Long Running Query In SQL 2005 But Works Fine In SQL 2000
Mar 28, 2008
I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.
I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.
/* Update WeekEnding Date for current weeks WeeklySales Records */
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null
Weekly sales has approx 100,000,000 rows
Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.
I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.
One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.
if have a problem with a SELECT query that works very fine on SQL Server 2000 but not on 2005. I've transfered my db by creating a full backup and restoring the db on 2005. The db is working except this problem.
When i start executing it doesn't finish. I waited a couple of minutes. On 2000 it only takes about 6 seconds to run.
Here it is:
Code Snippet
SELECT * FROM PPS_TERMbesttmpwhere PPS_TermBestTmp.BestNr + CONVERT(varchar(30),CAST(REPLACE(PPS_TermBestTmp.Pos1, ',', '.') AS float),2)
NOT IN (SELECT PPS_TermBest.BestNr + CONVERT(varchar(30), PPS_TermBest.Pos1,2) FROM PPS_TermBest) Any ideas?
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.
any one know why that might be the case??
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone where contact.phone_num is not null and contact.status = 'New Contact' group by contact._id order by "recency" desc, "frequency" desc
i've included the union query here for completeness of the question
begin declare @current_date datetime set @current_date = GETDATE()
select top 100 _id, callback_date, priority, recency, frequency from ( ( select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min" from topcat.class_contact where status ='callback' and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) and (DATEPART(hour, callback_date) <> 0) order by callback_date asc --order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc ) union ( select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency from topcat.class_contact where status = 'callback' and callback_date is not null and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) and (DATEPART(hour, callback_date) = 0) order by callback_date asc ) union ( select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency from topcat.class_contact where status = 'No Connect' and callback_date is not null and (DATEPART(year, callback_date) <= DATEPART(year, @current_date)) and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date)) order by callback_date asc ) union ( select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone where contact.phone_num is not null and contact.status = 'New Contact' group by contact._id order by "recency" desc, "frequency" desc ) ) contact_queue order by priority desc, recency desc, callback_date asc, frequency desc
We have one LEDGER, where all the daily activities are stored. The LEDGER table has 4 indexes (1 clustered and 3 non-clustered). To get AR we use this table.
Well problem is some times in 1-2 months, any simple AR query takes a long time and every other client gets slow response (queries are very slow or sometimes block).
If we DROP any index on LEDGER table and again put it back (RECREATE), all our queries work fine and faster. This goes on till 1-2 months, till we see the same issue again.
This is a classic case happened today. Queries were running fine till morning 8 AM. We upload some 50 thousand records to Ledger table (Data Conversion). Well after 30 mins, all simple AR queries started taking a long time. We DROPPED an index in LEDGER table and everything was faster....Just to be same we added back the same index again.......everything is Faster.....
What is this. ....is it our QUERY, index or huge Transactions or no free space ???
We are scheduled to run SP4, next week. But is there any solution in the mean time on what is this?
Also is they any way to KILL all SQL server processes that take more than a mins. We just don't want ALL our client to Slow down because of one query????
The following query works in SQL Server 2000 but gives follwoing error in SQL Server 2005
Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to float.
=======================
SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL AND VWCONTACT.EMAIL LIKE '%@%' AND NOT EXISTS (SELECT VWCONTACT.ID FROM (SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) >= 77002) TMP0 ON VWCONTACT.ID = TMP0.CONTACTID JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) <= 77099) TMP1 ON VWCONTACT.ID = TMP1.CONTACTID WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1 WHERE VWCONTACT.ID = NESTEDQUERY1.ID) AND NOT EXISTS (SELECT VWCONTACT.ID FROM (SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77336) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77338) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77345) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77365) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77396) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77489) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77504) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77598)) ATTR ON ATTR.CONTACTID = VWCONTACT.ID WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1 WHERE VWCONTACT.ID = NESTEDQUERY1.ID) AND NOT EXISTS (SELECT VWCONTACT.ID FROM (SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 23102 AND ATTRIBUTEVALUE = 'Houston') TMP0 ON VWCONTACT.ID = TMP0.CONTACTID JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 22944 AND ATTRIBUTEVALUE = 'TX') TMP1 ON VWCONTACT.ID = TMP1.CONTACTID WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1 WHERE VWCONTACT.ID = NESTEDQUERY1.ID)
when I modify the query like the following in SQL Server 2005 it works. Now the problem is since it is adynamically generated query from our application based on users selection of criteria, it means a lot to us to change the code.
SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL AND VWCONTACT.EMAIL LIKE '%@%'
EXCEPT
((SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) >= 77002) TMP0 ON VWCONTACT.ID = TMP0.CONTACTID JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) <= 77099) TMP1 ON VWCONTACT.ID = TMP1.CONTACTID WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) UNION (SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77336) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77338) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77345) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77365) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77396) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77489) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77504) OR (CONTACTATTRIBUTEID = 22943 AND ISNUMERIC(ATTRIBUTEVALUE) = 1 AND CONVERT(float,ATTRIBUTEVALUE) = 77598)) ATTR ON ATTR.CONTACTID = VWCONTACT.ID WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) UNION (SELECT DISTINCT VWCONTACT.[ID] ID FROM VWCONTACT JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 23102 AND ATTRIBUTEVALUE = 'Houston') TMP0 ON VWCONTACT.ID = TMP0.CONTACTID JOIN (SELECT CONTACTID FROM VWCONTACTATTRIBUTEVALUE WHERE CONTACTATTRIBUTEID = 22944 AND ATTRIBUTEVALUE = 'TX') TMP1 ON VWCONTACT.ID = TMP1.CONTACTID WHERE VWCONTACT.ACCOUNTID = 2615 AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ))
If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?
The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.
I am attempting to move some SQL 2000 databases to SQL 2005. My main production database does not seem to want to move. When I use the SQL 2005 GUI the .bak backup file is marked 'Incomplete'. When I attempt to restore the backup file I get a 'RESTORE detected an error on page (0:0) in database' message. I saw a thread in the SQL Express forum suggesting trying to restore from the T-SQL level to get the GUI out of the picture and I get the same 'error on page (0:0)' message. However when I take the same file and use SQL 2000 Enterprise Manager it restores with no problems.
I have a pretty complex query that aggregates lots of data and inserts multiple rows of that data into a reporting table. When I call this SPROC from SQL Server Management Studio, it executes in under 3 seconds. When I try to execute the same SPROC using .NET's SqlCommand object the query runs indefinitely until the CommandTimeout is reached. Why would this SPROC behave differently with the same inputs, but being called from .NET? Thanks for your help!
I'm trying to optimize a long running (several hours) query. This query is a cross join on two tables. Table 1 has 3 fields - ROWID, LAt and Long. Table 2 has Name, Addr1,Addr2,City,State,Zip,Lat,Long.
Both tables has LatRad - Lat in radians, LonRad- Lon in Radians. Sin and Cos values of Lat and Lon are calulated and stored to be used in the distance formula.
What I'm trying to do here is find the nearest dealer (Table 2) for each of Table 1 rows. The Select statement takes a long time to execute as there are about 19 million recs on table 1 and 1250 rows in table 2. I ran into Log issues- filling the transaction log, so I'm currently using table variables and split up the process into 100000 recs at a time. I cross join and calculate the distance (@DistValues) and then find the minimum distance (tablevar2) for each rowid and then the result is inserted into another Table (ResultTable).
distance=3963.1*Case when cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15)) not between -1.0 and 1.0 then 0.0 else acos(cast(S.SinLat * T.SinLat + S.CosLat * T.cosLat * cos(T.Lonrad - s.Lonrad) as numeric(20,15))) end
from dbo.TopNForProcess T , dbo.Table2 S where Isnull(T.Lat,0) <> 0 and Isnull(T.Lon,0)<> 0
Insert into @MinDistance
Select DataSeqno,Min(distance) From @DistValues Group by DataSeqno
Insert into ResultTable (DataSeqno,Lat2,Lon2,StoreNo,LAt1,Long1,distance)
Select D.DataSeqno, D.Lat2, D.Lon2, D.StoreNo, D.LAt1, D.Long1, M.distance from @DistValues D Inner Join @MinDistance M on D.DataSeqno = M.DataSeqno and D.Distance = M.Distance
I created a View called TopNForProcess which looks like this. This cut down the processing time compared to when I had this as the Subquery.
