Logshipping - Backup And Restore
Sep 6, 2007
Hi
I am new to Forum. So not sure if i am posting my problem under the right topic.
We have a sql server 2005 enterprise edition 4 way cluster on windows 2003 advance server.
I am logshipping these database to a different server at a different location.
My logshipping went fine until one the cluster server failed and the server instance failed over to another node.
The backup that happened around that time got copied over to the secondary by the copy job.
The log file that got copied to the secondary server tried restoring and i think it failed int he middle of restoring it.
(You would think that the sql would knoe if the backup is in complete and will move on to the next file. Not sure what happened there.)
There is no indication of the *.TUF file in the directory where i have the log files.
I tried restoring it manually and i got the following error
Msg 4319, Level 16, State 3, Line 1
A previous restore operation was interrupted and did not complete processing on file 'sessionlog1'. Either restore the backup set that was interrupted or restart the restore sequence.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
I looked in the msdb..log_shipping_secondary_databases and looked for the last file that it restored and tried restoring it again with the following restore command by removing and adding some of the keywords that you see after the "WITH" clause.
MSFT do not recommand to use continne_after_error unless its absolutley necessary. I stilll get the above error.
restore log sessiondata
from disk = 'I:sql13qasmlogssessiondatasessiondata_20070901124516.trn'
with restart, CONTINUE_AFTER_ERROR, norecovery
When i add the restart int he with clause,
The restart-checkpoint file 'J:Microsoft SQL ServerMSSQL.5MSSQLBackupsessiondata.CKP' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.
Msg 4319, Level 16, State 1, Line 1
A previous restore operation was interrupted and did not complete processing on file 'sessionlog1'. Either restore the backup set that was interrupted or restart the restore sequence.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
I checked it the backup directory and i can't locate the .CKP file.
Does anyone ever come accross this issue?
Is there anyother way i could recover this DB in a standby or norecovery mode.
Any kind of help to resolve this issue (beside copy the full backup and redo the whole log-shipping process again) would be appreciated. sicne my primary and secondary server are totally ina different location, i need to ship a tape, if i need a full backup. This is the 3rd time its happening on that cluster. its frustrating to ship a tape everytime this happens.
View 3 Replies
ADVERTISEMENT
Jul 12, 2004
I have setup logshipping between 2 SQL Server 2000 servers. It looks like everything is working (The transaction log files are being created, The log files are being copied to the secondary server. The restore job on the secondary server is running every 15 minutes successfully).
I cannot tell if it is actually applying the transactions.
If it is applying the transactions, it is not updating the monitor.
Does anyone have any ideas what might be causing this problem?
Thanks,
Ken Nicholson
View 1 Replies
View Related
Feb 6, 2008
Hi
We are planning to setup log shipping model being setup between two sqlserver 2005 enterprise edition.
Our transaction log backup sizes are not consistent through out the day.The following is the scenario.
T1 at 8.00 -- 315MB
T2 at 8.30 -- 152MB
T3 at 9.00 -- 2.5GB
T4 at 10.00 -- 500MB
The bandwidth available is 25MB/minute. We are taking the backups of Tlogs at 30mins interval.Now at 'T3' log transfer we want to zip the file on the primary server,copy the file over the WAN and unzip it standby server.
Now i wanted to know whether to perform this kind of action(Zip,copy,unzip), can i create a separate job on primary ?? which will put the unzipped file on standby and allow the log shipping job to restore the log file (T3)
Also i wish to carry my T3,T4 etc backup -- copy-- restores through my Log shipping activity.
I cannot take 15mins backup on primary server to reduce the transaction log backup size.Thts another constraint i have.
Also tell me how to zip and unzip thru command line if u hve any link.
