 2007
Hello I have two stored procedures
@ID INT
AS
SELECT (CASE WHEN NUM >= 10 THEN CAST(PAID AS FLOAT) / CAST(NUM AS FLOAT) * 100 WHEN NUM < 10 THEN 0 END) AS PER
FROM (SELECT (SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Player_id = @ID)) AS NUM,
(SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Transaction_value > 0) AND (D.Player_id = @ID)) AS PAID) AS X
and
@ID INT
AS
SELECT P.*,'/' + DBO.GETCHIPFOLDER(@ID) + '/' + ISNULL(P.PHOTO,'BLANK.GIF') AS PIC,ISNULL(
(SELECT SUM(TRANSACTION_VALUE)
FROM EVENT_DATA WHERE PLAYER_ID=@ID AND TRANSACTION_TYPE=1
GROUP BY PLAYER_ID),0) AS WINNINGS FROM PLAYERS P
undefined P
The first returns a percentage for player wins, the second gives me a photo and sums the player winnings
I would like to combine the results so I can get the percentage and wininngs in one query, in another matter all together I would like create a procedure like the first but instead of returning only one player, I would like to return the percentage for each player
Thanks in advance for any light you can shine on this.
View 4 Replies
View Related
Feb 25, 2007
I have a question about stored procedures, Is it better to use stored procedures even if I only use it once at my site? Or is it better to write the sql-part directly in the sqldatasource?
And am I forced to create two different stored procedures even if they are exactly the same except the "Where-part"?
Now I have around 40 stored procedures, and quite many of them looks the same except the where-part...
(Iam just a beginner with SQL)
View 2 Replies
View Related
May 2, 2007
Hello every one,
I m working in aspx 2.0 with sql server 2005, please tell me how can I create Stored Procedures for two or more tables not a single table(select,insert,update,delete please send me the queries which can help me in easy way I will very thankful to you
Thank you
View 5 Replies
View Related
Jun 19, 2007
I am learning to make a ASP web site and feel that if i can do it the harder way using some stored procedures instead of using multiple datasources on each page requiring that it might be better. So i am wondering what are these used for:DECLARE vs just entering "@param1 varchar(30)"When i use "DECLARE @rc int" i get the error "Incorrect syntax near DECLARE"How to return values to ASP page in Visual Studio 2005 How to use @@rowcount - doesn't seem to work for me?i tried using DECLARE @rc intSET @rc = @@rowcountWhen to use GO, BEGIN etcIf i want to use the variable only in the procedure, and not needed to be inputed, do i need to put it in the CREATE PROCEDURE (section)?Should i use my own stored procedures or VS2005 created ones using datasources? not really procedures but SQL, in SQL can i do like IF ELSE? if i use my own i cant use the Optimistic Concurrency right? and whats that?
View 1 Replies
View Related
