Login Failed On A Newly Created Database
Mar 10, 2007
Hi!
I have a piece of code that connects to the master database and uses the simple 'CREATE DATABASE MYDATABASE' statement to create a new database on an sql server 2005 express instance.
I then close that connection and try to open a new connection using my newly created database. I use integrated authentication in both cases. However, I get the following error: Cannot open database "MYDATABASE" requested by the login. The login failed.Login failed for user 'DOMAINNAMEusername'.System.Data.SqlClient.SqlException: Cannot open database "MYDATABASE" requested by the login. The login failed.
I don't get this error all the time. I tried to run my code many times and it some times work. But in some cases it doesn't. The database is always created but some times I cannot connect to it. But again, if I wait a little and try again with the same database, the connection is made.
I know that my connections are opened and closed normally and they don't remain open. So I don't believe I reach the maximum number of available connections.
I also sometimes get this exception : A connection was successfully established with the server, but then an
error occurred during the login process. (provider: Shared Memory
Provider, error: 0 - No process is on the other end of the pipe.
Any clue?
View 5 Replies
ADVERTISEMENT
Jun 18, 2008
I created a database called sports and then created a table which I'm going to use as a template for other tables within the same database.
What is the proper way to structure and implement copying this template table?
Should I store the template table under the system tables folder?
How do I copy the template table and create a new table from this template?
Thanks you
Goldmember
View 3 Replies
View Related
Jul 15, 2015
I am setting up SQL audit on sql servers in my environment based on requirement. I want to create database specifications ASAP database created. I tried DDL trigger but Audit doesn't support triggers. So I created audit specifications on model database. the only problem with this is every specification created on new database with same name.database specification name includes newly created database name or other methods to create database specifications on newly created databases.
View 6 Replies
View Related
Mar 23, 2008
I created a new database in SQL Server 2000, using the command
"CREATE DATABASE ContactManager ON PRIMARY(NAME = ContactManager,FILENAME ='C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf',SIZE = 5MB,MAXSIZE = 20MB,FILEGROWTH = 5MB)LOG ON(NAME = ContactManager,FILENAME = 'C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.ldf',SIZE = 2MB,MAXSIZE = 10MB,FILEGROWTH = 2MB)Go"
Databse was successfully created and I created two tables also in it. Now when i try to create a new connection in Visual Web Developer 2005, I get the error message :
"Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf" failed with the operating system error 5 (Acess is denied.).
Cannot attatch the file "C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf" as 'ContactManager'."
What else do I need to do use the database?
View 7 Replies
View Related
Mar 18, 2007
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
View 6 Replies
View Related
Oct 27, 2004
Hi,
Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()
Source File: C:finalyearproject2sample.aspx Line: 15
Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
View 3 Replies
View Related
Jul 27, 2005
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View 9 Replies
View Related
Dec 19, 2003
I am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
View 5 Replies
View Related
Apr 16, 2008
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
View 4 Replies
View Related
Nov 8, 2007
hello, i have a problem in my sql. im using a stored procedure and i want to get the newly created id number to be used to insert in the other table.it works like:insert into table() values()select @id = (newly created id number) from tableinsert into table1() values(@id) something like that.
View 2 Replies
View Related
Feb 17, 2000
I am trying to execute three dts packages from a Job that I created. When creating the steps I am setting the Type To: Operating System Command(CmdExec).
The Command I am using is: dtsrun /S servername /E /dtsPackageName
For some reason whenever I try to run thes jobs it fails. Within this Job I have three steps. For each step I am using the same job but with a different package name. I have a trusted connection so my command should work just fine. What am I doing wrong. Can some please explain this process.
Thanks
View 1 Replies
View Related
Apr 12, 2015
I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case, or am I doing something wrong here ?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution for me ?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me.And now I have to do various calculations that involve making use of both these type of columns.
View 2 Replies
View Related
Feb 21, 2006
Hi
I had DTS the Northwind sample database from SqlServer 2000 to 2005. It's went ok and no errors. Then, I created a SP named upGetCustomer, bascially it queries the Customers table and list some of it's fields and order by CustomerId,CustomerName, Country decrementally. SP is so simple and has no errors.
Then, I created a SqlServer project in VS2005 using C#. Add store procedure class as below,
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
public partial class StoredProcedures
{
[Microsoft.SqlServer.Server.SqlProcedure]
public static void Customers(string customerid)
{
using (SqlConnection sqlConn =
new SqlConnection("context connection=true"))
{
sqlConn.Open();
SqlPipe sqlPipe = SqlContext.Pipe;
SqlParameter param = new SqlParameter("@custId", SqlDbType.VarChar, 5);
param.Value = customerid;
SqlCommand sqlCmd = new SqlCommand();
sqlCmd.CommandType = CommandType.StoredProcedure;
sqlCmd.CommandText = "upGetCustomer";
sqlCmd.Parameters.Add(param);
SqlDataReader rdr = sqlCmd.ExecuteReader();
SqlContext.Pipe.Send(rdr);
}
}
I had taken method of created SQLCLR from source in Microsoft website, but coding is mine, and hopes it is correct. I used SqlConnection string as 'context connection=true' which I still not quite sure what does it means, hopes it mean current connection I am using on my Windows authentication.
