Login Failed For User 18456 When Using Asymmetric Key For Login
Dec 26, 2005
Hi,
I wanted to check the asymmetric key option in sql 2005. I copied the books online code for creating a asymmetric key and then used this key for creating a login. Now when I try to login without entering any password I am receiving 18456 error. I would like to know what I am missing here. If I use CREATE LOGIN from asymmetric key or certificate how do I login and with what credentials. Do I need to provide any password.CREATE ASYMMETRIC KEY PacificSales09
WITH ALGORITHM = RSA_2048
ENCRYPTION BY PASSWORD = 'bmsA$dk7i82bv55foajsd9764';
GO
CREATE LOGIN asm FROM ASYMMETRIC KEY PacificSales09;
Regards,
Ravi
View 5 Replies
ADVERTISEMENT
Feb 12, 2001
I get this error when trying to connect. I'm using the sa id and password for all of my odbc connections. It fails when trying to connect to this one but it's ok on a couple of others I've set up with the same id etc.
Where is this "" coming from and how to avoid it in the future?
I've removed and recreated the connection to be sure that I didn't actually type that in as the id....hey it's monday...it could happen.
View 2 Replies
View Related
Aug 8, 2007
I am running several instances of SQL Server 2005 sp2 on a W2k3 sp2 box (member server).
This morning, I installed reporting services to one of my instances and shortly after noticed I was getting the following two messages in my SQL Server log file:-
08/08/2007 11:05:03,Logon,Unknown,Login failed for user 'DOMAINDOMCONTROLLER$'. [CLIENT: xxx.xxx.xxx.xxx]
08/08/2007 11:05:03,Logon,Unknown,Error: 18456, Severity: 14, State: 16.
The above entries were each repeated 6 times every 15 minutes but with State 11. I created a logon for the above, and now get the above messages (state 16) repeated 3 times every 15 minutes!
Any ideas why?
Regards
Ian
View 1 Replies
View Related
Jun 19, 2007
SQL2000 SP4 (SQL and Windows authentication) on Win2000SP4. Event ID 17055 (18456: Login failed for user 'sa'.) is being logged at an average of 20 times an hour. Tried to run SQL Profiler but it no trace information on the source (host, ip or application) of the failed login. Some forums suggest to unplug the server from network to know if its a local or networked issue but this is not possible in my case. Acquiring firewall/router logs from Network team is a headache. Any help on pinpointing what/where is this failed login coming from is very much appreciated.
View 1 Replies
View Related
Feb 22, 2007
Hello.
I get this error when I try to connect to my SQL Server with JDBC:
Excepcion en MyPool Pool.getNewConnection() [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Cannot open database "lituania" requested by the login. The login failed.
And in the ERRORLOG I get:
2002-02-22 19:59:46.62 Logon Error: 18456, Severity: 14, State: 16.
2002-02-22 19:59:46.62 Logon Login failed for user 'frontend'. [CLIENT: 10.0.0.75]
I found it is supossed to be a password mismatch:
http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
but I checked the password is correct.
Any ideas? Thank you in advance.
View 8 Replies
View Related
Apr 3, 2008
A user is trying to connect to a server via windows authentication from SQL management studio on her desktop.
The log file on the server gives:
Login failed for user: domain1user1
Error : 18456, Severity: 14, State: 11
The strange thing is that the user in the error above is not the user she's trying to connect as (domain2user2, say).
user2 can remote desktop to the server and log in there.
I know this state implies "Valid login but server access failure".
Has anyone run into this, and what more information would be useful to know? Thanks!
View 5 Replies
View Related
Aug 25, 2006
I just upgraded SQL Server 2000 to 2005 without any errors. Afterwards, I tried registering with sa and it failed. I registered with another sysadmin login to get into most of my databases, but I need sa to work for my backup software Idera SQLSafe to login to the database.
Does anyone have any experience or recommendations? I know my password is correct.
Mindy
View 4 Replies
View Related
Apr 10, 2008
Hi All,
I get below error when I try to logged into my web site.
Error: Login failed for user 'username'
Below is the event log at that time.
Error: 18456, Severity: 14, State: 8.
my web site working fine since last 5 months & from yesterday i was getting this error.
the thing is, the behavior of this error is not consistent.
Appreciate your help.
Below is the strack trace:
Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at User..ctor(String vzid)
thanks in advance,
prashant
View 5 Replies
View Related
Feb 6, 2008
Hi,
can someone help me with this error.
