Long Execution Time When Using Parameter
Dec 20, 2007
Hi all,
If I use the following query for a Dataset and the execution takes a few seconds to show results
SELECT *
FROM dbo.ICParameter
WHERE (PatientID = @ID ) AND (LogTime > DATEADD(day, -1, GETDATE()))
ORDER BY LogTime
If I replace '99010200101' with @ID and enter '99010200101' when prompted for ID, the execution takes forever. Actually I have never got any results even after waiting for 10 minutes.
Could anyone shed some light on this?
Thanks in advance.
View 19 Replies
ADVERTISEMENT
Mar 21, 2007
Hi all,
I have a query, rather complex one to deal with more than 1 million rows, used to run 40 minutes in SQL Server 2000 in query analyzer. Now, it has been 10 hours in SQL Server 2005 in management studio. And still has not finished yet! Anything can go wrong here. Basically nothing changes, except for I have my server upgrade from SQL Server 2000 to SQL Server 2005. Seems something is wrong crazy in SQL Server 2005. Any suggestions?
Thanks,
Ning
View 3 Replies
View Related
Dec 15, 2006
I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
View 1 Replies
View Related
Jun 11, 2015
Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies
View Related
Apr 21, 2007
When I execute a long running procedure, I get timeout errors when other users try to execute other procedures with UPDATE or INSERT statements.
I suspect that the other procedures are trying to execute DML statements on tables that are locked by the long running procedure.
I have a sharred trigger on all my tables that creates and updates records in tables AuditLogDetails and AuditLogParent for keeping a log of modifications. I suspect that tables AuditoLogDetails and AuditLogParent are locked by the long running procedure.
How can I change the LOCKING behavior of the long running procedure to fix the time out errors that I get?
The long running procedure is displayed below.
ALTER PROCEDURE [dbo].[spPostPresenceToHistory2]
@PostDate DateTime,
@Department Int,
@Division Int,
@Testing Bit = 0,
@XDoc xml OUTPUT,
@XDoc2 xml OUTPUT,
@ModifierID varchar(20),
@Comment varchar(200)
AS
BEGIN
BEGIN TRANSACTION
DECLARE @PostCount Int,@PreCount Int,@DiffCount Int
IF @Testing=1
BEGIN
PRINT 'DELETE FROM History2_Presence'
EXEC sp_SetPostingProperties 'History2_Presence',@ModifierID,@Comment
SELECT @PreCount=COUNT(*) FROM History2_Presence
IF EXISTS(SELECT E.ID FROM History2_Personel E WHERE E.PostDate=@PostDate)
BEGIN
DELETE FROM History2_Presence FROM History2_Presence H
INNER JOIN History2_Personel Ps ON H.Personel_ID=Ps.ID AND Ps.PostDate=@PostDate
WHERE Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division AND H.Date_de_Presence=@PostDate
AND EXISTS (SELECT P.ID FROM Presence P
WHERE (P.Date_de_Presence=@PostDate AND P.Personel_ID=H.Personel_ID AND P.Travaille_de_Jour=H.Travaille_de_Jour) OR (P.ID=H.ID))
END
ELSE
BEGIN
DELETE FROM History2_Presence FROM History2_Presence H
INNER JOIN Personel As Ps ON H.Personel_ID=Ps.ID
WHERE Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division AND H.Date_de_Presence=@PostDate
AND EXISTS (SELECT P.ID FROM Presence P
WHERE (P.Date_de_Presence=@PostDate AND P.Personel_ID=H.Personel_ID AND P.Travaille_de_Jour=H.Travaille_de_Jour) OR (P.ID=H.ID))
END
SELECT @PostCount=COUNT(*) FROM History2_Presence