SELECT TOP (100000) DataSeqno, lat, Lon, LatRad, LonRad, SinLat, cosLat, SinLon, CosLon FROM Table1 WHERE (DataSeqno NOT IN (SELECT DataSeqno FROM dbo.ResultTable)) AND (ISNULL(lat, 0) <> 0) AND (ISNULL(Lon, 0) <> 0)
I have indexes on table table1 - Rowid and another one with Lat and lon. Table2 - Lat and Long.
Is there any way this can be optimized/improved? This is already in a stored procedure.
The query show below is designed to use seasonal profiles to compute 53 weeks of forecast data and then from that compute the number of weeks of supply of each item at each location. The query works but the volume of data produced (20+M rows) is substantial. If I limit the CTE to a single location, it run is 2 seconds and returns 41,000 rows. But when run for all locations and items, it runs for more than 4 hours. Would I do better converting the CTE to a sub-query and adding an index to improve the performance of the main query?
WITH Forecast AS
(SELECT Location_Idx
,Item_Idx
,Week_Code
,(CAST(AnnualQty AS DECIMAL(9))/53.0)*[Profile] AS fcst
FROM dbo.FactReplenishmentProfile rp
INNER JOIN dbo.FactSeasonalProfile sp
ON sp.SeasonalProfile_Idx = rp.SeasonalProfile_Idx
)
SELECT fcst1.Location_Idx
,fcst1.Item_Idx
,fcst1.Week_Code
,fcst1.fcst AS WeekQty
,SUM(fcst2.fcst) AS CumQty
FROM Forecast fcst1
INNER JOIN Forecast fcst2
ON fcst2.Location_Idx = fcst1.Location_Idx
AND fcst2.Item_Idx = fcst1.Item_Idx
AND fcst2.Week_code <= fcst1.Week_Code
GROUP BY fcst1.Location_Idx,fcst1.Item_Idx,fcst1.Week_code,fcst1.fcst
I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error
Error: 2008-03-24 13:52:40.22 Code: 0xC0202009 Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.".
I am able to run the package outside the sql job and also connect to the oracle. I have oracle 9i client installed on the server and sql server is 2005.
I am having a problem executing long running queries from an ASP applicationwhich connects to SQL Server 2000. Basically, I have batches of queries thatare run using ADO in a loop written in VBScript. This works pretty welluntil the execution time of a single query starts to exceed some threshold,which I am trying to narrow down. I can typically run 2 - 10 queries in aloop, with the run time being anywhere from under a minute to an hour ormore. Now that this application is being subjected to run against some largedatabases (25 - 40G), I'm having problems getting the application tocontinue beyond the first query if it takes a while to run.I used SQL Profiler to try to diagnose what was going on. I can see thequery executes to completion, but immediately after completing I can see an"Audit Logout" message, which apparently means that the client hasdisconnected. The query durations vary from 45 or 50 minutes to up to over90 minutes. I have the ADO connection and query timeouts set to very largevalues, e.g. 1000 minutes, so I can't think its that. My guess is that thereis some IIS setting or timeout that I am running up against and theconnection to SQL Server is just dropped for some reason.The configuration isNT 4.0 SP6SQL Server 2000 SP3IIS 4.0Internet Explorer 5.5I'm only running into this problem on the very largest databases we runagainst. The vast majority continue to function properly, but this is goingto happen more often as time goes on the databases continue to grow in size.Any advice is appreciated,-Gary
I have a query which used to run fine on a rubbish SQL 2000 box in about a minute, but with SQL 2005 (SP2) it never finishes, even when left overnight. No errors in the logs or anything. It is the same database which was backed up from SQL 2000 and restored into 2005. Does anybody have any ideas?