Please advice me
thnks for the help in advance
Regards
Arvind L
View 3 Replies
View Related
Jul 6, 2007
Hai,
I created log shipping btw two servers using maintenance plan.
maintainanace plan taking the log backups and copying those backups in the standby server but unable to restore thos log backups
i am getting the following error ( for the Log Restore job)
Executed as user: NT AUTHORITYSYSTEM. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
In the logshipping monitor history i found the follwing error
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 4305: [Microsoft][ODBC SQL Server Driver][SQL Server]The log in this backup set begins at LSN 4830000001442600001, which is too late to apply to the database. An earlier log backup that includes LSN 4828000001884200001 can be restored.
[Microsoft][ODBC SQL Server Driver][SQL Server]RESTORE LOG is terminating abnormally.
View 4 Replies
View Related
Jun 5, 2015
I am set up log shipping as backup and copy every one hour and restore every ( disconnect users and stand by) one hour on servers in same domain. Set-up completes successfully.Copy job works as expected. but the restore job fails intermittently to restore the .trn file saying ' could not apply log, data invalid' .
when i delete and copy the files for which restore failed manually using CTRL+C and CTRL+V across network and re run the restore job it does restore successfully . Through out the day i get about 5-6 problematic .trn files on secondary server which are copied from primary server and when restore fails i have to manually delete the log file which had problem restoring and then copy that file again using CTRL+C and CTRL+V then run the restore and it gets restored successfully.when running restore filelistonly on the logfile in issue on secondary server it gives below error
Cmd:
RESTORE verifyonly
FROM disk='G:xxxx_Copyxxx_20150604010501.trn'
Error:
Msg 3203, Level 16, State 1, Line 2
Read on "G:xxxxxxx_20150604010501.trn" failed: 13(The data is invalid.)
Msg 3013, Level 16, State 1, Line 2
VERIFY DATABASE is terminating abnormally.
and when i run restore filelistonly using netwok path then is seem s good and i can restore the logs as well
CMD:
RESTORE verifyonly
from disk='1.2.3.4xxx_Backupsxxx_20150604010501.trn'
Output: The backup set on file 1 is valid.I can assure there is no corruption on the log back up, no lsn mismatch, no log files missing.Same version and edition on both servers. Both servers are SQL server 2012 Enterprise edition on window server 2012
View 15 Replies
View Related
Dec 10, 2007
SQL 2000 EE, win 2k3, sql 8.00.2187
Logshipping was working fine till last Friday...Looks like there was a cluster node failover during the weekend on the Secondary SQL cluster....From that time, restore log is not working, I am able to see all the log backup files are being copied to the secondary server...its no the transaction log backup share missing problem......I see this message:
The RESTORE statement could not access file 'J:MSSQLBackupDBName_200712081350.tuf'. Error was '2(The
system cannot find the file specified.)'
I gooled and found that .tuf file has the LSN information as which log needs to be restored next....I looked at the sql error log and tried to restore the next log manually with "norecovery" option, but still get the same message....Is there any other option other than to remove and reconfigure logshipping ?
Thanks,
Ranga
View 6 Replies
View Related
Mar 2, 2006
Hello,
have a question about logshipping and full database backup: during a full database backup the log will be backed up too and emptied. If I run a full backup on databases which is setup for logshipping - does it mean I will loose data on the standby side ?
Thanks in advance,
Bernd
View 1 Replies
View Related
Oct 25, 2015
I am trying to set up log shipping in a clustered server environment. I am pretty confused about the location of the shared folder to be created to put backup created by log shipping job. Which drive should I use either local or clustered shared drive to store the backups in primary server and to copy the same in secondary Server?
View 2 Replies
View Related
Jun 25, 2015
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
View 4 Replies
View Related
Aug 3, 2015
Need to restore database,here's the scenario:
Data got deleted on Friday evening, need to have database restored to FRiday afternoon and also some data has been entered on Monday, which needs to be there.