The project did compiled & deployed OK on the VS2005 side.
The problem is that when I tried to locate the assembly on the Sql Server 2005, but can't find it anywhere on Sql Server.
I did try complied and deloyed again, it keeps saying there is an error in deployment as customers assembly is already exist on the database. I then, tried to remove this assembly on the database using SQL script, drop assembly customers in the Northwind database but got error saying it does not exist. So where is it???
Please help...
Thank you
View 1 Replies
View Related
Jun 17, 2007
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
View 1 Replies
View Related
Apr 12, 2015
I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me. And now I have to do various calculations that involve making use of both these type of columns.
View 4 Replies
View Related
Aug 2, 2014
I have a table that I have created a table and desire to do some basic math by adding a few new columns. The problem is that i cant get this to work without create many new select statements. The new columns that I wish to add refer to other newly created columns. Is there a way I can do this with CTW or subqueries? Unless it is a best practice to chain out the logic for the newly created columns
I have an example from AdventureWorksDW since the data is very accessible. I can safely create EMP_TENURE and PTO_REMAINING is this select statement. I would then need to create a new select statement to define 'BONUS' and then another select statement to define 'NEW_COL1' and so on.
Im still pretty new at SQL and am trying to learn how to complete such a task using subqueries or CTE.
SELECT
NAME = [LastName] + ',' + [FirstName]
,HireDate
,Title
,DepartmentName
,BaseRate
,VacationHours
,SickLeaveHours
[Code] ....
View 1 Replies
View Related
Sep 11, 2014
I have many new tables for which i need to write Insert,Update and delete triggers manually. Is there any way to generate triggers script which takes table name as a input parameter and print/generate trigger's script?
View 1 Replies
View Related
Sep 18, 2015
Why are the user databases that were created in the MSSQLSERVER default instance showing up in the newly created ALPHAONE instance? I'm successfully logging into the alphaone database as it shows as "DASAlphaOne,1xxxPport) at the top of the treeview in ssms. I'm logging in as sa and can edit anything.
The issue here is that all the user databases are shown and can even be edited. I created this instance in an effort to hide databases from whoever is not supposed to see.I was expecting a clean instance with only the system databases..Is there something that can be set to keep each instance's databases private into itself?
View 8 Replies
View Related
Apr 2, 2007
We've been running a mirrored database (using certificates since we don't have a domain) and it's all working well. Last week we decided to add a witness for automatic failovers, but for some reason I just can not get the witness to connect to the Partner2 server.
See screenshot here
Please help me troubleshoot this - I re-created the endpoints / users / certificates but it's still not working. Where can I get more information on what exactly the problem is? Can I test the endpoints somehow?
View 9 Replies
View Related
Jul 20, 2006
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
View 2 Replies
View Related
Jul 20, 2006
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
View 1 Replies
View Related
Aug 29, 2006
Hello Guys
This is my connection string
<add name ="ASPNETDBConnectionString1" connectionString ="Data Source= .SQLEXPRESS; Integrated Security = True; DataBase = ASPNETDB.MDF; User ID = MyWindowsUserName; Password = MyWindowsPassword; User Instance = False; Connect Timeout = 30" providerName ="System.Data.SqlClient"/>
I tried to research on the internet and i got a solution on changing the permissions for this database to enable user SystemName/ASPNET, but iam not able to access this ASPNETDB.MDF from SqlServer and if i go to server explorer in vs2005, i dint know where to chage the permissions.
Can anyone help me on this.
Thanks a lot
View 15 Replies
View Related
Apr 12, 2015
I am new to SQL Programming. I am learning the basics. I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case, or am I doing something wrong here ?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution for me ?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me. And now I have to do various calculations that involve making use of both these type of columns.
View 8 Replies
View Related
Jun 17, 2015
I run a query
select col1, col2, col3, col4
from Table
where col2=5
order by col1
I have a primary key on the column.The execution plan showing the clustered index scan cost 30% & sort cost 70%..When I run the query I got missing index hint on col2 with 95% impact.So I created the non clustered index on col2.The total executed time decreased by around 80ms but I didn't see any Index name that is using in the execution plan.After creating the index also I am seeing same execution plan
The execution plan showing the clustered index scan cost 30% & sort cost 70% but I can see the total time is reducing & Logical reads on that table is reducing.I am sure that index is useful but why there is no change in the execution plan?
View 7 Replies
View Related
Sep 29, 2015
I am getting ready to start a project where I am charged with moving out old data from production into a newly created historical DB. We have about 8 tables that are internal audit tables, that are big and full of old data. These tables are barely used and are taking up way too much space and time for maintenance.