Error: 18456, Severity: 14, State: 16
Login failed for user 'NT AUTHORITYSYSTEM' [CLIENT:<local machine>]
I've found several Threads but not with the NT AUTHORITYSYSTEM.
Thanks for help.
Jens
View 8 Replies
View Related
Aug 25, 2007
Please help I keep getting this message when I log on to my data base. Not sure what state 1 relates too
TITLE: Connect to Server
------------------------------
Cannot connect to <server_name>
------------------------------
ADDITIONAL INFORMATION:
Login failed for user <user_name>. (Microsoft SQL Server, Error: 18456)
------------------------------
BUTTONS:
OK
------------------------------
Server Name: <server~name>Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
View 13 Replies
View Related
Mar 3, 2008
hi,
i am getting the following error message while i am trying to login to the SQL Server 2005 on my vista laptop. i installed the server with dual authentication modes.
Login failed for the user'xxxx'(Microsoft SQL Server 2005. Error:18456)
if you have solution for my problem please send a reply as early as possible.
thanks,
ravi kishore.ch
View 12 Replies
View Related
Mar 18, 2007
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
View 6 Replies
View Related
Oct 27, 2004
Hi,
Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()
Source File: C:finalyearproject2sample.aspx Line: 15
Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
View 3 Replies
View Related
Jul 27, 2005
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View 9 Replies
View Related
Dec 19, 2003
I am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
View 5 Replies
View Related
Apr 16, 2008
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
View 4 Replies
View Related
Nov 22, 2007
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
View 3 Replies
View Related
Jun 17, 2007
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
View 1 Replies
View Related
Oct 22, 2007
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
View 5 Replies
View Related
Feb 28, 2007
As an 'SA' I thought that you have permission to do anything on the server. Running an update command from Query Analyzer is throwing this error:
SQL Server 2000 SP3
Server: Msg 18456, Level 14, State 1, Line 1
Login failed for user 'sa'.
The table is in the dbo schema.
Has anyone seen this error before?
View 12 Replies
View Related
Mar 13, 2007
We have a SQL 2000 Active/Passive cluster running on Windows 2000. On one node, everything logs in fine (second node is powered off). I can use local authentication fine in OSQL (-E) and even see my connection in SQLEM current activity as [DomainUser] for the NT account which I am logged in as. Then I bring the second node online and initiate a failover. SQL Server starts but Cluster Admin cannot connect and starts throwing this Anonymous Logon error. I open a command prompt and try the same OSQL (-E) local login and sure enough it is also giving the Anonymous Logon connection user. I do not understand why the failover to a second node is causing the Trusted Connection Local authentication to switch to Anonymous instead of the [DomainUser] which I am using. Any help is appreciated. John.
View 1 Replies
View Related
Feb 4, 2008
I Guys
I am trying to create an application that writes data to a SQL database (studio express).
The application works fine but as soon as I open the table with the SQL server management studio express the application does not work any more displaying the following message:
€śCannot open user default database. Login failed. Login failed for user€¦€?
If I siwtch off and on the computer the problem disappear till the table will be open with the database management studio express!!!!!
How can I solve this annoying problem?
Cheers
View 5 Replies
View Related
Apr 18, 2008
Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated
Thanks
David
View 2 Replies
View Related
Sep 20, 2007
Hi all,
Iam getting this error
System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'.
when trying to open the page....
http://localhost:1807/projectname/WebFormName.aspx
as
http://localhost/projectname/WebFormName.aspx
Couldnt figure out the solution.Please help
Soujanya
View 2 Replies
View Related
Mar 5, 2008
Hi,
Last night I setup my MOSS 2007 server and SQL 2005, I got everything working fine in short order.
I had forgotten to look for updates for SQL 2005 so i decided I would run Windows Update.
SQL Server 2005
Critical Update for SQL Server 2005 Service Pack 2 (KB 934458)
Tuesday, March 04, 2008
Microsoft Update
SQL Server 2005
Microsoft SQL Server 2005 Service Pack 2 (KB 921896)
Those two updates were applied, then after a reboot I began getting the login failed error.
I can login using windows authentication as DOMAINAdministrator, I can also login as SA, but i am trying to figure out why it is denying me logins as DOMAINSharepoint
Has anybody had prior experience with this or know what the deal is?
TIA,
-Drew
View 3 Replies
View Related
Oct 18, 2007
Hi,
I am trying to create a linked server between 2 SQL Server 2005 boxes.
When I create the linked server I specify a login for the connection.