View 8 Replies
View Related
Apr 1, 2008
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
View 3 Replies
View Related
Oct 17, 2006
I have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
View 3 Replies
View Related
Oct 14, 2007
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
View 16 Replies
View Related
May 17, 2006
I had to replace my hard drive which was going bad. I reinstalled Sql 2005 and now need to restore the backup that I have. I selected Restore Database and chose From Device, and selected the backup location on J: drive and selected the backup file which has no extenstion. I checked the checkbox next to the backup set to restore. Click OK and then I get this error message:
Restore failed for Server
System.Data.SqlClient.SqlError: Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLdataMyDB_Data.MDF" failed with the operating system error 3(The system cannot find the path specified.). (Microsoft.SqlServer.Smo)
I don't know why it is looking for a MDF file as this was never in the Backup folder. Can someone please help me on this? I thought I was doing the right thing making a backup all along and now I can't restore it!
View 2 Replies
View Related
Dec 17, 2001
Is it possisable to restore from tape when the backup was taken from a
different server. ServerA has the tape drive which performs the backups
to tape, but ServerB which is under a different domain wants to restore ServerA database on ServerB, both databases on the two servers are the same
is it possiable to restore a database on ServerB using ServerA file?
View 2 Replies
View Related
May 7, 2001
hello all !!
I suffered a crash on one of my disks on a server runing MS-sql 7.0,and found out my backupexec dosnt really restore a runing version of my database.
which solution would you recomend ,taking in acount i may have a copy of the database on another computer,which files i can restore?
thanks
yochai lam
View 2 Replies
View Related
May 24, 2001
Hi I am operating my databases under "trunc log on checkpoint" mode as I do not need point of failure recoverability.I was performing a recovery test using a backup which resulted in it being unsuccessful .Error Message received was
"Recovery has failed because a nonlogged operation could not be redone.Use the RESTORE statement to restore all data in filegroup PRIMARY to a pt beyond the nonlogged changes"
Isnt sql*server supposed to prevent a non-logged operation while a backup is in progress?Also how do i prevent such a situation from recurring.
If i switch to single user mode before a backup how do i prevent exisiting users from accessing ... without bouncing my sql*server?
View 1 Replies
View Related
Sep 25, 2001
Hi Everyone,
I did a restore of database the user the original database is admin where it says the user is dbo.
After i did the restore i was able to add admin as user and dbowner but when i tried to change the user it said the user already exists.
How do i create the same..enviroment as or the original system with users..i saw a problem i i drop the user and them recreate it then it cannot find the object or the object which are owned by it are lost..could any one help me with this ...so as how to and what do i need to keep track of while restoring the database and configure the server back with same user names and permissions.
Thanks.
Kavitha
View 1 Replies
View Related
Sep 15, 2000
Hi,
I have two databases on two different SQL Servers,our application is updating these two databases simultaniously.So every time these two databases will be in synchronized state.
Now i want to schedule backup for these two Databases.How can i take backup of these two databases at single point of time.
so that if i restore these two backups on corresponding servers,There should not be any conflicts.
Any suggetions please....
Ananth
View 1 Replies
View Related
Sep 6, 2000
How can I backup and restore a database from one server to another. I am new in this business. I need your help please!!!
View 3 Replies
View Related
Jan 29, 2001
I'm trying to backup a database to remote server first i did add a device using USE master
EXEC sp_addumpdevice 'disk', 'NetworkDevice', 'cabaanpubs.bak'
then
BACKUP DATABASE pubs TO NetworkDevice
it gives me an error saying
Server: Msg 3201, Level 16, State 1, Line 1
Cannot open backup device 'NetworkDevice'. Device error or device off-line. See the SQL Server error log for more details.
Server: Msg 3013, Level 16, State 1, Line 1
Backup or restore operation terminating abnormally.
I don't really understand what's goin.
basically i need to synchronize my production database so what am i planning is to take a full backup on that server everynight and then restore it back.
Can some one guide me to take a backup as well as restore on the remoteserver with syntax and what does it mean to add a device...i could not understand.
Is there any other process that's much faster to implement.
i appriciate your support and help .
View 1 Replies
View Related
Aug 30, 2000
Whenever I restore a backup on sqlserver 7.0 and create a new database from it, I always end up having problems with the users existing in the backup.