IF @PreCount<>@PostCount
BEGIN
SET @DiffCount = @PreCount-@PostCount
SET @XDoc2.modify('
insert <Table Name="History2_Presence" RecordDeleted="{ sql:variable("@DiffCount") }"/> as last into /Deleted_Records[1]
')
END
END
PRINT 'INSERT INTO History2_Presence'
EXEC sp_SetPostingProperties 'History2_Presence',@ModifierID,@Comment
SELECT @PreCount=COUNT(*) FROM History2_Presence
INSERT INTO [dbo].[History2_Presence]
([ID]
,[User_ID]
,[Personel_ID]
,[Date_de_Presence]
,[Category_Motif_ID]
,[DateEntre]
,[Category_TypeDePresence_ID]
,[Travaille_de_Jour]
,[Heur_Supplementaire_Travaille]
,[prime_transport]
,[Tarif]
,[Jour_Travaille]
,[Montant_Supplementaire_Par_Heur]
,[Salair_par_Jour]
,[Salair_Minimum]
,[IsAutomaticRec])
SELECT [P].[ID]
,[P].[User_ID]
,[P].[Personel_ID]
,[P].[Date_de_Presence]
,[P].[Category_Motif_ID]
,[P].[DateEntre]
,[P].[Category_TypeDePresence_ID]
,[P].[Travaille_de_Jour]
,[P].[Heur_Supplementaire_Travaille]
,[P].[prime_transport]
,[P].[Tarif]
,[P].[Jour_Travaille]
,[P].[Montant_Supplementaire_Par_Heur]
,[P].[Salair_par_Jour]
,[P].[Salair_Minimum]
,[P].[IsAutomaticRec]
FROM [dbo].[Presence] AS P
INNER JOIN Personel As Ps ON P.Personel_ID=Ps.ID
WHERE P.Date_de_Presence=@PostDate AND Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division
AND NOT EXISTS
(SELECT HP.ID FROM History2_Presence HP
WHERE (HP.Date_de_Presence=@PostDate AND HP.Personel_ID=P.Personel_ID AND HP.Travaille_de_Jour=P.Travaille_de_Jour) OR (HP.ID=P.ID))
SELECT @PostCount=COUNT(*) FROM History2_Presence
IF @PreCount<>@PostCount
BEGIN
SET @DiffCount = @PostCount-@PreCount
SET @xdoc.modify('
insert <Table Name="History2_Presence" RecordAdded="{ sql:variable("@DiffCount") }"/> as last into /Inserted_Records[1]
')
END
IF @Testing=0
BEGIN
PRINT 'DELETE FROM Presence'
EXEC sp_SetPostingProperties 'Presence',@ModifierID,@Comment
SELECT @PreCount=COUNT(*) FROM Presence
DELETE FROM Presence FROM Presence P
INNER JOIN Personel As Ps ON P.Personel_ID=Ps.ID
WHERE P.Date_de_Presence=@PostDate AND Ps.Category_Department_ID=@Department AND Ps.Category_Division_ID=@Division
AND EXISTS
(SELECT HP.ID FROM History2_Presence HP
WHERE (HP.Date_de_Presence=@PostDate AND HP.Personel_ID=P.Personel_ID AND HP.Travaille_de_Jour=P.Travaille_de_Jour) OR (HP.ID=P.ID))
SELECT @PostCount=COUNT(*) FROM Presence
IF @PreCount<>@PostCount
BEGIN
SET @DiffCount = @PreCount-@PostCount
SET @XDoc2.modify('
insert <Table Name="Presence" RecordDeleted="{ sql:variable("@DiffCount") }"/> as last into /Deleted_Records[1]
')
END
END
COMMIT TRANSACTION
END
View 1 Replies
View Related
May 7, 2014
I have problems sometimes with a package.
There is and SQL Agent job that starts a package (from a file system using cmd command). Usually job takes 8-10 minutes. But sometimes it get stuck for a long time (1+ hour).
DTexec process can be found with procmon, but it seems it just not doing anything (And package is not logging to file Start of the execution) After long wait it just runs a package quickly.
I've moved a package to SSIS catalog to try to get more detailed logging, but with no luck.
Job starts at 1 PM, package execution starts at 1:49 PM. Without any messages about the execution in SSISDB log.
First I've thought it might be long validation problem, but when package executes validation messages are there and they perform quick.
