Logging Of SSIS Package Doesnt Work When Executed As A Job
Mar 31, 2006
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
After moving my deployment folder to the Target Server, I run the Installation Wizard. As I move next, I am missing the window which is supposed to allow me to set package config values as stated in MSDN:
"If the package includes configurations, you can edit updatable configurations by updating values in the Value list on the Configure Packages page."
Does anyone know why I am not seeing it? In my deployment bundle which I have moved over has currently 3 files:
1) SSIS Deployment Manifest
2) SSIS Package
3) SSIS Config File
Again, I double click on SSIS Deployment Manifest, and it starts fine. I go thru the steps for File System Deployment, and then it prompts for installation folder path. After that, it takes me directly to validation. Why is it not showing me the Configure Packages Page as described in the MSDN Documentation. Please advise. Thanks.
I am a newby to SSIS and it has been around 2 weeks since I have started with SSIS in my project.
Now, I have been able to successfully build the SSIS package for my project need which is to export all the data from excel source file to the destination database tables after certain validations and modifications. So, when I run the package from the Visual Studio, it runs fine, but actually we have to call the SSIS package from the Webpage through ASP.NET. I have used following code, for loading and executing the package on the page load event.
// Load package from file system Package package = app.LoadPackage("C:\Monitor 3\EEObjectImportSSISPackage\ImportCustomPointObject.dtsx", null);
Variables vars = package.Variables; vars["selectedArea"].Value = 1050;
DTSExecResult result = package.Execute(null, vars, null, null, null); }
All the connections and the log details are configured in the package itself. I am not much expert on the how to configure the package properly, as this is my first hands on effort at SSIS.
Unfortunately, I am not able to execute the package from the above piece of code. I have tried referring to various blogs, but none could come to my rescue. On the page load, it generates the log which notes below errors.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1071611876,0x,SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1073450985,0x,component "Excel Source for CustomPoint object" (1) failed validation and returned error code 0xC020801C.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1073450996,0x,One or more component failed validation.
OnError,PRODSK0418,PRODSK0418ASPNET,Filling table from Excel file after validation,{81E15B75-B9B8-48EB-9B46-936C240EF9E0},{A0D5ECDF-E6CA-41AD-A9A5-1FF66E027FA1},12/13/2007 4:20:48 PM,12/13/2007 4:20:48 PM,-1073594105,0x,There were errors during task validation.
Can any one please give me your expert advice on this matter and help me in solving the problem? I am in real need to get this solved.
Hope to get your quick reply n this matter. Please feel free to let me know in case of any questions in this matter.
I have a very anoying problem with SSIS. I've done new packages into same project, almost identical compared to old ones. They work well in visual studio, but I can't execute them using procedure. Old packages works just fine, but none of the new. Error message is in the end of my story.Visual Studio version is 9.0.30729.1 and SQL Server version is 10.0.4000.0. Is it possible, that these not not updated versions could cause this problem?Package ProtectionLevel is DonSaveSensitive.
Error messages, when package is executed by procedure: Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. NULL Started:Â 10:36:48 AM Error: 2015-03-31 10:36:48.48 Â Â Code: 0xC0016016
We have a package that has a connection called Load_DimItem.trc. We don't need this logging enabled for this package anymore. However, if I delete the connection, and delete the log provider (SSIS log provider for SQL profiler), I get errors when trying to close the package after debugging. I get: "Cannot detach from one or more processes. [3172] The object invoked has disconnected from its clients."
I am logging all the tasks in my SSIS package to SQL Server. For each task I am logging atleast the Pre-Execute, PostExecute, OnError events. For Script tasks, I have custom logging and I am logging the ScriptTaskLogEntry event too.
When I run the package manually from BIDS, the logging works great ! But when I try to run the package from a job or from the command line, the number of events that is logged greatly reduces. For eg. when manually run, I get 104 records in the log table but when run from the command line I get 23 records only. Most of the custom logging messages from the Script Task do appear. Its the pre and post-execute events that are skipped. Any idea why ?
Here is command line from the job. I also use the same command line with "dtexec" from the command prompt.