Cheers Steve
SELECT DISTINCT R1.RowVersionId, R2.EnumID AS A, R2.EnumID AS B, R4.EnumID AS C, R6.EnumID AS D, R8.EnumID AS E, R10.EnumID AS F, R12.EnumID AS G, R14.EnumID AS H
FROM
RowRuns AS R1
INNER JOIN XRunConfigEnum AS R2 ON R1.RunVersionID = R2.RunVersionId
INNER JOIN RowRuns AS R3 ON R1.RowVersionId=R3.RowVersionId
INNER JOIN XRunConfigEnum AS R4 ON R3.RunVersionID = R4.RunVersionId
INNER JOIN RowRuns AS R5 ON R1.RowVersionId=R5.RowVersionId
INNER JOIN XRunConfigEnum AS R6 ON R5.RunVersionID = R6.RunVersionId
INNER JOIN RowRuns AS R7 ON R1.RowVersionId=R7.RowVersionId
INNER JOIN XRunConfigEnum AS R8 ON R7.RunVersionID = R8.RunVersionId
INNER JOIN RowRuns AS R9 ON R1.RowVersionId=R9.RowVersionId
INNER JOIN XRunConfigEnum AS R10 ON R9.RunVersionID = R10.RunVersionId
INNER JOIN RowRuns AS R11 ON R1.RowVersionId=R11.RowVersionId
INNER JOIN XRunConfigEnum AS R12 ON R11.RunVersionID = R12.RunVersionId
INNER JOIN RowRuns AS R13 ON R1.RowVersionId=R13.RowVersionId
INNER JOIN XRunConfigEnum AS R14 ON R13.RunVersionID = R14.RunVersionId
WHERE
((R2.ParamID='ee72510e-3bab-49f6-1ff9-4d09cbe8670a' AND (R2.EnumID = '1a2868fb-72ef-e1d3-e79d-fbb5814ab481')))
AND
((R4.ParamID='7aadb3a4-3d13-8e0d-bfa4-4243ed1fdb35' AND (R4.EnumID = '745fb00c-0b16-7b4e-bf8f-da0f46777ca0')))
AND
((R6.ParamID='8c9aee3a-df1f-6ec5-131a-8fa0309ce1ff' AND (R6.EnumID = 'c7af1456-56bc-ba9c-f1e4-95cfd5542d10')))
I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.
Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.
Hi, I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.
Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 9:24:30 AM Error: 2008-03-18 09:24:32.54 Code: 0xC0202009 Source: IMALCRM Connection manager "IMAL SRC" Description: An OLE DB error has occurred. Error code: 0x800703E6. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H result: 0x800703E6 Description: "Invalid access to memory location.". End Error Error: 2008-03-18 09:24:32.54 Code: 0xC020801C Source: Load Fund Detail V_FUND_DETAIL [16] Description: The AcquireConnection method call to the connection manager "IMA L SRC" failed with error code 0xC0202009. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0047017 Source: Load Fund Detail DTS.Pipeline Description: component "V_FUND_DETAIL" (16) failed validation and returned er ror code 0xC020801C. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC004700C Source: Load Fund Detail DTS.Pipeline Description: One or more component failed validation. End Error Error: 2008-03-18 09:24:32.54 Code: 0xC0024107 Source: Load Fund Detail Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:24:30 AM Finished: 9:24:32 AM Elapsed: 2.078 seconds
If this post belongs somewhere else I appologize. I have spent several days trying to solve this problem with no luck. My site is online. Hosted at NeikoHosting. I can connect to the database remotely when adding a datacontrol. It tests fine. But when running the page it won't connect. Even if I go in and change the Web.Config connection string to a local Data Source provided to me by Neiko, it still won't work. It just won't connect. Here are the two connection strings in the Web.Config, minus my login info: Only the remote string will pass testing. Neither works on the site. <add name="yourchurchmychurchDBConnectionString" connectionString="Data Source=MSSQL2K-A;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" /> <add name="yourchurchmychurchDBConnectionString2" connectionString="Data Source=66.103.238.206;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" /> Here is the stack trace, if that helps. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
My DTS Package work fine if I Execute it manually, but I need to do it automatically just after midnight. I defined my schedule and made sure the job was present in the SQL Server Agent>Jobs, but it fails and the Job History shows the following error:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 1901 (76D) Error string: [Microsoft][ODBC Microsoft Access Driver] Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
I have a report which has multivalue parameters enabled and If i give NULL it displays everything correctly. But if I give different ClientId it doesnt do it in the report.. But if i run my sproc in VS2005 and in ssms it works the way i want it. this is my sproc
Code Snippet set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]
@StartDate datetime, @EndDate datetime, @ClientId nvarchar(max)= NULL AS Declare @SQLTEXT nvarchar(max) if @ClientId is NULL BEGIN SELECT o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId --cp.ClientId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId -- and o.CreatedByUserId = cp.UserId Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE --cp.ClientId = @ClientId --AND o.OrderDate BETWEEN @StartDate AND @EndDate ORDER BY o.OrderId DESC END ELSE BEGIN SELECT @SQLTEXT = 'Select o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId --cp.ClientId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId --AND cp.ClientId in ('+ convert(Varchar, @ClientId) + ' ) Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE cp.ClientId in (' + convert(Varchar,@ClientId) + ') AND o.OrderDate BETWEEN ''' + Convert(varchar, @StartDate) + ''' AND ''' + convert(varchar, @EndDate) + ''' ORDER BY o.OrderId DESC' exec(@SQLTEXT) END --return (@SQLTEXT)
I have 2 datasets in this report one for the above sproc and other dataset that gives me the clientname and it is as follows
Code Snippet
ALTER Procedure [dbo].[usp_GetClientsAll]
@ClientId nvarchar(max) = NULL
AS
--Declare @ClientId nvarchar(max)
SELECT
NULL ClientId,
'<All Clients >' ClientName
FROM
Client
Union
SELECT
ClientId,
ClientName
FROM
Client
Where
ClientId = @ClientId
OR
(
ClientId = ClientId
OR
@ClientId IS NULL
)
In the first dataset Parameter list i have omitted ClientId but kept it in the report parameter.. So when i give select all it works.. but when i just select particular it gives me the same result as Select all..