View 3 Replies
View Related
Oct 27, 2007
Hi all,
I have MS Time Seeries model using a database of over a thousand products each of which has hundreds of cases. It amazingly takes only a few minutes to finish processing the model, but when I click Mining Model Viewer to view the models, it takes many hours to show up. Once the window is open, I can choose model for different products almost instantly. Is this normal?
View 1 Replies
View Related
May 21, 2008
A few pointers would be appreciated.
I am looking at building multiple SSIS packages. There will be some similarities. Flexibility is of highest importance. The main packages will need to connect to SQL Server1 as a source and SQL Server2 as a destination to transfer over dimenion data from multiple databases. (other SSIS packages may need to use SQL Server2 as a source and SQL Server1 as a destination)
For a single dimension table containing column dim_id on the target server (SQLServer2). I need to pass the results of the following SQL and insert into SQLServer2.database.dim_table
select dim.id
from SQLServer1.database08.dim_table
union
select dim.id
from SQLServer1.database07.dim_table
union
select dim.id
from SQLServer1.database06.dim_table
Now next year the names of the databases on SQLServer1 will be database09,database08,database07!
Now so far my best thought is creating views in my destination SQL Server. So I need some way of dropping and recreating the views. Previously in DTS I would expect to see SQL Server connection that I could use as source and destination. Now I can see SQL Server destination but not source? Also How do I just use SSIS to run some SQL. i.e execute a stored procedure, drop and creat views?
Many thanks,
Ells
p.s Flexibility is the key, in the last three months all the ip and server names have changed more than once so need to be as flexible as possible.
View 2 Replies
View Related
Nov 22, 2007
Hi all,
I have a stored procedure that is called from a VB.NET application that takes an enormously long time to execute. In the QA it only takes 10sec but in the application it takes ages. The stored procedure is as follows:
PROCEDURE NAME IS SPTOPTWENTYUSERS
SELECT TOP 20 STRUSERNAME,SUM(INTBYTESRECVD) AS INTDOWNLOAD FROM TBLISAWEBLOGS
WHERE DTELOGDATE BETWEEN @BEGINDATE AND @ENDDATE
GROUP BY STRUSERNAME
ORDER BY INTDOWNLOAD DESC
The code that runs it is as follows:
sSQLString = SPTOPTWENTYUSERS
Using cnn As New SqlConnection(GetPath)
Try
Dim cmd As New SqlCommand(sSQLString, cnn)
Dim dr As SqlDataReader
With cmd
.CommandType = CommandType.StoredProcedure
.CommandTimeout = 0
.Parameters.Add("@BEGINDATE", SqlDbType.DateTime)
.Parameters.Add("@ENDDATE", SqlDbType.DateTime)
.Parameters("@BEGINDATE").Value = dtpStartDate.Value
.Parameters("@ENDDATE").Value = dtpEndDate.Value
End With
cnn.Open()
dr = cmd.ExecuteReader
Any help on why this happens would be much appreciated.
thanks
View 1 Replies
View Related
Nov 11, 2006
I'm generarintg a mail from a trigger, using xp_sendmail.
I use the query parameter to generate the body of the mail, the query is a procedure call with some parameters, one of this is a long string.
when the length is less that 128 work fine, but, when this parameter is longer than 128 charaters, return me the error 103 telling me that it has exceed 128 characteres, and do not send the mail.
I find this quite frustrating, the parameter is limited only to 128 characteres, what could I do.
Thanks in advance
Cheers.
Ale.
View 1 Replies
View Related
Aug 2, 2007
I made a website in ASP.net and using sql server 2005 as database. There is sometime processing data that need long time processing ( about 20 minutes ) and big data. It works fine in dev box, but when I place on shared hosting, and some people access it crashed. The website can not be accessed. Hosting support told me maybe I need to reprogram my code. So anybody has solution for this problem ? Should I create new thread ?
View 3 Replies
View Related
Feb 18, 2000
Hi There,
We have developed a application in VB and connected to SQL Server 6.5, we have some stored procedures where it brings the data from SQL Server 6.5, this application is running since some months, when we run this application it usually take only one minute to generate the report but since couple of days it is taking 25 Minutes to generate the report, even when I run that stored procedure at backend in Query analyzer at Server it is taking 15-20 Minutes to give the result.
please can any one help in identifying the problem, What all the things I need to check to identify it.