I am using the "SSIS Log Provider for SQL Server" to log events to a table for "OnError" and "OnPostExecute" events of a package. This works as expected and provides a nice clean output on the execution steps of the package.
I am curious as to why I do not see any detail for any/all tasks that fall under the "Data Flow" section of the package though. For instance, on my "Control Flow" tab, I added a "Data Flow" task that simply loads a few tables from a target to destination server. However, there is nothing shown in the logging output. Just that a Data Flow task was initiated. And when I'm configuring this logging under "SSIS-->Logging" in the checkbox area on the left, you cannot "drill into" data flow steps.
Is there a reason why there is no detailed logging for Data Flow tasks? Would getting to that require me to create a custom log provider?
i am new at T-SQL and am trying to delete entries in a column that are not integers. i have the following code. why does it not work.
T-SQL
select invoicenumber from [control register] where convert(int, invoicenumber) like '%' if @@error > 0 begin delete from [control register] where invoicenumber = invoicenumber end go
gives me the error in Query analyser:
Server: Msg 245, Level 16, State 1, Line 1 Syntax error converting the nvarchar value '10-3-05' to a column of data type int.
@@error is supposed to pick up the error. why is it not.
please could you reply urgently at chris@captivedesign.co.za
can someone tell me why this sql statement doesnt work?
SQL = "SELECT (Count(department_id) as 'totals' FROM nonconformance WHERE department_id = '7'),(Count(department_id) as 'totals2' FROM nonconformance WHERE department_id = '1') FROM nonconformance"
Can someone tell me why this thing in the end return Null?
declare @uz_id uniqueidentifier set @uz_id=null set @uz_id= case @Uz_ID when null then '00000000-0000-0000-0000-000000000000' else @Uz_ID end select @uz_id
...it should return '00000000-0000-0000-0000-000000000000' in my opintion
P.S. When I say return i mean the value that is shown after 'select @uz_id' is executed:)
This is an insert statement i'm trying to run. I want it to only insert this recird if the corresponding EMPLOY_REF exists in the EMPLOYEE table. Heres my statement:
INSERT INTO SALHISTY(EMPLOY_REF, SALARY, SAL_REASON, SAL_DATE) VALUES ('8971','175000.0000','ANNRV','2007-04-01 00:00:00.000') WHERE '8971' IN (SELECT EMPLOY_REF FROM EMPLOYEE)
This is the error message i'm getting.
Server: Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'WHERE'.
from ( select count(*) as Patients, [pct of res] as pct from testing where [18 week wait] <= 18 group by [pct of res] ) as a right outer join (select distinct[pct of res] from testing) as c on a.pct=c.[pct of res]and a.pct <> 'null' --is not null
(select count(*) as Patients, [pct of res] as pct from testing where [18 week wait] >18 group by [pct of res] ) as a left outer join as b on c.[pct of res]=b.pct
I have the following in my commandtext but it doesnt seem to replace the LanguageColumnName variable: Dim cmd As New SqlCommand("SELECT '+@LanguageColumnName+' FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCode", MyConnection) cmd.Parameters.Add(New SqlParameter("@UserCode", UserCode)) cmd.Parameters.Add(New SqlParameter("@LanguageColumnName", LanguageColumnName))I have tried '+@LanguageColumnName+' and also just @LanguageColumnName but this variable isnt replaced for some reason.The value of LanguageColumnName is "de"...the funny thing is that when I just type my command like the following it DOES work..:SELECT de FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCodeWhat am I doing wrong?
I have my db in a pocket pc wm5.0, I just want to make a simple query select * from table where pk = '1' but this doesnt work, if you tried any other field else than the primary key it works... WHY???
would it be a problem with the sdf file? help please!!!
I have an issue. When I am performing a Merge Join using two fields of type DT_WSTR on both sides of the Join, the Dataviewer after the Join only shows the left side 2 key fields having values populated but both fields from the right hand side as being NULL. The Dataviewers I put in before the join show both sides of the join fields being populated ( 2 sides x 2 fields ). If I remove one of the fields from the join it shows both fields from the left side and the right side of the join being populated . I am trying to knock out duplicate values from the insert using 'genuine' Nulls from the right hand side so I need both parts of the 'Key'. I have checked the adnvanced tab that ignores Case etc but has had no effect.