To enable those users to have access, I end up creating logins with those names and when I try granting those users Database access, I get the error message that the user already exists in the database.
Could some one tell me the right way to restore the backup and having all the users of the database also restored in the proper manner.
View 3 Replies
View Related
Dec 13, 1999
WE are using sqlserver 7.0 & backing full database using Seagate backup ver 7.2 on a tape drive.
I have following questions if anybody could help
1]How do I restore a single table backup from the tape backup without restoring the full database first on the disk & then running import/export
utility to transfer/ copy that particular table to production database.
Is there any third party backup utility which allows for a single / selected table restore?
2]What are the steps or if anybody has the script for tansfering logins/users
with permisssions & without deencrypting the passwords when transfering from one server to another server.
View 1 Replies
View Related
Nov 26, 2006
Hi there,
I am new to administration. i would like to create a development environment out of production database.
for this i have to backup the production database on a regular basis. then use this backup and restore it to a database on different. i can do this task, but i want to automate this task to do it on regular basis.
i would like to schedule my backup time. and immediately after backup i want to restore it to the database on other server, over writing existing data. what is the best way to do this???
thanks,
kishore
View 6 Replies
View Related
Apr 20, 1999
I have a question related to SQL 6.5. We have a SMS 1.2 server which uses SQL 6.5. Two months ago, one of the NT admins did a NT backup of SMS database(sms.db) and then formatted the HD. Now, we need the SMS server back again. We installed the NT server, SMS server snd SQL server on that machine. The problem is, we now want the SQL server to recognize our SMS database (SMS.db file). We don't have any SQL backup of any database (that means, no copy of master database, no copy of other databases. IS THERE A WAY TO RECOVER SO THAT SQL SERVER RECPGNIZE THE SMS DATABASE(SMS.DB FILE)
Please help me out.
I would really appreciate that
Jazib Frahim
View 2 Replies
View Related
Sep 21, 2006
Does some one know how to back up a dts and then restore from a backup?
View 5 Replies
View Related
Feb 2, 2004
I have a database xxxx on server a, I want to copy this DB to server b.How can I do this By back and restore.
WHere can take this back up?I want to take this to a personal folder and wanted to restore to server b from this folder.Is it possible?
Thanks.
View 2 Replies
View Related
Apr 11, 2008
Hi all.,
How to take Backup for whole database and how to restore it.,
which would be the efficient way.,
View 3 Replies
View Related
Apr 16, 2008
Hi,
Can a SQL server 2005 db be backed up and restored on a SQL Server 2008 db ?
Thanks
View 5 Replies
View Related
Jun 2, 2006
Hi
I have 2 databases namely A & B respectively..... I have written a stored procedure that takes the backup of database A ....... Both the databases are operational .... Can I restore this Backup of Database A ...to Database B .... Is it possible. ....
I have read soimething that we can do it but with the Restore command we have to use the with move option...
I dont seem to understand this can someone please help me on this one....
Thanks .......
Kid.
View 1 Replies
View Related
Jan 30, 2008
I am trying to restore the backup from enterprise management studio
i have selected the source of resource from device.Its not displaying the mdf etc files in the select the backup sets to restore..
I can't proceed further.
Please suggest me..
View 6 Replies
View Related
Jul 20, 2005
Hi everyoneI have this situation with backup and restore.I have two instances of sql, sql1 and sql2.Production server is sql1 and test server is sql2.I created database maintenance plan that makes full backup every nighton tape.I would like to make some kind of job or to add steps to job that wascreated with DMplan which will make restore of backuped database to sql2server.How can i do this? How can i read which is the last file backuped ontape?Thanks very muchAlex*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies
View Related
Dec 15, 2007
Hi All,
I've been working developing database on my PC @ work, and sadly enough would like to spend some time on it at home. To these ends I backed up the database at work where it restored fine. However have tried to restore the file at home and am getting an error saying the operating system cannot access the file. Is this something to do with NTFS permissions?
Thanks in advance
Alex
View 3 Replies
View Related