I would like to create a way (SSIS?) to look at the date field in each of the 8 tables and copy out anything older than two years into my newly created history DB. Then deleting the older records from the source DB.
I don't know if SSIS is the best method to use. If it is, what containers to use to move over data, then how to do delete from source?
Can I do the mass deletes on my audit source tables without impacting performance/indexes/fragmentation?
View 5 Replies
View Related
Nov 22, 2007
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
View 3 Replies
View Related
Apr 18, 2008
Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated
Thanks
David
View 2 Replies
View Related
May 14, 2008
Cannot open database "QuoteSystem" requested by the login. The login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
Last time I recieved this error I had to add ASPNet, NTAuthority, and myWebSiteUsers USERS under the database properties-->permissions setting for the specific database I am trying to access with the website but this database(QuoteSystem) does not lists any of these objects so I can add them. Does anybody know what I have to do to fix this?
I am using SQL Server 2005.
View 7 Replies
View Related
Aug 10, 2005
Please, can anyone tell me why I am getting the undermentioned error message when I develop my application as an IIS Site in Visual Web Developer 2005 Express ? I have already developed and successfully tested it as a 'FileSystem Web Site' .I am using SQLSErver Express 2005 edition and have which I have installed along with the Northwind database as per the download instructions. My IIS software is version 5.1 which I have checked and it is configured to allow Integrated Windows Authentication. the relevant code is (1) web.config file connection strings
<connectionStrings>
<add name="NorthwindConnectionString"
connectionString="Data Source=.sqlexpress;Initial Catalog=Northwind;Integrated Security=True"
providerName="System.Data.SqlClient"/>
</connectionStrings>(2) the grid view control and sqldatasource
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="CategoryID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="CategoryID" HeaderText="CategoryID" InsertVisible="False"
ReadOnly="True" SortExpression="CategoryID" />
<asp:BoundField DataField="CategoryName" HeaderText="CategoryName" SortExpression="CategoryName" />
<asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NorthwindConnectionString %>"
SelectCommand="SELECT [CategoryID], [CategoryName], [Description] FROM [Categories]">
</asp:SqlDataSource>This is the full error message and details:
Server Error in '/sqlservertest' Application.
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'JERRY-3C9615BAAASPNET'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684883
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1751
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +32
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601
System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1837
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +129
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1787
Version Information: Microsoft .NET Framework Version:2.0.50215.312; ASP.NET Version:2.0.50215.312
View 1 Replies
View Related
Sep 20, 2007
Hi all,
Iam getting this error
System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'.
when trying to open the page....
http://localhost:1807/projectname/WebFormName.aspx
as
http://localhost/projectname/WebFormName.aspx
Couldnt figure out the solution.Please help
Soujanya
View 2 Replies
View Related
May 9, 2008
Hi,
I just installed Visual web developper 2008 express with all options including SQL srvr express 2005!
This is from default iso image on the official website.
I create my first project and when I want to do ASP.NET configuration from web site menu, i got this error:
"Cannot open database "aspnetdb" requested by the login. The login failed."
I am just trying to learn here so i even did not create any dB or something, it is 1st time I run configuration to add security roles and users for testing!
I also un-installed all and re-installed, still the same...
pleas help and give me details as i am new.
kind regards,Golgot
View 12 Replies
View Related
Oct 12, 2007
Using SQL Server 2005 under XP Professional. I am attempting to log into the Server Management Studio as "UserX". I had previously been using Server Management while logged in as admin.
I now get this error message when attempting to connect to the database server:
**********************************************************************TITLE: Connect to Server------------------------------Cannot connect to [**NAME OF SERVER**].------------------------------ADDITIONAL INFORMATION:Login failed for user '[**NAME OF SERVER**].UserX. (Microsoft SQL Server, Error: 18456)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476------------------------------BUTTONS:OK------------------------------
*******************************
Microsoft help doesn't have a specific help for that particular error message. Any hints as to what is going wrong?
View 4 Replies
View Related
Mar 7, 2008
Hi,
I have created an asmx web service that deserializes a JSON string and should execute stored procedures in SQL Server Express 2005, the database is a mdf file. I have created a System DSN which works fine, I have allowed the remote connections and TCP/IP and created the firewall exceptions for sqlserver and sqlbrowser. I believe there's an issue with my connection string, I have tried everything and it still won't connect.
I had another running example but that was on a previous install of Windows XP Pro SP1 with login and this asmx web service worked fine. I run Windows XP Pro SP2 without a login now so I guess I can't use Integrated Security=true or Trusted Connection=yes but does anybody know the default login of a database created in Windows Visual Developer Express?
Here's my connection string:
Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|
antanplan.mdf;Integrated Security=SSPI;User Instance=false;UID=sa;PWD=sa"
And here's the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at WebService.pushJsonAction(String req) in C:Documents and SettingsAlbanMy DocumentsVisual Studio 2008WebSitesWebSite1
antanplan.asmx:line 62
Thank you,
Alban
View 1 Replies
View Related