I am using the technique from here : http://www.sqlis.com/311.aspx
Is this an SSIS bug ??? It is driving me up the wall.
HI All,I have started sqlserver in single user mode and changed filename in sysaltfiles for tempdb too point to new location. While starting sqlserver in normal it points to the old path and doesnt get updated with the new path.1.)is there any systable still to be altered???2.) i have even tried alter database, doesnt work.3.)The master files have been taken from server1 (where tempdb points to d:data) to server2 ( where i need to point tempdb to point E:mssqldata). i can detach and attach msdb and model successfully, but in the case of tempdb, i cant either alter sysaltfiles or detach and attach tempdb to new path., too tired in trying all the possiblities... Is there any possibility to update tempdb to point to new path???
i've made a report containing a subreport. the subreport is in a table. the table headers should repeat. but if the subreport expands more than one site, the table header doesnt repeat.
okay. i could place the table header in report header, but in report header i cant use fields from a dateset.
Hi, I decided to use the SQL Server log provider to store logging data of all my Integration Services packages. I also created some reports about this data for operating purposes. I have a problem occurs the name of the executing package is not always written to the log,but the name of the single task which failed. But that is not very useful information for operating, because I do not see any chance to get the name of the package by the information which is logged in the sysdtslog90 table in the database which I defined for SSIS Logging.
How do I configure the package to always log the package information into the table, too?
hi, i hope this is the correct forum?i have developed a small asp.net 2.0 web site with vwd using sqlExpress which appears to just bean data file and a log file in my app_data directory. there are two databases, the users one that is created by the login manager and my own that i created to store data. this all works fine on my laptop. i have an xp-pro machine setup with IIS and the frontpage web extentions, i have also installed the .net framework v2.0 on it and done all the windows updates. i have given app_data read/write access for the aspnet and network service users.i used the copy site feature of vwd to install on the xp box and although the site seems to workwhen it needs to bind a gridview to my sqldatasource it gives an error Cannot open user default database. login failed.Loginfailed for user 'rlxpaspnet'Any ideas? i have googled and tried all sorts, but to no avail, so i throw my self on your mercy!Cheers,russ
I've a problem with my database. Till yesterday the option for Auto Grow of Database (10 %) was working very fine, but now it seems to be some problems with it. Finally I had to specify a restricted size for the database and then it again startd to give me some space in the database to write in. Ideally it should have worked automatically, isnt it ???
There is no problem with the space on the drive, I still have some 76 gb of free space there ...
Hello, I tried this and it doesnt work, I just started up the service with -T flag on default instance but I havent been able to start it with -T flag 1400 on named instances.
How can I Know that the directory MSSQL.4 is the MIRROR instance??
C:Archivos de programaMicrosoft SQL ServerMSSQL.4MSSQLBinn>sqlservr.exe -T 1400 MIRROR
I tried LUCHOMIRROR, MSSQLSERVER$MIRROR
and It doesnt work
Thanks
Another question I have, in the documentation it says that mirroring is only for evaluation purposes and not for production environments, what does it suppose to mean? MSFT didnt test the mirroring feature enough? If its not suppoerted why its included..?
Microsoft support policies do not apply to the database mirroring feature in SQL Server 2005. Database mirroring is currently disabled by default, but may be enabled for evaluation purposes only by using trace flag 1400 as a startup parameter. (For more information about trace flags, see Trace Flags (Transact-SQL).) Database mirroring should not be used in production environments, and Microsoft support services will not support databases or applications that use database mirroring. Database mirroring documentation is included in SQL Server 2005 for evaluation purposes only, and the Documentation Policy for SQL Server 2005 Support and Upgrade does not apply to the database mirroring documentation.
I need info from 2 Tables. from the Table 2 I just need 1 column. When i ask for this column the output I get is data repeating themselve many times.