The strange part is that I get the following error when it goes to test the connection:
The test connection to the linked server failed
Login failed for user 'Domainuser'. (Microsoft SQL Server, Error: 18456)
I can use the SQL mangement studio to conenct to the database using this same login.
The login has all the server roles assigned to it also.
Can anyone shed some light as to what may be the problem?
Thanks,
View 5 Replies
View Related
Feb 26, 2007
Greetings...
I'm trying to create assembly with "PERMISSION_SET = UNSAFE".
For that I've signed assembly's .dll and installed root certificate to €śTrusted Root Certificate Authority.€?: http://www.sqljunkies.com/WebLog/ktegels/articles/SigningSQLCLRAssemblies.aspx
now I'm trying to create login from asymmetric key:
USE master
GO
CREATE ASYMMETRIC KEY SQLCLRTestKey
FROM EXECUTABLE FILE = 'C:Documents and SettingsAll UsersDocumentshunterStoredProcedures.dll'
CREATE LOGIN SQLCLRTestLogin
FROM ASYMMETRIC KEY SQLCLRTestKey
but I'm receiving error: "Cannot find the asymmetric key 'SQLCLRTestKey', because it does not exist or you do not have permission."
What's wrong?
Best regards...
View 6 Replies
View Related
Sep 9, 2015
Many a times see the below error in SQL Error log.
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Is this something to do here?
Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?
CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS
View 1 Replies
View Related
Mar 3, 2008
Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
View 3 Replies
View Related
Apr 25, 2007
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
View 1 Replies
View Related
Aug 19, 2006
Hi,
I have a copy of VS2005 and i have installed the Microsoft SQL Server Developer Edition
I am trying to do my first connection using ASP.net (yay for me...) and it has failed...with this error..Login failed for user 'testuser'. The user is not associated with a trusted SQL Server connection.
can someone please point out why? yes i know that the error seems pretty straight forward but how do i fix it? like how do i make the user a trusted server connection? where do i do it? and what are the steps? the user is an administrator and by rights should have all access to everything....
connection string
SqlConnection MySQLConnection; MySQLConnection = new SqlConnection("server=cmptrname\databsename;uid=testuser;password=password;database=mytest");
btw while your reading do you have any examples of opening a db with the connection string in the web.config file? because i get some error "connection string has not been initialised" using the
system.Configuration.ConfigurationManager.AppSettings.Get
i though i would stick to the top code first before i tackled the web config error first....
Thanks heaps
View 10 Replies
View Related
May 1, 2007
I need help. The security principal is the correct DomainUser, but the error message says I am not authenticated.
So here is my error Message:
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Me.User.Identity.Name=CompanyDomainRyan; System.Security.Principal.WindowsIdentity.GetCurrent=CompanyDomainRyan; HttpContext.Current.User.Identity.Name=CompanyRyan
Generated by:
Dim secPrinc As System.Security.Principal.WindowsIdentity = System.Security.Principal.WindowsIdentity.GetCurrent
Me.lblError.Text = ex.Message & vbCrLf & vbCrLf & "Me.User.Identity.Name=" & Me.User.Identity.Name & "; System.Security.Principal.WindowsIdentity.GetCurrent=" & secPrinc.Name & "; HttpContext.Current.User.Identity.Name=" & HttpContext.Current.User.Identity.Name
Here is the Connection String:
Private ConnString As String = "Server=10.144.162.111;Database=DNS;Trusted_Connection=True"
IIS has 4 websites hosted on it. The parent level allows anonymous with windows auth off, but the website level has anonymous off with widnows auth and digest.
In IIS, is there a problem with having the parent level anonymous and website level windows auth?
View 1 Replies
View Related
Feb 18, 2008
All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode. I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem?
my connection string: <connectionStrings>
<add name="ConnectionString" connectionString="Data Source= server name ;
Initial Catalog=FILESHAREDB.MDF;
Integrated Security=false;"providerName="System.Data.SqlClient"/>
</connectionStrings>
Server Error in '/SendItNow' Application.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:
Line 41:
Line 42: 'open the connection and execute the stored procedure
Line 43: mConnection.Open()
Line 44: mResourceID = mCommand.ExecuteScalar()
Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb Line: 43 Stack Trace:
[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ResourceDB.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message, Int32 ID) in H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb:43
Resource.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message) in H:MIS DepartmentIntranetSendItNowApp_CodeBllResource.vb:31
ContentFiles_Default.ImageButton1_Click1(Object sender, ImageClickEventArgs e) in H:MIS DepartmentIntranetSendItNowContentFilesDefault.aspx.vb:33
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
View 2 Replies
View Related