Give me the solution.
Thanks in Advance,
Bye,
Madhuker.
View 1 Replies
View Related
Jun 5, 2001
Hi there!,
Problem: I schedule a job that calls a stored procedure which loads around 1.5 million records. The Job takes 19 hrs to complete. However, if i run that stored procedure manually in Query Analyser it takes only 45 minutes..
Did anyone faced this problem? Is this known problem..Any suggestions/recommendations?
thank you.
regards,
Nana
View 6 Replies
View Related
Dec 5, 2014
I have a CTE query that is used to fill in nulls on a history table. The With statement executes just fine. sub 2 seconds on 974 records, however the main query is what's turning the whole query into a turtle. I know that it's the looping that it's doing there that is causing the slow down, but I'm just not sure how to fix it. I've tried inserting it into a temp table, refactored the code a hundred times, but nothing seems to be working.
Code is below and the execution plan is attached.
Server Version: 12.0.2342.0
Enterprise: 64bit
;WITH BuildTable
AS ( SELECT [GEGTH].[ID]
, [GEGTH].[Changed By]
, CAST( [dbo].[GetWeekStarting] ([GEGTH].[Changed Date] , 2 ) AS DATE) AS WeekOf
, [GEGT].[Title]
[code]....
View 6 Replies
View Related
Jun 2, 2008
I had a database of electronic resources which had 28000 records earlies and was working fine. Now we have added a whole bunch to make it 800K records which has increased the search time to 14-22 seconds which is not acceptable. I have all the tables indexed.
Please help me how to solve this problem. Let me know what other information I should put up here to make my problem undestandable.
Thanks in advance,
Archana
View 2 Replies
View Related
Jul 23, 2005
When I login using QA to my SQL Server database, it takes 15-20 secondsto establish a connection and open a query window. Drilling into adatabase via Enterprise Manager is similar. Once the connection isestablished, the server runs plenty fast however.Can someone tell me why it could take a long time for a connection tobe established?This behavior occurs when I am local on the box.Thanks,John
View 1 Replies
View Related
Mar 21, 2008
Hi,I've a strange problem with a INSERT query. It's taking a long time toexecute. The format is like this :INSERT INTO table1SELECT ..FROM table2Executing the SELECT .. FROM table2 is taking 30 seconds. The resultis nothing: no records are selected.When i include the INSERT part it will take 12 hours to completeINSERT INTO table1SELECT ..FROM table2There's is an index on the table and when i delete it, it gives stillthe problem.Keh?Greetz,Hennie
View 1 Replies
View Related
Sep 4, 2007
Hi:
I have a query which returns approximately 50000 records, I am using a linked server to connect to two databases and retrieve data. For some reason it is taking a liitle more than hour to execute the query, but on MS Sql Server query window it comes after few minutes but the query runs for a long time.
How can expediate my query execution process.
Environment details
Database: MS Sql Server 64bit 2005
MS Sql jar file: sqljdbc_1.2.jar
OS: Windows both server and client.
Connect String in java code:
jdbcqlserver://sample_server:1433;databaseName=sample_db;user=admin_user;password=admin_pwd
and use PreparedStatement and ResultSet.
Regards
Arup
View 2 Replies
View Related
May 16, 2007
I'm running a query (see below) on my development server and its taking around 45 seconds. It hosts 18 user databases ranging from 3 MB to 400 MB. The production server, which is very similar but with only 1 25 MB user database, runs the query in less than 1 second. Both servers have been running on VMWare for almost 1 year with no problems. However last week I applied SP 2 to the development server, and yesterday I applied Critical Update KB934458. The production server is still running SQL Server 2005 Standard SP 1. Other than that, both servers are identical and running Windows 2003 Server Standard SP 1. I'm not seeing this discrepancy with other queries running against user databases.