Distinct, should give me unique data, but is doesnt.... the code:
SELECT DISTINCT FSenddate, FSupplyIDName, FSupplyerNumber,FBillNo,FSourceBillNo,FItemName,FItemModel, FAuxQty,FAuxTaxPrice,FHeadSelfP0237 FROM vwICBill_26 WHERE FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
This code just works in Table1 (vwICBill_26)
but with table 2 (vwICBill_1)
SELECT DISTINCT vwICBill_26.FSenddate,vwICBill_26.FSupplyIDName, vwICBill_26.FSupplyerNumber,vwICBill_26.FBillNo, vwICBill_26.FSourceBillNo,vwICBill_26.FItemName, vwICBill_26.FItemModel,vwICBill_26.FAuxQty, vwICBill_26.FAuxTaxPrice,vwICBill_26.FHeadSelfP0237, vwICBill_1.FDate,vwICBill_1.FContractBillNo FROM vwICBill_26,vwICBill_1 WHERE vwICBill_26.FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE() AND vwICBill_1.FContractBillNo=vwICBill_26.FSourceBillNo
The last sentence is the problem I want that it shows me the data that is not equal. As soon as I implement the not equal it shows me the massive repeating data. I mean even without the last sentence I get this data output.
All together, I want a clear database output without data repeating. Any ideas how it may work without DISTINCT?
I think this problem is a typical amateure problem, but I would apreciate help!
Msg 1008, Level 16, State 1, Procedure P_SEL_ALLPERSONAS, Line 13
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
The distributed query seems to work on the management studio of the server where I have linked the other server to but not accross the network on other management studio with the same impersonated logins. The error I get is.
OLE DB provider "SQLNCLI" for linked server "usbo-sql01" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18452, Level 14, State 1, Line 0
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Normal] From: XXX "(DEFAULT)" Time: XXX SQL statement: BACKUP DATABASE [msdb] TO VIRTUAL_DEVICE = "Data Protector_(DEFAULT)_msdb_06_00_14" WITH NAME = 'Data Protector: 2007/08/01 0064', DIFFERENTIAL, BLOCKSIZE = 4096, MAXTRANSFERSIZE = 65536; [Warning] From: XXX "(DEFAULT)" Time: XXX Error has occurred while executing a SQL statement. Error message: '<Microsoft SQL-DMO (ODBC SQLState: 42000):bdb> [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot perform a differential backup for database "msdb", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option. [Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.'
Ive tried to do a full followed straight after by a diff but doent help.
in both vs2008 I added a ReportViewer control to my WinForm, intending to render an RS 2005 report remotely. In the design pane (Report Viewer Tasks Popup) I specify <server report>, URL http://server name/reportserver$instance name path /folder/report name
I started getting a msg saying "the source of the report definition has not been specified". If I hit refresh, the report renders. Before I started playing with the designer setting, and only had the c# stuff specified, I wouldnt even get the message, the control would appear with all RS buttons (eg page forward arrow etc) disabled.
Does anybody know why the message is appearing and how to get c#'s settings to work immediately like designer settings?
I just upgraded to SQL server 2005 and some of my Openrowset to Oracle doesnt work. I found out that the issue occur with field with structure Numeric.
The issue is not solve even when I try to cast the field to varchar. sometimes it succeeded and sometimes I get error 7320 & 7321.
While installing SQL Server 2005 Enterprise Edition on Windows Vista Ultimate the setup alerts me "there are known compatibility problems, please install SP2 after this". So ok, all went nice and installed without error. IIS 7 installed fully, so all green in setup display. (But after installation i do not see any service which begins with SQL***...) At the end, the setup wanted to start the administration Tool. Ok, but my name was not listed, so i could not add me to the permitted users. I can not use any tool, because i have no rights.
Some Ideas?
Microsoft SQL Server Management Studio 9.00.3042.00 Microsoft Analysis Services-Clienttools 2005.090.3042.00 Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205) Microsoft MSXML 3.0 4.0 5.0 6.0 Microsoft Internet Explorer 7.0.6000.16546 Microsoft .NET Framework 2.0.50727.312 Betriebssystem 6.0.6000