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.
The error that I'm getting is this:
[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.
[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.
[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.
[rsNone] An error has occurred during report processing.
Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!
Hey I had a table with a column of data encrypted in a format. I was able to decrypt it and then encrypt it using Symmetric keys and then updating the table column with the data. Now, there is a user sp which needs to encrypt the password for the new user and put it in the table. I'm not being able to make it work. I have this so far. Something somewhere is wrong. I dont know where. Please help Thanks. I used the same script to do the encryption initially but that was for the whole column. I need to see the encrypted version of the @inTargetPassword variable. But it's not working. It doesn't give me an error but gives me wrong data...
People,I'm trying to publish my first website and am having a few problems.I've got Visual Web Developer 2005 Express and am trying to use the Personal Website Starter Kit. (my SQL server is SQL Server Express Edition 2005 - which is also running on my local machine)It seems to work fine when I run it on my localhost, as soon as I ftp it up to my web hosting company, I get an error message (see below) :-An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) My hypothesis is :-It would appear to me that when running locally, the starter kit website uses my installation of SQL 2005 Express Edition, but when I upload all the files, I'm guessing the application is still trying to point at a local instance of SQL on my local PC which it now cannot see. I'm guessing I need to somehow upload the SQL database onto my web host (I've purchased 100M of SQL Server 2005 space), and point the application at that SQL instance instead. But I don't know if I'm right about all this, or indeed how to do it if I am. Can anyone help?Much thanks in advance,Will
works fine in designer but when i load the report services I get the following error anybody know what to do there is one subreport with this report maybe the passing value but what could be wrong ????
Item has already been added. Key in dictionary: '9' Key being added: '9'
The user permissions are set the same in both 2000 and 2005 can you please explain what changed and what are the minimum permissions need for the user to be able to make these changes to the temporary table which the user created.