use MyDatabase
GO
select db_name(database_id) as 'Database', o.name as 'Table',
s.index_id, index_type_desc, alloc_unit_type_desc, index_level, i.name as 'Index Name',
avg_fragmentation_in_percent, fragment_count, avg_fragment_size_in_pages,
page_count, avg_page_space_used_in_percent, record_count,
ghost_record_count, min_record_size_in_bytes, avg_record_size_in_bytes, forwarded_record_count,
schema_id, create_date, modify_date from sys.dm_db_index_physical_stats (null, null, null, null, 'DETAILED') s
join sys.objects o on s.object_id = o.object_id
join sys.indexes i on i.object_id = s.object_id and i.index_id = s.index_id
where db_name(database_id) = 'MyDatabase'
order by avg_fragmentation_in_percent desc
--order by avg_fragment_size_in_pages desc
--order by page_count desc
--order by record_count desc
--order by avg_record_size_in_bytes desc
View 4 Replies
View Related
May 31, 2007
i have sql 2000 db of about 120 GB. its taking about 10 -12 hours to restore on the same disk as new database.
server configuration is good.
when i try to restore another db of about 10 GB size, its restoring in about 5 minutes.
View 2 Replies
View Related
Apr 7, 2008
Hi,
It seems inserting records takes a relatively long time. My guess is it needs time to allocate disk space for the extra space needed. Assuming this is true, are there any DB settings that allow auto space allocation in bigger chunk? I am looking for something like "DB growth factor" or " Table growth factor"
Thanks for any info.
View 6 Replies
View Related
Jun 5, 2007
Has anyone had thsi issue, if so what was the fix?
We installed service pack2, the day after 2 of our production jobs started taking a long time to complete and causing a ton of blocking.
it went from running in 2 minutes to now taking 3 hours and 29 minutes to run. Can someone help?
View 5 Replies
View Related
Nov 9, 2007
Dear friends,
Our package which at the time of normal execution takes 2-2:30 mins for fetching data on VPN with some select queries. But some times its job runs for hours and hours. What could be the exact reason behind it? I guess its queries are stuch somewhere, but not when we run from the BIDS or run the job manually.
Please help. Thanks.
View 6 Replies
View Related
Feb 1, 2008
I would like to know how to disable valiation of SSIS when the SSIS runs in server.
The SSIS takes about 20% of time to validate the environment.
Are there any configuration in SSIS to tell SSIS the environment is stable and no validation is required?
Thanks.
View 4 Replies
View Related
Apr 6, 2007
I am designing a project using C#, SQL Express and VSTO.
Every time I change something in the database XSD display i.e add a query or create a new table adapter or configure an existing query, or just move the position of an existing table adapter, Visual Studio locks intself into a never ending loop with 100% processor activity (or 50% with dual processors). It stays in this state for about 4-5 hours and then come back to life.
Is there an option that I need to disable/enable to stop the program from doing this. I will appreciate your help.
Thanks,
Hammad
View 1 Replies
View Related
May 3, 2008
help-take a long time run this stored procedure 15 second
Code Snippet
DECLARE @WantedDate SMALLDATETIME, -- Should be a parameter for SP
@BaseDate SMALLDATETIME,@NumDays TINYINT,@myNum TINYINT
set @myNum=4
SELECT @WantedDate = CAST(CAST(YEAR(GETDATE()) AS nvarchar)+ '-' +CAST(1 AS nvarchar)+ '-' +CAST(@myNum AS nvarchar) AS SMALLDATETIME), -- User supplied parameter value
@BaseDate = DATEADD(MONTH, DATEDIFF(MONTH, '19000101', @WantedDate), '19000101'),
@NumDays = DATEDIFF(DAY, @BaseDate, DATEADD(MONTH, 1, @BaseDate))
select @WantedDate
IF @NumDays = 28
BEGIN
SELECT dbo.v_hasot_all.empID, dbo.v_hasot_all.Fname, dbo.v_hasot_all.day1A, dbo.v_hasot_all.nameday, dbo.tb_mis_hsaot.mishs_txt, CONVERT(datetime,
CAST(dbo.v_hasot_all.nameday AS nvarchar) + '/' + CAST(@myNum AS nvarchar) + '/' + CAST(YEAR(GETDATE()) AS nvarchar), 103) AS date_mis
FROM dbo.v_hasot_all INNER JOIN
dbo.tb_mis_hsaot ON dbo.v_hasot_all.day1A = dbo.tb_mis_hsaot.mishs_int
WHERE (NOT (dbo.v_hasot_all.nameday IN (29, 30, 31)))
END
ELSE IF @Numdays = 29
BEGIN
SELECT ...............
WHERE (NOT (dbo.v_hasot_all.nameday IN ( 30, 31)))
END
ELSE IF @Numdays = 30
BEGIN
SELECT ......................
WHERE (NOT (dbo.v_hasot_all.nameday IN (31)))
END
ELSE IF @Numdays = 31
BEGIN
SELECT dbo.v_hasot_all.empID, dbo.v_hasot_all.Fname, dbo.v_hasot_all.day1A, dbo.v_hasot_all.nameday, dbo.tb_mis_hsaot.mishs_txt, CONVERT(datetime,
CAST(dbo.v_hasot_all.nameday AS nvarchar) + '/' + CAST(@myNum AS nvarchar) + '/' + CAST(YEAR(GETDATE()) AS nvarchar), 103) AS date_mis
FROM dbo.v_hasot_all INNER JOIN
dbo.tb_mis_hsaot ON dbo.v_hasot_all.day1A = dbo.tb_mis_hsaot.mishs_int
END
and whan i run my code separately it run fast
i think it is the ELSE IF @Numdays
TNX
View 5 Replies
View Related
Oct 3, 2015
I hope to update a DateTime column value with a Time input parameter. Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
View 14 Replies
View Related
Nov 20, 2006
Hi All,
I've got a problem with increasingly long parameter lists for SProcs... Especially when one calls another SProc, and so on. Is there any way around this? Like can you dynamically construct a string and pass that? I'm just looking to see if more experienced players have found ways around this, or have just dealt with it by using well formed code.
Thanks
Chris
View 7 Replies
View Related
Sep 14, 2015
At the moment I already added the DataSet I'm gonna be using. I have 2 date parameters Start Time and End Time.
What I would like to do for the report is to only pull results greater than 48 hours to the report
How can I accomplish this?
View 4 Replies
View Related
Oct 13, 2003
Sometime is necessary to stop MSSQLSeverOLAPServieces to do a full backup in my OLAP Server disks. After backup had finished and I tried to star MSSQLSeverOLAPServieces but it takes almost 30 minutes to the services starts.
What can it be causing that?
Paulo
View 5 Replies
View Related
Aug 2, 1999
I have a stored procedure that normally takes about 5 hours to complete:
DELETE tblX WHERE PROC_DT < dateadd(day, -93 , getdate())
tblX has about 55 million records and has an index on PROC_DT.
I have this running as a scheduled task. Over the weekend, the task executed and it is still running 56+ hours later. Does anybody have any ideas as to where I should look for the problem? I am afraid to kill the process because of the rollback time.
View 4 Replies
View Related
Mar 7, 2002
Hi,
I have a table with 48 million rows,when i executed following update query it is taking 10 HOURS in SQL SERVER 2000 with SP1.
Where as when i executed same query in SQL SERVER7.0 with same table then it is taking 13 MINUTES. Comming to Machine...SQL 2000 Server has more processors and greater memory than SQL 7.0 m/c.
It looks strange but this is true.Does any one faced such problem..is there any bug in SQL 2000?????
Here is Query::
update cus_pay_jan_dist set univ_regdate = b.dayid
from cus_pay_jan_dist a with (nolock), tm_dayids b with (nolock)
where a.univ_regdate = b.dayidnum and a.univ_regdate like '2001%'
Thanks
Ananth
View 6 Replies
View Related
Jan 12, 2004
I use MS ACCESS and tables linked to MS SQL SERVER tables.
There are indexes defined (they are visible in MS ACCESS too).
Sometimes DLOOKUP functions are taking long time.
Why?
View 3 Replies
View Related