Try this script to see what queries are taking over a second.To get some real output, you need a long-running query. Here's one(estimated to take over an hour):PRINT GETDATE()select count_big(*)from sys.objects s1, sys.objects s2, sys.objects s3,sys.objects s4, sys.objects s5PRINT GETDATE()Output is:session_id elapsed task_alloc task_dealloc runningSqlText FullSqlTextquery_plan51 32847 0 0 select count_big(*) from sys.objects s1, sys.objects s2,sys.objects s3, sys.objects s4, sys.objects s5 SQL PlanClicking on SQL opens the full SQL batch as a .txt file, including the PRINTstatementsClicking on Plan allows you to see the .sqlplan file in MSSMS========Title: Using a VB Script to show long-running queries, complete with queryplans.Today (July 14th), I found a query running for hours on a development box.Rather than kill it, I decided to use this opportunity to develop a scriptto show long-running queries, so I could see what was going on. (ReferenceRoy Carlson's article for the idea.)This script generates a web page which shows long-running queries with thecurrently-executing SQL command, full SQL text, and .sqlplan files. The fullSQL query text and the sqlplan file are output to files in your tempdirectory. If you have SQL Management Studio installed on the localcomputer, you should be able to open the .sqlplan to see the query plan ofthe whole batch for any statement.'LongestRunningQueries.vbs'By Aaron W. West, 7/14/2006'Idea from:'http://www.sqlservercentral.com/columnists/rcarlson/scriptedserversnapshot.asp'Reference: Troubleshooting Performance Problems in SQL Server 2005'http://www.microsoft.com/technet/prodtechnol/sql/2005/tsprfprb.mspxSub Main()Const MinimumMilliseconds = 1000Dim srvnameIf WScript.Arguments.count 0 Thensrvname = WScript.Arguments(0)Elsesrvname = InputBox ( "Enter the server Name", "Server", ".", VbOk)If srvname = "" ThenMsgBox("Cancelled")Exit SubEnd IfEnd IfConst adOpenStatic = 3Const adLockOptimistic = 3Dim i' making the connection to your sql server' change yourservername to match your serverSet conn = CreateObject("ADODB.Connection")Set rs = CreateObject("ADODB.Recordset")' this is using the trusted connection if you use sql logins' add username and password, but I would then encrypt this' using Windows Script Encoderconn.Open "Provider=SQLOLEDB;Data Source=" & _srvname & ";Trusted_Connection=Yes;Initial Catalog=Master;"' The query goes heresql = "select " & vbCrLf & _" t1.session_id, " & vbCrLf & _" t2.total_elapsed_time AS elapsed, " & vbCrLf & _" -- t1.request_id, " & vbCrLf & _" t1.task_alloc, " & vbCrLf & _" t1.task_dealloc, " & vbCrLf & _" -- t2.sql_handle, " & vbCrLf & _" -- t2.statement_start_offset, " & vbCrLf & _" -- t2.statement_end_offset, " & vbCrLf & _" -- t2.plan_handle," & vbCrLf & _" substring(sql.text, statement_start_offset/2, " & vbCrLf & _" CASE WHEN statement_end_offset<1 THEN 8000 " & vbCrLf & _" ELSE (statement_end_offset-statement_start_offset)/2 " & vbCrLf & _" END) AS runningSqlText," & vbCrLf & _" sql.text as FullSqlText," & vbCrLf & _" p.query_plan " & vbCrLf & _"from (Select session_id, " & vbCrLf & _" request_id, " & vbCrLf & _" sum(internal_objects_alloc_page_count) as task_alloc, " &vbCrLf & _" sum (internal_objects_dealloc_page_count) as task_dealloc " &vbCrLf & _" from sys.dm_db_task_space_usage " & vbCrLf & _" group by session_id, request_id) as t1, " & vbCrLf & _" sys.dm_exec_requests as t2 " & vbCrLf & _"cross apply sys.dm_exec_sql_text(t2.sql_handle) AS sql " & vbCrLf & _"cross apply sys.dm_exec_query_plan(t2.plan_handle) AS p " & vbCrLf & _"where t1.session_id = t2.session_id and " & vbCrLf & _" (t1.request_id = t2.request_id) " & vbCrLf & _" AND total_elapsed_time " & MinimumMilliseconds & vbCrLf & _"order by t1.task_alloc DESC"rs.Open sql, conn, adOpenStatic, adLockOptimistic'rs.MoveFirstpg = "<html><head><title>Top consuming queries</title></head>" & vbCrLfpg = pg & "<table border=1>" & vbCrLfIf Not rs.EOF Thenpg = pg & "<tr>"For Each col In rs.Fieldspg = pg & "<th>" & col.Name & "</th>"c = c + 1Nextpg = pg & "</tr>"Elsepg = pg & "Query returned no results"End Ifcols = cdim filenamedim WshShellset WshShell = WScript.CreateObject("WScript.Shell")Set WshSysEnv = WshShell.Environment("PROCESS")temp = WshShell.ExpandEnvironmentStrings(WshSysEnv("TEMP")) & ""filename = temp & filenameDim fso, fSet fso = CreateObject("Scripting.FileSystemObject")i = 0Dim cDo Until rs.EOFi = i + 1pg = pg & "<tr>"For c = 0 to cols-3pg = pg & "<td>" & RTrim(rs(c)) & "</td>"Next'Output FullSQL and Plan Text to files, provide links to themfilename = "topplan-sql" & i & ".txt"Set f = fso.CreateTextFile(temp & filename, True, True)f.Write rs(cols-2)f.Closepg = pg & "<td><a href=""" & filename & """>SQL</a>"filename = "topplan" & i & ".sqlplan"Set f = fso.CreateTextFile(temp & filename, True, True)f.Write rs(cols-1)f.Closepg = pg & "<td><a href=""" & filename & """>Plan</a>"'We could open them immediately, eg:'WshShell.run temp & filenamers.MoveNextpg = pg & "</tr>"Looppg = pg & "</table>"filename = temp & "topplans.htm"Set f = fso.CreateTextFile(filename, True, True)f.Write pgf.CloseDim oIESET oIE = CreateObject("InternetExplorer.Application")oIE.Visible = TrueoIE.Navigate(filename)'Alternate method:'WshShell.run filename' cleaning uprs.Closeconn.CloseSet WshShell = NothingSet oIE = NothingSet f = NothingEnd SubMain
Hi.. I am getting a xml stream of data and putting it to a object and then calling a big sproc to insert or update data in many tables across my database... But there is one Table that i am having trouble inserting it.. But if i run an update it works fine... This my code for that part of the sproc.. IF Exists( SELECT * FROM PlanEligibility WHERE PlanId = @PlanId ) BEGIN UPDATE PlanEligibility SET LengthOfService = Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS ELSE @rsLengthOfService END, EligibilityAge = CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, EntryDates = @EntryDates, EligiDifferentRequirementsMatch = Case When @PD_EmployeeContribution = 0 Then 0 When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --@CompMatchM, LengthOfServiceMatch = CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END, EligibilityAgeMatch = CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, OtherEmployeeExclusions = @OtherEmployeeExclusions WHERE PlanId = @PlanId END ELSE BEGIN INSERT INTO PlanEligibility ( PlanId, LengthOfService, EligibilityAge, EntryDates, EligiDifferentRequirementsMatch, LengthOfServiceMatch, EligibilityAgeMatch, OtherEmployeeExclusions ) VALUES ( @PlanId, Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS ELSE @rsLengthOfService END,--@rsLengthOfService, CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, --@EligibilityAge, @EntryDates, Case When @PD_EmployeeContribution = 0 Then 0 When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --having trouble here CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END, CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, --EligibilityAgeMatch,@EligibilityAgeMatch, @OtherEmployeeExclusions ) END Any help will be appreciated.. Regards, Karen
I have several SQL 2000 servers I need to setup transactional (non updatable) replication with. The structure is:
SQL Server 2000 as Publisher/Distributor
SQL Server 2005 Standard as Subscriber
The connection is via the Internet with snapshots using FTP.
I setup the first set (2 databases at location A). They work wonderfully. I created the publication and then subscribed using MGMT Studio for 2K5.
II am setting up the same scenario for location B. Here is my problem:
In MGMT Studio I connect to the publisher (SANDRA). I right-click a publication and choose New Subscriptions..., the publication is already selected. I click next - Run each agent at its Subscriber is selected and the only option (this is desired), I click Next
HERE IS THE PROBLEM:
On the Subscriber's screen there are no Subscribers listed. When setting up location A the subscribing server was listed and I could choose a database. The Next button is greyed out and there is no way to create/add one.
I tried setting up the subscription by right-clicking the subcribing server's Replication folder in MGMT Studio but I get the same result (except that I have to authenticate with the publishing server which works fine).
WHAT'S DIFFERENT:
Location A is SQL Server Standard (SP3) running on SBS2K3. It is obviously on a domain and so SQL Server and the SQL Agent are running under domain accounts. Location B is a Windows XP SP2 machine running SQL Server Personal Edition (it actually says Development Edition in the properties window).
The databases are the same strucutre, different data. At location A the firewall is set to allow 1433->*any* and *any*->1433 where *any* is 1024 or higher. On the XP machine the firewall is set to allow port 1433. I don't think this is the issue because I've turned the firewall off on the XP machine and I get the same result.
We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
I have a report problem. I'm using a parameter to dynamically control visibility for two tables. If the parameter is set to one value, I want to switch one of the tables to invisible, if the parameter is set to another, I want the other table to be invisible instead.
This all works fine in Visual Studio. When I publish it to my report server, the visibility controls no longer function and both tables always display. Any ideas here?
